PS CC 2015 crashes when you zoom while transforming the two layers at a time

Similar Questions

• My MMC crashes when you try to add the Certificates snap-in

  My MMC crashes when you try to add the Certificates snap-in

  Error: Microsoft Management Console has encountered a problem and needs to close.

  When to see the details, it shows a mfc42u.dll error.

  Hey Sankar,

  Try Mircosoft Fixit: http://support.microsoft.com/gp/slow_windows_performance

  You will need to authenticate Windows.

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• Portfolio crashes when you try to build the cover page of an image imported via Lightroom sync project.

  The title says it all.  While you can import images into a new project through Lightroom mobile sync when you try to create a cover image for the project, you can select one of the imported images, but when you try to apply the portfolio crashes.  The only way to go beyond this stage is to import them separately a jpeg.

  Another problem with imported via Lightroom photos mobile sync, it's that the display full screen obtained by double clicking on the image in the project is not centered on being right-justified display.  There seems to be no way to change this behavior.

  How to overcome those problems?

  Just tried again this morning and guess what it worked perfectly.  Only difference I can see is that Lightroom is running and who claims to be always sync when I had the problem and this morning when the problem went away Lightroom was off.  Incidentally, if you want to report bugs that you must go to the portfolio help page and ask a question.

• Window and the mouse crashes when you try to close the windows

  Original title: window crashes when you click on the red X

  I use Windows Vista Home Premium (64-bit platform).  Just recently, when I right click on the red X in the upper right to close a window, the window and the cursor freezing for about fifteen seconds.  The window then closes, and the slider works normally.

  This happens to my office, although my laptop (same operating system Vista, except for the 32-bit version) works normally.  I use CCleaner on a regular basis, and I have the latest version of AVG anti-virus and Microsoft Security Essentials installed.  This Setup has worked well for over a year.  This problem appeared only in the last 24 hours.

  Gordon

  Houston, Texas

  Hello, Mr. the President Y. K..

  First, as soon as the computer and then restarting it later in the day, the question has not repeated itself.  I had read on Google that people with this problem a couple of years, were not so lucky.

  I have not addded any software, except to perform Windows updates usual a week ago.  The suddenness of the appearance of my problem led me to believe that these patches were probably not at fault.  When I went to log on to this second time, I had planned to restore the system to a previous backup to see if that gave me work around the problem.  However, it was not necessary.

  No error message appears when the problem occurred, and the problem was if I was in the office or on the Internet.  Nevertheless, I intend to register your comments useful diagnosis for later use, and for your efforts, thank you very much!

  Kind regards

  Gordon

• InDesign CS6 crashes when you try to open the "bulleted list".

  Hello

  My InDesign CS6 crashes when I try to open the "bulleted list" (alt + click).

  Anyone know what I can do to solve the problem?

  CS6 is unsupported under El Capitan. A lot of problems with this combination and CS6 having reached the end of LIFE, you can restore your previous operating system, upgrade to creative cloud or learn to live with it.

• Firefox 36.0.1 on a Mac running Yosemite 10.10.2 crashes when you try to open the Add-ons Manager

  I am running Firefox 36.0.1 on an iMac with Yosemite 10.10.2. Firefox works fine except that it freezes and I have to force quit the application whenever I try to choose modules in the Tools menu. I've never had this problem before. This problem happened for three consecutive days with my iMac rebooted several times. The same problem occurs when you try to access the modules from the open menu icon. Does anyone have a solution? Thank you!

  If you put this in the url bar: subject: addons
  This also happens? If this isn't the case, add the back icon and remove it to reset.

  • Customize controls, buttons, and Firefox toolbars

  It also happens in Mode safe?

  • The problems of Firefox in Mode safe

• Satellite L300 - 29 X just crashes when you use some of the programs installed

  I bought a Toshiba L300 29 X for my daughter (30 years) help in its work of the University.
  Since we took this home and installed the OS it is questions. At first, I thought it was to do with Vista and so I bought the upgrade to Windows 7 and installed, but the same issues are there it just freezes when you use some of the programs installed.

