Similar Questions

• New EarPods works do not correctly with the old iPhone

  Hi, someone I gifted their EarPods. I tried on my iPhone 4S running on iOS 7.0.4 but to my disappointment only left side is audible to all the sound elements of music to Siri. right side is silent, not even low noise at full volume. All other functions of the EarPods as 'change volume' and mike work correctly. But then I tried on my computer laptop Lenovoand they absolutely worked well! The two sides were also audible and clear. I tried again on my iPhone 4s, but the problem occurred again! Other headphones work fine with this iPhone. Now, I know that neither EarPods jack iPhone is damaged (or blocked), it isn't a software problem and also compatible with the iPhone 4S as claimed by Apple. I have now run out of options. Please help me. Thanks in advance. (I live in India, where there is no Apple store, so please don't recommend me to get replace them)

  If you don't insert them completely what you describe happen

  could be a cause of why it is not able to go all way

  1. you did not apply enough pressure

  2. something got into the connector and cause the connector not being able to go all the way in

  all headsets with headphones apple 3.5 mm minijack or otherwise, have always been able to work with any device I connected their ios device or laptop or the likes.

• Questionnaire works do not correctly with the presenter 7.0.7 in LMS

  I use PowerPoint 2003 and presenter version 7.0.7. We previously had version 7.0.1 and quiz worked very well. However, I reissued a course with 7.0.7 and when downloaded on our LMS quiz does not work correctly if a user fails the quiz. Works fine the first time, but not if they fail and must go back.

  The course takes the user initially (as we wanted), but when they get to the quiz to resume it, they pick the correct answer, click on submit and nothing happens. A message should display the so-called "Correct" or "Incorrect" and click to go to the next slide. These messages are not displayed and the user cannot move to the next slide by clicking anywhere (which they should).

  It seems that, behind the scenes, that he might work because if I use the button forward/next down through all the questions after I answer them correctly, it will record that I have completed and passed the quiz.

  I ended up uninstalling 7.0.7 and going back to 7.0.1 and it worked fine. However, I would like to know if there is a solution to this problem so that we can use 7.0.7.

  Thank you.

  7.0.1 is a version quite buggy of the presenter. Have you tried to go to version 7.0.5 or 7.0.6 through the Adobe update 7.0.2? If identified when in the process of updating, there was a change which affected the reports feature to your LMS, which can help identify the problem. Personally, I recommend that you don't touch same presenter, unless it's on version 7.0.5 or later, because it it too great a risk to not do what you expect or just crashing and losing all your work.

  Also, if you access the training in IE9? I remember he had some compatibility issues with IE 9 and presenter, but I thought that was resolved in 7.0.7.

• All usb ports not working does not correctly and the video card are not available with DVI cable

  I recently had a power surge and now none of my usb ports are usable, and I had to switch to analog cable to use my monito., also using the beside picture dvi hdmi cable sparkles.   The Device Manager shows everything works and the appropriate drivers are installed. IM using windows 7 with an asus motherboard P5nesli. IM pretty computer savy but it left me speechless. Cannot connect wireless mouse or keyboard, camera, printer, etc.  truble shooter says that it detects problems but wont tell me what they are and can't fix. Help... Thank you

  Hello

  What is the brand and model of the computer?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Uninstall all the USB controllers, download the latest USB driver on the computer manufacturer site, install on your computer and check the status of the issue.

  Remove and reinstall all USB controllers.

  a. to remove and reinstall all USB controllers, follow these steps:

  b. Click Start, run, type sysdm.cpl in the Open box and then click OK.

  c. click on the Hardware tab.

  d. click the Device Manager button.

  e. expand Bus USB controllers.

  f. right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  g. restart the computer and reinstall the USB controllers.

  h. connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Method 3:

  Update your drivers chipset system to the manufacturer's website and check the status of the issue.

