PS CS helps rule 6-0 Point

Similar Questions

• After you convert a Word DOC to PDF units on rule change to points

  Whenever I have turn a Word document (Office 2003) PDF using Adobe Acrobat 7.1.0 units on the rule under the toolbars to convert centimeters to points. So I have to change tools. It's no big deal, but I would be very grateful to anyone who has any idea how this can be avoided.

  ktomica,
  The link provided by Mike is 'Official' Adobe that acrobat updates the location.

  Because you're in 7.1.0 you need treat each version update 7 past 7.1.0 in sequence.

  Do this sequence: 7.1.1 update the 7.1.2 and 7.1.3 7.1.4.

  Be well...

• Need help with query for points and polygons, 2 tables of

  Hi all
  
  I'm slowly stumbling along trying to figure things out space.
  
  I have two tables, GEO_POINTS:
  (
  DEP_ID NUMBER (12) NOT NULL,
  LINE NUMBER 4 NOT NULL,.
  MDSYS. POINT_LOC SDO_GEOMETRY
  )
  
  and POLYGON_AREAS:
  (
  POLY_NAME VARCHAR2 (120 CHAR),
  POLY_DESC VARCHAR2 (120 CHAR),
  MDSYS POLY_POINTS. SDO_GEOMETRY
  )
  
  Neither table is engraved in stone, if any, I can change some structure.
  
  I'm trying to understand how to write a query to retrieve all the points in a polygon, perhaps even with an optional buffer provided by the user.
  
  Conversely, I would probably also need to know what polygons a point would have drawn in, and it's the only request I could make any progress on.
  
  What I have so far, which is not working properly, is the following:
  
  Select * from deposits_search where dep_id in)
  SELECT dep_id
  OF geo_points, polygon_areas
  where (sdo_relate)
  poly_points,
  (SELECT point_loc
  OF geo_points
  WHERE dep_id = 10282444),
  ("mask = ANYINTERACT") = "TRUE");
  
  In the light of the foregoing, I want to select all the lines of a third table (DEPOSITS_SEARCH), for all polygons which is a point. The DEP_ID column is my primary key for most of the data tables in the database, and the number rose in my application query. However, the above returns all rows. It should only return one, because I only have a polygon of test defined so far.
  
  Any help is greatly appreciated. Thank you
  
  Bill Ferguson

  in which case you must include a line of buffer for the interaction between the points and polygons (with a stamp),

  better, you use the SDO_WITHIN_DISTANCE operator.

  http://download.Oracle.com/docs/HTML/B14255_01/sdo_operat.htm#i77653

  Not so sure what you mean with "I always have problems while providing a point location and extract the polygons that point would be plotted in" as so-called before unless you want that as a 'transitional instance of a geometry. (Specified using a variable binding or a builder SDO_GEOMETRY.) »

  http://download.Oracle.com/docs/HTML/B14255_01/sdo_operat.htm#i78531

  Read what geometry2 means in there. Read the examples and you will see that you have the geometry second in space operator as a builder. If this is what you need.

  Luke

• With the help of new access points with old WLC 4100; LWAPP layer 2 switching 3-tier

  Hi all

  We currently use two solutions Wiresless LAN - a 10 AP1230 access points-based autonomous (5 years) and a solution based on a Cisco WLC 4100 (4112, running 3.2) with 12 AP1010 LWAPP access points.

  First thing, we are considering to replace the stand-alone solution with the WLC one. However, I'm not sure if we can use the new access points such as the LAP1041N or the LAP1252G with our current 4100 WLC. Access reported data sheets 'Cisco Unified Wireless Network Software Release 7.0 or later version' 'software '. Does this mean that these access points can only be used with controllers running 7.0 or later?

  If we are unable to use the new access points with our current WLC and need to buy a new controller: can we use access points AP1010 current with a new WLC as the Cisco 4402?

  Second thing, it is that we want to expand the networks configured on the WLC 4100 to another site that is connected via VPN wireless. Wireless Setup guide indicates that the LWAPP mode can be changed from Layer 2 to 3 layers so that the access points can be configured with an IP address, which allows you to place access points basically anywhere as long as IP connectivity exists between the AP and the WLC.

  Y does it as described in a document with the change of mode LWAPP layer 2 to 3 layers? Or ist just the following steps (if I understand correctly):

  -Change the Mode of Transport LWAPP on the controller of layer 2 to 3 layers

  -Creation of a PA-manager interface with an IP address in the same subnet as the management interface (tried that, without changing LWAPP mode transport first and not was not possible - error)

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Is it really just as simple as that? All information about it is very appreciated!

