PS 7 needs "Wake-up" after Windows 10 download

Similar Questions

• Pavilion dm4-2180 U.S.: after Windows 10 download impossible to open the laptop or desktop

  Cannot open after download Windows 10. Power of seizure password. Main screen upward. No icons to access. Moved the pointer at the bottom of the screen - it modifies a turning circle. I would like to remove windows 10 and restore windows 7 is not sure on 32 bits or 64. I do not know desktop is 64

  Hello

  Please try to hit Esc first get to the logon screen and using the same password before the upgrade.

  Kind regards.

• Access user (UAC) shield appears on a large number of my programs now after Windows Update download and cause problems with some programs, no one knows how to fix this? (Windows 7) (Windows Update post a coupe of weeks)

  Hello

  Windows Update recently made a lot of downloads on my computer about two weeks ago (I run it automatically and it works usually weekly) and he has made some changes to my system that create errors or difficulties with certain programs. The shield of the UAC is now appearing on many more programs for some reason any and now I'm a guest whenever a program is available. which is also appear on my AntiVirus program. Action Center flag appears almost every day now with warnings saying that my AntiVirus program and spyware is off (not sure if this is related to the UAC shield), but when I check my AntiVirus program everything works and after access; the flag of the Action Center shows while all right. Nobody knows how to solve this problem and get rid of the ecu of the UAC on programs (or at least some of them I want to be invited on)? Any help would be greatly appreciated. Thank you

  I'm sure I've upgraded to Vista SP2, but not absolute, I can't find a lot of information in the case of the newspapers with the service pack level... only vista combined with some process is perceptible. I bought July ' 09 new and it came pre-installed with Vista on it. I think this is the tool I used to remove McAfee on this; It also came with Norton as an alternative option and both have been removed using their tools to uninstall BitDefender installation instructions walked me through the location and the removal of two of them before installing BitDefender on the computer. My user account is configured as an administrator, but when I right click on programs with the shield of the UAC on them, I'm not running as an administrator. The UAC slider is set at the 2nd ranked (by default); but I do not know how it was listed previous, I wondered about moving down one notch (but he advises not and I don't want to spoil anything).

• Frozen laptop after Windows 10 download

  I tried to load windows 10 to my laptop and it was loading forever.  I left it last night and now the computer is frozen on the password screen.  Keys and the mouse are inadmissible.  Help!

  Hi Joan,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, your computer is frozen to the login screen. First, try hard, restart the computer and see if it helps you to solve the problem.

  If the problem persists, I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start the recovery Windows (WINRE) environment . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Windows does not start after Windows updates downloading

  I have an IBM Thinkpad R32 with Windows XP, 512 MB of ram and a Pentium 4 processor. Wednesday night, when I stopped, Microsoft downloaded a bunch of updates - 13 to be exact. When I went to start my computer the next day, I got a black screen saying "We apologize for the inconvenience, but Windows did not start successfully.

  When I select 'safe mode' I get a series of files. When I select "Last known configuration" or "Start windows normally" I get a blue screen with "a thread tried to release a source he did not' and the error code that goes in the bottom" STOP: 0x000000E3 "(0X80558BE0, 0X82FCA548, 0 x 00000000, 0 x 00000002). "When I press F8 for advanced startup options, I get the same result to choose 'safe mode' as before, but also the blue screen to 'last known...". "or"start windows normally ".

  I have a recovery disk but it seems to be the 2nd of the 2 discs, and I can't find the first. More I am concerned about the loss of material on my computer (have not saved in a while). My technical skills are marginal - I'm good at copy what is on the screen but that's all.

  Needless to say, I'm a little upset with Microsoft for burning my muddy computer with its updates. I set it so that I have to approve the updates, but I wasn't paying attention when I hit the button turn off with the updates.

  shadiahm,
  Thanks for posting on the Microsoft Answers forum.  The first thing to do is to remove the external devices (printer, USB drives, USB hubs, etc.), then restart.

  If you have your XP cd, you can run a repair installation: http://support.microsoft.com/kb/315341.  If you do not have a XP CD you must contact your PC manufacturer to obtain replacement disks.

  Also, if you have access to your XP, you can start in repair mode and run SFC/scannow: http://support.microsoft.com/kb/310747 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ultra computer window 7 not sometimes wake up after hibernation

  I am running windows 7 ultra on computer dell xps QuadCore 8300 and recently my computer sometimes wake up after hibernation when I move the mouse so I have to shut down the computer using the power button can you help me.

  Go to your control panel and go to your Power Options. No matter what plan you have selected, click on "Change plan settings", then click "change advanced settings of power."

  This should open a list of options, now click on the button '+' option of sleep and
  change the "Allow hybrid sleep" to "Off".

