Protect nest wants several ports per device IP address

Similar Questions

• Frequent disconnects on 1 device (several times per hour)

  Hello

  I bought the Amazon N300/WNR2020v2, a month ago. Is the latest firmware (V1.1.0.32_1.0.1). I can't remember if it ever worked right, but I get frequently disconnects. And by frequent I mean several times per hour (up to 10, 20, 30 times per hour). Sometimes my connection will last 30 minutes, sometimes 2 min. I'm a developer and I work from home, so it became completely unworkable. I absolutely can't do anything more than a few minutes without disconnecting.

  Things, I tried, without success:

  -Changing the channel

  -Reduce the MTU 1420

  -Various DNS (8.8.8.8..),

  -Change of speeds 54/150/300

  When the connection drops, it is not just my internet connection, I cannot ping the router either (so I have no internet and no local network).

  I had another router before, and everything worked just fine (ASUS WL-330gE). Unfortunately, I lost it, so I can't come back.

  I must also say that I have a good amount of connected devices (maybe 10), but you know, it's just modern life (printers, computers, phones, dropcams,...).

  Advice? I can't work essentially. It's very frustrating.

  In fact, I talked to my wife after the announcement, and she said that she does not know the question. I tried to leave her computer open watching the Dropcam next to me (if I have something that uses the connection permanently and I can easily monitor), and that she feels no drop, which means that the issue could in fact be my computer (which is weird, because it works very well at work).

  Came across this:
  http://Apple.StackExchange.com/questions/235739/constantly-dropping-Internet-on-El-Capitan/248228

  And it seems that this can be fixed:

  sudo ifconfig down awdl0

  I will update in a bit to see if it really fixed. I've seen the issue on my phone too, so I'm not sure that this, it is 100%. We'll see.

• Interfacing with several unknown USB devices; all producing NMEA strings

  Hi all

  Question about the peripheral USB interface and their associated drivers.

  I have the obligation to build an application that interacts with the USB devices that produce NMEA strings. I have the library to parse NMEA strings, but I fight with interfacing with several unknown USB devices. When deploying applications, I know not all possible USB devices to use.

  Is it possible to produce one driver who will accept any USB device strings?

  Or, more likely, is there a way to get the LV to recognize a connected USB device and automatically find / install the driver like windows does and is it possible to do in a deployed application?

  I had a trawl of the forums, but I've not found anything that specific.

  Thanks, I really appreciate the help.

  About the VI "set up the serial port", my problem is that the choice of COM port is in a separate menu (not directly related to the VI) and it allows all possible COM ports to be selected. That can be addressed.

  I am not expecting an all-in-one solution but asked the question in case it was possible.

  What I realized, is that for my specific condition to read strings from a USB device. It is likely to be sent over a serial connection. LV can handle this well and easily assuming the device has the installed driver / settings are available.

  LV (and indeed any other program) will not work without a device driver / settings. In this case, parameters set must be found (error) / a USB RAW driver would need to be developed. Devices requirng a RAW USB driver would need a serious review to continue due to the time and effort required. All this effort is work inherited from the AIDS to navigation

  I appreciate any help and I think I got the answer I was looking for! Thank you very much

• Use several images per second

  A time-lapse video that I shot, I want to playback for several frames per second speed.

  for example: I did 400 pictures and now I want to play in 40 seconds (10 FPS)

  What I tried was:

  load all the images in the order in Premiere Pro

  Select all images

  -> menu "speed/duration.

  Now here's the part where I'm stuck.

  If I lower the duration per photo for as little 1 second, everything works perfectly, but if I try to define the area of seconds to '0' and the column next to it a value [e.g. 00:00:00:20] my video is messed up.

  Images indeed last for less than a second, but I get a lot of 'empty video' between the images.

  For some reason the ripple edit is not seems to work more enter durations of a second, because it does not automatically paste all together separate images more.

  How can I try to fix it?

  Also, what format is the column after the seconds? What miliseconds? It goes 0 to 99?

  Set the length of the frame in the form of 3 frames in preferences before loading them into the project.

  You may need to re import to do this.  I don't think it's possible if they are already imported and certainly cannot be done if the timeline already.

  You can then drop them in a sequence or you can select all the and drop automatically.  There are options for their order.