  / edit: I would also like to know if the 1260 series access point are backward compatible with 802. 11B. Whereas it is stated in 1040 and 1250 for example series data sheets, it is not particularly mentioned in 1260 data sheet.

  Thank you

  Michael

  Well, let's start with the simple question/answer

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Yes, it's as simple as that.

  As for other issues, looks like you would be better served with a forklift upgrade.  New controllers and new AP.

  Now, the AP 1230/1240/1250. all work on the 4.2, 1140 code starts with 5.2 and 1040/3500/1260 are 7.0

  The AP 1000 series is not supported after 4.2 code.

  Refer to here for the complete list of the AP and taken codes supported:

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html#wp610751

  From what I see, the 4100 is not supported after the train of 3.2.

  So, it really depends on what you are trying to accomplish with the upgrade.  If you are looking for a 80.211n support, you really want to be 5.2 or better, we had some problems with MRR + 40 Mhz channels, 4.2, 5 GHz band only.

• load the xml file into a database to help table of travel point

  Hello

  Someone help me please with a possible approach. I have an interface for APEX users where users can download a file xml in apex table wwv_flow_files using the element to browse with a button "submit". Now, after loading the xml file in the wwv_flow_files table. I need to read and load the xml data into a table sample_tbl. I'm using the version of Oracle APEX 4.0 and Oracle 10 g R2 database. Here is an example of XML file to load. Please help me possible suggestions.

  <? XML version = "1.0" encoding = "UTF-8"? >

  < dataroot generated =... >

  < MySample >

  < KeyId > 1234 < / KeyId >

  eddskc < KeyName > < / KeyName >

  < scheduleDate > 2013-06-16T 00: 00:00 < / ScheduleDate >

  < StartTime > 2013-06-16T 08: 00:00 < / StartTime >

  < EndTime > 2013-06-16T 08:30:00 < / EndTime >

  < / MySample >

  < MySample >

  < KeyId > 5678 < / KeyId >

  jppdf < KeyName > < / KeyName >

  < scheduleDate > 2013-05-19T 00: 00:00 < / ScheduleDate >

  < StartTime > 2013-05-19T 08: 00:00 < / StartTime >

  < EndTime > 2013-05-19T 08:30:00 < / EndTime >

  < / MySample >

  < / dataroot >

  Thanks in advance.

  Thank you

  Orton

  orton607 wrote:

  My sample_tbl has a start_time field and its data type DATE.

  Good.  Be sure to always store dates as the DATE.

  The application (in this case, APEX) needs to format the date date type in the appropriate human-readable format.

  The problem with the incoming data is the 't'.  You will need to convert a space using REPLACE() in the framework so that your SELECT statement

  From there on, conversion to the DATE data type is simply

  to_date( replace( start_time_str, 'T', ' '), 'YYYY-MM-DD HH24:MI:SS') as start_time
  

  And, just in case where, the conversion of DATE for the desired format:

  to_char( start_time, 'MM/DD/YYYY HH12:MI:SS AM')
  

  Although, I'm 'hours' as being left-padded with zeros... Am I looking for how / if you can get rid of the zero prefix (0).

• Need help with rounding / floating point

  I'm trying to get the total to increase par.01 and it works fine until the 6 clicks where he montre.0600000000001 how can I fix?  I'm still new to Flash if any help would be great.  This is my code so far...

  import flash.events.MouseEvent;

  clicks: the number of var = 0;
  button.addEventListener (MouseEvent.CLICK, addTime);
  function addTime (e:MouseEvent): void

  {
  
  TOTAL_TIME += 30;
  clickhere. Text = String (click on += 0.01);
  value = int ((0+.01) * 100) / 100;
  }

  Oops.  Here is the fix:

  function formatF(n:Number):String {}
  n = Math.round(n*100)/100;
  var s:String = n.toString ();
  If (s.IndexOf(".") is-1) {}
  s = s + ». » ;
  }
  var n = s.split(".") [0] ;
  var f: String = s.split(".") [1] m:System.NET.SocketAddress.ToString ();
  While (f.length<>
  f = f + « 0 » ;
  }
  "back n +". » + f ;
  }

  p.s. Please mark this thread as answered, if you can.

