proxy. XML

Similar Questions

• Change proxy.xml disconnect host of VC

  I have a requirement to lock our ESXi hosts based on vSphere hardening guides. One in particular is to disable the Explorer objects managed on ESXi hosts. That are in the configuration of the document Security hardening vSphere ESX/ESXi host part. Code HCM02. If I comment on this section of the file /etc/vmware/hostd/proxy.xml the host becomes disconnected from the VC and the Web interface no longer works. So what I'm doing wrong here. This is the portion of the file before I change it:

  So I'm just commenting on this section to turn it off. Once I restart the services.sh on the ESXi host is when the problems start. This can not be expected behavior is? Thanks for any help!

  In the guide to hardening of the (Rev B) project, a step was omitted this procedure.  You need decrement the <_length>field by one after the removal of the element of the "crowd".  This will be corrected in the final version.

  Please let us know if this doesn't work for you.

• Modify the web proxy server to vCenter server

  Hello

  I installed the vCenter server on a virtual machine that is present at the top an ESXi host in my vSphere environment. The operating system installed on the virtual computer is Windows Server 2008. Now, I want to change the web proxy service on the vCenter server to allow the http connection. I'm following the steps in this guide:

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=%2Fcom.VMware.perlsdk.pg.doc_50%2Fviperl_proggd_preface.2.1.html

  However, the path specified in this guide: c:\Documents and Settings\AllUsers\Application Application Data VMware VirtualCenter

  is not present in Windows Server 2008.

  And the path that contains vCenter which is C:\Program Files\VMware\infrastructure\virtualcenter Server doesnot contain any proxy.xml file that needs to be changed.

  I need help with this as to how to activate the connection http on the vcenter server.

  Thanks in advance.

  Try to paste this path into the address bar in Explorer or in the command line. This is a hidden directory.

• Default connection ports

  Hello everyone so I recently installed ESXI 6 on my proxmox server and used the ESXI embedded client host fling, which uses default authentication ports 80 and 443. My question is how I would go about changing ports Auth to something such as 8080 and 8081. The reason why I want to do it is because it is a test for Learning Lab and want to access remote web control panel. I looked Configure a VPN, but I prefer to forward a port 8080 or 8081 and access it that way. I am aware that this question has been answered before but it has been 5.0 and 5.5, which uses proxy.xml which has been deleted in what concerns or move to the 6.0 because I'm not. If this has been answered elsewhere I apologize.

  Hello

  You may need to modify /etc/vmware/rhttpproxy/config.xml file in 6.0 (as per article VSphere 6.0 Documentation Centrepubs)

  There is also an exchange of views about this in Re: Proxy.xml that allows us to modify to enable HTTP for vSphere SDK is not found in ESX server 5.1

  Thank you

  Muruli

• vCenter Server 5.5 cannot start after a server failure

  Hello

  After power outage my vCenter does not, when I check the ODBC connectivity that works very well and thanks to the Internet I can get all the menu but it does not show inventory or data.

  I use the physical server to vCenter. could you please help me on this.

  When I check services, vcenter server is not started and is in the automatic delay start, I tried to start, but it's getting error

  Hi, I had a solution, the file corrupted, entry proxy.xml appear with different IDS for the SDK entry in proxy.xml

• vSphere ESX 4.1 changing default ports 80 and 443?

  Hiya,

  I have problems trying to change ports by default so that I can spend my server in VM.

  I tried what he said on the forums here, but I can't work. VMware KB 1021199 article

  The proxy.xml has about 72 lines in there, but I put it upstairs, downstairs, no joy.

  The top of my proxy.xml now looks like this

  < ConfigRoot >

  < > 81 httpPort < / httpPort >

  < > 444 httpsPort < / httpsPort >

  < the rest of the file >

  < / the rest of the file >

  < / ConfigRoot >

  I have changed ports in my customer file too.<add key = "protocolports" value = "https:444;http:81" />

  All I get is unable to connect to the server.

  I also tried to add the port to the name such as 192.168.5.111:81, no joy.

  What I'm missing here?

