Property 'password' must be set - 1000V

Similar Questions

• When creating an AD HOC network, I get this error "the network password must be 40 bits or bit 140 according to your network configuration".

  created an ad hoc network on Windows 7 Home premium machine.  When the password was presented by the XP machine at home, the message: "the network password must be 40 bits or bit 140 according to your network configuration.  This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. Do not know how to proceed.  Advice requested

  MNewsome salvation,

  I suggest that you download and install the latest drivers for the network adapter on the computer to the adapter manufacturer's website and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also check out the link below and download the document to learn more about the Ad hoc network.

  Special Internet sharing with Microsoft Windows XP

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=13190

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

• The "Remember passwords for sites" setting maintains have turned off whenever I close Firefox.

  After the ESR 38.0.1 (and later upgrade to 38.0.5) the "Remember passwords for sites" setting is disabled after the closure of a browsing session. If I like the beginning of a new session, it works exactly as expected, but the setting never persists between sessions.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • : Uncheck the [] "always use the private browsing mode.

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• How can I configure Windows Media Center to use my Dishnetwork service - the TV must be set to channel 73

  Original title: Dishnetwork Satellitensystem and Media Center.

  I have dishnetwork Satellitensystem and I want to use Media Center. but my TV must be set on channel 73. How can I do this in media center, where options are not higher than Channel 4.
  Thanks for any help

  Hello

  You can try to change the setup of a transmission antenna and then follow the instructions on the link given by Cody to add the string (if she is not found automatically).

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to connect to the router but I get the error: "the network password must be 40 bits or 104 bits according to your network configuration."

  Hi Ive got three computers in the home two of them are not connected to my TALKTALK router no problem, but the third connect once but its gives me "the network password must be 40 bits or 104 bits according to your network configuration. This can be entered as 5 or 13 characters ascil or 26 hexadecimal characters. "error please help

  for any other computer my password work but when I try the same password for this one gives me the message above.

  Thank you all

  original title: 40-bit or 104-bit error

  Maybe you need this patch: http://www.microsoft.com/download/en/details.aspx?id=1974

  What version of Windows using this computer and what type of encryption is the router?

• The network password must be 40 bits or 104 bits according to your network configuration.

  I had a hard time to connect one of my netbooks on the internet yesterday from this thread

  http://social.answers.Microsoft.com/forums/en-us/XPInstall/thread/4c2688b6-247C-467a-89dd-a0c164ec4b89/

  on the way to reconnect to the internet. When I followed the steps suggested that PML, I get the message

  "The network password must be 40 bits or 104 bits according to your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. »

  The only thing that's happened before, it was that the battery is dead and went into hibernation. I was wondering if someone could help me with what to do to fix this problem.

  Edit: this is an acer netbook that I'm trying to connect with.

  Edit 2: I found a solution for him in comparison to a second netbook we have. It was the type of connection, he was trying to do and unrelated to the problem that I had.

  Hello

  To make sure wireless encryption needs.

  There are a few types of wireless networks, and the response of PML due to a problem of the OP has the wrong configuration wireless for the network it is on.

  The wrong configuration mentioned in the thread is company 802.1 x, when it is off there is always a need of regular password to connect to a regular safe home wireless network. Which is probably what your wireless network comes with.

  I don't know what you're trying to connect to (or what you're doing), but apparently the connection you are looking at is safe and you must know the password.

  If not, tell us the story in details, so we can try to give you an answer rather guess.

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• 'TV' must be set on channel 39. How do I do this in Media Center?

  I have a tuner box in another room and the coaxial TV cable that I'm running on my computer must be somehow on channel 39.  Kind of like how a TV used to have to be given to channel 3 or 4 channels for a VCR to work with the TV.  Somehow, I have to get my PC card to be granted to channel 39, so that I can then browse channels. I have a box in one piece only that goes up to three TVs. Must be set to channel 10, one at 23 and the last for the channel 39.

  Hello

  I suggest you to consult the following link to learn more about Windows Media Center.

  Use the Guide in Windows Media Center

• The system is unable to boot automatically. The BOOT environment variable must be set to a bootable image.

  Hey guys

  I need help, in my company trying to learn switches I flashed my switch all :(

  I now get this error

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  I downloaded the c2950-i6q4l2 - tar.121 - 22.EA14.tar for the switch, but I'm unclear on how to load the catalyst 2950 only

  switch: dir flash:
  Directory of flash: /.

  3 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch:

  C2950 Boot Loader (C2950-HBOOT-M), Version 12.1 (11r) EA1, RELEASE SOFTWARE (fc1)
  Updated Tuesday 22 July 02 17:18 by antonino
  WS-C2950-24 from...
  Basic Ethernet MAC address: 00:15:2 b: 46:7 b: 00
  XMODEM file system is available.
  Initializing the Flash...
  flashfs [0]: 1 files, directories 1
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 7741440
  flashfs [0]: used bytes: 1536
  flashfs [0]: available bytes: 7739904
  flashfs [0]: fsck flashfs takes 4 seconds.
  .. .done boot flash.
  Boot sector file system (bs :) installed, isfd: 3)
  Setting Filesystem block (pb :) installed, isfd: 4)
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  switch:
  switch:
  switch: flash
  Initializing the Flash...
  ... The flash is already initialized.
  switch: dir /.
  Unknown cmd: dir /.
  switch: dir

  List of currently registered file systems:

  Flash [0]: (reading / writing)
  XMODEM [1]: (read-only)
  NULL [2]: (reading / writing)
  BS [3]: (read-only)

  switch: 0
  Unknown cmd: 0
  switch: flash_init
  switch: load_helper
  switch: dir flash:
  Directory of flash: /.

