Satellite L750, webcam integrated - application - initialization failed

Similar Questions

• Satellite C855: webcam not found - initialization failed

  * Hello.
  I have a Toshiba Satellite C855 and I had a problem because I spent in windows 7 64 bit (I was on 32 bits), the problem is that I can't find the webcam.and when I run the "Toshiba Web Camera Application" application in the device driver it displays this message:

  + the failure of the initialization of the webcam. Check the operation of the camera, and then restart the application or restart the computer. +

  I don't know what to do I just try to update the driver on the official website of Toshiba, also uninstalation instalation and all... nothing worked.

  Please help me.
  and I thank you in advance.

  Post edited by: soubou

  Is the webcam or any device marked with visible yellow exclamation point in Device Manager?

  Otherwise, the webcam module is defective and must be replaced.

• Satellite L750 - Webcam is not working running Windows 10

  Hello

  I have a few driver issues after the update of windows 10 with my laptop Satellite L750.
  Toshiba webcam does not work and I had to disabled the Bluetooth because the error "driver_irql_not_less_or_equal btfilter.sys".

  So I need the latest drivers for these two devices which works very well with windows 10 please.

  Please update these two devices Toshiba: Toshiba Web Camera Application and Bluetooth Stack for Windows by Toshiba to work correctly with windows 10.

• How to start on Satellite L750 webcam?

  HELLO EVERYONE.

  HAVE JUST GOT A SATELLITE LAPTOP L750-1E5.

  EVERYTHING IS FINE BUT A QUESTION...
  GET THE WEBCAM TO START, HOW CAN I DO THIS? I CAN ONLY GET IT TO THE TOP WITH THE HELP OF THE MENU START. ON MY PRO SAT HER ON THE SIDE OF MY DESKTOP SCREEN. ANY HELP ON THAT WOULD BE GREAT. PLEASE BE AWARE THAT I'M NOT TOO GOOD AT THIS COMPUTER STUFF!
  THANKS IN ADVANCE.

  Start webcam application using the start menu.
  Then when the application appears when you place the mouse pointer it click with the right button of the mouse and choose the option Auto Run. After ding this Webcam application always starts with Windows and you must not start also.

• Re: Satellite L870-124 web camera initialization failed

  When we arrived first of all our laptop, we have managed to find the web camera. We used it, but now I'd like to try Skype. The web camera is not found.
  On the start menu, it appears under "all programs" Toshiba"'media and entertainment'"web camera application. When you try to use it, we get a message saying that he was unable to initialize.

  I tried to download the drivers to go [here | http://www.toshiba.co.uk/innovation/download_driver_details.jsp?service=UK&selCategory = 2 & selFamily = 3 & selSeries = 180 & selProduct = 7478 & selSh ortMod = 3399 & language = 13 & selOS = 30 & selType = 315 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = 8 & selectedLanguage = 13 & type = 315 & page = 1 & ID = 81921 & DISO = 30 & driverLanguage = 42] still but I got the same message.

  I tried to read forum entries that seem to be similar problems, but I do not understand some of the answers. Can someone advise me in plain English, please. ?

  Hello

  What webcam status appears in the Device Manager?
  The webcam feature is marked with a yellow exclamation point or it does not appear in Device Manager?

  As far as I know, the webcam can be enabled and disabled in the BIOS.
  So would recommend checking the status of the webcam in the BIOS too.
  Press F2 to enter the BIOS (when starting) go to advanced-> Control Panel settings
  You should see the webcam enable / disable option

• Satellite L870-124 web camera initialization failed.

  When we arrived first of all our laptop, we have managed to find the web camera. We used it, but now I'd like to try Skype. The web camera is not found. On the start menu, it appears under "all programs" Toshiba"'media and entertainment'"web camera application. When you try to use it, we get a message saying that he was unable to initialize.

  I tried to download the drivers from here but always got the same message.

  My husband has managed to find the webcam in the BIOS by pressing F2 when the computer has just been turned on. It has been shown as active, so it isn't that.

  I looked at how to find the Device Manager and have now found in the control panel under system and security. There is nothing here that looks like a web camera, not even by pressing the view and looking in hidden devices

  I tried to read forum entries that seem to be similar problems, but I do not understand some of the answers.

  I tried pressing FN and F9, Mine isn't a small sign of the camera. That didn't seem to do anything.

  Can someone advise me in plain English, please. ?

  Hi Joanmiller,

  Thanks for posting your query in Microsoft Community.

  From your problem description, I understand that you cannot open the web camera, a message saying: could not initialize.

  I imagine the inconvenience that you are experiencing. I would like to see what more I can do to help our end.

  Follow these methods and see if that fixes the problem.

  Check if the webcam is listed under imaging devices.

  Method 1: run the hardware and devices troubleshooter. Refer to this link:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Try to use Windows Live Messenger and check if you can access the webcam.

  Refer to this link: using a webcam

  http://Windows.Microsoft.com/en-in/Windows7/using-webcam

  Method 3: Refer to the suggestions from this link:

  How can I fix my webcam?

  http://forums.Toshiba.com/T5/video-display-Knowledge-Base/How-can-I-fix-my-webcam/Ta-p/281393

  System Restore Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps. If the problem persists, or if you have questions related to Windows please get back to us. We are happy to help you.

• Satellite P100: "infrared remote hardware initialization failed.

  "Failed to initialize the IR remote device", why I get this message at startup? This model is not equipped with a remote control.

  Hello

  Can you please better explain when this message occurs?
  Your device's pre-installed with recovery media?

  I think that some units are supplied with the remote control, but I also believe that all P100 units have the same recovery image and separate images of Toshiba doesn t for units with or without remote control.

