Similar Questions

• New EarPods works do not correctly with the old iPhone

  Hi, someone I gifted their EarPods. I tried on my iPhone 4S running on iOS 7.0.4 but to my disappointment only left side is audible to all the sound elements of music to Siri. right side is silent, not even low noise at full volume. All other functions of the EarPods as 'change volume' and mike work correctly. But then I tried on my computer laptop Lenovoand they absolutely worked well! The two sides were also audible and clear. I tried again on my iPhone 4s, but the problem occurred again! Other headphones work fine with this iPhone. Now, I know that neither EarPods jack iPhone is damaged (or blocked), it isn't a software problem and also compatible with the iPhone 4S as claimed by Apple. I have now run out of options. Please help me. Thanks in advance. (I live in India, where there is no Apple store, so please don't recommend me to get replace them)

  If you don't insert them completely what you describe happen

  could be a cause of why it is not able to go all way

  1. you did not apply enough pressure

  2. something got into the connector and cause the connector not being able to go all the way in

  all headsets with headphones apple 3.5 mm minijack or otherwise, have always been able to work with any device I connected their ios device or laptop or the likes.

• Questionnaire works do not correctly with the presenter 7.0.7 in LMS

  I use PowerPoint 2003 and presenter version 7.0.7. We previously had version 7.0.1 and quiz worked very well. However, I reissued a course with 7.0.7 and when downloaded on our LMS quiz does not work correctly if a user fails the quiz. Works fine the first time, but not if they fail and must go back.

  The course takes the user initially (as we wanted), but when they get to the quiz to resume it, they pick the correct answer, click on submit and nothing happens. A message should display the so-called "Correct" or "Incorrect" and click to go to the next slide. These messages are not displayed and the user cannot move to the next slide by clicking anywhere (which they should).

  It seems that, behind the scenes, that he might work because if I use the button forward/next down through all the questions after I answer them correctly, it will record that I have completed and passed the quiz.

  I ended up uninstalling 7.0.7 and going back to 7.0.1 and it worked fine. However, I would like to know if there is a solution to this problem so that we can use 7.0.7.

  Thank you.

  7.0.1 is a version quite buggy of the presenter. Have you tried to go to version 7.0.5 or 7.0.6 through the Adobe update 7.0.2? If identified when in the process of updating, there was a change which affected the reports feature to your LMS, which can help identify the problem. Personally, I recommend that you don't touch same presenter, unless it's on version 7.0.5 or later, because it it too great a risk to not do what you expect or just crashing and losing all your work.

  Also, if you access the training in IE9? I remember he had some compatibility issues with IE 9 and presenter, but I thought that was resolved in 7.0.7.

• Photoshop works do not correctly with the graphics card.

  When I start the PS, he gave me messages while ensuring that I have updated graphics card drivers, what I'm doing. If I enable Open Gl drawing in Photoshop it does not open some documents or fails. If I disable the Open GL drawing, it opens the documents, but obviously is not giving me the display performance that I need. I've been running this setup for about 6 months, but only started having problems this week. I am running Photoshop CS4 and a nvidia GTX 295.

  Do not appear to have catastrophic graphics card problems (touch wood), I can always run Crysis!

  Can someone help me please?
  

  Are - what you happened to download the faulty Nvidia driver package which was listed so removed from the site? This package is defective and caused the Nvidia GPU down and turn into bricks. You wrote that you have just started to have problems, then maybe that's your problem. I would use an old driver until Nvidia it sorts.

• / CD player works do not correctly with the door of Baldur

  I was playing a game of RPG of older CD called Baldur Gate, I never had any problem, my laptop is out of battery to reboot it back, goes to the game for a split second, then freezes, I've run a startup repair, which froze, I removed the disc, then it starts very well. I put the disc in, go play you and get a blue screen dark, as if the game started but could not. using the Task Manager, I unlock the mobile. Then I got the cd, put it in my other computer, and it plays very well. whenever I put this drive it freezes if I try to expore or play the disc. Help?

