Proposed Oracle backup does not
HelloI use the data grid Oracle enterprise manager 10g for the backup of my database is running on APEX
My platform-windows xp
I get the following error when I use "backup Oracle-suggested".
********************************************************
Natural logarithm of output
Recovery Manager: release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN >
connected to target database: ORCL (DBID = 1204354150)
using controlfile target instead of recovery catalog database
RMAN > 2 > 3 > 4 > 5 >
allocated channel: oem_disk_backup
channel oem_disk_backup: sid = 127 devtype = DISK
From pick up to 28 April 09
No copy of the datafile 2 found for recover
No copy of the datafile 4 found for recover
No copy of the datafile 6 found to recover
No copy of the datafile 7 found for recover
No copy of the datafile 9 found for recover
No copy of the datafile 10 found to recover
channel oem_disk_backup: Startup datafile backupset incremental restore
channel oem_disk_backup: specifying data file copies to recover
recovery datafilecopy fno is 00001 name=D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSTEM_4TW6C38C_. DBF
recovery datafilecopy fno is 00003 name=D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSAUX_4TW68G50_. DBF
recovery datafilecopy fno is 00005 name=D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_TABLESPA_4TW6GOTT_. DBF
recovery datafilecopy fno is 00008 name=D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_FLOW_1_4TW6DTMK_. DBF
output channel: oem_disk_backup
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the command recover at 28/04/2009 18:45:16
ORA-19625: error identifying file D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSAUX_4TW68G50_. DBF
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
RMAN >
Complete recovery manager.
***************************************
I looking disk "Flash recovery area" dafault target D:/backup and changed the backup settings and recovery settings by changing the flash as D:/backup recovery area
Now its display "Falsh recovery 9,993 GB used space (the limit is set as 10 GB)"
But when I run custom backup it does no problem.
What are all the files that will be created inside the Flash (i.e. d:/Backup) recovery, there are now 3 files... (ARCHIEVELOG, AUTOBACKUP, FLASHBACK)
Please help me...
Thank you.
Hello
It seems that your copies of images have been deleted because the overlap failed for:
D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSTEM_4TW6C38C_. DBF
D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSAUX_4TW68G50_. DBF
D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_TABLESPA_4TW6GOTT_. DBF
D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_FLOW_1_4TW6DTMK_. DBF
If you still have their copy backup and restart< crosscheck="" copy;="">
Now you should be able to run your backup suggested Oracle.
If it does not do< delete="" expired="" copy;="">
That re - run a backup of level 0 with oem.
Last resort, you can run a manual level 0 times and oem allows to run like before gradual recovery.
Kind regards
Tycho
Tags: Database
Similar Questions
-
Backup does not recognize the previous backup CD
When you click on backup:
1. backup does not recognize the last backup cd. The only beginning of path to create a shadow copy backup is to insert a blank disc. How can I fix it?
2 ive run backup from one day to the next day while he created a cliché. In the morning, it is only 1/5 complete suggesting that it is not working properly. I canceled the backup. How can I fix it?
3. If I try to do another backup he asks the cd of your previous (cancelled backup) despite the fact that it was cancelled and the cds do not exist. How to reset to ask these latest records backup?
Since then, I have downloaded all windows updates but the problem persis
Thank you, Kel
You mean by cliché, creation of backup image, right? Shadow copy volume is not Windows Backup.
If you canceled the backup Windows is trying to finish the last backup. It's normal.
All over again, trying to backup in a different medium, an external HARD drive.
At first is a stop at the backup in progress"
- Restart the computer
- Run as administrator command prompt and run this: wbadmin stop job
- Typing sdclt.exe in command prompt and click on change settings
- Connect your external HARD drive or DVD
- If changing the settings is not available, then click on set up automatic file backup
I hope that it will work. Please let me know the results to help others.Kind regards
Helene
Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer
-
Windows backup does not complete
Same as above
every other day I get a msg on my windows backup does not complete. What's wrong? I have inserted SEVERAL CD and it never seems to have solved! What should I do?
Hello- What type of files are you trying to backup?
- What version of the Windows operating system do you use?
- You receive an error code?
Do not include the libraries while safeguarding and then check what is happening.Here are some articles that you can consider moving by before starting the backup.