  Any help much appreciated, taa.

  AndyB

  Welcome to the community,

  just a quick question. Why do you have ant / need to change ports on ESX host? The ESX host and the virtual machine to each use their own IP address, so there should not be any conflict of port with a virtualized Exchange Server.

  André

• Remove VMware completely when the installer fails - HOW?

  I had VMware Workstation 8 works fine on a 64-Bit machine of Windows 7.

  I bought 9 Workstation and tried to install it, and he says that he should uninstall version 8.

  Well, it failed.  Now, I can not install ANY version, version 7, 8 or 9, all versions.

  The installer is apparently unable to deal with an error to uninstall an earlier version. Why?

  [at this point, Monday, December 17, 2012, it is all fixed with VMware technical phone support. It involves several

  steps and a key was to use the utility Fixit from microsoft from here: http://support.Microsoft.com/kb/2438651/en-us

  and 1308 VMware knowledge base article http://KB.VMware.com/kb/1308 .

  Microsoft fixit scanner not found VMware, but she showed 'unknown' (or other?) and VMware

  technical support took the key to the article above of 1308

  {0D94F75A-0EA6-4951-B3AF-B145FA9E05C6} HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\

  Paste in the registry key when asked by the fixit utility

  {0D94F75A-0EA6-4951-B3AF-B145FA9E05C6}

  Who noted a mistake and fixed it.

  My options are:

  1 reinstall the Windows operating system and start from scratch (which will take a few days to catch up with installed programs).

  NOTE: DON'T DO THIS WITH THE SUPPORT OF VMWARE

  2. remove all vestiges of the previous installations of VMware so I can install without being told that the installer has found another version.

  NOTE: THIS WAS DONE BY THE TECHNOLOGY WITH THE HELP OF THEIR CONTROL PROGRAM REMOTE

  ------------------------------------------------------------------------------

  They have the option "/ clean" on the installer, which does not work, but it must do what he pretended to do so, remove all previous keys and elements.

  What a VMware solution that fixed what well Setup obviously cannot fix. It should prepare my computer so it will NOT report versions of VMware if I can install two versions 7, 8, or 9.

  -------------------------------------------------------------------------------------------

  With the help of VMware support, they were able to completely remove VMware and install VMware 9. I'm going to

  to try to writeup that they did, but the solution took about 30 minutes and many find and remove the

  Directories of VMware.

  I now have version 9 installed and it works fine.

  Post edited by: jeff92677 - TO EXPLAIN THAT THE PROBLEM IS SOLVED, AND THANKS to VMWARE for THE SOLUTION

  This feature was introduced in WS 7.
  Since then WS installers often think that older versions is present - and this happens even on systems that has never ever been before WS.

  On the issue of the port... This is normal. Most of the time it does not configure the port correctly during a first installation.
  You have installed Skype? -Make sure that remove you it temporarily.
  Then stop vmware - pass manually - change the
  C:\Documents and Settings\All Users\Application Data\VMware\hostd\proxy.xml
  -use an equivalent path for win7 of course - so that it uses the port you want.

  445

  Then restart vmware - pass and it works hopefully

• Impossible to upgrade to Acrobat DC

  Submitted, receive the following log of errors once it gets to about 42% download. Using a Mac running 10.10.2 if that's any use. Appreciate the help.

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DW013...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 6 (s)

  ERROR: Failed to initialize - BEGIN - START-

  ERROR: Fatal error initializing the proxy files.

  ERROR: The following proxy files can not be loaded

  ERROR: /tmp/543160ED-48AD-4918-9AC4-7B02DDEE9DE6/proxy.xml

  ERROR: - END - initialization failed - END.

  ERROR: DW013: failed to initialize session payload

  -------------------------------------------------------------------------------------

  You can get it here: ProDesignTools: Adobe® Developments in Focus

  Sign in if you have a subscription to the CC.

• Error Code DW013 - cannot upgrade to Acrobat DC

  Whenever I try to upgrade to Acrobat DC I get the following error code:

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DW013...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 6 (s)

  ERROR: Failed to initialize - BEGIN - START-

  ERROR: Fatal error initializing the proxy files.

