Prompt dialog box appears only not on BBOS 10, work on OS2.1

Similar Questions

• Open dialog box appears only not all files

  I just bought a new iMac (Yosemite 10.10.5 running version) and I have a problem with Illustrator (race 2015.1.0) when I try to 'open' or 'save' a document all my files in any folder are not displayed.  No matter how big or small the dialog box is that all files are more fit in this box.  It's a little hard to explain so I enclose a photo.  There are dozens of additional files that should be showing in this area.  On the right side of the box, you can see how file names are cut off.  There is more to the right of that.  I'm not able to reproduce the problem in photoshop or any other program on my computer so I figure it's a framework or a problem in illustrator.  Anyone can shed some light on this?

  I do not wish to use the column view that I need preview buttons.

  

  ammyzan,

  If you use the column view, run away until Apple has resolved the issues.

  I think that the good order/way is to update the operating system, and then reinstall the applications. Which was how you did it?

  If this isn't the case, it may be best to reinstall using the way complete three steps (the otherwise strange things may persist):

  (1) uninstall (check the box to delete the preferences),

  (2) run the cleanup tool, see the link below,

  (3) reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Cannot open Illustrator CC. Dialog box appears with "Adobe illustrator has stopped working. Please activate the Verdana fonts and restart the illustrator application.

  Tried all the usual stuff:

  1. Uninstall/install

  2 uninstalled Suitcase Fusion (trial version)

  System: OS x Version 10.9.2

  Any ideas how to solve this problem. Any suggestions welcome and appreciated.

  shonski,

  Just to make sure, are all the faces of fonts Verdana and Tahoma installed and activated/enabled through the BONE (no fonts mangement) as TTF (not OTF)?

  If this isn't the case, that is needed.

  If they are, you face a rather strange problem. Unfortunately, it's been a while since our friends of forum staff have been published. Outside the research or was waiting for them, try customer,

  http://helpx.Adobe.com/contact.html

  or Support from Adobe (phone),

  http://helpx.Adobe.com/Adobe-Connect/Adobe-Connect-phone-numbers.html

• MS Photo Gallery, how can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?

  How can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?

  The dialog box that appears frequently when I try to convert or download photos, shows the shadow of this question - I want to make it active until the times dialog box stops appearing I scroll the photo folders.

  Thank you

  I got the last part of what you wanted, which was simply not the message

  The key is that you have to allow this program through your windows firewall.

  Go to your look for the windows Firewall Control Panel,

  There should be a list to allow a program through windows firewall, look at the top left.

  If you feel safe doing this, vlc is not one that I would feel safe with, but to you, it has a function to browse to find the program to be added to your trusted list or access through your firewall.

  Still, it may give you a warning but could release the message?

• can someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of violeted files

  Ideas:

  • Programs you arecan someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of files violeted the problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  bastyav,
  We use the exact and some error message in more detail on the issue.  This problem occurs with any file on the disk or only some of them?  You are logged as administrator?  Has anything changed recently (hardware or software)?

  The first thing I would say to run a Virus scan and malware.  If you do not have an antivirus program, then you can get one here: http://www.microsoft.com/Security_essentials/

  If there are no problems found then not try the following steps:
  Run the following commands.

  Chkdsk /r

  http://support.Microsoft.com/kb/315265

  sfc/scannow

  http://support.Microsoft.com/kb/310747

  Let us know the results and the information requested.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Save dialog box under does not display the list of files

  Terminal Server R2 of 2012.  Dialog box "Save as" for a user does not display the list of files.  The address bar shows the way, there is a form for the file name box, and the user can save the file successfully.  But the space that would show the files in the selected directory is empty.  There is no form for the list of files box, it's just the grey box dialog box space - that is to say, it is not that it looks like an empty folder, there is simply no display form box.

  The 'Open' dialog box appears normal, showing the list of files in the selected folder.

  I had the user close the session on the Terminal Server and access it from another PC, even if I was not expecting to make a difference, and it didn't.  I have also connected on myself and has not experienced the same problem.  So it seems to be user-specific.

  What a setting, the user has selected by mistake, or a mistake any?

  Thanks for any help.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• A button dialog box appears intermittently

  Has anyone encountered any instance where they ran of code that contains a call to a Dialog.vi button and didn't do not display dialog box?

  I write the code at present which is to launch a "Sample Communication Controller.lvclass" player. I tried to make calls for dialogue in instances overridden "Pre launch Init.vi" and "Core.vi actor". In both cases, whenever I run the actor often the dialog box does not appear. The code below illustrates my second attempt, when I tried to put the call on "Example of Communication Controller.lvclass:Actor Core.vi" (not done as an extract VI because the extract VI feature is buggy).

  

  I rolled my own logging system and use I think 'Example Communication controller begins!' is recorded systematically whenever the player is launched, if yes or no dialog box appears.

  Flat sequence structure is temporary and just an attempt to see if the data dependencies change has an effect.

