Similar Questions

• Help for the preparation of an emergency on a drive disk external drive via., Dell backup and recovery (DBR) - Basic Version

  I have a laptop Dell Inspiron

  IAM intend to make a rescue disk via., Dell backup and recovery (DBR) - Basic Version

  Now, it says WRT below external link that this process will create two partitions on the hard drive.

  (Wipe all prior content of course.)

  DBR_BOOT (25 MB used out of 500 MB on a FAT32 style MBR partition)

  DBR_MASTER (9.7 GB used off GB 921 on a style of MBR of NTFS partition);

  [See:en.community.dell.com/.../19499639]

  Now, my question is will I be able to save my other files on the external hard drive that I use for the above process?

  (as the above process creates two partitions of 921 GB & 500 MB)

  IAM intend to save a system image from my computer on this disc well also, I have a few 250 GB of personal & video files

  (Iam that will buy a drive hard 500 GB to make the above process...)

  H ipkmishra86,

  You will need to copy your other files on the hard disk before the distribution, you will lose it. When you have completed the process you can put back them on here.

• How to reverse the primary and recovery sites?

  I have a RS v5 working environment has been installed a year ago.  Failovers and test failovers work well.   However, now I have said that I need to reverse the primary sites and recovery, as the roles of our data centers have changed (GRRRRRRRR!)

  I'm under ESXi and vCenter v5.  I have a vCenter server and SRM server in each data center.  I have multiple LUNS 500 GB with protected VM.  How do I go about replacing this SRM such as SiteA (primary) infrastructure / SiteB (recovery) becomes (resumed) SiteA / SiteB (primary)?  Should I rebuild completely?  Or can I keep the existing installation on the servers of the SRM and change the configuration of SRM in vCenter?

  Thank you!

  Why not simply perform a migration scheduled from A to B and then re - protect?

  Rym.

• "The remote server returned an error: (502) Bad Gateway" while matching Protected Site VC and recovery Site VC in VMware SRM

  Hi all

  I am trying to Setup VMware SRM 4.1 groups. I had configured hitachi usp vm storage based array replication in both sites.

  Now when I try to pair the two sites vCenter, I get an error at the end of the phase of matching as message "the remote server returned an error: (502) Bad Gateway ' on the protected site. But surprisingly, I am able to match both the vCenters on the recovering site.

  Please help me to get the problem.

  Thanks in advance,

  Sanjeev

  Run telnet server vCenter/SRM protected site to the recovering site server vCenter/SRM:

  Telnet IP_ADDRESS 80

  Telnet IP_ADDRESS 443

  You succeed?

• SRM and Protection recovery site

  I'm new srm

  I'm a little confused with srm,

  I have a scheme like this

  

  Can I use the site 1 as protection, but it also makes the task of the recovery of site 2 site and 2 Site also like this site protection and recovery for the site 1?

  pls me have mine of open mind.

  Thank you

  I think you are talking about active-active site scenario... and Yes, it is possible.

  

• SRM protected site and recovery - different network

  Small question about SRM and networking.  MRS works correctly if my protected site includes a cisco 1000v while my recovery site just has a vSwitch?

  Someone would be able to provide some site for this?

  Thanks in advance.

  When you configure the mappings of Site Recovery Manager, you map port groups, calculate the resources (i.e. clusters), resource groups and folders from the site protected on the recovering site.

  When you switch, the virtual machine will migrate port groups that this is in the protected site, for groups of port mapped to corresponding to the recovering site.  As long as you protect virtual machines can access the resources they need, by sliding, port groups, they will be in when they move to the recovery site, so I don't think that you will have problems, Cisco 1000v or not.

  While I have never done a failover of a 1000V to no, I'm not "see why you would have problems as long as you get your physical and virtual network on the site of recovery after a disaster.

• After the upgrade to the new version of firefox 13.01 I can't play video on youtube and other sites what should I do?

  After the upgrade to the latest version 13.0.1

  I can't open videos from youtube and other sites

  I tried all the solutions, but none works

  I would also consider the following. Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox 13 are probably caused by a recent update of Flash 11.3 and/or Real Player browser plugin to malfunction.

  To resolve this problem, follow the steps in these articles in the Knowledge Base:

  Flash Plugin - maintain and troubleshoot

  Adobe Flash plugin has crashed - avoid that it happen

  11.3 Flash does not load video in Firefox

  We'll find other information on more technical issues under these links:

  http://forums.Adobe.com/thread/1018071?TSTART=0

  http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

  Please tell us if it helped!

• Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  and I don't know that if Apple make a system more freely, there no need for any device on Earth but iPhone.

  http://www.Apple.com/feedback/

• I'm trying to complete my FAFSA, and the site said I had no upgragded in my browser version, I downloaded the latest version of Firefox, and I still get the same message.

  FAFSA is the form to fill out for financial aid for College. I need to fill out the form later for the spring semester of next year. Until I'm able to fill it in online and save and send to school. When I'm on the site and click on fill out a form, a message came that I didn't have the right version of my browser, so I downloaded the latest version of Firefox, and then restarted the computer and is returned to the site to try again and got the same message. Then I had two shortcut icons on my desktop and I can't say that one is for the latest version of Firefox.
  When you download the latest version, it removes the last version that you had previously downloaded?

  Fafsa.gov site can't stand no more recent than the version of Firefox 3.6.x. It's their choice.