Back up your files
http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
Back up and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
Back up your programs, files and system settings
http://Windows.Microsoft.com/en-us/Windows7/back-up-your-programs-system-settings-and-files
Should what backup settings I use to maximize my disk space?
http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space
Post back with the State for additional troubleshooting steps. -
I would like to know why my backup does not run at the scheduled time.
If I chose to run 'immediately' it works without problems and a folder called '0' is created in the D:\Backup_CSM.
Scheduled backup does not run and I don't see any info in the newspapers and I get no emails!
How to debug?
See the images.
https://DL.dropboxusercontent.com/u/1538524/backup1.PNG
https://DL.dropboxusercontent.com/u/1538524/Backup2.PNG
Hello
What version of CSM are you running?
I ran into a similar problem with CSM 4.4 where the problem is the backup process would get an empty space ahead of time and then not run.
A fix for this problem was published in MCS and MCS 4.5 4.4SP1.
If you run CSM 4.4 a workaround would be to schedule the backup between 10:00 & 11:59 or 22:00 and 23:59.
Bug is available in the Toolbox with the No. CSCug45741 bug bug
concerning
Michel
-
Hello!
I want to do the backup schedule. According to the user's guide:
You can create a backup scheduled for the primary instance. To create, reproduce or modify a regular
backup:
Step 1 Choose System Administration > operations > at the request of the backups.But the Administration of the system > operations > scheduled backups does not appear in ACS 5.0.0.21.
How can I save?
Hi Alexander,.
Could you please confirm which link you found these instructions?
It seems that these are the instructions of the ACS 5.1 user's guide, but we do not have a similar option on ACS 5.0.
Kind regards
Fede
--
If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.
-
service Oracle script does not...
a newbie question...
I installed oracle 11g R2 on Suse 11 and I created /etc/init.d/oracle script:
also, I changed the permission chmod 750 on thisORA_HOME=/opt/oracle/product/11.2.0/dbhome ORA_OWNER=oracle if [ ! -f $ORA_HOME/bin/dbstart ] then echo "Oracle startup: cannot start" exit fi case "$1" in 'start') #start oracle database su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl LISTENER11 start" su - $ORA_OWNER -c $ORA_HOME/bin/dbstart ;; 'stop') # Stop the Oracle databases: su - $ORA_OWNER -c $ORA_HOME/bin/dbshut su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl LISTENER11 stop" ;; 'Required-Stop') #aaa ;; esac
When I type chkconfig--add oracle, I received a message:
What did I miss?insserv: script jexec is broken: incomplete LSB comment. insserv: missing `Required-Stop:' entry: please add even if empty. insserv: script jexec is broken: incomplete LSB comment. insserv: missing `Required-Stop:' entry: please add even if empty. insserv: script jexec is broken: incomplete LSB comment. insserv: missing `Required-Stop:' entry: please add even if empty. insserv: script jexec is broken: incomplete LSB comment. insserv: missing `Required-Stop:' entry: please add even if empty. insserv: warning: script 'S12oracle' missing LSB tags and overrides insserv: script jexec is broken: incomplete LSB comment. insserv: missing `Required-Stop:' entry: please add even if empty. insserv: script jexec is broken: incomplete LSB comment. insserv: missing `Required-Stop:' entry: please add even if empty. insserv: script jexec is broken: incomplete LSB comment. insserv: missing `Required-Stop:' entry: please add even if empty. insserv: script jexec is broken: incomplete LSB comment. insserv: missing `Required-Stop:' entry: please add even if empty. insserv: script jexec is broken: incomplete LSB comment. insserv: missing `Required-Stop:' entry: please add even if empty. insserv: warning: script 'oracle' missing LSB tags and overrides insserv: script oracle: service oracle already provided! insserv: script jexec is broken: incomplete LSB comment. insserv: missing `Required-Stop:' entry: please add even if empty. insserv: warning: script 'catalina.sh' missing LSB tags and overrides insserv: Default-Start undefined, assuming default start runlevel(s) for script `catalina.sh' insserv: warning: script 'setclasspath.sh' missing LSB tags and overrides insserv: Default-Start undefined, assuming default start runlevel(s) for script `setclasspath.sh' insserv: warning: script 'tomcat' missing LSB tags and overrides insserv: Default-Start undefined, assuming default start runlevel(s) for script `tomcat' insserv: exiting now! /sbin/insserv failed, exit code 1 oracle 0:off 1:off 2:off 3:on 4:off 5:off 6:off
Salvation;
Please close this thread as answered and update your other post which is available at:
service Oracle script does not...Respect of
HELIOS -
When I click 'save your computer' nothing happens. I tried all the solutions I found here and other forums. I checked the level backup engine service block, Volume Shadow Copy and backup Windows are set to automatic and are running. I ran sfc and he found no problem. I am able to start sdclt.exe / configure in a command window and it runs and gets "Starting Windows Backup followed by implementing backup...". and more of what seems to be OK.