• When i, m going down a page he jumps upward, some body can help please

  i, m using samsung notebook,

  Hi banaraskhan,

  Please start by contacting Samsung technical support for assistance: http://www.samsung.com/us/support/supportMain.do.  Without more information on the model or your operating system and programs that are involved or when it started (or something), I can be more specific than the general page.

  If you talk about all pages in all programs, then I am inclined to think that there is a problem with your keyboard or mouse (or their drivers, firmware or software).  It could also be something as simple as a key stuck (like the page up key) on the keyboard which is consistently fighting your efforts in the other direction.  There are many possibilities.  I moved the thread of Valdez & here because this does not sound like a malware or an infection or something caused by programs to defend against infections.  You might want to update all drivers and checking each key on the keyboard to make sure it is not stuck (and blow air inside also).

  Try to boot mode safe mode with networking and see if the same thing happens here.  Know that the answer will help rule out some causes but not necessarily identify the cause (but perhaps refine your search).

  If you are talking about one specific program, then I am inclined to think that you should seek assistance from the technical support of the vendor for the program group.  If it's a browser, try to download or use a different browser (IE, try Firefox, Chrome or Opera) to see if the same thing happens.  Also try to launch the browser without Add-ons to see if that helps - if yes, is only a matter of finding the culprit.

  When did start?  Recently?  I might be tempted to suggest a restoration of the system to a restore point before the problem started. However, I think it is better to learn more about the whole situation than to do more - but you might want to keep in the back of your mind as an option for later.

  I hope this helps. If the above does not help, then please see the following to try to provide us with sufficient information to understand the issue well enough to help you or better know where to move or you refer to most appropriate aid: http://support.microsoft.com/kb/555375.

  Thanks and good luck!

  Kosh!

• SRP527W setting DHCP address and source firewall rules

  In my quest to find a decent ADSL router for VoIP, I found the SRP527W and so far it has been the best performer of a range of boxes from netgear, thomson, and zyxel.  However, I have two questions:

  (1) how to troubleshoot DHCP leases on the LAN address

  (2) how to specify source ip in the firewall rule

  Note:

  I currently have 1 computer on the LAN, VLAN1 interface

  * 192.168.15.100

  and

  2 IP phones on the LAN, VLAN100 interface

  * 192.168.100.100

  * 192.168.100.101

  Address three assigned by the DHCP server lease times with approximately 20 days.

  I would like to repair the three devices DHCP leases, for example if some port forwarding rules can be made with confidence that the rules will not point to another device in the future.

  from PVC0-> 192.168.15.100, Port 3389 for remote desktop

  of PVC0-> 192.168.100.100 ex.port 5881 to int.port 80 for voip phone web-gui

  from PVC0-> 192.168.100.101 ex.port 5882 to int.port 80 for voip phone web-gui

  Ideally, I would like the rules to act like that, limiting myself only to access these ports (from my remote site)

  PVC0 interface where the source is ip 12.34.56.78-> 192.168.15.100, Port 3389 for remote desktop

  PVC0 interface where the source is ip 12.34.56.78-> 192.168.100.100 ex.port 5881 to int.port 80 for voip phone web-gui

  PVC0 interface where the source is ip 12.34.56.78-> 192.168.100.101 ex.port 5882 to int.port 80 for voip phone web-gui

  I hope that makes sense, I appreicate any help you can give.

  Kind regards

  Paul

  Hi Paul,.

  Thank you for using the Cisco support community.

  With regard to two questions:

  1. Yes - it is possible to configure static DHCP assignments.  Use the DHCP Server rule configuration page and click the 'Show DHCP booking' button to assign.

  2. Unfortunately, it is not possible to configure rules to address source for the SRP520 list.  (This is possible on the SRP540 for further reading).

  Kind regards

  Andy

• Conditional rule is triggered

  Hi Experts
  
  We are in a situation where we need to invoke the Siebel takeover rules for trigger points different as button clicks, save records etc.
  Contributions of Siebel and expected outcome of the OPA are owned by entities that are common to all these trigger points.
  So, instead of having individual OPA and therefore rulebases (OPM projects) mappings for each trip point different, we want to examine whether we can use a single modules (project OPM) and correlatively an OPA Mapping in Siebel to invoke it.
  This is required to maintain all the rules of membership in a business district in a place or project to the OPM.
  
