PSC 1610 cannot print

Similar Questions

• Printer while a PSC 1510 cannot print

  Printer is OK connected; test page is printed, it is not obey a normal order of printing. Message says it is not connected, but there is no problem with the connections! Please help me! Maybe the driver is damaged?

  Hello igabai,

  First of all, let me apologize for the confusion on the connection time you use.

  Secondly, I suggest that we get rid of the usb hub. If you have others designed which must be connected to the hub, that's fine, but when it comes to the HP printer, the hub is more than probably the reason why you have questions.

  I suggest we go through the whole process and attempt to reinstall the printer.  Please remove the USB from the printer and the hub and leave that it disconnected until further notice.

  The next step we will take is to uninstall the software and drivers.  Please click on the following link for printing software uninstalled.

  Once the uninstall is complete, reboot the computer.  When the computer is back and running is then go ahead and download HP Deskjet and Officejet full feature software and drivers.  Please save the download to the desktop on the computer so that it creates its own icon.  This will make it easy to find download.

  Double-click on the icon and follow the instructions.  The installation will prompt you as to connect the usb cable so please plug it NOT even there.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• PSC 1610 all-in-one printer: PSC 1610 will not print

  HP PSC 1610 all-in-one

  No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.

  Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.

• I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer.

  I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer. What could be the problem and how can I fix it?

  Hi Dee,

  Please contact Technical Support for assistance with your printer HP: http://www8.hp.com/us/en/support-drivers.html.

  Good luck!

  Kosh

• I have a hp psc 1610 all-in-one printer

  my continuous printer give error message paper jam, I checked and there is no paper in the printer you can tell me how to solve this problem, I have windows xp I have uninstalled and reinstalled software but get the same message

  There is a document that addresses the issues of paper jam in PSC 1610. This document can be found here.

  Hope this helps

• Not printing color (only BW) when using PSC 1610 Pro Mac OS x 10.9

  PSC 1610 attached to the Mac Pro OS x 10.9 for the first time (printer was already used successfully with Snow Leopard on MacBook).

  First, I changed the ink cartridges. Test the printer print is successful and shows the colors.

  Printing a photo or a computer page is only in BW. I don't see any color in display control Printers & Scanners or in file/print.

  I need help! Thank you!

  Hi Reg1nald

  Generally, you have nothing to do when you upgrade, but you are missing the options for color with this driver.

  I would like to Uninstall the old software since you have migrated the files and the wrong driver could be installed. You can install the software by following this document.

  Check and see if you have different options in the driver now.

  Let me know.

• Remove and check color HP PSC 1610 printer cartridge error message.

  Original title: remove and check color cartridge

  My printer HP PSC 1610 rpet 'Remove and check color cartridge'. After that, I press 'ok' and the message still appears. What is the problem with the printer? Thank you.

  Hey cobra10,

  Fortunately, there is an article by HP Knowledge Base that talks about this problem. Please follow the solution provided in the article below to solve the problem.

  Remove it and check [color / black / photo] error message appears on the screen of control of product and the product does not print.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receive error message when printing on printer HP PSC 1610

  Original title: I use a HP PSC 1610 printer. Whenever I try to print I get an error message. I have already uninstalled and reinstalled the printer, but keep getting the same results.

  Whenever I try to print I get an error message. I have already uninstalled and reinstalled the printer, but keep getting the same results.

  Hi RLindorff,

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  3. What is the exact error message you get?

  4. does this happen when you try to print to a specific application?

  You can visit the following links and try the Fixit or consult the solutions to some common problems with printing:

  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• PSC 1610 now scans and copies black Uni. Prints very well.

  My HP PSC 1610 all-in-one lost the feature since I replaced my iBook G4 with OS X 10.4.11 on an iMac with OS X 10.7.1.  Scanned using Capture of Image Preview images are black.  Copies made on the PSC are also black.  I noticed that the first use of these features with my new iMac, but the problem could date back to before the computer change because I scan and copy is rare.  Is there a way to determine if this is a software problem or a hardware problem with the bed scanner PSC?

  Well, we could reset the system to the printer by unplugging the power supply on the back for 30 seconds (do not turn the printer off first), then plug back in and turn on.

  If it still does not work, its probably time for a new printer.

• my HP PSC 1610 does not print

  I have a dell dimension 2400 desktop under XP.  I try to install this PSC 1610 all-in-one printer.  I down loaded the software driver.  When I try to print the printer begins to run, and looks like it's printing, but the page comes out blank.