  2 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch:

  Hello

  It seems that the image is not in the flash memory. Do you know where you downloaded the image? Once we know, we can understand what statement of startup, you need to do to make it start correctly.

  Thank you

  Garrett

• ORA-04032: pga_aggregate_target must be set before moving on to auto mode

  Hello
  
  I use Windows server 2008 and Oracle 10 g R2.
  I have set the PGA_AGGREGRATE_TARGET 0 and manual workarea_size_policy and bounced to the database.
  But while trying to start the database, it shows me the error below...
  
  ORA-04032: pga_aggregate_target must be set before moving on to auto mode
  
  Can someone tell me how can I start the database or change the setting, thank you.

  Forget a moment EM. Make a file pfile from spfile with the command create pfile from spfile . In this document, change the setting and the value Manual and use this option for the instance using startup pfile =started. Post here the results of the steps of the copy paste the SQL * plus the term.

  Aman...

• Market requires the versionCode must be set to a positive integer of 32 bits in AndroidManifest.xml

  I built an application on flash builder Buritto using the tutorial of " Christophe Coenraets ' building one

  EmployeeDirectory

  and everything worked fine while debugging in the virtual environment but when I try to transfer it to the andoid market im getting the following error: and everything worked fine while debugging in the virtual environment but when I try to transfer it to the andoid market im getting the following error:

  Market requires the versionCode must be set to a positive integer of 32 bits in AndroidManifest.xml

  How can I solve this problem

  help please!

  In your file manifest

  0.0.0 

• Market requires versionCode must be set to a positive integer of 32 bits in AndroidManifest.xml.

  Everything started playing with burrito and made my first android app well followed the tutorial and everything seems ok until the point where I load to the market and get the following error:

  Market requires versionCode must be set to a positive integer of 32 bits in AndroidManifest.xml.

  -app.xml file I found a versionNumber but no code. Tried to add it in vain, added everywhere but still does not work.

  Cannot find anything anywhere. I'm puzzled.

  Hello

  There are some properties in the andriod manifest that you can not set directly.  The them air conditioner sets from you Application XML descriptor file. In the case of the VersionCode, you must assign "versionNumber" in your application XML file.  See p145 of document buildingAirApplications.pdf which I think is downloadable with the AIR SDK. :

  "Content".

  The version number can contain a sequence of three integers separated by periods. Each integer must be a number between 0 and 999 (inclusive).

  Examples

  1.0.657

  10

  0.01.

  My guess is that your version number breaks the above rule?

• ORA-02069: global_names must be set to true for this operation parameter

  I'm trying to insert into a table with a database link. my selection is a database view. I get this error.
  
  ORA-02069: global_names must be set to true for this operation parameter
  
  When I create a table based on select * view and then try the insert, it copies.
  
  Is there something I'm missing when I try to insert a view?
  
  Thank you

  In addition to read below note metalink
  Insertion of data to view mapped Via Dblink to remote Table returns Ora-02069 [ID 467787.1] *.

• For addresses gmail master password must be entered for each address

  Thunderbirtd 38.1.0
  I have 3 gmail addresses, both yahoo and a gmx.
  Function of Yahoo and gmx normally using master password, but Gmail requires the master password for each gmail account.
  So I have to enter the password four times.

  What the master password set up a pop up appears for each address gmail asking me to accept Thunderbird. I accept.

  I note that gmail passwords are encrypted in the list of saved passwords Thunderbird.

  This add-on seems to have security problems and other problems

  What security issues?
  Currently, the add-on is your best bet to deal with the password multiple pushes issue.
  It is of course entirely for you to use it or not.

• Cannot be accessed by Satellite P100-347 after the password of BIOS setting

  My friend has recently created a startup password using the numeric keypad and now I can't access my satellite P100-347 beyond startup even if am to enter the correct password!

  Is there anyway around this problem?

  Hello

  Bad sorry :(

  Unfortunately, you must contact the ASP in your country for this problem.
  Technicians have first remove this BIOS password.
  In addition, I think that to avoid this problem, the BIOS must be updated to version 2.40 or higher and also the Toshiba utility must be updated to version 1.8.14.2 or higher.

  Good luck

• How can Iget the security/password code to set up my wireless printer. I had wireless for years, but I can't find the security code

  my laptop is part of my network with my office.  When I set up the network last year, I don't know where I put the password security code.  I need to install a wireless printer and it is looking for the security/password.  Where can I find it in my computer that should have kept this info?

  Cancel, I found the information I need.  Thank you