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• Documentation about adding column with the DEFAULT value.

  Hello
  
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_3001.htm#i2198241
  
  < quote >
  If you add a column, then the initial value of each row in the new column is NULL unless you specify the DEFAULT clause. In this case, Oracle database updates each row in the new column with the value specified for the DEFAULT value. This update operation, in turn, triggers AFTER UPDATE triggers defined on the table.
  < quote >
  
  I am not able to understand the emphasis on the part AFTER UPDATE while the column with DEFAULT values addition triggers both BEFORE and AFTER triggers defined on UPDATE.
  
  According to the documents of 11 g
  
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28286/statements_3001.htm#i2133105
  
  n.m. (u) r only changes with the NON NULL columns, but focus on AFTER UPDATE is still there. No trigger defined on the fire of the update in this case.
  
  This insistence is intended? If not, IMO, it should be changed.
  
  Kind regards

  Hi Sissi. After further discussion, we have added some information about a change in behavior. Here is what says the next version of the doc:

  When you add a column, the initial value of each row in the new column is null.

  * If you specify the DEFAULT clause for a column NOT NULL, then the default value is stored as metadata, but the column itself is not populated with data. However, the following queries that specify the new column are rewritten so that the default value is returned in the result set.

  This optimized behavior differs from earlier versions, when as part of operation ALTER TABLE Oracle database updated every line in the newly created with the default column and then fired defined update triggers on the table. In this release, no trigger is triggered because the default value is stored only in the form of metadata.

  * If you specify the DEFAULT for a nullable column clause, then the default value is added to existing lines under this ALTER TABLE statement, and any update triggers defined on the table are activated. This behavior also means if you change a NOT NULL column with a default value to be nullable.

  Hope that helps to clarify the matter further.

  Kind regards
  Diana

• WARNING: [39028] "DAC" database functions do not correspond to the default values.

  Hi guys
  
  I get after warning while I try to check the consistency of my deposit.
  
  [39028] "DAC" database functions do not correspond to the default values. This can cause problems of application.
  
  How can I get rid of this error?
  
  Thank you
  Saurabh

  Hello

  Double-click the field not in the connection pool you can click tab features

• Why firefox can not open with the default profile. It should be renamed?

  trying to install "malwarebytes" for extra protection, the Norton toolbar on firefox has been reduced in size by losing my option "Vault". This prompted reinstalling on securities Notion which then prevented the opening of firefox. Internet Explore works well but I use firefox for years so why change. Firefox won't open (even after being uninstalled and downloaded and reinstalled. The message 'your firefox profile cannot be loaded, etc.' following the instructions of your forum, I locate a profile with the word 'profile' embedded file. The word "profile" in the flow path is preceded by a weird name (such as a foreign name). Path =
  'C:\Users\Owner\AppData\Roaming\Mozilla\Firefox\Profiles\bzjajhor.default-1419035389504 '. This file needs to be renamed and can they?

  Please help me to go back to firefox. Thank you

  Do not rename a profile folder.
  It seems that there is a problem with the profiles.ini.

  See:

  • https://support.Mozilla.org/KB/how-run-Firefox-when-your-profile-missing-or-inacc

  This is usually caused by a problem with the file profiles.ini and the profile marked as the default value = 1 in this file is no longer present on the hard drive.

  • Windows: %AppData%\Mozilla\Firefox\
    C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • Linux: ~/.mozilla/firefox/
  • Mac: ~/Library/Application Support/Firefox /.

  You can use one of them to make Firefox/reuse to create a new default profile:

  • Remove the profiles.ini file to force Firefox to create a new default profile
  • Use the Profile Manager to create a new profile
    Use "Choose a folder" when you create a new profile to select the location of a lost profile and recover this profile
  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Pump diagram remapping of data with the default value of sequence (12 c feature)

  Hello

  in the 12 c Oracle database there is a new feature that allows you to set default values directly from a sequence:

  http://docs.Oracle.com/database/121/NEWFT/chapter12101.htm#NEWFT155

  This helps us to save the use of triggers to get the next value of an ID column for example the DDL of such a table might look something like this:

  CREATE TABLE "FOO"."MY_TABLE" ("ID" NUMBER(10,0) DEFAULT "FOO"."MY_TABLE_ID"."NEXTVAL", ...   );

  During the pattern FOO with Data Pump export and import the schema with the remap_schema option in the BAR diagram for example, mapping works fine for all the tables, triggers, etc. except those defaults (as Oracle always writes the schema information in these default values).

