Proxy-multicam bug?

Similar Questions

• MultiCam workflow behavior bug (first Pro 2014 CC)

  What is the best workflow for MultiCam with 2 or more different devices (different color, gamma, etc.)?

  I used the nesting to create a track by camera - then color adjust and then create a nesting of different tracks.

  But then you have to select and copy each segment of the nested together ways to get each multitrack clip and put it in a bin.

  If I adjust the color on a track after split - is there any ripple or I have to repeat the steps above?

  I also note that it's bugged - several times when I select the camera was when I at the beginning of the sequence - many selections have been reversed with inversion again during transitions of clip - resulting on the exact opposite of what I selected or random changes. The slopes of blocking does not prevent this. It seems to be the substitute of my choices based on program logic!

  Thank you

  M.

  1. create a sequence corresponding to the profile for your film.

  2. add media, a camera by track.

  3. manually synchronize clips.

  4. create a second sequence corresponding to the profile for your support.

  5. the first sequence in the second nest.

  5. right click on the nested clip, select multicamera > activate.

  6 change if necessary.

  7. which edition is complete, return to the origin and CC sequence and classification of work on the original clips.

• MultiCam editing bug: unwanted changing cameras

  The bug is a little complicated to explain (though I'm German), then try a litlle way dump:

  1. change a sequence multicam with three cameras (see media below), none of the problems

  2. stop playback to repeat something

  3. for republication go a little in time, restart the playback (the current "example-camera 1" is marked yellow in the multicam view) and set a new point editing (the chosen new "example-camera 2" turns on and is marked in red in the multicamview, as usual)

  4. stop reading, go to the new edit point and determin the camera prior to this mount point, which was "camera 1" has also changed in "example 2" camera ".

  FIRST 2014.2 CC

  SYSTEM: so far, with the gpu acceleration is turned off.

  MEDIA: XDCAM50 422, XDCAM EX 1080 p, 1080 p AVCHD

  EFFECTS: no effect, some adjusted the audio levels

  Thanks for the tips!

  IT IS THE RIGHT ANSWER:

  The problem is not related to my gpu uncertified (as written above) but is actually a rare configuration error. The problem appears only when I use my Zoom H6 as my Audiodevice!

• Bug in Premiere Pro CC Multicam?

  So, I'm a bad question in one of my sections blocking. I use Cloud applications creative on Mac OS X Lion mountain.

  I have 5 or 6 separate blocking sequences and the problem occurs on one of them, which makes me think it must be a problem. What happens is I cut the sequence and choose my angles. However, whenever I visited or revive the project or send Media Encoder, I get something that is hard to describe. It seems that for some of the angles, he fires at the beginning of the clip (where I scored a point in). The CAP of screen below, it seems to get these arrows to indicate which clips are from the species of the multicam sequence and not the time where I went from the angels. I've fixed 3 times and always without success. Well, it seems indeed as it works, but then I try to encode and Media Encoder does the same thing. Very strange.

  This occurrence happened to someone else? Is there a solution?

  

  See the link posted by Jim for more details. We are working to release a fix as soon as POSSIBLE. We apologize for any inconvenience.

  Peter Garaway

  Adobe

  Premiere Pro

• Bug in dynamic link on Multicam?

  I have changed a few sequences using multicam in the usual way, i.e. create a sequence, incorporate into another sequence, turn on multicam etc.

  I copied then the change in the result of another sequence (not shipped, just copied) to deposit in a program assembled.  I am now trying to stabilize some shots, but I encountered a problem.

  The sequence goes as follows:

  [Excerpt 2] [Excerpt 1] [Clip 2 *] [Excerpt 1]

  The clip, I'm trying to stabilize is Clip 2 * (the third one above).   When I click straight and say to replace it with a model of effects after (if I can use stabilizer Warp) launching After Effects, it puts 1 Clip (the part of the Clip 1 who reported to the chosen Clip 2 in the multicam) in damage and not the clip 2.

  How can I get 2 Clip After Effects as a model?

  To clarify, it was the source multicam tracks

  [Excerpt 2] [ Clip 2 ] [Clip 2 *] [ Clip 2 ]

  [ Clip 1 ] [Excerpt 1] [ Clip 1 * ] [Excerpt 1]

  So there [Clip 1 *] who's going after effects and not [Clip 2 *].

