Protector suite Reg Keys

Similar Questions

• Protector Suite QL does not recognize my old fingers

  Hello users,.

  I have a problem with the Suite of Toshiba QL protective tool. I hope someone can help me. I don't know what I can do to solve this problem.

  I have indexed an important file of me with this tool (Protector Suite QL; with my fingers).
  Unfortunately I did not set a password for the reserve.

  At first my laptop does not recognize my old fingers (I registered 2).
  So I have the idea of removing all the fingers to fix this and decode my key file.

  Now I have the big problem:
  It is not just distort recorded.
  When I try to register my new distort, the laptop want the old fingers of compensation and by activating the fingers again.
  My problem is that it is not just any old fingers because it is not registered. (It was all deleted there)

  I can't put a new skew.
  I don't have a reserve password to decode my file with a password.

  I am powerless, what can I do decode my major key file?

  Can someone give me some advice please?
  I would be very grateful.

  Thank you in advance.

  Kind regards
  Marco

  Hello

  To be honest I don t use Protector Suite and I don t decrypt my files but I know you wouldn't be able to decrypt the encrypted file if your fingerprints have been deleted and you didn't set a password.

  I checked this page upek to find a solution but unfortunately I didn't find a few tips:
  http://www.UPEK.com/solutions/psql/default.asp

  But you can check it out too. Maybe you would be more successful

  Good luck

• Need to reset the Protector Suite fingerprint reader - Satellite M105-S3084

  My wife was interested in using the Protector Suite fingerprint reader that came on his Toshiba Satellite M105 S3084.
  She tried to register, but it looks like someone has already registered and need of the original candidate of fingerprint or password.

  I have extracted a confession from my teenage daughter, but he does not recognize her fingerprints, and she can not remember the password.
  She thinks about one of his friends were playing with it (it was a year ago).

  Anyway, we can reset everything, so that my wife can do it again?

  Thanks in advance.

  EK

  Hello

  Seems the same problem I have... Following error message box appread.

  <>
  Operation failed. Tempplates duplicate already exists >

  I used to use VISTA and I have registed finger the index print until yesterday. I deleted all the partition and then installed Windows 7 and installed all the drivers. I could all registry middle finger, but I was no longer able to index regisger.

  Another reason, I created a new windows profile and delete the old profile of windows. After that, I could not record not only the index, but also major as well. I guess these finger print data stored outside the windows user profile, but I can't find where it is. How I remove registerd information?

  Feature: Portage R600 PPR61E 11b

  Please adivese.
  Mabo

  Post edited by: mabo

• Satellite A100-906 Protector Suite QL has stopped working

  Hello

  I have Toshiba Satellite! 100-906 with Windows XP and experience the following problem. Earlier this week, I had a problem of Trojan and virus one of the programs that I used to solve it identified the exe of the protector suite as infected. Right there I can't remember that "protector suite ql ' does 'my safe' and deleted.

  So I don't have access to my safe. I double click on the shortcut and nothing happens.
  I have precious files there and in no way want to lose them.

  What can I do? If I managed to find the exe file somewhere it'll work?

  I appreciate all the help which will lead not to my loss of files in my trunk.

  Thanx

  Hi mate

  Satellite A100-906 belongs to the PSAA9E series.
  You can find the drivers and Protector Suite QL software on the European driver Toshiba page.
  There is a fingerprint software 5.4.0 - listed 2934

  Download and install it.

• Portege M400 - how to remove the Protector Suite fingerprint data

  Hi all

  (1) Protector Suite 5.4 sometimes generated a crash of Windows XP on my Portege M400.

  (2) I followed the suggestion of WinXP and upgraded to version 5.8. Unfortunately, this way I lost the automatic access features to Web sites protected by (the online help 5.8 says that this module is optional, but I have not found how to install it).

  (3) so I uninstalled the 5.8 and put again on the 5.4.

  (4) in the event of a disaster.