• / CD player works do not correctly with the door of Baldur

  I was playing a game of RPG of older CD called Baldur Gate, I never had any problem, my laptop is out of battery to reboot it back, goes to the game for a split second, then freezes, I've run a startup repair, which froze, I removed the disc, then it starts very well. I put the disc in, go play you and get a blue screen dark, as if the game started but could not. using the Task Manager, I unlock the mobile. Then I got the cd, put it in my other computer, and it plays very well. whenever I put this drive it freezes if I try to expore or play the disc. Help?

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• prompt of dashboard works do not correctly with the default values

  I created 2 dashboard:
  
  Dashboard 1 are:
  prompt A
  report A
  
  Dashboard 2 were:
  B invites
  report B
  
  Report A and B are the same reports as structure and filters. Only have different names.
  Prompt A and B both filtered region attributes:
  Invite a default view in clause sql on the "Région" attribute values: region1, 2, 3
  B quickly view sql clause on the "Région" attribute default values: 4, 5, 6
  
  If I run the A dashboard, it works fine.
  If I run the dashboard B, show me the same values of the dashboard (region1, 2, 3) in the two guests of report.
  If I click on the Clear button, the B dasbhoard runs correctly and shows 4, 5, 6 in the two guests of report.
  
  Seems to be something in the cache. But why?
  
  
  Sara
  
  Published by: Sara C. on 18 / gen/2010 9.41

  Go ahead and skip this step then. I never did, but my colleague has mentioned that you can disable the RPD to be cached at all, so if you are in online mode and you still cannot manage the cache, assume that this feature is disabled.

  In addition, as I said above, I don't think it is a caching problem, it was just more precautionary, so I don't think it will be a big problem.

  Please let me know how the rest goes!

  Kind regards
  Jason

  PS - Out of curiosity, what version of OBIEE do you use? 10.1.3.4?

• My photoshop is flashing, there are problems of compatibility with the graphics card. Help?

  My photoshop is flashing, there are problems of compatibility with the graphics card. I tried to turn off the graphics card option in photoshop, uninstalled and installed several times, but still. Please, what should I do?

  I have an Intel (R) Graphics 5500 HD and Nvidia GeForce 820 M.

  I disabled the Nvidia because it seems to me that Photoshop is not supported.

  Hey Mohit and other colleagues!

  See how I solved this problem (temporarily): workaround Photoshop for screen flashing - YouTube

  I hope that helps for a while this problem.

  Best regards.

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• sound effects not synchronized with the graphics

  When playing poker online, sound effects are not synchronized with the graphics.  I have been instructed to uninstall realtek high definition audio, and then restart the computer.  I heard that this device will be restored during the computer startup.  Safe to do?

  Generally, Yes.

  My advice would be different in the fact that I would tell you to get the latest version of the drivers for your hardware from the hardware provider for the audio device, or at least to the manufacturer of the system.

• HP Pavilion g series: problem with correction of the graphics card Administration says computer not connected, but it is

  PC questions message says: problem with SMA-Display adapt ATI Rodeon graphics cards.

  Click fix, it can not download the probable cause of the fix is pc is not connected to the internet, but I am.

  How can I fix this I don't know what to download

  HI @sami_3,

  Thank you for your inquiry.

  I understand that you receive a message saying: "there was a problem with the AMD-Display Adapter-ATI Radeon Graphics Cards. When you click on repair that you get a message that you are not connected to the Internet, but you are.

  I'd be happy to look for updates, but would need you know your exact model of the G Series notebook.  How can I find my model number or product number?

  You could try the HP Support Assistant to help acquire the right drivers running.  You could also test the graphic cards by running a hardware test on them. HP Notebook PC - hardware failures (Windows 7, Vista) screening. You will find the option for video under components.

  Please send the results of the troubleshooting.

  Please let me know if that solves the problem by marking this post as 'Accept as Solution'. "To simply say thank you, click on the" ""Thumbs up " below!   If you need more assistance let me know and I will gladly do everything I can to help.

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Device Mgr shows a problem with the graphics card

  Mgr. device initially says Code 10, I downloaded a driver (zipped) website of the SiS to 2003 (in the era of the PC)

  Right-click the compressed file, the shortcut menu contains the option "unzip" the files... Unfortunately these just led changing code code 10 code 1... basically the same problem I got it... either the pilot is wrong or not installed.