  What I am doing wrong?

  [Mac 10.6.7, CS5.5]

  Hi ExactImage

  When you replace your multicam with AE composition Dinamic link clip, AE brings your sequence as nested.

  And how it should organize layers in this model? Right, the same way they are in your nested in PrPro sequence: upper layers in AE model refer to the superior camera in the nested sequence, the lower ones refer to the camera below. Therefore, you must bring your point of view is just to disable the eyeballs in unnecessary layers within this model of EI:

  

• macOS Sierra Siri behind corporate proxy

  When using wired Ethernet to work, I network settings configured to use Automatic Proxy detection.  All my other network services (Messages, Mail, Safari, etc.) work fine, but systematically reported Siri, "sorry, I'm having problems with the connection.  Please try again in a moment. »

  Out of the corporate network, Siri works.

  Is this a bug with Siri?  Y at - it a configuration option, I can use?  I have no control over the parameters of the corporate proxy.

  Thank you!

  In my company, they told us that it is because of the port used by Siri, which is not supported / opened by our representative.

  -Leif

• Disabled but MultiCam clip the original always support here

  I am almost at the end of a long project and all my blocking clips are red with the warning triangle.  The original media, where the multicam clip is composed of, is still there and accessible if this isn't a case of media missing or not coupled. In this case if I am posting in original mode of listening or proxy.  There are two other library projects which are being edited in exactly in the same way, but they all work perfectly.  My only saving grace is that the library works fine on my laptop so I can power through the project on my MBP, but I want to understand the problem when it happens in the future.  Is there a way to 'fix' the multicam clip so that it can be updated without having to replace the old with the new?  It's a pain.  Sorry if this has been covered in another thread, but I was unable to find one.

  My library is on an external drive and I ran the first care about it.

  Strange.

  Any advice would be appreciated.

  WWhat do see when you open the multicam clip in the multicam Editor?

• Why Firefox 18 behind a proxy server refuses all connections https?

  I used to have Firefox 17 and everything worked ok but I just installed Firefox 18 in my environment of Windows XP sp3 and I can't connect to https through proxy of the company sites.
  Company proxy requires LM/NTLM authentication, the proxy server is a machine IPCOP (squid proxy.)
  After the update to Firefox 18, for all sites that uses an https connection, the answer is:
  The proxy server refuses connections

                Firefox is configured to use a proxy server that is refusing connections.
   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Squid log shows lines with connection refused because of required authentication (domain/username and password) settings
  1357912572.640 1 (my IP) TCP_DENIED/407 1586 CONNECT www.orange.ro:443 - NONE/text/html
  As you can see no domain/username were filled in the newspaper.
  Here is a line with authorization from another browser
  1357920874.657 1348 (my IP) TCP_MISS/200 2549 CONNECT www.orange.ro:443 (mydomain\myusername) DIRECT/109.166.184.137-
  I changed the sensitive data

  Thank you

  I see a lot of proxy problems reported by users of Firefox 18. If you're not the only one with this problem.

  For now, I advise you to go back to Firefox 17.0.1 until Mozilla fixes this bug.

  Link:
  
  http://www.Mozilla.org/en-us/products/download.html?product=Firefox-17.0.1 & OS = Win & lang = en-US
  
  http://www.Mozilla.org/en-us/products/download.html?product=Firefox-17.0.1 & os = OSX & lang = en-US

• Unable to access SSL Web site when company proxy use man-in-the-middle attack to scan SSL traffic

  Our company uses a proxy server that analyzes the SSL traffic on web sites. This is done via man-in-the-middle attack. The proxy generates a new certificate on the fly that it sends to the client, impersonate a secure server.
  After upgrading from Firefox 10.0, I always get error:
  Error HTTP Status: 400 Bad Request
  After the confirmation of a security exception.

  Maybe this is related to the difficulties of the attack of the BEAST bug (browser exploit against SSL/TLS)

  • bug 702111 - intolerant servers to record split of 1: n-1. "The connection was reset" (see also the comment 60)

• Bug in xml component audio with blocking clips

  I have a timeline / project with a 30 min show that consists of a multicam clip 5 angle edited. Most of the fixtures is the audio components for each of these angles.