  The error in the output log that says 'FOO. MY_TABLE_ID"sequence is unknown, because the sequence is now called 'BAR. MY_TABLE_ID' - mapping so does not work for default values.

  Someone knows how to fix this?

  Thanks in advance

  Concerning

  Hello

  Read this note, I think that it is an expected behavior:

  http://docs.Oracle.com/CD/E11882_01/server.112/e22490/dp_import.htm#SUTIL927

  REMAP_SCHEMA

  .

  Restrictions

  * The mapping cannot be 100 percent complete because there are some references to diagrams that importing is not able to find. For example, import will not find of references to patterns incorporated into the body of the definitions of triggers, types, views, procedures and packages.  -I think in your case it is the default value.

  * If any table in the schema are remapped contains object types defined by the user and this table changes between the time wherever it is exported and the time you are trying to import, and then import this table will fail. However, the import operation will continue.

  HTH,

  Pradeep

• problem with the default value of the parameter in function

  Hi all

  create or replace FUNCTION date_post_message (
  user_lock_in  IN  users.user_lock%TYPE,
  form_type_in  IN users.form_type%TYPE DEFAULT 0 ,
  date_in       IN                       DATE)
  RETURN BOOLEAN
  IS
  v_num number(1);
  BEGIN
  IF user_lock_in = 1 THEN
     RETURN FALSE;
  END IF;
  IF form_type_in NOT IN (1,2) THEN
     RETURN FALSE;
  END IF;
    SELECT 1
    INTO v_num
    FROM changes
    WHERE date_post_msg <= date_in ;
    RETURN TRUE;
  exception
  WHEN NO_DATA_FOUND THEN
  RETURN FALSE;
  END date_to_post_msg;

  problem: there is null, the function ignore the form_type_in default value 0.
  Why? the default value is valid only in the parameter of the procedure?
  Thanks to Advnaced
  Naama

  Naama wrote:
  If a value is null to convert it to 0? I mean in the part of the statement of the parameter

  No, can't do this in the signature. You will need to manage this by validating the parameters passed at the beginning of the function.

  It is quite simple. In your case, you might as well test for NULL and fail to function like this:

      FUNCTION date_post_message(
              user_lock_in IN NUMBER,
              form_type_in IN NUMBER DEFAULT 0 ,
              date_in      IN DATE)
          RETURN BOOLEAN
      IS
          v_num NUMBER(1);
      BEGIN
          dbms_output.put_line('Value of parameters : user_lock_in : '||user_lock_in || ' : form_type_in : '||form_type_in||' : date_in : '||date_in );
          IF user_lock_in = 1 THEN
              RETURN FALSE;
          END IF;
          IF form_type_in IS NULL THEN
              RETURN FALSE;
          ELSIF form_type_in NOT IN (1,2) THEN
              RETURN FALSE;
          END IF;
          RETURN TRUE;
      EXCEPTION
      WHEN NO_DATA_FOUND THEN
          RETURN FALSE;
      END;
  

  In other cases of use I would issue a local variable and treat it like this:

          IF form_type_in IS NULL THEN
              l_form_type := 0;
          ELSE
               l_form_type := form_type_in;
          END IF;
  

  Of course, the code should use the local variable rather than the parameter.

  It is a good practice to validate values passed in parameters at the beginning of a function. If you really want to go to the city, discover the Design By Contract.

  Cheers, APC

  Published by: APC on November 9, 2011 13:36

  Example added, as requested by OP

• D - Link USB Hub DUB - H7 works do not correctly with Windows 8

  I am also having the same problems.