  Now, if they are in the timeline... SELCT all and see if you can right click > time 3 frames per second

• RDS per device CAL

  According to https://technet.microsoft.com/en-us/en%C2%ADus/library/cc732416 ' a permanent RDS per Device CAL issued by a license server is configured automatically expire after a random period between 52 and 89 days, date at which the RDS per device CAL returns to the pool of RDS available by user on the license server licenses. Station Remote Desktop connection is then broken. In my environment of industrial work, we prefer / expect the connection continues permanently. How to configure the program does not expire? Thanks in advance.

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• try to sync the music on my SD card box appears and asks if I want to format the device I click on the box to format, then he said: he can't format my device

  original title: How do I format my device

  I'm trying to sync music on my SD card in windows media player dialog box appears and asks if I want to format the device I click on the box to format then he said: he can't format my device

  Hello
  If there are no files on the SD card, go ahead and format. If there is, it is enough to click Cancel and open the folder in the folders where your music.
  B Eddie

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• Can I use a working android code to build a pure Java application. I don't want the port directly.

  Can I use a working android code to build a pure Java application. I don't want the port directly.

  I want to convert an android app for Bb 10 working versions of a Java for BB 6.0 and 7.0 application verson etc.

  Laughing out loud
  Android use j2se, bb os use j2me (+ extensions).
  a few basic java classes and functionality (collections, reflection etc) will be unavailable on java bb as he (resp. j2me) is based on java 1.3/1.4

  in my experience most logical profession can be reused with minimal changes (such as the use of vectors instead of the list, etc.), but UI has to be redone completely.

• The code of unknown 43 for a port specific device on my computer laptop no matter what I plug into it, printer, USB key, etc.

  The code of unknown 43 for a port specific device on my computer laptop no matter what I plug into it, printer, USB key, etc.

  Hi Jack,

  Thanks for the reply.
   
  See Web Gateway site to update the chipset and BIOS drivers.
   
  Gateway support link.

  http://support.gateway.com/product/default.aspx?modelId=2375

   
  Let us know the result. If the problem is still not resolved, we will be happy to help you further.

• I get started internet several times per hour

  I have a Toshiba Satellite.  I'm off the internet all the time.  Several times per hour the Road Runner cable co Ihave said that's not the problem please help

  Also check action center and drivers Windows Update will offer to you once they become available.

• Ports per ASIC on a 2232PP

  Anyone know how many ports per ASIC on a FEX 2232? We lost the connection to some servers, and they are on four ports (ports 5-8) consecurive that smells of an ASIC dying.

  Thank you

  Pat

  There are eight by switching subsystem.

  FEX-114 # display software platform woodside m

  Presentation of the card status:

  Legend:

  ' ' = no-connect

  X = failure

  -= Disabled

  : = Dn

  |   = Up

  [$] = This FPS

  There is no [] = SFP

  [X] = SFP validation failed

  ------------------------------

  (TO BE DETERMINED IN FINAL POSITION)     Uplink #: 1 2 3 4 5 6 7 8

  Link status:: |  |

  +-+--+--+--+--+--+--+--+-+

  SFP:       [ ][ ][ ][ ][ ][ ][$][$]

  +-+--+--+--+--+--+--+--+-+

  | N N N N N N N N |

  | I I I I I I I I |

  | 0 1 2 3 4 5 6 7 |

  |                        |

  |        NOR (0-7).

  +------------+-----------+

  |

  +-------------------------+-------------+-------------+---------------------------+

  |                         |                           |                           |

  +------------+-----------+ +-----------+------------+ +------------+-----------+ +-------------+----------+

  |        HI (0-7).        SALVATION (8-15) |       SALVATION (16-23).        SALVATION (24-31).

  |                        | |                        | |                        | |                        |

  | H H H H H H H H | H H H H H H H H | H H H H H H H H | H H H H H H H H |

  | I I I I I I I I | I I I I I I I I | I I I I I I I I | I I I I I I I I |

  | 0 1 2 3 4 5 6 7 | 8 9 1 1 1 1 1 1 | 1 1 1 1 2 2 2 2 | 2 2 2 2 2 2 3 3 |

  |                        | |       0 1 2 3 4 5 | 6 7 8 9 0 1 2 3 | 4 5 6 7 8 9 0 1 |

  +-+--+--+--+--+--+--+--+-+ +-+--+--+--+--+--+--+--+-+ +-+--+--+--+--+--+--+--+-+ +-+--+--+--+--+--+--+--+-+

  [ ][ ][ ][ ][ ][ ][ ][ ]   [ ][ ][ ][ ][ ][ ][ ][ ]   [ ][ ][ ][ ][ ][ ][ ][ ]   [ ][ ][ ][ ][ ][ ][ ][ ]

  +-+--+--+--+--+--+--+--+-+ +-+--+--+--+--+--+--+--+-+ +-+--+--+--+--+--+--+--+-+ +-+--+--+--+--+--+--+--+-+

  -  -  -  -  -  -  -  -     -  -  -  -  -  -  -  -     -  -  -  -  -  -  -  -     -  -  -  -  -  -  -  -

  1 2 3 4 5 6 7 8 9 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3

  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2

  FEX - 114 #.

