PS CS4 Tekton Pro are all uppercase only?

I had the opportunity to use the font of Tekton Pro as best it corresponds to a different text for a customer.  However, when I use the text tool and select the Tekton Pro font, the only characters who will show as I type are uppercase only.  Shift, caps lock, shift, etc., etc. has no effect.  I know that this font is tiny.

Any tips/advice/suggestions?

Thank you!

Win7 - 64 bit, 6 GB RAM, CS4

Open the character palette and uncheck the all caps button.

Tags: Photoshop

Similar Questions

  • RAM Mac pro 1.1 detects only not all after kernel panic

    Hello

    my mac pro 1.1, 2 x 3.0 Ghz quad core, ram 24 GB os x 1.7.5 just had a kernel panic and stop, after being on for 12 plus hours for most sitting idle. When I restarted the mac pro, now he is grateful only 12 GB of ram on a lift and another elevator shows empty, the DIMMs are installed in mounting a 4gb4gb2gb 2 GB, riser board b = 4gb4gb2gb2gb =, are all matched pairs. all the ram has been installed and functional for the 7-8 months without any problem. This is the first time my mac has never stop from a kernel by itself, panic and he never failed to see half of the ram before, in fact it worked great for quite some time so far. I don't know what is happening and I hope someone can help me get this figured out and find a solution to this problem, thanks in advance.

    Bill

    You have a RAM failure.

    The Mac Pro features help Error correction Code RAM with hardware integrated with its Xeon processor. The Mac Pro 1.1 uses FBDIMM who get hot and do not have a long life expectancy. Work for 7-8 months does not work tomorrow.

    The error correction is used aggressively at the start, and all DIMM found to have errors during the Power-On Self Test brief execution have their slots declared 'empty '. This isn't an anomaly, these modules DIMM turns out to be BAD.

    If these modules DIMM is stickers from the seller, you can get replaced them under warranty of the seller.

    The kernel panic, you met just might be part of the same problem. You can find the report and review it and post it if you want.

    Mac OS X: how to connect to a kernel - Support Apple panic

    RAM problems show themselves as control panic machine, nucleus, often detected by more than one processor at a time.

  • If anyone can help, I just bought a 2011 mac book pro and I use it for school and I work in education and currently I have lightroom, photoshop and adobe DC, are all the other apps I put on it?

    If anyone can help, I just bought a 2011 mac book pro and I use it for school and I work in education and currently I have lightroom, photoshop and adobe DC, are all the other apps I put on it?

    Chaka - welcome!

    What you want to do on your "new" MBP?

  • Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

    Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

    Chuck72352,

    Hello! It's my understanding you need to add the files separately to Source Code control with the .lvproj file.

    This is a lot of information on Source Code in LabVIEW control practices.

  • Ive ordered a upgrade for my PES for Mac, the only downloads available in my list are all formats of Windows, what can I do?

    Ive order and paid for an upgrade to my PSE, its has taken 24 hours and are all options for windows download, what can I do with it?

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

    Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

    Hi janeslens,

    • Go to Lightroom > Preferences.
    • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
    • Restart Lightroom and see if it works.
    • Please make sure you also update of Lightroom to the latest version, which is 6.3 Lightroom

    Let me know if it helps.

    Kind regards

    Tanuj

  • I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

    I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

    All 4 titles are coming as complete blends not divisions. I guess that's a problem with the entrenchment of the channels, but can't see how to fix. Andy

    Is what would you say to my quick thought without following through all the processes after the fact, the sequence settings? My thought is that the sequence settings must be multichannel as you show, but each Adaptive track, so this channel map is routed at your leisure. If this is not the case, already, it would create a new sequence with these settings.

    I try to upload the photo

  • OfficeJet Pro 8600 all-in-One connected as network printer loses connection

    In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

    After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

    1. Start Control Panel  connections network and Internet

    2. Choose "network connections."

    3. Right click on "connect to the Local network.

    4. Choose "Properties".

    5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

    6. Select the tab labeled 'Power Management'

    7. Uncheck the box "allow the computer to turn off this device to save power".

    8. Select the "Advanced" tab

    9. Select the entry "power saving Mode".

    10. If this entry is set to change 'On' to 'Off '.

    11. Select 'OK', and then close the windows that were opened

  • OfficeJet Pro 6978 all-in-one: OfficeJet Pro 6978 / will not download drivers

    I just bought this printer Office Jet Pro 6978, All In One Printer.  It won't let me download the driver listed in the steps to implement, it fails every time.  I tried to use the CD that came with it, it gave me a message "this computer's operating system is not supported."   So this printer will not work on my 64-bit?  Or elsewhere?  My computer is a HP.  Where can I find a download driver for this printer for my operating system?  When it prints, it prints a nonsense.  % beginprolog % beginresource: file and so on with such things.  I am at a loss... Any help would be great.