  My previous printer is a HP Deskjet D4360.  The connector on the printer is the same; I have no new cable; So I used one of my 4360.

  Please help Frank

  You can check the ink levels by printing a self-test page.

  With loaded paper, press on set up until print report appears on the screen, then press OK. Press OK again.

  If this does not work, go to step 1.

  I would like to know how to work the other steps.

• print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now

  print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now

  I have a printer HP psc 2510 series deskjet.  Print many documents, it has notified me that I was low on ink which I was aware of.  I had a little more what to print, and chose the young project option for printing of no more than 1 to 3 pages.  I constantly tried to cancel the job that kept the origin of the printer show (not answer).  It aligned to the top other jobs, but after trying to delete all, printer then turn on again, it still shows the original print job, and I'm unable to find a way out of Quebec

  Verification of updates, there are only two listed as "optional" still thought by downloading them, it can solve the problem.  It does not; He gave the error message on the print job in that causing a feeling of power.

  I've never seen this before; I was always able to plug & play on my desktop printer and trying to use it on my Sony VAIO VGN-NW310F series.

  It is imperative to get this resolved.  School assignments are due and professorts not only does not want to hear the excuses of any kind, printing problems have always been easily resolved so far.

  Please - I need immediate assistance.  I already used the troubleshooter printer online which, as said earlier custody indicating the print job to Québec, is causing the printer to not answer.  I cancelled each time, but it will not go away.  I turned off the printer, reinstalled in the hope it would be empty, but it will not.

  I appreciate your atttention guest on this subject.  I work with Windows 7 Home Premium 64 bit operating system.

  Thank you for your help.

  Robyn Drake

  E-mail address is removed from the privacy *.

  Try in Services, locate the printer spooler, select it, and then stop the service.

  Then check if you can delete the print job, if so restart the service

• Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

  Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

  My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

  Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

  I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

  I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

  I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

  Thanks in advance for all who are able to provide me with assistance.

  Thank you

  Alison Black.

  LIVE FAST, FIGHT HARD CLOSE.
  HUSTLE, LOYALTY, RESPECT

  John Cena (WWE Wrestling Heavyweight Champion)

  Hey

  HP have the customer.

  has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

  but fisgured this is a setting of the printer.

  so if you have the HP SOLUTIONS CENTER's new installed.

  down the down theres a SETTINGS tab click on it.

  go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

  the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

  Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

• Relocation of the HP PSC 1610 printer

  I accidentally deleted the necessary program for my HP PSC 1610 all-in-one work on my computer. I have the original and the inserted disc when asked by the installation wizard.  But then he asked "cd hp", which I can't find. Is there any way I can recover what I removed from "Add or remove programs"?

  Hello

  One option is to use Windows restore to restore the system back. Another option is to download files from HP and reinstall them. Here is the link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=390315

  Kind regards.

• PSC 1610 all-in-one

  Can I e-print to my HP PSC 1610 all-in-one?

  Hi JudithAMorrison,

  Just to add some additional information for you, your PSC 1610 is not able to ePrint, as it was released before that HP has applied the ePrint technology for their printers. All new printers are usually capable ePrint, so if you are wanting to acquire a range of HP active ePrint printers, you can contact HP Technical Support at the 1-800-474-6836 and see what kind of offers, they have to get you an active ePrint printer.

  If you need anything more, please let me know. Have a great day!

• How to remove memory card from my digital camera to a PSC 1610 all-in-one

  I first took my Sony Cybershot memory card and it is stuck in the slot of the PSC 1610. It seems that the printer/scanner read the card properly because I was able to print a photo proof.

  I tried to use Picasa on my MacBook Pro to transfer the images from the memory card in the printer to the laptop. That doesn't seem to work, so I would get the card memory of the printer/scanner. I don't think just pulling on the map, it's the correct procedure... how to get out? I pushed several buttons on the PSC 1610, nothing helps.

  Any suggestions?

  Hello

  1. is not a good idea to copy photos, files on camera, specially made in the shape of these cards memory cards.

  2 normally, just gently push the card once again, and then exit, the card should come out.

  3 you must map the map as network drive until you can access the card of your computer (s). Here's how (valid for all memory cards):

  http://support.HP.com/us-en/document/c00149194

  Kind regards.