  Just a long shot, but the dialog box button requires root loop. If something else is hogging the loop of the root, I could see what is happening, although I expect the code to hang.

  A simple test would be to replace the dialog box a button with a dialog of three buttons (see link for details).

• Failed to open all files with the extension .exe in Vista Business SP2. Dialog box appears and asks which program to use. Seems to have lost the info file assoc after virus removal.

  Failed to open all files with the extension .exe in Vista Business SP2.  Dialog box appears and asks which program to use.  Seems to have lost the info file assoc after virus removal.  Any suggestions?

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  Try the fix it or follow the manual for troubleshooting to solve the problem.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Note:

  The link above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Method 2:

  Download and run Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• As I try to start my computor, any dialog box appears on the screen are covered in "'

  As I try to launch my putor, any dialog box appears on the screen are covered in "' so I can't put passwords or addresses of sites and if the sound is on a morse codes like noise appears with the comma... I have done all the analysis and attach it to Microsoft but do I have a virus and how do I find? thxs

  .. .all dialog box appears on screen is covered in "' so I can't put passwords or addresses of sites and if the sound is on a morse codes like noise appears with the comma...

  The character you are evidence is a single quotation mark or tick rather than a comma, but the character you see in reality is probably an asterisk in a mask the password text box. In both cases, the problem remains the same.

  You have a key stuck on your keyboard which instantly fills any box entry with the typed characters, they are ticks or asterisks. The only audible ringer is a normal computer error indicating that the keyboard buffer is full, but entry continues, once again an indication of a stuck keyboard key.

  Try another keyboard. It may be possible to launch a key by a sharp tap, but the problem will probably persist in the future. I hope that you don't talk about your laptop.

• whenever I start my windows, the dialog box appears with the words "persistence module a work stoppage" how to fix this problem?

  whenever I start my windows, the dialog box appears with the words "persistence module a work stoppage" how to fix this problem? someone help me please tell how to fix

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest you to try the steps below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• New dialog box rule CSS not listed do not

  I use the Mac version of the program. Whenever I try to access the dialog box displayed new CSS rule, it never works. I think I can be absent a toolbar or something, because I searched the whole program for this feature and I can't find it. I've seen users highlight text and it appears, but it does not work for me either. I am trying to add a new class with a new selector name. help me find the box?

  CC comes with the new CSS Designer Panel.

  What do you use?

  http://www.Adobe.com/inspire/2013/06/CSS-designer.html

  http://TV.Adobe.com/watch/creative-cloud-for-Web/CSS-designer-indepth/

• Dialog boxes appear off the screen

  Hello, I have problems with dialog boxes in Illustrator CS6.

  Dialog boxes are appearing in various different locations rather than a central location on the screen...

  For example: the Save dialog box appears half off the screen towards the lower right section of the screen. Various other boxes appear at the top left, top right. All dialogs are mobile, so I can reposition in the Middle, but the next time I used appear where they were not at the Center.

  I work on both a 13 "macook pro separately and with and 27" apple screen attached. Dialog boxes are visiable on 27 "screen, but often in odd places.

  Is there a way I can reset their position?

  I tried reseting all the dialogues, trashed the preferences in the preferences in the folder of the library on the computer but no luck. I'm puzzled.

  Any help would be appreciated...

  Thank you

  nosbornf,

  It is important that Illy is closed when you reset the preferences.

  Try the following (you may have tried / some of them already) and see if it helps:

  (1) close Illy and open again.

  (2) restart the computer;

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift at startup.

  4) move the folder with Illy closed;

  (5) browse and try the relevant among other options;

  Even worse, you can (if all else fails and no best answer appears):

  (6) uninstall, run the cleanup tool and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• My panels are not displayed when I click on it in the menu drop-down windows. The box appears but not the Panel. Can anyone help?

  My panels are not displayed when I click on it in the menu drop-down windows. The box appears but not the Panel. Can anyone help?

  Try to reset your preferences using Cmd (LTRC) - Opt (Alt) - move when restart you the version of AI. Did you once two monitors?

• When to wake up the virtual machine of the suspension of the next dialog box appears?

  Hello and thank you...

  I use VM Fusion 4.1.3 on a MacBook Pro mid-2009 with the Mountain Lion. Since I installed VM Fusion 4, the following dialog box appears whenever I wake the machine of suspension. I click ok and everything works fine. I would like to pass it if possible and I must emphasize that everything works perfectly after I get back okay. Any help would be appreciated.

  Thanks in advance and I have attached a screenshot

  Well, you could do as suggested in the message!

  Or add the following line to the .vmx config file.

  buslogic.nodriver = "FALSE"
  

  Take a look on: modifying the .vmx for your merge file< virtual="" machine="">

• When I try to open the file with Chinese or Japanese script, a dialog box appears in a black screen

  When I click on the PDF file, a dialog box appears with the text Chinese or Japanese on a black screen

  fornarina75,

  Try this:

  1 Quit Safari.

  2 start the player from the /Applications/ folder and accept the end user license

  3. load the PDF in Safari.

  Thank you.