• Satellite C660 - webcam integrated not on focus

  I have a webcam built-in in my Toshiba c660d and all trying to use it, it is not the focus.
  The update cannot be together (deactivated) in the settings of the software or in the video settings of Skype.
  I installed the most recent driver.

  How can I focus it?

  I m not very well if I understand your question.
  The zoom option is available in the software of the webcam but it s disabled? Right?
  In this case, I recommend uninstalling the webcam software and this completely withdraw from the system. Then, you must clean the operating system using the Ccleaner.
  After that, restart the device several times and install the webcam software.

  But I have another series of laptop Toshiba, and in my case, the Zoom is not available as a webcam feature.

• Re: Most of the time by Satellite T110 webcam fails to initialize

  It happens most of the time you.
  The webcam of my T110 fails to initialize and a message appears saying that webcam could not initialize, please check the device and restart the program (Web camera application) or the computer!

  Other times, it works, but after a pop up appears on the bar by saying that an unsupported USB device has been detected and could not be installed tasks!

  It is boring! Can someone help me please?

  Thank you.
  Manuel Quinaz

  Hello

  Seems that the software of webcam has stopped working.
  I think that you should first try to reinstall this software.

  First remove the software of the webcam of the system.
  Then clean the system and the registry using CCleaner!
  Reboot the laptop twice and run CCleaner several times to make sure that everything has been properly cleaned.
  Download the software of the webcam from the European driver Toshiba page, and then install it.
  Restart the unit. Launch msconfig (in RUN type msconfig) and go to the Startup tab.
  There, you must deselect landmark from the webcam software. This prevents the automatic start software. Restart the unit.

  Now, if you do want to use the webcam, select all programs-> Toshiba-> webcam software and start it.

• Satellite L350-264: webcam initialization failed

  I just bought a new L350-264 (PSLD4E).
  Built in web cam worked fine for a few days but now when I turn the laptop on an error says "the Web camera initialization failed.
  Please check your device and restart the application or computer.

  No other information is provided.
  I restarted the laptop and tried to open the camera menu utilities Toshiba, but the same error is returned.

  Can anyone help?

  Hello

  What do you think of born of the webcam software installation?
  Read about the error messages similar here and especially the user could resolve this reinstall the webcam software.

  The software can be downloaded from the European pilot of Toshiba page!

• Satellite L350 - Webcam initialization failed

  I'm new here so not sure if I'm posting in the right place.

  I have a Toshiba Satellite L350 (Windows 7) that I bought in January. Everything was fine until the last two weeks when my webcam suddenly stopped working and when I sign in Dungeon getting a webcam of the message initialization failed, please check your device and restart the computer or the camera.

  I went to settings and it says camera works, but it is not. I also have another pop up when I sign saying check Toshiba laptop stopped working (not sure what it is)

  Can anyone help please?

  Thank you
  Jan

  Hi Jan,

  I had the same question as my webcam didn't work and so I reinstalled the driver for the webcam that could solve my problem. You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But I recommend to remove the old version first. Then use CCleaner to clean the registry and then you can install the latest version on the Toshiba site.

  Toshiba laptop recording you can remove from Control Panel > Add/Remove programs.

  Check this box!

• Satellite C650-1CR - webcam initialization failed

  Hi all

  I can't have the built-in webcam to start.
  I downloaded and installed the latest version of bios and drivers webcam on toshiba website which invited cam to start to initialize.

  Now I have an error that says 'webcam initialization failed, please check your device... ". »

  The problem is that there is no registration for the webcam on the screen of the Device Manager.
  I am at a loss how do I get the webcam to work, any suggestions?

  Billy

  > The problem is that there is no registration for the webcam on the screen of the Device Manager.
  Usually the webcam must be listed in the device under imaging devices Manager
  In my case it USB video peripheral s it is the Chicony usb webcam.

  You have marked unknown devices with yellow exclamation?
  If Yes, then this is probably the cam

  As a last option, you can try to recover the laptop using the Toshiba Recovery disk that you have created... If all goes well...

• Satellite L500-1DT: cannot start webcam - 'initialization failed '.

  Whenever I try to open my webcam it comes up with the message "initialization failed" and no other information.
  Does anyone know how to fix this?

  I'm not completely computer so simple instructions please!

  [Thanks:]

  Hello

  First remove the software from the webcam installed in the system.
  Then, visit the page of European driver of Toshiba and download software webcam for your laptop model.
  Unzip the package, and then reinstall the webcam software.

  Then restart the laptop and try again!

• Satellite L650 - camera initialization failed Web

  Hello

  I have a Satellite L650. I got it for a little less than 6 months and the other day, I turned on the computer to find the webcam pop up message saying "Web camera initialization failed etc... "I have also noticed that the microphone in too no longer works.

  I uninstalled it and re installed the driver, and it still does not.

  I was wondering if there is anyone who can help or has had the same problem?

  See you soon,.
  Dylan.

  Hi Dylan,.

  You can use the internal webcam with other applications like Skype?
  Have you installed the correct Satellite L650 webcam driver?
  What operating system you are using?

  If you have already reinstalled the driver for the webcam I advise to use CCleaner tool. It is a very nice freeware tool that can check your registry for the old registry keys and delete. If this cleaning software nice s to improve performance a bit and solve problems. Just use Google to find this program.

  Check this box!

• shock wave. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder

  Shockwave for Director 12.1.1.151 does not start, just with that. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder. Reinstalled but made no difference. If you can help would be grateful. Thank you.

  I restored my computer to an earlier version, installed latest version of firefox and the Shockwave for Director, everything is fine now. Thanks for your help guigs2.