  ERROR: The following proxy files can not be loaded

  ERROR: /tmp/F9DE08CD-4CDC-4D43-B9C5-165EF185FD1F/proxy.xml

  ERROR: - END - initialization failed - END.

  ERROR: DW013: failed to initialize session payload

  -------------------------------------------------------------------------------------

  Any ideas?

  Hello

  Could you please try again after restarting the system. This should be fixed now.

  If this issue is not resolve even after reboot then please share the following details:

  1 operating system information.

  2. you have any earlier version of Acrobat is installed?

  3 part PDApp.log ~/Library/Logs file, install Acrobat records (Error.log to install Adobe and Adobe Acrobat DC 15.007.20033 . log.gz) / Library/Logs/Adobe/Installers and install.log in/var/log.

  Thank you

  Tushark

• Exit code: 7 please see specific errors below for troubleshooting. For example, ERROR: DW013... - Summary - 0 fatal Error 6 error (s): - START -.

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DW013...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 6 (s)

  ERROR: Failed to initialize - BEGIN - START-

  ERROR: Fatal error initializing the proxy files.

  ERROR: The following proxy files can not be loaded

  ERROR: /tmp/AB24A935-0FB4-4D57-A6C8-73C0BF15A96E/proxy.xml

  ERROR: - END - initialization failed - END.

  ERROR: DW013: failed to initialize session payload

  -------------------------------------------------------------------------------------

  CS5, cs5.5: https://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  Lightroom: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html

  Photoshop elements 13: https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-installation-errors-exit-codes-6-7.html

  elements of first: http://helpx.adobe.com/premiere-elements/kb/updated-installation-instructions-premiere-ele ments.html

• Issue after changing the port used by the VSphere Client - ESXi 5

  Being an ESXi 4 guy, I changed the default ports in the proxy.xml file as indicated: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1021199 as I always do. However, this time I did in ESXi 5, before reading the note: ' "for vSphere 5.0, if the proxy ports are changed, the new ports are not allowed through the firewall ESXi.".

  I restarted the management agents and now of course, I can't seem to connent on the host ESXi 5 via any port, and I can't connect to disable the firewall using esxcli. Today what is the workaround?

  Thanks in advance.

  You can access the physical console and go to DCUI and undo your changes... If you made a backup file of the xml file before you make changes, it should be as simple as copy back the original file.

• Impossible to download files using ALIVE

  I try to get familure with VIVID...  Per VMware I am trying to follow the instructions http://pubs.vmware.com/vsphere-4-esxi-installable-vcenter/index.jsp?topic=/com.vmware.vsphere.esxi_server_config.doc_41/esx_server_config/authentication_and_user_management/t_configure_ssl_timeouts.html

  using Windows RCLI for vmware

  I can download fine, but every time I have download I get the file cannot be downloaded on "."  (see below)

  Can someone direct me as to what I'm doing wrong, because I think that I am following the directions.

  I went in the windows temp directory and verified that files are downloaded.

  C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin > vifs.pl - Server server.lab.com - get /hostd/proxy.xml c:\temp\proxy.xml

  Enter the user name: root

  Enter the password:

  Downloaded file c:\temp\proxy.xml successfully.

  C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin > vifs.pl - Server server.lab.com - put c:\temp\proxy.xml /hostd/proxy.xml

  Enter the user name: root

  Enter the password:

  Error: File c:\temp\proxy.xml cannot be uploaded to.

  C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin >

  You have a typo in the command that you have posted.  It must be/host/proxy.xml.

  Dave
  VMware communities user moderator

  ESXi Essentials free training / eBook offer

  Now available - VMware ESXi: planning, implementation, and security

  Also available - vSphere Quick Start Guide

• ESXi, yoann data resides on a boot?

  Hello

  Anyone who has an overview of the data that resides on an ESXi 'cos' on a reboot?  It is possible that all the vm or LUN data stored?