  Just a note, you can avoid only the computer from sleep mode hybrid, means the hard disk activity will remain intact. So the next time your windows is asleep, you can always get on easily by just moving the mouse or pressing a keyboard button.

  Please see the link below. And I believe that it is a desktop computer?

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  This is because the PDF file is not be open in Acrobat or Reader, but by the browser which is unable to handle the specific PDF content.

  If you use Firefox or Chrome, follow these steps: https://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html

• Need help with windows to open after windows xp3 attempted to upgrade

  I tried just update computer husband WinXP3. When I tried to reboot, the error "procedure entry point apsSearchInterface is not found in the liabrary of dynamic links Wlanapi.dll.  I searched the area of solution for the resolution and discovered that I need to update the driver of the dlink. So I downloaded the driver file on my computer, it has burned on a CD and now I need to go into Windows in safe mode, so I can install the driver.
  My computer starts not in any fashion without failure.  How to do back in Windows so I install the new driver?
  Safe mode tries to start, but it crashes on the drivers and I have to turn off the computer and try something else.

  Help!

  Debi

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249 TaurArian [MVP] 2005-2010 - Update Services

• Pavilion a6220n: updated my BIOS after Windows 7 is already installed

  Hello.

  I bought an a6220n Pavilion in 2008 because he was very progressive.  In 2010, I updated the video card with an ATI Radeon 4770 and upgraded to 4 GB of RAM.

  Recently, I backed up all my stuff and restored the computer to factory settings.  I installed 8 GB of RAM. Then I started Windows 7-64 bits of an installation disc.

  So now Windows 7-64 bit is up and running.  I think so.  Internet seems to be very slow.   It recognizes the 8 GB of RAM and video card, video card driver, and other system drivers are up to date.

  I want to spend my CPU to a Core 2 Duo E8600 3.33 Ghz, but in order to do this, I'll probably have to update my BIOS.   But when I try to update my BIOS Installer tells me this:

  _______________________________________________________________________________________________

  Title: IPIBL - LA motherboard BIOS update
  Version: 5.13
  Description: BIOS card mother IPIBL - update improves compatibility with the memory test.
  Aim: Routine
  Category: BIOS
  
  Operating system:
  Microsoft Windows Vista Home Basic (32 bit)
  Microsoft Windows Vista Home Basic (64-bit)
  Microsoft Windows Vista Home Premium (32 bit)
  Microsoft Windows Vista Home Premium (64-bit)
  Microsoft Windows Vista Business (32 bit)
  Microsoft Windows Vista Business (64 bit)
  Microsoft Windows Vista Ultimate (32 bit)
  Microsoft Windows Vista Ultimate (64-bit)
  Microsoft Windows Vista Starter
  
  Language (s):
  Global English
  
  Improvements/corrections:
  -CPU microcode updates.
  -Reduced the Intel Quad Core CPU ACPI S3 Resume BiosInitTime.
  -Adjust the low limit speed system fan.
  -Fixed a problem with system suspended when selecting "after the failure of AC power" in the BIOS Setup Menu.
  -Improves compatibility with the memory test.
  
  Prerequisites:
  -You must be logged in as an administrator to install this update.
  -You must have a Microsoft Windows Vista operating system.
  -You must have a motherboard IPIBL - LA.

  _______________________________________________________________________________________________

  While this means?  I need to restore to Windows Vista, upgrade the BIOS and then install on Windows 7?

  Or is the BIOS of Windows 7-compatible Windows Vista?  If this is not the case, where can I get the version of Windows 7?

  Jj3down, welcome to the forum.

  You can only update the BIOS to the operating system that came with the computer.  In your case, Vista.  This means that you need to perform a system recovery to return the computer to its original configuration.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Problems after Windows Update on Vista wireless

  It seems that other people have a similar problem, but I'll post this new...
  I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

  I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

  Hi dabaum77,

  From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

   

  Access the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Follow these steps to disable the automatic updates:

   

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  
  Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

  
  You can also check the update problem in Windows Update history.

   

  Follow the steps to check which day caused the issue:
   
  1. open the control panel (all items view), and click the Windows Update icon.
     
  2. click on the link to view update history.
    
  3. to view the details of a single Windows Update-
  (A) select and right-click on a Windows Update list, and then click details.
  
  (B) click on close when finished.
   
   
  You can also uninstall the update that is causing the problem to occur, although it is not recommended.
   
  1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
   

  

  2. in the programs and features, click the link updates installed.
   