  I am audio editing by creating a selection on the audio components and this area the deactivation or removal of the area.

  See image here:

  

  Once a show is published, we export the project to Kollaborate and create a xml, we can have it interact with marker Import, part of the suite of applications Kollaborate.

  Import marker allows us to marry the notes taken to our edition in Kollaborate with making markers in FCPX projects via xml. Pretty darn cool!

  Alas, nothing is perfect.

  After importing the new xml to import marker project code, I noticed the following problems:

  • all audio components are disabled
  • even if these audio components are now disabled, we can still hear the audio?
  • changes in audio components are gone now

  

  It is not import marker the cause. I did a test where I just exported a FCPX xml project and then he returned in FCPX. This causes the same bug described above. So I eliminated marker import as the culprit.

  I traced the bug for xml FCPX not to honor audio changes audio components to turn off areas using a selection.

  If I do the same audio changes by region, I would like to 'turn off' by disabling components in the blade area or simply by adjusting the volume in-line skating, xml FCPX pays tribute to these types of changes.

  I also have this reduced to just blocking clips, clips ordinary to keep his changes to the audio device.

  Can anyone else confirm this as a bug?

  Yes.

  Please post a feedback report. Can include a link to this topic.

• MultiCam insert/connection fails

  Hi all

  I use final cut 10.2.2 on an iMac end 15 5 k of the retina. I have a project that uses two files blocking (2 different representations of the same theatrical event, I need to change between them for better/worse performance, etc.). This is a brand new machine and the first project that I am editing on it.

  I already have an instance of two blocking files in my project file, one as the main plot and a bound in a top storyline. I try to set in and out points on the 2nd multicam and insert at a different point, but when I click on Insert (or sign in or after), I get a reel of death for about 15 seconds and the operation fails (nothing is added to the project timeline).

  The problem persists in other project files: I can place these files blocking is no longer. I deleted and re-uploaded and installed the final assembly and not luck. Should I try to trash my preferences?

  I'm doing something wrong? Or ideas on how to solve this problem? Thank you very much

  Ben

  What players do you use for your media? You have used the default create media optimized for multicam? Do not. Create a proxy support. Try the proxy work mode.

• HTTPS bug?

  I use HTTPS via WiFi on a 8900, do a GET around 3000 bytes.  Sometimes when the data hits the last part so phone data are binary zeros rather than what it should be.

  The HTTP response is divided on several IP packets.  The zeros start a package limit.  I have a trace of thread of the HTTP showing packages fine.   There is a proxy reversed providing SSL between the wire trace and phone, so its either that or the phone that is the source of the problem.  The proxy is Apache.

  Someone saw something like that?

  Phil.

  Ah, I think it's just a bug in my code I do not call repeatedly read (buffer, offset, len) if I don't have all the data.  Funny how this kind if thing comes to me _immediately_ after I have a question and not within hours of anguish and thinking beforehand.

  Phil

• With the help of my signature via a proxy server does not terminate but not from RIM

  I now use the signature Server successfully to sign sensitive data on the device

  associated with our application.

  However, when trying to sign full RIM signatures through a proxy server, and my

  Server deals in reality as well and even send emails of success, but the signing tool

  does not receive a final acknowledgement that he search and eventually times out.

  I noticed for RIM signatures that we are hitting servlets, while the default configuration value for our

  signature server is used.

  Is there something we need to do for our server works correctly when it is connected through the proxy?

  NOTE: everything works fine when the server is on the same network as the GIS tool.

  Thank you

  Mark

  It turns out that it's the server signature RIM as I expected.  It does not return the appropriate response headers.

  The server does only return HTTP/1.1 200 OKCRLF and then the payload.  We discovered

  If we put an Apache proxy before the server signature and after our proxy

  that it will accommodate the non-standard answer and mark the headers with a stored block transfer

  coding and then all is good.

  So the reason why the public signature RIM servers work through the proxy must be either because the bug

  This server is fixed or a proxy because Apache-like sitting in front of the signature server.

  I hope that this will save others some grief in the future.

  concerning

• DMP-Invalid RSS url to 5.2 (Bug discovered?)

  Hi all

  We met following behaviors.