  /gekken

  Any file under/etc that has the sticky bit is automatically saved every hour via an internal cron which is called from /sbin/auto-backup.sh

  Here are the files on a host example ESXi 4.1:

  ~ # find /etc -follow -type f -name ".#*" | sed 's/\.#\(.*\)/\1/g'
  /etc/dropbear/dropbear_dss_host_key
  /etc/dropbear/dropbear_rsa_host_key
  /etc/likewise/db/lsass-adcache.filedb
  /etc/likewise/db/lsass-adstate.filedb
  /etc/likewise/db/netlogon-cache.filedb
  /etc/likewise/db/pstore.filedb
  /etc/likewise/krb5-affinity.conf
  /etc/pam.d/system-auth-generic
  /etc/security/access.conf
  /etc/vmware/hostd/authorization.xml
  /etc/vmware/hostd/hostsvc.xml
  /etc/vmware/hostd/pools.xml
  /etc/vmware/hostd/vmAutoStart.xml
  /etc/vmware/hostd/vmInventory.xml
  /etc/vmware/hostd/proxy.xml
  /etc/vmware/ssl/rui.crt
  /etc/vmware/ssl/rui.key
  /etc/vmware/vmwauth/authentication.conf
  /etc/vmware/config
  /etc/vmware/dvsdata.db
  /etc/vmware/esx.conf
  /etc/vmware/license.cfg
  /etc/vmware/locker.conf
  /etc/vmware/snmp.xml
  /etc/vmware/vmware.lic
  /etc/group
  /etc/hosts
  /etc/inetd.conf
  /etc/chkconfig.db
  /etc/nsswitch.conf
  /etc/ntp.conf
  /etc/passwd
  /etc/random-seed
  /etc/resolv.conf
  /etc/syslog.conf
  /etc/dhclient-vmk0.leases
  /etc/krb5.conf
  /etc/krb5.keytab
  /etc/shadow
  /etc/sfcb/repository/root/interop/cim_indicationhandlercimxml.idx
  /etc/sfcb/repository/root/interop/cim_indicationfilter.idx
  /etc/sfcb/repository/root/interop/cim_indicationsubscription.idx
  /etc/sfcb/repository/root/interop/cim_listenerdestinationcimxml.idx
  

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• can I do a custom install of cs5?

  Hello

  can I do a custom install of cs5?

  I know it's easy with cs4 and cs3, for example for cs4 is easy, just edit the fileAdobeBridge3All.proxy.xml and AdobePhotoshop11-Core.proxy.xml to make a full custom install

  someone how to do with cs5?

  I'd love to do it

  a PM must also be great

  have a nice day

  I, like you, Mantralightroom, prefer to run a tight ship / have full control on what is installed / located on my pc. Unfortunately the mounting of two (or three if on x 64) files you mentioned doesn't seem to work. So I treated the as I treat Adobe Air, which, even if you say "do not install" always installs.

  If there is no option but to install the bridge, bridge mini and other foreign pieces ' only parts require you while they get treatment for a special haircut, i.e. of the folder of the bits said games ' only pieces, hit the magic button with "Delete", written on it.

  No problem what so ever report so far. Work like CS4 where I could force do not to install.

  I Mystic Thumbs for psd files and ST Thumbnail Explorer for files have to display in my files, same as any other type of image file, which take up a lot less than my property. I don't have Adobe Bridge to organize my image files thanks a lot. I'm a big boy now, I'll do it myself.

  End point.

  Some people like Adobe Bridge.

  Some people like Slug ' doesn't lettuce flavor of ice cream.

  I don't like.

  Elmer B. Fuddled

• No matter what xml Vs mail proxy service

  I am bit confused about the difference between any xml service and mail service with the type of request message of XML in osb proxy service config. any help pls?

  Hello

  If you use a load XML in and out, I don't see much difference...

  See here...

  http://docs.Oracle.com/CD/E28280_01/dev.1111/e15866/ui_ref.htm#i1318149

  Service - select this option to create a service that can receive messages from e-mail data, type and respond with messages of a different data type.

  Any Service XML - select this option to create an XML service that does not have an explicitly defined interface and concrete.

  See you soon,.

  Vlad