  During this operation, we understand we must separate rule files in the project to the OPM for each trigger points and the corresponding rule documents in these subfolders.
  He must also understand how to change the value of trigger point to OPA as 'Submit button', 'Field1 save' etc.
  
  But we don't know how for a trigger point special, we can say the modules to run the rules of this particular trigger only point and ignore the rules for other trigger points.
  A solution is to add the condition to check the trigger to each rule point, but has held the multitude of rules each having mutiple conditions, which is a good option or y at - it an easier way to do this?
  
  Help, please!
  
  Thank you
  Swati
  
  Published by: 927439 on February 13, 2013 23:53
  
  Published by: 927439 on February 13, 2013 23:54

  927439 wrote:

  According to my understanding, is the name of OPA mapping port for outgoing in determining server Web Service in Siebel, and while the integration, it searches a zip file of modules of the same name in the deployment directory of the server determination, which is generated by compiling the OPM project or one. If I have only one of the modules, then I'll have only 1 file zip for her determination Server deployment directory. How can I call it using several maps each with a different name and the name of the output corresponding to the webservice port. To develop.

  The "output Port name" in the mapping of Siebel BO serves two purposes. For a call from Server determinations, it is used for the outgoing port. For the Web appeal determinations it is used as the name of modules during the call to an interview of Siebel.

  When you use the server of determinations, the module name is never referenced directly, the only thing that matters is the url specified in the output Port.

  So, if you use a server of determinations only, its possible to have several mappings pointing to the same modules.

  It is also possible for the determinations of the Web, as long as you have another way to get the name of modules at the launch of a URL of determinations of the web.

  The best way to reproduce a mapping of Siebel, OPA is to export it, rename it and then import the mapping with the new name.

  The port mapping outbound example for AdminSmokeTest

  In the example below, two different outbound ports point to the same endpoint. The only thing different in this regard is the name.

  Name: AdminSmokeTest
  Full name of service: server automation determination strategy
  Transport: HTTP
  Address: http://localhost:8888/siebel-determinations-server/assess/soap/generic/10.0/AdminSmokeTest
  ...

  Name: CopyOfAdminSmokeTest
  Full name of service: server automation determination strategy
  Transport: HTTP
  Address: http://localhost:8888/siebel-determinations-server/assess/soap/generic/10.0/AdminSmokeTest
  ...

  I hope this helps.

  See you soon
  Frank

  Published by: frank.hampshire on February 18, 2013 08:47

  Published by: frank.hampshire on February 18, 2013 09:01

• (Management and port number) firewall rules

  Someone at - it information on how to get management and port number for a given ESX host firewall rules using the 'VI Perl Toolkit?'

  For some reason, I can't work this one on. I can get to:

  $host - & gt; config - & gt; Firewall - & gt; set of rules

  and from there I can get the label and the State enabled, etc., but I want to delve into the section rule to get the port number and the management as well as for each service.

  For example, from the CROWD:

  HostFirewallRule	Name	Type	Value
  Direction	HostFirewallRuleDirection	"entrants".
  dynamicProperty	[DynamicProperty]	Unset
  dynamicType	string	Unset
  endPort	int	Unset
  port	int	5989
  Protocol	string	"tcp".

  |

  How can I get this information for each service?

  Thanks in advance

  If you found this helpful, please consider awarding points

  Hi Paul,.

  You will need to first loop through the array rule set of firewall and from there you will get some properties this State if it is active, service, etc. and you will also have access to an array called rule that contains the rules within each of the ruleset. Once you go through the rules, you will find information about the direction, endPort, port and Protocol

  Something like this should work (there will be values that will not fill as endPort, so make sure you check before printing/etc.)

  my $fw_ruleset = $host->config->firewall->ruleset;
  
  foreach(@$fw_ruleset) {
       my $rules = $_->rule;
       if($_->enabled) {
           print "Firewall Rule: ", $_->label, "\n";
           foreach(@$rules) {
                print "Direction: ", $_->direction->val, "\n";
               print "End Port: ", $_->endPort, "\n";
               print "Port: ", $_->port, "\n";
               print "Protocol: ", $_->protocol, "\n";
            }
            print "-------------\n"
       }
  }
  

  Here's a quick snippet out:

  Firewall rule: SNMP Server

  Direction: inbound

  Use of uninitialized value, catalogue in ligne./vmwareHealthCheck.pl 1748.