  • FAFSA browser requirements: http://www.fafsa.ed.gov/fotw1112/help/beforebrowser_req.htm

  You can install the version of Firefox Portable for use only on this site and use your current version of Firefox for all the rest. Firefox Portable is not produced by Mozilla (but it is based on the versions of Firefox released) and only is not supported on this site - has its own support forum (see below). Firefox Portable installs in a separate folder on your hard disk so that it does not interfere with your currently installed version configuration Firefox or personal information (bookmarks, passwords, etc.). You can also install Firefox Portable on a USB/thumb/pin/jump drive.

  • General information of Firefox Portable: http://portableapps.com/apps/internet/firefox_portable
  • Firefox Portable 3.6.24 download links: http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
  • Firefox Portable user forum: http://portableapps.com/forums/support/firefox_portable

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• I downloaded and installed the new version of Firefox, but I always get the message that my browser is out of date when I check my plug-ins on your Web site. Help, please!

  I got the message to update my browser, I went on the site and download the latest version of Firefox. I update my plug-ins as well. However, I always get the message that my browser is obsolete. I uninstalled it, reinstalled, without success. Please help me. When I go to help and select about Firefox, I have that I use the latest version: 6.0.2.

  See https://support.mozilla.com/en-US/kb/new?title=Web+sites+or+add-ons+incorrectly+report+incompatible+browser

  Check general.useragent preferences on the topic: config page.
  
  You can open the topic: config page through the address bar just like you open a Web site.

  Filter: general.useragent

  If all general.useragent prefs are "BOLD" (user set) then right-click this pref and select reset.

  It would be probably due the FBSMTWB on the end of your useragent that you had added the Fast Browser Search toolbar extension.

• Where can I find my new hp laptop laptop system software and recovery to open their Web site?

  Where can I find my new hp laptop laptop system software and recovery to open their Web site?

  1. I have install the hp bios system update and failed.

  2. the beginning of HP ENVY 17 laptop u011nr - displays the message "something wrong."

  3. then I do the restore point.

  4. once I did this, the PC can not correctly run windows 10. Has lost nearly 50% function.

  5 then, I run the recovery.

  6 the result is OP deaths.

  I invited, I need to reinstall all windows of the OP and all equipment control software.

  Where can I find my new hp laptop laptop system software and recovery to open their Web site?

  Hello

  Please use the last item on the following link:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-notebook-PC-series/10862141/model/11992079

  or

  http://support.HP.com/us-en/mediaorder/HP-envy-17-u000-notebook-PC/10862141/model/11992079/softwareitem/900074-003/STEP1?SKU=W2K87UA

  Kind regards.

• Failed to uninstall Rescue and Recovery version 4.3

  Hello

  I'm trying to install Windows 10 on my Lenovo T510 laptop running System 7.  The Setup program indicates that the software Lenovo Rescue and recovery 4.3 as not compatible with Windows 10.  Accordingly, I am prompted to uninstall this program.

  When you try to uninstall this program, I get the error message.  Error 1316.  The specified account already exists.

  That - what it means and how do I remove it so I can complete uninstallation of the software?

  Thank you

  T

  I have updated the Rescue and Recovery program to the latest version.  She made an attempt to "update" of the old version, but in the end, I got two installed versions.  That said, I was then able to "Uninstall" the old version 4.3.

  Shortly after I had a transparent update for MS Windows 10.  Everything is good on this end and my machine is running wonderfully well with the new OS...

  Thanks for the tip...

  TT

• will be failover testing with success when the network between the site of protect and recover is broken

  Hi friends,

  When the network between the site of protect and recover is broken, will be the successful test SRM failover?

  Thank you.

  Hello

  There was a theme with exactly the same question, but I'm not.

  IIRC, the answer was: it depends on storage / Some SRA. of them need connectivity.

  Michael.

• difference between the disaster site and recovery recovery management

  Hello guys,.

  can you please let me know if the disaster site and recovery recovery management are one and the same or are they different features of VI suite. do we buy these tools of recovery after disaster from a third party

  name of the vendor? If Yes, what are the best providers out there on the market

  recovery after disaster and SRM? In the meantime thanks for all who responded to this question.

  see you soon

  SRM is a tool to manage a recovery after disaster. There is not such a product called DR, but you can develop a strategy of DR to have your work with or without SRM environment.

  Dr., you need SAN based replication (or tool making it). SAN vendors have solutions that can be integrated with SRM or simply be part pof your particular strategy of DR.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• Question of shared recovery Site

  Here's my scenario.  I need to test VMware View and SRM.  I plan to use scripts provided by EMC to help with view and SRM because the view was not really made to be able to test in a DR scenario.

  I have two vCenters in a production data center.  One is used for my normal "servers" and is vCenter 4.1 x 64.   The other vCenter is used for VMware View host computers, I have this vCenter (called "VDI") because I use View Composer and it is not compatible with x 64 servers.

  On the site of DR, I have a vCenter.  It is currently running vCenter 4.0.  Now, I know that I can have a shared with MRS recovery site, but virtual machines can also be shared?

  For example, should I perform a test of SRM which includes a production vCenter my "Server" domain controller and also include the view virtual machines that are part of the other 'VDI' vCenter in my production?

  Thank you!

  First of all, what version of MRS. you plan to use? You mentioned the two vCenter 4.1 and 4.0. SRM 4.1 is not compatible with vCenter 4.0 and SRM 4.0.x is not compatible with vCenter 4.1 (SRM versions must be the same at all sites).

  Regarding your question, I have not implemented recovery shared functionality, but as far as I know, even in this configuration you can still pair site independently, i.e. protected satellite site SRM and SRM instance of its corresponding recoverysite instance. So I don't think that the associations for the Protection of several sites will be available to include in the unique recovery plan.

  Please correct me if I'm wrong.

  Michael