  (5) it is clear that the fingerprint data, updated to 5.8 format, are still somewhere in the system. Uninstalling Protector Suite's not destroy them. For this reason the 5.4 original does not do something, because in its user opinion data are corrupted. First of all, I can't remove/change data user from inside the program.

  So, please, let me know where these data of fingerprints damned are so I'll be able to remove and Protector Suite from scratch.

  Thanks in advance.
  PEI

  Hello

  I think there must be a folder or files storing fingerprints
  But I m not sure where it is placed

  However, as far as I know, you can use ONLY PS to enrol fingerprints.
  Have a look here:
  http://img22.imageshack.us/i/protectorsuite.gif/

  There is an option that can cancel the stored fingerprints.

  If uninstalling the software didn't help then use and clean the BONES and using a tool, for example, the registry CCLeaner.
  It deletes all files and data on the HARD drive (in the registry) which have not been removed by Windows.

  Welcome them

• Tecra M5: Questions of Protector Suite

  Hello:

  I installed my protector following the version 5.4.0.
  It was working perfectly before the upgrade. I'm running a Tecra M5 with XP.
  Now when I sign on an application with it, the first field is filled just in all areas in demand no matter what I choose.

  For example, if the first field of the sign on is a "bob" name and the second is the password and then address, the protector suite will bob in all areas.
  When I look in the registered applications, all the fields seem to correct it.

  Someone had this problem as well?

  Thanks in advance

  Hello

  Have you tried to reinstall the software?
  Maybe there will be something wrong during the update procedure.
  I recommend reinstall the software and then check again

  You said that this problem happened after the update.
  I guess the update has not been installed correctly or the update files contains a few bugs

  PS: It might be interesting for you if you want to know something more about this software
  http://support.gateway.com/s/mobile/gateway/450RGH/PSQLDatasheet.PDF

• How can I get "Protector Suite QL" on the Satellite X 200

  Hello

  Can someone please tell me how can I recover the software "Protector Suite QL' for my X 200 series lappy?
  I can't use the recovery CD because it is with vista home premium and I recently did a clean install of vista ultimate.

  I installed the finger printing software, but 'Protector Suite QL' couldn't find anywhere.
  Can someone please give me information if it is possible to get the recovery without OS cd? I mean, what with the bundled software.

  Thanks in advance

  Concerning
  Suraj

  The Protector Suite QL software has been bundled with the Toshiba laptop and found only in the image of Toshiba. If you want to use, you will need to retrieve the X 200 with the Toshiba CD.
  There's no other way to install this software because the program cannot be extracted from image on the other way.

• Tecra A8 - Protector Suite QL and Firefox 2.0

  Since I upgraded my Firefox to version 2.0, protector suite no longer recognizes the web pages I visit such registered. Is there an update for Protector Suite QL?

  Background: Tecra A8 with fingerprint reader

  Hello

  I m not 100% sure, but I think that at this moment, the software works only mind IE.
  I studied a bit in knowledge Toshiba Web site and found a document on the relocation of the software to authenticate fingerprints for UPEK (ProtectorSuite QL 5.4.0)
  http://support.toshiba-tro.de/KB0/TSB6701I80004R01.htm

  The chances are very low that the relocation will help, but you know; try is free and if you want, you can test it.

• Protector Suite suddenly with German messages on Tecra S5

  Hello

  My Tecra S5 does not have same German air smelt, but when you change another user account, the software of fingerprint (Protector Suite 5.6.0) suddenly talk to me in German. All messages are in German, the Internet Explorer help page in German, and I have no idea why.

  Can I put this somewhere? Why Microsoft suddenly decides that I need to speak German?

  Thanks for any help.

  Puzzled AndyB

  PS: as I worked for a German company in the past, I installed the German for Office 2007 language pack so that I can spell check German docs, but that's all. This help or point in the wrong direction?

  Have you tried to delete this German language pack?