I can't just start it fron Control Panel. Everything else on the control panel works fine.
Help, please
JJ
Hello1. what exactly happens if you mean when you talk about "clean boot does not work? Please provide details.
2. have you tested the issue in a new user account, as suggested earlier?Boot fails only when you have disabled a vital service of Microsoft (S). You must observe extreme caution when performing the clean boot procedure.Note: Don't forget to restart your computer as usual after the clean boot.PS: Your son is better suited to the Performance category, so this would be moved (Again) to performance and maintenance
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
My "restore from backup" does not end as the screen lock appears
I got a new iphone with 64Meg and OIS 9.3.3 6 operating system. Before putting in my business phone; I backed up my data on itunes using my PC with Windows 10. As I'm trying to "restore backup" on an iphone same 6, I was unable to do, when to halfway through the download process, the screen lock appears and disconnect the iphone from itunes and the download stops. It seems to be appx 29 minutes for download; but I never got rained only 7 minutes to download completion before the screen is locked or the battery at 100% load indicator disconnect the iphone.
I have disabled all notifications, deleted my AOL Mail, set the screen saver to "never", off of password, all without success. Help!
Hello, Franklytex!
Welcome to the communities of Apple Support and post your first message! Looks like you have a problem to restore your backup from iTunes. I know how important it is that your iPhone can be restored properly! Read this article which has steps for you If your iTunes backup could not be completed or you can not restore from a backup. More precisely:
Try again after each step
- Make sure you have the latest version of iTunes.
- Connect your device to your computer with a cable USB, then Select your device in iTunes. If your device does not appear in iTunes, you must correct this problem until you can continue. Or, if you have forgotten your password or your device is off, know what to do.
- Turn off your computer and your iPhone, iPad or iPod touch. Then turn on again them.
- If you use a Mac, skip this step. If you use a Windows PC and iTunes will not respond or never ends your backup, you may need to to update, edit, disable or uninstall your security software.
- If you have multiple computers, try to make a backup on your other Mac or PC. Otherwise, use iCloud for save your device and restore it from your backup to iCloud.
- If you see an alert indicating an error has occurred, your backup is corrupt or incompatibleor there is not enough disk space, find your error message below to learn what to do next.
- Contact Apple technical support.
See you soon!
-
Time Machine: Do not back up available.
I have a number of issues at hand today. I'll try to give a bit of history - so I apologize for the story.
Replaced my drive HARD crashed in October 2015. I restored Mt upward, everything worked fine. However, my TM return will not save - and does not sense Oct 2015.
I wiped the APTC and did a factory reset. But it will not save. When I select the drive of the APTC, I get this: of the disc have been replaced or deleted, or someone may be trying to fool your computer into the incorrect disk backup. "Try to eject the disk image." I eject it, restart the backup process. The TM shows my old backup information (see screen capture below).
When I get the device works, I said can't find the backup to John...
Please notify.
iMac - El Capitan 10.11.3
TimeMachine uses the single disc Login name disk or something else instead.
It is lost in the transition from the disk dead again.
Quit TimeMachine.
Connect the TC, open the TM preferences, click "Select disk", select the TC and then click on the button "Disk use".
Click on the 'Options' button, then drag the disks/Partitions that you do not want to be saved in the window, then click on "Save".
It may be that TM starts a new backup (which will take a while).
-
After trying to import my favorites saved in an html file, using bookmarks > organize bookmarks > import and backup > import html, nothing is being updated from saved files
This isn't "machine code", it's like a JSON backup file is formatted (except it usually shows no line breaks, it's a long line when displaying in most text programs or in Firefox). Rename a JSON file as HTML does not work, the formats are completely different.
If you replace this file in jsonextension, you should be able to restore these data in Firefox.