  

   
  3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
   

  

   
  4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
   

  

   
  5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
   

  

  
  6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
   
  
  Aziz Nadeem - Microsoft Support

• Printer problem after Windows XP updates on 06122013

  Title updates: Windows XP original on 06122013

  Updates of Windows XP on 06122013 seemed to make me lose contact with printer HP LJ1200 and had to perform the restoration of the system to 06112013 do work again. The printer is set up as a parallel device, running on Port DOT4_001 (according to article of Port in the properties of the printer) and was removed in the LPT1 Device Manager and computer rebooted and reloaded LPT1.
  Tracking the whole Troubleshooting MS system under properties and nothing seemed to allow printing, so I restored the machine on the eve. Now the printer works.

  Computer is a Xeon E1395 of double a ASUS PC - DL Deluxe Intel

  Everyone still faces a problem of printing with the new updates?

  Hi Michael,

  I see you got a problem with printer HP LJ1200 after installation of updates recently offered from Windows update.

  What exactly happened when you were trying to print after the recent updates? Have you received an error message?

  Thanks for the sharing of information when you perform a restore as solved the problem.

  This issue would have occurred as a result of updates related to the printer or the additional updates to the hardware device connected to the computer. Sometimes, when these problems occur after Windows update, we should always check the specific updates that have been installed right before the problem occurred. In this way, we can identify the update that caused the problem.

  As the problem does not persist now, I suggest you to download and manually install the updates individually to determine the exact cause of the problem.

  Please let us know if you need help on this question.

• can I remove the patch uninstall program after Windows Update completed?

  can I remove the patch uninstall program after Windows Update completed?
  are the uninstall program is temporary file? or the update file?

  because my full HARD disk starting with the files

  can I remove the patch uninstall program after Windows Update completed?

  Only if you are sure that you will never need to uninstall the update of 100%.

  my full HARD disk starting with the files

  See this discussion archived instead-online http://aumha.net/viewtopic.php?f=62&t=33827

• I installed KB263380 KB2572073 and KB2518864 three times with success; However, I get the yellow shield saying that I need to update to Windows XP

  I installed KB263380 KB2572073 and KB2518864 three times with success; However, I get the yellow shield saying that I need to update to Windows XP

  I ran the Mr Fixit for this problem, and briefly, the yellow shield disappeared, I thought that it worked.  But as soon as I clicked the solution worked and Mr. Fixit was gone, the yellow shield came back and said that I have to update these once again.

  Thanks for the article.  The icon stopped appearing after the third time I've updated from Windows.  Someone must have solved the problem to Microsoft.  I did nothing except reboot several times.  Finally, the Update icon went in itself.

• I need to update my windows now. How do I do that?

  Repeat with my computer and need to update my windows.

  Have the computer configured for automatic updates, but not happening and I can't risk waiting.

  I have not yet learned to service pak 2, yet.

  Help!

  ["XP Gold" is the original version of the XP before all service packs.]  If you already have SP1 or SP1a, follow the first set of instructions below.  To determine your current pack service, right-click on desktop and select Properties.  The "Additional References" sections are largely obsolete now.]

  Longtime MVP Robear Dyer (PA Bear) MS:

  HOW TO get WinXP SP1 or SP2 fully patched after a 'clean install': http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  1. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  [Yes, you can jump SP2 if you run WinXP SP1.]

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3 connected as long as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  Other references:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.

  Go to http://support.microsoft.com/oas/default.aspx?gprid=1173 . Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  5 steps to help protect your new computer before going online
  [installation clean = new computer]
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Measures to help prevent spyware
  http://www.Microsoft.com/protect/computer/spyware/prevent.mspx

  How TO get Windows XP Gold fully patched: http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  1. download & save the WinXP SP2 installer on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8...

  [Yes, you can jump SP1]

  1B. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3. administrator, if necessary, double-click the saved file to install Windows XP * SP2 *.  Follow the prompts. Be patient and restart twice when the installation ends.

  3B. logged on as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered.  Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  References with dubbing:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.  Reach
  http://support.Microsoft.com/OAS/default.aspx?gprid=1173 | Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  Protect your PC!
  http://www.Microsoft.com/athome/security/computer/default.mspx

  Learn how to protect your PC by taking the three simple steps
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3AD23728-497...

• Start normal mode after windows xp bar charge it gives black screen and in safe mode it gives blue screen

  Victorinox original title: Black scree & blue screen...

  So my laptop that is running Windows xp, start in normal mode after windows xp bar charge it gives black screen and it stays like this, and in safe mode it gives blue screen, what can I do? I need your help atleast to save the files to my hard drive...

  Hello

  · What is the error code or error message that you receive when the computer starts in safe mode?

  · Were there any changes made on the computer before the show?

  · What is the number and the model of the computer?

  · Who is the service pack installed?

  Try the methods below:

  Method 1: Disconnect all the devices connected to the computer such as printers, scanners or USB hard drives and restart the computer and check if that helps.

  Method 2:

  Try to start your computer in last known good configuration. You can check the link for the procedure: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  Method 3:

  You can follow the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027