• Protector suite QL for Tecra S5, version 5.8.2

  Hello

  does anyone know where to download PROTECTOR SUITE QL 5.8.2?
  Latest on Toshiba Support and download is 5.4.0.

  Thanx

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=129726#129726

• Tecra M5 - where find Protector Suite QL for resettlement

  Hello

  I had to uninstall protector suite software QL on my Tecra M5 (Xp Pro Sp3) because that I kept getting error messages
  + Impossible to open my box and my drive of course core was not installed.

  I tried a re - install via Add programs, but it made no difference so I uninstalled the problem and he went

  Now, I want to ry again to make it work but may not know where to reinstall

  Can anyone help?
  Thank you

  Hello

  This software, you will find in the software of fingerprint.

  http://Support1.toshiba-tro.de/Tedd-files2/0/FP-SW-20070904114934.zip

  I hope this will help you

  CU

• And fingerprint reader UPEK Protector Suite problems

  I have a laptop of VGZ-Z590 series. I tried to update my program Protector Suite and driver to support a newer version of Firefox. After several hours of frustration, I lost all the features of the fingerprint reader. Nothing of what I'm doing, including roll using the system restore works.

  I downloaded the drivers for Win7 and good program from the eSupport site. When I install it, it seems to have completed since I get the message "Completed" in the program. After I finished, I get a Windows error install saying it didn't install properly!

  Someone had a little luck upgrading the Z Series notebook to the latest version of the drivers UPEK and Protector Suite software? Are there special methods or tricks I have to respect?

  Please, any help would be greatly appreciated.

  go to in 1122 Sony USB
  Friday, January 7, 2011 16:50

  Forum: VAIO Care & VAIO Update
  Topic: Error the VAIO's biometric fingerprint reader USB

• Convert the virtual registry in file REG keys

  Hello guys

  Someone at - it a script that converts files registry keys:

  • HKEY_CURRENT_USER.txt
    
  • HKEY_LOCAL_MACHINE.txt
    
  • HKEY_USERS.txt
    

  In REG files?

  Otherwise I'll create an and distribute it under the terms of the EULA

  Hello

  direct conversion in reg format is not possible

  It can be done in 2 steps:

  First

  Creation of 1. TVR file in the project directory

  Second

  Conversion file .tvr output.reg

  Code:

  vregtool [path as tvr 1. is registered to] \1.tvr ImportDir [ProjectDir]

  vregtool [1.tvr]\1.tvr ExportReg [path to output.reg]\Output.reg path

  If you deal with this message:

  Lack the CapturedUsingVersion parameter in the [BuildOptions] section required for...
  \Output.reg\Package.ini
  Set CapturedUsingVersion = 3.X or CapturedUsingVersion = 4.X
  match the version of ThinApp/Thinstall used to initially capture the package

  It's a bug of vmthinapp 4.7.0

  use later versions such as 4.7.2

• Suite Adobe - key

  Hello

  I have a suite adobe since 2010.

  I installed it on my 2 computers. The United Nations is broken and the second a hard drive son that dropped.

  I want to install this suite on my new computer but I lost the key. I have all the same serial number, my online account and the installation CD. How can I do?

  Thanks for your help.

  Contact adobe support, http://www.adobe.com/support/chat/ivrchat.html

• WIN XP PRO DELETED MATERIAL REG KEYS

  Windows XP Pro, had a virus there, for some reason, thought months a lot of cdrom, redbook and a few others who was also with the cdrom "in my head" was.i virus deleted some entire channels, added a few new values, renamed a few keys. everything is good, but the DVD-ROM. XP will see it, but it's not what the power so never thr dvd rom.  I get the dvd rom back ill be happy, since I can clean install HELP PLEASE

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Restore the computer to an earlier date and check if it helps:

  http://support.Microsoft.com/kb/306084

  Method 2:

  If the system works properly after restoring the system, then try to scan antivirus Online currently running on the computer and check:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  It will be useful.