ProLiant ML10 v2: SUSE SLES 12 initialization failed on the Proliant ML10 v2

Similar Questions

• Whenever I start my computer, I get "0 x 80070006 initialization failed. The handle is invalid. »

  Whenever I start my computer, I get "0 x 80070006 initialization failed. The handle is invalid. "How can I fix it?

  Since my answer does not resolve your problem, please do not mark it as the answer.  I would like to deselect you.  Thank you.

  Try a clean boot of your PC and see if the error persists. Exactly how is determined by your version of WIndows and so far you have not updated this thread to let know us what version of Windows you are using.  Do now.  Click on modify under your original message and change the drop-down windows to indicate your version of Windows.

  You can also see items here: http://support.microsoft.com/search/default.aspx?mode=a&query=perform+a+clean+boot&spid=global&catalog=LCID%3D1033&1033comm=1&ast=25&ast=28&ast=30&ast=31&res=10

• vCenter Storage Monitoring Service Service initialization failed after the upgrade from 5.1 to 5.5

  I recently upgraded from vCenter 5.1 to 5.5. After the upgrade, I started getting health warnings for the VMware vCenter monitoring of Storage Service that say "failed to initialize the Service." I restarted the vCenter server and restart services several times and who has not deleted the question. When I look in the SMS. LOG file there is no activity in it since I did the upgrade (a week or more there). All prior activity in the SMS. JOURNAL seems to be well upward until the upgrade took place though. I found at least half a dozen KB articles that describe the various reasons why this error may occur, but they all relate to older versions of vCenter. Just to be complete, although I saw the symptoms in the articles and none of them really seem to be the same as what I see. My hypothesis is that perhaps the SMS did not get properly re-installed upgrading because I don't see any SMS subdirectory in the directory \Program Files\VMware\Infrastructure\tomcat\webapps but I do not know if this directory must exist on a 5.5 installation.

  If you would be grateful if anyone has any advice for troubleshooting for this type of error.

  Thank you

  Mike

  Change the credentials of the service account for VMware vSphere Profile-Driven Storage Service to those used to start the VMware vCenter Server service and the service of VMware VirtualCenter Management Webservices. By default, the account used Local System.

  Restart the service, the change was made, and then check.

• Windows Defender does not open on my computer. Get the error. '0 x 800700006 initialization failed. The handle is invalid. "How can I fix it?

  My computer has been infected by the virus Happili and I would like to run Windows Defender to drink, that it does not open. I get the above error message. How can I trouble Defender or get rid of the virus. No scanning seems to be virus.

  Hello

  Read the information that you do not say what Antivirus you use, which can also be the cause of the problem with Windows defender.

  And also the scan with Malwarebytes AntiMalware; link to information and download here:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually activate new Windows (do not take into account information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Satellite L750, webcam integrated - application - initialization failed

  I recently got a new Satellite L750 laptop with built in webcam as a gift by my parents, who live in the United Kingdom, so I can stay in touch with them to the Ireland. We had hoped to call each other via video calls, but I can't get the webcam in the laptop for work. I click on camera app Web displays a message saying "Web Camera Application initialization failed; Restart the computer or web camera. »

  I have tried to download the driver from the web camera on the toshiba site and have updated the BIOS, but it made no difference.

  What can I do to get it working?

  I assume that you want to use Skype or some other messenger, right?
  For this application, you must not start application pre-installed Webcam. You can even disable the start-up.

  Can you please check if cam is recognized and listed correctly in the Device Manager and check if some messenger recognizes cam.

  Please post comments and we can continue this discussion.

• Windows vista home premium displayed "startup initialization failed" recovery/repair could not fix

  Gateway Laptop preloaded vista home premium displayed "startup initialization failed" launched the recovery/repair utility and was not able to repair.  now when you start the computer it will launch recover through process then the screen from windows with dots streaming on bottom is gets.   matter of fact that the screen is still and only way to stop it is to unplug the power.  a recommendations there...?  friends computer so HELP!

  E-mail address is removed from the privacy *.

  Hello

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And see if the hard drive tools help you.

  "7 free disk hard test Programs.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  See you soon.

• shock wave. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder

  Shockwave for Director 12.1.1.151 does not start, just with that. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder. Reinstalled but made no difference. If you can help would be grateful. Thank you.

  I restored my computer to an earlier version, installed latest version of firefox and the Shockwave for Director, everything is fine now. Thanks for your help guigs2.

• Satellite C650-1CR - webcam initialization failed

  Hi all

  I can't have the built-in webcam to start.
  I downloaded and installed the latest version of bios and drivers webcam on toshiba website which invited cam to start to initialize.

  Now I have an error that says 'webcam initialization failed, please check your device... ". »

  The problem is that there is no registration for the webcam on the screen of the Device Manager.
  I am at a loss how do I get the webcam to work, any suggestions?

  Billy

  > The problem is that there is no registration for the webcam on the screen of the Device Manager.
  Usually the webcam must be listed in the device under imaging devices Manager
  In my case it USB video peripheral s it is the Chicony usb webcam.

  You have marked unknown devices with yellow exclamation?
  If Yes, then this is probably the cam

  As a last option, you can try to recover the laptop using the Toshiba Recovery disk that you have created... If all goes well...