• You can print several slides per page (instead of 1 slide / pg) with eprint?

  I have a HP Deskjet 3070 with technology eprinting and my computer is running Microsoft Powerpoint 2010.

  I would like to customize the way my powerpoint slides are printed when I send it to my address of email eprint as an attachment. In particular, I would like to print several slides per page for the purpose of taking notes. Is it possible for me to do this? Thank you very much.

  Hi yeeyucai, it is not possible to control print settings outside the color/shades of gray and paper size, when you use ePrint by sending your file as an attachment to an email. I don't know if your computer is a laptop and if there are times when you need to print your Deskjet 3070 remotely, but if so, then you can do this by installing the driver Mobile HP ePrint. Once installed when you try and print from Powerpoint you will see HP ePrint listed as another available printer and when you choose this option, you can search your Deskjet 3070 by email address and set the number of pages per sheet for whatever the desired number. Obviously if your computer is a desktop, there is little value in installing the driver, unless there are other active ePrint printers you sometimes send content to.

  Let me know if this makes sense or you need help with the Setup program.

• Cisco ASA cannot create several tunnels at the same address in hand?

  We have several remote sites with Linksys WRVS4400N and Smoothwall firewall/vpn devices.  I need these sites to be able to connect to several tell-contiguous subnets to our main office.  This was done easily with smoothwall and linksys.  You create a separate tunnel for each subnet, and voila, you're done.  However, when I tried this with our ASA newly installed, it won't let me create several tunnels at the same address of the remote peer.  It is a problem because these sites have only a single IP address public static.  Did I miss something or ASA not allow connections to and from multiple subnets form a site with a unique address peer?

  Resembles the limitation on the WRVS4400N as Cisco ASA supports several subnets by tunnel.

  Is there anyway that you can configure a subnet more instead of specific subnets on the ACL?

  For example:

  If you 192.168.0.0/24 and 192.168.1.0/24, instead of having 2 subnets configured, you can combine them into 1 subnet 192.168.0.0/23

• How can I configure the message undeliverable in the e-mail to a specif per person email address

  I get hostile emails to a specific e-mail address.  It was agreed through mediation of the Court that that person does not contact me in a form in any way.  The sender is trying to make me respond to his emails in relplying return.  I refuse to do.  I want to put in place a message not delivered to return to her if she thinks that this (* address email is removed from the privacy *) is no longer my email address.  I was on the phone to 141 minutes last night to my ISP who have tried everything , including the implementation of a Developer tab.  She was really trying hard and we really loved ones however something if he stopped to go through but we / she couldn't get out. She suggested that speak to you guys.  I also want to note that when I created this account to get here, microsoft email, I chose, which is the email in question and also cannot be changed would not send and receive your confirmation email.  I hope that this doesn't have anything to do with what we were doing yesterday evening. I tried to return a confirmation email to the address majestique a few times, but it didn't work.  I used a different address.  Please help me.  I would appreciate your help and peace of mind, I'll get to block her emails.  I do not just want to 'block sender' I want her to stop sending emails.

  Thank you
  Nicki

  You try to deceive you want to keep the same email address and hope to deceive it no longer works.  I seriously doubt that the approach will work.  Finally it is (early or), and it is difficult to adopt without blocking mail you want to receive.

  The absolute best thing you can do is to save all messages documentation for the Court, but ignore completely, even where the non-reading and their openness.  You are being harassed by some sort of response and the best you can do is nothing.

  It is just my opinion, but reacts in any way to any messages, for me, is just what she wants.  You stop him from doing, just so ignore, or record messages and bring them to court and him.

  see you soon,

  Steve

• you want to know why my email address does not work in my muse contact form widget?

  Hello:

  You want to know why my email address does not work on my muse contact form widget?

  

  Hi Omar,.

  Please see: Troubleshooting Muse form used on the servers of third party Widgets

  Kind regards

  Akshay