  Tried again, using Cnet, it was a similar vintage but this time "Winzipped.

  So that I could "unwind" that zipped, I can't do the same thing with the Winzipped file, the shortcut menu does not include an option "unpack".

  Double clicking on it opens a ' run ', which opens the "Winzip self extractor" that has a button seems fair to transfer the file 'compressed' to another location.

  This has the effect that the file is invisible to the driver installation wizard.

  Question:-how you uncompress the Winzipped file so that the driver can be installed?

  Question:-how to install a driver for this graphics card?

  I finally managed to find a driver package actually installed and friendly user who was not compressed with the 'winzip' dratted unfussy... Wow! almost as good as Linux!

  Hello

  You are welcome.

  We are happy to know that your computer works as expected. Please do not hesitate to contact us back, in the case where you are facing in the future other problems with Windows.

• Problems with the graphics card

  Hey, so I spent recently to my laptop HP Pavilion of 15-n298sa of a windows 06:52 and she since has earned me an endless stream of problems, especially with my graphics card. As I am on break from uni I re-uploaded all my games on my computer and found that none of them bar those made before the middle of the 2000s, play for me and for all name them my graphics as being the problem - like solitaire spider fact etc. All have previously been playable, about a month ago, so I know that it shouldn't be a problem. I tried several times to install the graphics drivers (one-I can't remember their names - AMD would apparently install and that NVIDIA could not). When looking at the Info for the graphic drivers installed, "Standard VGA Graphics Adapter" that it's 2006 so I guess that AMD, it has not actually installed / was done wrongly. I was wondering if someone could help me?

  BTW, I'm a complete technophobe and total so if you have an idea of what to do, I would appreciate it if you could put it in other words, because I am a plonker when it comes of this.

  Hello:

  See if this graphics driver works.  Your computer laptop is only the graphics card Intel HD 4400 so don't expect too much of it.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24392

  Product sheet of your model...

  http://support.HP.com/us-en/document/c04102914

• Satellite A300-1EG - dead with the graphic card pixel problems

  Hello

  Not after two months of use of a brand new Toshiba A300, I had a dead pixel.
  Its only I guess, but what intrigues me is that it could be somehow merged with disorders, that I got with my graphics card.
  I had trobule with S-video use, there was a bad image, without collors.
  Is there a chance that I can have my screen replaced?

  Im still under warranty.

  Thank you

  Hello

  Regarding the dead pixel:
  > Is there a chance that I can have my screen replaced?
  I doubt that the screen would be replaced only due to a dead pixel.

  Please check out this article from Toshiba. I found it in the page of knowledge base of Toshiba.

  + What is the maximum number and type of fault of pixel your monitor LCD Toshiba can expose by 1 million pixels? +
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm

  You will find details of the maximum acceptable number of holes per 1 million pixels.

• Huge problem with the graphics card. Help me pls!

  Unfortunately my pc is not guaranteed, so my last hope is here on the forum.

  I have Dell Inspiron 580

  

  Ok.So the problem was that I found myself not being able to open My Nvidia Control Panel to verify customization as one of my games was so bad. That's why I found that my disappeared from Nvidia and Intel HD Core i3 graphics took place.

  

  And yes my pc used to run with Nvidia I have proof: P

  

  I must say that for me (as a heavy gamer) was a great kick as Intel uses all my CPU and my games become so difficult to play.

  I have tried everything that I could to restore the return of Nvidia (except one: to reinstall windows) but not one chance :(

  Reinstalling the drivers did not help actually I don't even know the type of driver that I need because that Nvidia is not found.

  Any advice? It will go to normal if I reinstall windows?

  Thanks guys and sorry for my bad English :D

  Hi Georgina26,

  You use the graphics card onboard because your monitor is connected to the video port badly. Turn off the system, unplug the video cable and connect it to the video card into the PCIe slot.

  If you are not familiar with the snap of a monitor on the back of your computer, please let me know and I will give a link to some photos.