• Engine initialization failed

  I'm under explore 7 and every so often when opeing a third or fourth screen I get an error message in menu bar 'engine initialization failed' page I'm on and then flashes and it is difficult to navigate the page. Any ideas on how to fix this

  What version of Internet Explorer you are using? Is this the last an IE9?
  If this isn't the case, update IE to the latest version available.

• Satellite Pro 490 CDT: THE BSOD VFAT DEVICE INITIALIZATION FAILED

  Hello...

  . Heres a beauty for you... I hope someone can help... here go us.

  Loan of laptop to grandson... came back... lots of files were missing.
  Managed to get the BIOS with ESC and F1... and got m/c start CD player. with W98 drive in

  ScanDisk fixed a lot, a lot of probs... then to start to reinstall W98.

  Stupid me thought that I wonder if he will now start without having to reinstall windows.

  Turned on / turned off... now I'm stuck.

  Immediately get the bluescreen...

  * VFAT DEVICE INITIALIZATION FAILED.*

  * A DEVICE OR RESOURCE REQD. BY VFAT IS NOT PRESENT OR IS NOT AVAILABLE. VFAT CANNOT CONTINUE TO LOADING.*

  * HALTED.* SYSTEM

  Computer portable primer not cd player where the BIOS has been the last value.
  Can I not access the Bios with ESC and F1 like last time.
  It doesn't matter what I do... I can't get this screen or boot in the bios.

  I hear the cd drive spin upward with the W98 CD in but still the same blue screen of death with the message above.
  If I can't go beyond that message or access the bios... what should I do please? /

  How can I get past this screen and reinstall windows

  I hope you can help...

  Thank you

  Hello

  The fact is that you have laptop for 10 years and I really wonder if anyone here has any experience with this good old classic.
  If you are unable to enter BIOS, the situation is quite serious. You may have Floppy drive for this laptop?

• Satellite L300 - T2FTP Windows sockets of initialization failed

  After login, I get the following message:

  T2FTP Windows sockets of initialization failed

  At the same time, the system issues a message that he has found a new unknown device and the driver must be installed.

  Before that I did NOT add a new hardware device.

  Click the button start only generates a message: Windows Explorer does not react.
  It is impossible to call any other routine.

  Unfortunately I can not find my recovery CDROM.

  Are there opportunities to save my system?

  Toshiba Satellite L300 model PSLB8E
  Windows VISTA-32 bit

  Hello

  I never met such a problem. Have you installed any programs recently? It seems that the software related issue. To be honest, it is sometimes easier to reinstall the operating system than to try to fix it.

• Satellite L350-264: webcam initialization failed

  I just bought a new L350-264 (PSLD4E).
  Built in web cam worked fine for a few days but now when I turn the laptop on an error says "the Web camera initialization failed.
  Please check your device and restart the application or computer.

  No other information is provided.
  I restarted the laptop and tried to open the camera menu utilities Toshiba, but the same error is returned.

  Can anyone help?

  Hello

  What do you think of born of the webcam software installation?
  Read about the error messages similar here and especially the user could resolve this reinstall the webcam software.

  The software can be downloaded from the European pilot of Toshiba page!

• Satellite L350 - Webcam initialization failed

  I'm new here so not sure if I'm posting in the right place.

  I have a Toshiba Satellite L350 (Windows 7) that I bought in January. Everything was fine until the last two weeks when my webcam suddenly stopped working and when I sign in Dungeon getting a webcam of the message initialization failed, please check your device and restart the computer or the camera.

  I went to settings and it says camera works, but it is not. I also have another pop up when I sign saying check Toshiba laptop stopped working (not sure what it is)

  Can anyone help please?

  Thank you
  Jan

  Hi Jan,

  I had the same question as my webcam didn't work and so I reinstalled the driver for the webcam that could solve my problem. You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But I recommend to remove the old version first. Then use CCleaner to clean the registry and then you can install the latest version on the Toshiba site.

  Toshiba laptop recording you can remove from Control Panel > Add/Remove programs.

  Check this box!

• Satellite L500-1DT: cannot start webcam - 'initialization failed '.

  Whenever I try to open my webcam it comes up with the message "initialization failed" and no other information.
  Does anyone know how to fix this?

  I'm not completely computer so simple instructions please!

  [Thanks:]

  Hello

  First remove the software from the webcam installed in the system.
  Then, visit the page of European driver of Toshiba and download software webcam for your laptop model.
  Unzip the package, and then reinstall the webcam software.

  Then restart the laptop and try again!

• Satellite L650 - camera initialization failed Web

  Hello

  I have a Satellite L650. I got it for a little less than 6 months and the other day, I turned on the computer to find the webcam pop up message saying "Web camera initialization failed etc... "I have also noticed that the microphone in too no longer works.

  I uninstalled it and re installed the driver, and it still does not.

  I was wondering if there is anyone who can help or has had the same problem?

  See you soon,.
  Dylan.

  Hi Dylan,.

  You can use the internal webcam with other applications like Skype?
  Have you installed the correct Satellite L650 webcam driver?
  What operating system you are using?

  If you have already reinstalled the driver for the webcam I advise to use CCleaner tool. It is a very nice freeware tool that can check your registry for the old registry keys and delete. If this cleaning software nice s to improve performance a bit and solve problems. Just use Google to find this program.

  Check this box!