  Ending port:

  Port: 161

  Protocol: udp

  Direction: outgoing

  Use of uninitialized value, catalogue in ligne./vmwareHealthCheck.pl 1748.

  Ending port:

  Port: 162

  Protocol: udp

  -

• How to create a (class dot Tag without spaces) tag.class via the window of Dreamweaver CS5 rule.

  How to create a tag.class via the window of Dreamweaver CS5 rule.  I want to create a class that affects a specific tag.  I can for this use the code window, but I'm trying to use the Style CSS window.  The tag that I create is 'ul.navbar.  I was able to be machined, but I get "ul .navbar", note the space between L and the period.  I want to remove the space and just create "ul.navbar", without having to rename.  The code will appear as:

  ul.navbar {
  position: absolute;
  width: 9em;
  left: 1em;
  top: 2em;
  list-style-type: none;
  }
  The question is perhaps more base on my understanding of CSS rather than Dreamweaver, if yes, I'm sorry.  I'm just starting to work with CSS.
  Thanks for your help.

  My point is that this is not the best way for the style of this element of the page in most cases.  However, if you create a rule made up, you can enter "ul.navbar" directly in the selector name field.

  Don't overuse of classes.  They confuse you in just a few weeks after you have modified looked at the site.

• selectingitems and trackpad pointer moves its own

  I was watching a video of Amazon and may have struck a couple of keys, or my hand slipped in the keys - I don't know, but pointer froze on the follow-up to the film bar at the bottom of the screen (not sure if this is relevant, or what is called in fact this bar) in all cases, the pointer froze and then began to move erratically in bursts on the screen , selection of apps, ibooks, photos, etc. and then OPEN them as if I had clicked. Literally goes haywire as if it had a life of its own. I have NEVER experienced this during the 11 years that I've had the Mac laptop. I don't know if trackpads wear out (my current MacBook Pro is a vintage 2012 and I debated update, but it was working very well.) I wonder how to clean the dust/debris under keys because I know it can be done and I was wondering if something got under the trackpad (seems pulled by the hair) but it's really another question for me to continue. Any help on trackpad possessed pointer would be appreciated. I don't see that this issue anywhere else... - Pam

  Remove the bottom plate and inspect the inside.  Pay attention to the battery to see if there are signs of expansion.  If so, take it out and have a new installed.  An extended battery can affect the trackpad.

  If no success, make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.

• Help tab too big text area

  The image here will describe perfectly what I mean: http://postimg.org/image/ea9mhb8nh/
  I don't know exactly how it's called, but the displayed help text when the pointer is moved to the title of a tab is a little big. What is the cause of the problem?

  I have the same problem (Firefox 25.0, Debian Wheezy), and I've found a workaround.
  I installed the extension "URL of the tab tooltip" (see link below) and then it turned off.

  http://addons.Mozilla.org/fr/Firefox/addon/tab-tooltip/

  Now my tab ToolTips are displayed correctly.
  I had to remove and reinstall the extension after a firefox update.

  I hope this helps to find the source of the problem.

• HP 250 G3: Helps pci device &amp; drivers CPU :)

  Hello to all help to solve these points mark on my control panel;

  HP 250 G3

  CPU Celeron N2840

  

  Hello:

  You need these drivers...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5449369 & swItemId = ob_132256_1 & swEnvOid = 4059

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5449369 & swItemId = ob_151010_1 & swEnvOid = 4059 #tab1

• After upgrading to Vista my Toshiba MCE Remote Control doesn't help

  Hi all.

  As I wrote in the subject line really. Buy Toshiba laptop with the option of upgrading to Vista by releasing. Setting up my new laptop and waiting for Vista to arrive, I ordered the direct remote control (with USB wireless "dongle") of this Web site.

  He arrived soon and I was up and going, watching video content HD via DVI - HDMI cable I bought also from the comfort of my armchair.

  Then came my copy of Vista. I was so happy! Then I discovered that drivers do not seem to work and there is no update on the Toshiba site.

  Now I have to lift me up out of my comfy chair to put on the next video. I'm a toned guy - it's not as if I need the exercise!

  Thanks for reading what I realize now is somewhat a position of "epic", and I hope someone can help me out or point me in the right direction at least.

  Thank you!

  Hello

  I m not surprised many programs and 3 devices do not work with Vista because of compatibility.
  S hope let this unit will be supported for Vista and drivers is published in next time

  By the way: what OS requirements can be found on the packaging? Y at - it something about Vista?