  We sent a presentation with an invalid url to the DPM, and since we were not able to control it through DMM.

  The dmp did not meet orders sent through DMM (presentations/system tasks)

  The only option to bring it back is again through his site web gui.

  Is this a known bug?

  It is a known problem.

   Check out: ---------- CSCte67952 - DMD:  RSS will not work after upgrade to 5.2 Symptom: -------- The RSS ticker is not showing some content after upgrading to 5.2. This is because DMD in version 5.2 uses Flash to display the RSS ticker.  And the Flash 9 and 10 player has built in security to not allow content from another domain. This security feature is blocking the content. Workaround: ----------- There are several options available: 1: Only use RSS feeds from sites that allow cross site scripting. 2: Use a service line "Yahoo Pipes" service that acts as a proxy. This    will result in a a new URL that can be used in the DMD, bypassing    any cross-site scripting.   Additional Note: ---------------- If you use the standard RSS feed in the Signage Design tool, it will work with any RSS feed you have and you don't need a crossdomain policy file. Cross Domain refers only to Adobe Flash Player and the ability to read content from other domains. Its a security issue As an example: If your SWF file is hosted on www.cisco.com/flash/myflash.swf And that SWF want to read any content (xml, rss, etc..) from rss.cisco.com/myrss/xml That is allowed If that same SWF file tries to access data on www.google.com/somedata.xml That would require a crossdomain.xml at cisco.com/crossdomain.xml that lists google.com This allows the Flash player to access content at google.com http://kb2.adobe.com/cps/142/tn_14213.html#policy

  If this answers your question, Please take time to mark this discussion answered & rate the response.  Thank You! T.

• Problem of proxy with AnyConnect SBL

  Hello

  Recently, I added the following line to our profile of .xml AnyConnect:

  IgnoreProxy

  We use a server proxy internally in our network, so when client computers have been set up for this, they could not connect to our ASA with AnyConnect when they were out of the site. The above setting in their corrected profile that, even if the proxy is enabled in their IE, they could connect with AnyConnect roaming. So far so good.

  Yesterday, I added the following to our configuration:

  TEST group policy attributes

  use a MSIE-proxy-server method

  Internet Explorer-proxy server value ip.ip.ip.ip:port

  activate Internet Explorer-proxy local-bypass

  This configuration was to ensure that the proxy of the user is enabled when connected to the VPN. According to doc Cisco proxy on the client settings automatically return to its original settings when disconnecting. This also works as expected.

  But then, here is the funny thing (which is not funny at all really):

  When to start the client computer and start-up of the AnyConnect client before logon Windows (SBL), I get the prompt attached when trying to connect! This only happens with SBL – not when the user connects and then starts the VPN client. I tried with different proxy user auth I know work, but I can't get through and therefor unable to connect before Windows logon. According to the doc of Cisco, the proxy settings should apply logon AFTER VPN - but it seems he's trying to use them BEFORE trying to connect when you use NFP.

  No one knows why this happens? And anyone can come up with a solution (except disable proxy settings just made)?

  Thanks in advance - much appreciated!

  / Rasmus

  Rasmus,

  Bad news... I checked the "fixed in" field in bugs.

  002.005 (1002) and 002.005 (2000)

  which means - it will be corrected in the new version.

  Symptom:
  
  The "IgnoreProxy" setting in the AnyConnect XML profile is not functioning when Start Before Login (SBL) is also enabled.
  
  Conditions:
  
  Problem first observed on AnyConnect 2.4.1012 when "IgnoreProxy" is set in the xml profile. Using Start Before Login feature (SBL). Using GPOs to set the proxy before login. Most noticable when the Proxy that is set is internal/private because the AnyConnect will not be able to reach the headend device to make the anyconnect connection due to the proxy being set. Confirmed the profile is active. The "IgnoreProxy" setting in the profile is working for a non-SBL connection.
  Workaround:
  
  1. This does work without SBL. For instance If you cancel SBL, logon to windows in the usual way and then start the Anyconnect client. If you then disconnect and reconnect the AnyConnect it does indeed ignore the configured proxy.
  
  2. Disable GPO settings that push the proxy before login.
  
  Note: If you are using GPO to launch scripts, be aware AnyConnect also now has a OnConnect scripting feature to launch scripts as well