Bookmarks > organize bookmarks-> import and backup - restore - Choose file... -
Backup does not work in XP Pro
When I go to save my files under XP Pro SP3, nothing happens except I get a window semi completed for the backup that freezes and does not close. I have used this for years and now all of a sudden this! Any ideas?
12 miles
Try the following links
Windows 95 Backup troubleshooting
http://support.Microsoft.com/kb/130946
How to solve DMA errors while using the backup
-
Verification of Microsoft Backup does not have
I have used the backup in the tools system for many years and have
never had any problems. But in my last two backups, both
Audit process have failed, and under the "backup status", he said
"FAILED". In the backup report, there were a couple of files that
could not be back with the error "it is either corrupt or not.
existed"and has been omitted.I looked at the backup file and it seems to have the total size of the
backup like I have in the past. And when I clicked it, the
Restore Backup Wizard came. Could someone please tell me what might
be problems. Corrupted files that show have been in my player
for a long time and have not changed at all. So I know that they have been
not corrupted and does not exist. And the backup file I have, it's a good
that or it could not be used to restore if my drive failed?Comments/suggestions are appreciated.
FYI, I'm using Windows XP SP3.
Thank you.
It might be that backup just had problems of access to the file for some reason any. Maybe a process has an exclusive open about it. You can try to start safe mode (press F8 at startup) and make your backup in Safe Mode. This prevents unnecessary processes that could interfere with the backup of the race.
HTH,
JW -
Recently, I used the system recovery on my dv5 and chose everything on my external backup hard drive. Now, when I try to access all that stuff back, I run the executable backup. For unexplained reasons, however, the program does absolutely nothing. I double click, run as administrator, everything, but it does not open anything, or any process or application is located in the Task Manager which has nothing to do with it. I really need my files and this software fails completely. As grievously disappointed in HP as I am (it's my first HP computer), I always feel like my stuff. Can anyone help?
Message edited by Strategos on 02/12/2008 17:05Laughing out loud... Although I did some research more...
go to hp.com and do a search for "sp36300.exe" (without the quotes), under the search results you should see 'enhanced HP Backup and Recovery Manager for Microsoft Windows Vista - HP Business Support Center' click above and download and install HP Recovery Manager and backup , and then try the steps listed in the previous post
Let me know if it works
-
Original title: Outlook backup problem
I support my computer using an external hard drive. "It does not backup Outlook, declaring: the request could not be performed because of an i/o device error. (0x8007045D). What should I do?
Hello
1. How did you perform the backup? He used the Windows backup and restore functionality?
2. you have any third-party backup software installed on your computer?
3. have you done any software or hardware changes on your computer before this problem?
To work on the issue, check the following link.
Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
http://support.Microsoft.com/kb/952272CHKDSK warning:Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.See also:Back up your filesHope the information is useful. -
My computer backup system does not work. Whenever I put in a new disk, format and the program starts, I get the message "the disc in the drive is a previous backup disk. However, this is incorrect.
Are you using the Vista backup or any other backup program? Have you tried using the other disk? It seems that there are already data on this disc.
Let us know
Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forumand let us know what you think.
Maybe you are looking for
-
Direct print wirelessly from iPad Pro w/o third-party app?
I want from my iPad Pro laser-printing on a printer wireless to work. My corporate network, however, is not configured to allow wireless printing; I have to work around the network with a direct wireless printing. I know that a lot of printers don't
-
How to cancel an order to "do this automatically" I have shouln t hit.
I double click on an attachment photo (JPG file). I was given the choice of 'open with' or 'save to disk '. I chose 'save to disk' to this particular photo, but then I made the mistake of checking the box "Do this automatically for files like this in
-
problem with the drive map satellite p200-1ba (pspb6e) on windows 7
Hello! I have recently upgraded to windows 7 and my card reader does not work. I have a laptop p200-1ba (pspb6e) satellite. I installed intel chipset utility, robson package and everything seems fine in Device Manager, but nothing happens when I inse
-
Array of bytes Streaming playback
Hello: Could someone french me some light, how could I impliment line three of the code in Labview? I have a pulse oximetry sensor conncected to Labview via a serial port VISA. Communication is very good, and I read 5 bytes successfully. However, eac
-
I can not find msconftg on my phone samsumg
I can't find msconfig on my Samsung laptop