  Very recently, I went from 7 to 8.1 and with the operation of the steam, the sound of connect/disconnect repeats about every 10 seconds. If I disconnect the D - Link DUB - H7 sound no longer appears.

  I could live with it for the time being cut just sounds system, but unfortunately the problems don't stop there.

  If I have my USB DAC (sound card) connected via the hub, pilots always crashes in a few minutes in Spotify or any multimedia player. It means that I actually listen to music at all.

  Hardware troubleshooting does not detect any problems at all. For now I'll connect my USB DAC separately and cut system sounds, but it is not a solution. Never had any problems with this hub in Windows 7 and I don't really feel like buying another usb hub since it fits my needs perfectly.

  Separated from -.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/d-link-USB-hub-dub-H7-not-working-properly-with/1158a3bc-487d-40C1-b3d0-2419ace3ef2e?page=2

  Hello

  Answer the next question to learn more on the subject, that you are facing.

  What is the brand and model of the computer?

  Install the chipset drivers by downloading from the website of the manufacturer of the computer and check the status of the issue.

  I also suggest you run the Fixit from the link next and if it helps fix the problem.

  Hardware devices do not work or are not detected in Windows,.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Please let us know if you need assistance.

• Bar works do not correctly with IE Spry menus

  Hey everybody,
  I have problems with the spry menu bars, I created with Dreamweaver works fine on internet browsers explore. I have IE 7 on the PC version. What happens when the menus drop down, they overlap else lower down. It is supposed to descend directly to the right of the drop on the other. If you have IE 7, please take a look at my site here: http://www.ironwoodelectronics.com/proto/index.html
  I also have another problem in IE 5 on mac. I have a horizontal menu and it appears vertically in IE 5 on mac and drop downs do not work yet. Is that what I can do to make this work in these versions to explore? I enclose the code sections that I've updated so that it looks the way I want it. Thanks for anyone's help.
  
  Andy

  I understood what was my problem with the position of in the drop-down menus for Firfox 2 and IE 7. I could not use percentages. I had to use em.

  {
  position: absolute;
  margin: 0 0% 0 16em;

  I do not know why it does not work in IE 5 on mac, however. Anyone else know?

  Andy

• 26.0 Firefox works do not correctly with Mac OSX 10.9.1. Text jumps from one side to the other spontaneously

  I used firefox on Mac computers for years. I am now under Maverick Mac OSX 10.9.1 and have major problems with sizing of text in windows and windows suddenly change size (much smaller) and jump on the left side of my desk. Apple does not support Firefox, so I can't get assistance on their part and Mozilla is impossible to contact them directly. Can someone please help with this problem?

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• ALPS touchpad works do not correctly with Windows 8 dm4-2070us

  I upgraded to Windows 7 to Windows 8 on my laptop dm4-2070us, and now I have more use of gestures or scrolling on the Alps touchpad. The left and right buttons work and I can move the cursor anywhere on the screen, but that's all. Everything else seems to work fine. I can't find drivers anywhere for the Alps touchpad for Windows 8. All the world has noticed what is happening? I hope that a new driver will soon be developed but not optimistic. Any suggestions out there?

  Hello

  The ALPS Win8 dm4-2xxx pilot will be SP58700 and should appear on the ftp site, when it is released.  I have no ETA, but it should be soon.

  FTP://FTP.HP.com/pub/SoftPaq/sp58501-59000/

  Wes

• "Home" button doesn't work is not even with the support contact

  H

  Hello to you all.

  I seem to have a problem with my iPhone 5 now. Notifications are not appearing (stills phone vibrate, silent or not), siro does not work (but again, vibration works as if everything was fine.) and by simple click home button does not work, both manually and with a help key. Double-click on works fine, triple clicking too. I tried calibration "home" button but it does not work, and since he made double and triple click, I don't think it's broken. The thing is, even touch home on assistove does nothing. Please help me find a solution thanks!

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  If restarting the force cannot be done because the home button does not react, set it back to factory settings, explained in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS