PSC 2110 white than yellow when copying and scanning

Similar Questions

• HP Officejet Pro more than 8600: HP Officejet Pro 8600 more black vertical line when copy or scan with automatic feeding

  HP Officejet Pro 8600 more black vertical line when copying or scanning using auto flow only.  It works very well on the flat.

  It is now resolved.  It seems that there is a strip of glass that is used for the automatic copy of power and research.  The glass has a note on it that I cleaned which solved my problem of vertical line.

• How can I remove highlights that I just made?  Also is there any other than yellow highlight color and where can I find it in?

  Old woman trying to learn computer science. Unfamiliar with PDFs & using them. How can I remove underlines that I just made doc adobe?  Also is there any other than yellow highlight color and where can I find it in? Thanks for any help.

  Hi [email protected],

  Once you highlight the text in the PDF file, the point highlight comment will appear in the list of comments on the right side.

  If you want to change the highlight color, then you can press (Ctrl + E) or simply highlight text just right-click on it and select properties from the context menu.

  Click on the color option in the color palette that opens, choose the color you want.

  

  Kind regards

  Ana Maria

• Color LaserJet MFP Pro200: Only a picture scratched when copying or scanning

  Whenever I'm doing a scan or trying to copy a page, all I get is a page with thin stripes, up and down. I did a last, I tried to make a copy in color. I have a page of stripes coloured accordingly. Others I made black so the stripes are only black and white. It does if I do a scan or try to make a copy of something. I did scans with success until last week. Do not know what is happening. Thanks for any help.

  Hello @awestruck,

  I understand that you are experiencing quality problems when scanning or copying on your HP LaserJet Pro 200 M276nw MFP color. I would like to help you today to solve this issue of quality. If the question scratched image produced through both the dish and the ADF on your computer, then your printer is probably affected by a power or programming problem. If the striped image problem occurs through the dish or the ADF, but not both, then there is likely debris sweep across which is at the origin of the defect. Can I please you follow the steps below to resolve this issue.

  • Problem 1: Striped Image occurs in the dumpster and automatic document feeder:

  Step 1: Check of power:

  Please ensure your printer is plugged directly into a wall outlet for power. Power strips and surge protectors can cause HP printers lack power and will not work properly. Once your printer is plugged directly into a wall outlet, please run a test copy to see if the problem is resolved. If the problem persists, proceed to the next step.

  Step 2: update Firmware:

  There may be one occurring problem of programming of the internal Firmware in your printer. The Firmware is the internal "brain" of your printer. It determines what the printer is and how the printer it. If there is a corruption in your printers programming it can cause problems with your machine performance. Can I have it please click here to download the latest Version of the Firmware. Once the Firmware has been downloaded, please follow the instructions on the screen to 'send' the latest Firmware for your printer. Once the Firmware has been updated successfully please test scan and copy functions to see if the problem has been resolved.

  • Question 2: Striped problem occurs of the bucket or the ADF, but not both:

  Step 1: Clean the machine and check the settings:

  Please click here to access the appropriate support material. Once the document opens, please run through the procedure to search for tasks or debris on the glass flat or the mechanism of the automatic document feeder. Once the troubleshooting is complete please try to copy and scan to see if the problem is resolved.

  Please reply to this message with the result of your troubleshooting. If the problem persists, please let me know if the lines problem since charger document both flat. I look forward to hear from you!

• HP officejet 4630: copy and scanning does not

  Since the upgrade to Windows 10 HP 4630 Oficejet stopped working for copying and scanning options.  Print and fax options are OK.  Have updated to the latest version of the software (many times) without success.   Also checked the scan of the computer is turned on.  When you use HP Print and Scan verification pilot doctor fails (unable to communicate with the product). Follow the suggestion without any positive result.

  Have tried everything that I could find on the internet to solve the problem without success.  Any ideas what else can be done or

  the driver for scanning and copying does not work with Windows 10 in all?

  Even if I try to use the only printer with Dell computer off, still can not copy or scan a document.

  Hello! Welcome to the HP community @Stewball1313,

  I read your post about how you are unable to make copies or your Officejet 4630 analyses, and I wanted to respond with my own suggestions. As you can not copy, it is a sign of a hardware problem as copies do not involve the computer somehow. I think the question can be a failure of scan of your description, as for you to open the link I posted below and try a reset and checking the connection of power supply and then try to make a copy again. If copies are still not, I would then contact HP directly to see about a printer replacement or trade for a new unit. If you encounter other problems, let me know and I'll do my best to help you!

  (Note: the Officejet 4630 is compatible with Windows 10 and it has full functionality of drivers available for the operating system.) However, if the problem is a hardware failure, a driver will fix a hardware problem).

  All products - in - One HP - a 'Failure of the Scanner' Message displays on the all-in-one control panel and you cannot scan, copy or Fax

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

• my hp photosmart premium copy and scan features dark gray

  copying and scanning my printer has dark gray features which becomes worse.  When this happened in the past I've corrected by disconnecting reconnecting... does not work now.  Help!

  I am so disappointed by the quality of this printer compared to my old HP printer. (

  Hi Holly,

  Follow the steps below.

  1. remove the ink cartridges and printhead Assembly and place them on a safe surface.

  2. remove all cables from the printer, including the power

  3. make sure that the power is plugged directly into the wall outlet

  4. once on the profile for 1-2 minutes the printer back in and then install the print head and cartridges when printing invites you to.

  5. try to make a copy and let me know if the problem is still there?

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• Impossible to copy and scan on all-in-one printer, HP Deskjet F4180.

  I can't make a copy and scan on the surface of the glass of my printer HP deskjet F4180 all-in-one. The printer says: error in the copy menu and seeing red flashes on color and black. However, I am able to print from my laptop and a pop-up message would be in my laptop showing the ink cartridges (black and color) are placed incorrectly. Check the ink cartridges, both are in their right place and broken up. Need help... Please.

  I found this document which decodes what mean flashing lights.  There are a lot of different codes described, but I found a heading "question: one or two of the lights blink check print cartridge" which seems to be what's going on your printer.  Basically it's saying that the cartridges are out of alignment or defective.  If the document is not help clarify, let me know and I'll see what I can find.

• OfficeJet 6700 Premium AiO: Copy and scan simultaneously

  Good day to all,

  I was wondering if my Aio Officejet 6700 Premium E supports simultaneously copying and scanning. As I need to have a paper copy of my report in my patientfile and I also want to do a backup on my hard drive digital camera.

  Thank you in advance for your time and wisdom.

  Greetings,

  Michael

  Sorry, no.  The 6700 Officejet cannot copy and scan in a single operation, you must run the original twice now, once for the copy and one for the scan.  You can consider scanning to a file on your computer, then print this file.  This would confirm the paper copy will match the scanned document and would take only a passage from the original by the document feeder.

• Translation problem click / highlight boxes when copy and paste slides from another project

  I am baffled by this problem because it doesn't seem wise. I opened a new project to record a simulation, and when I did, I copy and paste all the slides in the section in my "Master project" If you want to. After the dough, I noticed that all of the boxes, clickboxes and highlight, I had taken the time to carefully resize were all out of wack in terms of position. Here are the best, I opened a blank project and copy and paste the same slides... this time the click and highlight boxes were in the correct position. Any ideas?

  Thanks in advance,

  Neel

  Oh, 'in position '... I see...

  The project is bigger than the other? For example, the original perhaps to 800 x 600 and the new to 850 x 650?

  Positioning can then be turned off relatively...

  Take a few elements of the sample and note their x / y positions of the properties panel, in the first draft (under 'Transform' in CP 5.5).

  After pasting in the new, note these same x / y positions.

  Is there a significant factor?

  If this is the problem, make sure that the sizes are the same, make the dough, then expand the project later (and maybe everything will keep its anchors?)

  I have not seen that happen in new versions of CP.

  You can try to check "Keep the Proportions" option in the properties of the original, just in case where this helps to "compel the position" too... guess total...

• FPGA disappear controls when copy and paste in VI

  Hello

  Strange effect here. I have a Vi that, if I try to create a new control - or copy and paste is a block of controls, the controls do not appear on the front panel - even if they are still on the block diagram.  It is a FPGA vi - but do not know if this is particularly FPGAS which is bad behave rather than the labview interface itself.  It seems that the problem may be an extreme version of the problem where the new controls are sent in the middle of nowhere on the front panel, so you copy on the block diagram - although in this case they don't seem to be anywhere - if you double-click it, and then you get taken to the empty boxes.

  Not sure if it's something to do with having a very long standing vi I was editing\adding\deleting stuff - so that somehow, he arrived at a State where he thinks the front is too full or something?  Someone at - he seen this before (and or have a solution to fix it).  It is really starting to annoy me - because as a general rule, it is best to test and develop FPGA on a separate VI stuff and then copy it to the main personality VI - but in this case, then, it kinda turns out to be a disaster.

  * I joined a project with a file in there that has reached this state of being off the coast of the façade - if someone wants to check the controls.  Basically, some controls are on the Panel before some are non-existent. NOTE: the VI itself will not do anything useful - I deleted all references to the FPGA IO etc.

  Hello

  I had a quick glance at this and at the moment the only solution I have is to copy the schema to a new VI. Once in the new Vi controls can be copied in and behave as usual.

  Unfortunately the VI has become corrupted somehow. You work with this VI a network? This can often be a problem because things get corrupted in the communication network.

• Spacing is introduced between letters when copy and paste text

  I use Adobe Reader X 10.1.1 on Windows Vista, but this problem applies to all users of Reader, that I tested it regardless of their implementation:

  
  When you open a text-under-the-page-image PDF file in Adobe Reader and then copy and paste the text, the spacing is introduced between the letters:

  For example, the word "test" shows as "t e st i ng" in the document text output, but that the 'test' on the original pdf.

  This affects 50% of the 100 000 PDF files in the collection, with between 10% and 90% of the words within those that show this phenomenon.

  The PDF files themselves are so impossible to search for the words in question.

  This does not occur when viewing and search PDF files in other viewers such as FoxIt or NitroPDF.

  Nor does occur when you use file | Save under. Text or display RTF or XML version.

  I can still reproduce this phenomenon on specific files or through the entire collection, on both my own system and with anyone else who opens PDFs in Reader.

  Any suggestions much appreciated.

  Hi André,.

  This problem is already fixed in Acrobat 11. Unfortunately, we cannot solve for Acrobat 10.

• Takes are silent when copied and pasted into the new track

  After recording several takes of a vocal part and a model gliding around how I like it, I decided to dub the voices and use another part of the (unused) takes.

  I created a new title in doubles (CMD - D) and pasted the vocal track (including), but the new double track is silent.  I can see the track and everything going out there and tried to remove plugins, copy and paste in different ways, but the track and just stay silent.  I can see them all here in the new track, and all that I can see, they should be heard.

  I tried this search anywhere online and cannot find any mention of this problem anywhere.  Is this just a bug?  I forgot something?

  What version of logic you use.

  It worked well here with 10.2.4

  Also how do you 'stick it '?

  After a screen capture of your page to organize with open mixer

• HP Officejet Pro 8600 Premium: Printer leaves black lines during copy and scan from ADF

  I know this question has been asked several times, but whenever I try to copy or scan from the automatic document feeder, it leaves black lines on the copy (with the document on the works of glass like a charm).  I've read through the forums and have tried the advice to unplug the machine and so on, but none of these suggestions work.  Any help would be appreciated.

  Hey @Huskers1,

  Welcome to the HP's Support Forum!

  I see that you have some problems with a line when copying from the document on your Officejet 8600 Premium feeder e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Get a little water and a lint cloth.
  2. Open the left upper part of the printer, where the document since the charger goes into the printer. It should open up as you opened a book.
  3. With your damp cloth wipe the rubber stamp, the rollers in the cover and the casters on the bottom of this section.
  4. Again open the left side of the printer, as you opened a book.
  5. With your damp cloth, wipe the rollers, you will find inside this section.
  6. Close the upper sections of the printer and open the flat section.
  7. With your damp cloth wipe the rollers and the white bar you see on top of the printer
  8. Clean the glass on the left side of the printer.

  Once all the pieces you cleaned dry, please let me know the results. If you remove the line, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8600: Document feeder causing vertical lines in copying and scanning

  When I copy or scan via the document feeder I get two vertical lines on the copy or scan.  How can I fix it?

  Hello @aadmin, hope you are well!

  Thank you for becoming a member of the HP Forum. It's a great place to get help from the community, to get suggestions and find what has worked for others.

  I understand that you are facing problems while scanning / copying using the ADF. Please, try the following steps to resolve this problem.

  1. Make a blank copy using the ADF. Ideally, you should get a blank document with the two vertical lines.
  2. Keep the page out on your dish / the main scanner bed facing you.
  3. Follow the line or streak on the paper to the box on the ADF glass is the origin of the problem. Carefully clean the thin "strip of lid of scanner ADF white' and 'the band glass ADF Scanner' with a damp lint cloth.
  4. See the figure below. 3 is the glass Strip ADF & 2 is the white cover ADF scanner.

  

  These measures should be the case, I would like to know the results.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!