    Hello

    Sorry, but the printer is not supported on Windows Vista 64-bit.

    64-bit support is only available in Windows 7 or later operating systems.

    You can find the printer specs below:

    Vista 64-bit is not supported.

    http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

    You must upgrade your operating system to a later version to use instead an OS 64 - bit, Windows Vista 32 - bit to insall or replace it with another printer, compatible with your operating system.

    Respect,

    Shlomi

  • What are all these powers?

    On my new Droid Maxx, I noticed a large number of credentials in foreign languages cited in my settings/security & Screen Lock/Trusted powers. They came, they are sure, should I turn them off?

    I just upgraded to a Droid Razr Maxx (ruptured due to the fall of floor tiles in Gorilla glass) for the Droid Maxx. Fabulous Gizmo!

    Found this on another site, displayed by the user AlphaDog00:

    These are all root certificates. Certification authorities issuing cents to websites have their root certificates loaded on the phone, the phone can check that a cert of sisal of a web site is legitimate.

    It is a lucrative activity so well there a few cases in the world. And the big banks have become cases also.

    Theoretically, they are all legitimate that it's a huge process (or it was) to obtain your certificate of root included in an operating system or default browser.

    Can remove you them? Yes, but be careful. If you use only USA sites then you can probably remove most non - USA case. But why do they worry you? Older versions of android doesn't allow you to remove the elements, and the only time wherever you need if a certification authority has been compromised.

    If you do not remove one you need, you will get SSL warnings on a site not approved visiting, but you should be able to add the rear root cert.

    HTH

  • What are all these chipsets?

    I am trying to download MEI and noticed that v7 has a set of supported chipsets and v8 ++ has another set of supported chipsets

    my laptop came with v7.0.0.1144 and when I tried v8.xx it worked but I noticed a light Frost in my laptop as soon as I installed them, then it was gone, but with the series of xx 7. I never get this light gel...

    So I was wondering maybe the xxx 8. are for the desktop only or not compatible with the HM65 chipset?

    Nobody knows what are all those underlined below chipsets?

    Yes, you guessed correctly - these are the chipsets 'office '.

  • HP Officejet Pro L7590 all-in -: print to the location of the file

    I have a HP Officejet Pro L7590 all-in-one printer.  It has recently been make me save a Web document somewhere (like my office).  Only then can I print a document from there.  Recently I was talking to someone about this and they said to try and find the option "Print to file" because it could be activated, so maybe that's my problem.  Does anyone know where this option "Print to file" is so I can try and get it printed as before?  If I go to a regular Word document, it prints very well.  Help!

    Once clicking on edit you should simply select the listed HP Officejet Pro L7500 series icon in the list, then you should be able to print.

  • Office Jet Pro 8600: all-in-one Officejet Pro 8600

    Hello

    My Office Jet Pro 8600 all = 0n - one did a terible grinding noice when pulling back a page for double-sided copying. Do I nbeed something oil?

    Thank you

    Greg

    Hi @Valdavidian,

    Welcome to the HP Forums!

    I noticed that your HP Officejet pro 8600 deploys a creaking, after the attempt to copy double-sided. I'm happy to discuss this issue for you!

    "Try rolls of cleaning and the Firmware update by following the steps described in this guide, a ' paper ' or 'Pick motor stalled" Message appears and the printer is not Pick Up or animal....

    If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    Hope this helps and have a nice day!

  • Task Manager, regedit, run and command prompt are all disabled on my computer.

    Task Manager, regedit, run and command prompt are all disabled on my computer.  Is it possible to fix it because it allows to launch on a network?

    Hello
     
    (1) have tried to start in Safe Mode, Mode safe with network...?
    (2) remember to make changes to the computer before the question?
     
    See the methods mentioned below and check if that helps.
     
    Method 1:
     
    Scan your computer for Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

     
    Method 2:
     
    See also:
    Hope this information helps.

  • The desktop icons are all "Vanilla" - how to restore?

    My hard drive crashed and I reinstalled successfully all of backup drive.  However, I had to reinstall IE8, also successfully.  Only problem is that my desktop icons are all what I call "Vanilla Windows."  While all printed identification, logos custom since sites are missing.  Each of them.  How can I restore them?  Thank you.

    Hi BrettParker,

    ·         The favicons in Internet Explorer and the desktop icons are you referring?

    You can run Microsoft fix mentioned article and check if the problem still persists.

    Difficulty of broken desktop shortcuts and common system maintenance tasks

    http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

    Let us know if that helps.

Maybe you are looking for