  I tried restoring factory several times with Vista and still once I even made restoration to the first State to install W7 disk then updated from the web and then she still uses it for his United work and it freezes.

  There is nothing wrong with his work United as when using my laptop or even its partners a there aren't any issues or problems.
  Programs are in Office 2007 and it is the same copy I have in my laptop and they are both up-to-date.

  Its mobile partners is lower than its own specification and has less RAM so that to have only a single processor.
  I tried to install the W7 as a 32-bit and a 64 bit OS, and whenever there is any change in the problems with programs

  Can someone out there suggest a possible cause or same difficulty for am I at the end of my knowledge on this issue and my daughter is about to throw the thing out the window.

  Hello

  I think that the described issue could be related to a hardware problem, given that the laptop should not have problems running the Microsoft Office applications.

  In many cases, the s for laptop system could freeze due to a higher temperature.
  My girlfriend repeatedly asked for help because the laptop froze too.

  But the problem was linked to a higher temperature because cooling fans were clogged and cooling fans might not work correctly. She used the laptop sitting on the couch and there was not a lot of free space around the laptop to ensure good air circulation

  I want to say is that there are several reasons for such behavior annoying cell phone I think it would be wise to check the hardware first
  This should be done by the technician of the ASP.

• After updating windows 7 Edition family premium my phone regularly crashes when you try to access the folder

  After updating windows 7 Edition family premium my phone breaks down regularly when you try to access the folder - I installed several updates, correct its and also removed countless system software - can someone help please!  It normally occurs when you access my folder music or documents, even if they are empty! I'm using an asus laptop

  There is no free or paid for the software will fix PC problems

  'used cmd & scan' could mean allmost anything.

  Apparently, you have a portable computer, you do not have scource drivers for a laptop computer via windows update (unless this portable machine said) but this laptop manufacturers support site, then visit this site of support of decision makers and reinstall all the drivers available.

• Alienware 15 'K' key crashes when you press any of the line

  Howdy,

  I have a little problem with my new laptop Alienware 15. Two weeks after getting it, I noticed that the key K tends to get stuck when you press any of the line. Basically, it remains in the pressed position and not coming back to the top unless I force it by inserting something like a needle under it.

  In the limited time, I used the laptop I have not stressed that special touch at all (just looked on the key combinations of the games that I've played so far and the K key was not used).

  Advice on what to do? I was thinking to get one of these cans of compressed air and blow air under the key and see if that solves nothing. A little scared to take a screwdriver and remove since who knows what I'm going to spoil. I would not have to send the laptop back just because one key is stuck and I hope it doesn't come to that.

  Thanks for any help.

  compressed air is a good choice, you can use a clean brush also (in my case I use both to clean my knees)

• Why Premiere Pro CC 2015 crash when you work with still images?

  I am in the phase of learning with first (edited on Sony Vegas for years) and I'm working on a test/learning the project using a mix of videos and photos of my family trips.

  Working with the video looks very good (although the thumbnails take forever to load for the still and video images and need to refresh every time that I re - open a bin). When I work with stills (jpgs in this case), PP CC 2015 crashes at various points. He fell down on a double click to add to the drafting of a subitem, when deleting a still in the chronology of the sequence, a trip as always on the scenario, when you open the tab effects, etc.

  I haven't done this experiment with video.

  Don't laugh, but I was hoping that my laptop Dell XPS (Core i7 4500U, Intel HD Graphics 4400, 8 GB of RAM) would have enough power to use first (a part of why I subscribed). I'm on Windows 10 and keeping the files I work with on my local hard disk solid state. I tried to solve the problem by updating and also reduce the graphics driver, but I'm not as much of a techie like many of you.

  Here is the log of the events since the last crash:

  Name of the failing application: Adobe first Pro.exe, version: 9.1.0.174, time stamp: 0x564dce25

  The failed module name: igdrcl64.dll, version: 10.18.15.4256, time stamp: 0x55a99b59

  Exception code: 0xc0000005

  Thanks in advance for any help...

  Jeff

  Hi Jeff,

  The photos you are editing are really big? How many RAM GPU you have? I assume you are using GPU acceleration (found in the project settings); If you do software only made you still a fall?

  Thank you

  Colin

  First Pro EQ

• Problem with Photoshop CC 2015, crashes when you click PRINT

  Hi all, I have problem with protoshop CC 2015. When I click on 'print', photoshop crashes. It happens when I am trying to print pictures that I printed before. New images work fine. It seems that there is save the settings to print on these images and photoshop can not find them because the printer driver has been reinstalled. How to solve this problem?

  The HP printer driver crashes - so HP is the only party that can help you, because they have to correct the bug in their printer driver is the cause of the crash.

• Satellite Pro L300D started crashing when you are connected to the projector

  Hi all, I have a Satellite Pro L300D, have since January. In March of this year, it developed a problem.
  He began to turn the power on and off screen until I got the blue screen of death and had to reboot the laptop, also BIOS crashed. He was sent to Toshiba and got sorted.

  I use the laptop in the Church for the presentation to the powerpoint, we use a projector that connects to the video output on the laptop, but it has now begun to crash whenever I connect the projector to your laptop.

  Can I use the powerpoint, switch to the view of presenters and show the presentation of 30 minutes, then the screen goes black for about a second, the laptop and the projector off, then when they come again, I get a message saying that the display driver has been restarted, little after that the screen turns off, and then market / stop about six times before that I get the BSOD.

  Also, if I show a clip AVI or video during the presentation, it will crash soon after or even before its done.

  Have updated the drivers for laptop, I always get a message stating all the drivers are up to date and I am quite at a loss to know what to do next.

  To be honest, I'm so fed up with it that I am almost to the point of buying an Apple Mac Pro and away from Windows-based computers all together, my friends have macs and they never have any problem.

  Someone at - it an idea on what could be the problem?

  RGS
  James

  Hello James

  Can you please tell me what mode you are using for the presentation?
  Is that what this duplication mode (the same image on the LCD screen and the external device) or something else?
  Do you have problems if you use the single external device (LCD screen is OFF)?

  Movie files can be problematic if you run on laptops LCD and try to switch to the external display while the movie is running.

• Crashes when you try to start the project

  I got no problem with iLife ' 08, Garageband, (IE. c 4.1.2) that works on my PowerMac G4 under Tiger and my MacBook 2009 in Yosemite.  However, when I installed it on my Mac Pro 2008, it crashes after that I have enter the project name and click Create.  Has done several times, even though I tried to find updates (says it is updated) and have rebooted the machine and also tried to reinstall.  I get the text according to report (see the attached picture) very much any help appreciated, I need this app for my video projects.  Thank you.

  

  With El Capitan you should use GarageBand 11 (version 6.0.5) or the new GarageBand version 10.1.0.

  You cannot upgrade to this new version software update running. You must purchase an upgrade. You can buy the latest version of garageband 10.1.0. Since the AppStore, or buy GarageBand 11 on an iLife DVD on Amazon or eBay, then update to version 6.0.5 from software update page.   GarageBand 6.0.5

• VB6 crashes when you try to change the power on the DIO state using NIDAQmx.

  When I try to change the power of digital output to a PCI - 6220M cardusing VB6 and NIDAQmx software, my plant of VB6.

  I have request to build a VB6 for the same card read all digital out and analog in, digital.  This app works very well.  I can't just change the power to high status.

  Hello Sir,

  I found a post on our discussion forum to a client who was trying to do the same thing as you and also ran into a crash of VB6. In his case, the accident was caused by an incorrect setting during the call to the function.

  The first part of the post office treats the correct settings. The second part of this post does not apply to your configuration, your type of card that supports under the power state.

  Please keep us informed of your progress.

  Kind regards

  Wouter

  OR Belgium