PSC 750: elimination of printing, destroy the hard drive

Similar Questions

• Office jet pro 8500 a: elimination of printer, was this encrypted model? How to destroy the hard drive?

  This model encrypted?

  If this is not the case, how to destroy the hard drive? Where is the hard drive?

  Hi @Diane47,

  Thanks for joining the Forums of HP Support with your request to printer.

  I understand that you have a HP Officejet Pro 8500 has e-all-in-one printer you plan to elimination and you wonder if the hard disk is encrypted and how to destroy the hard drive. I would like to help with that.

  HP Officejet Pro 8500 has e-all-in-one printer don't have a hard drive. It contains a very small amout of memory, so it can keep in memory the printer and fax settings.

  You can clear the memory by restyoring the printer back to the default values.

  1. on the printer Panel, select Setup.

  2. from the Configuration menu, select Tools.

  3. on the Tools menu, select Restore Factory Defaults.

  HP offers to recycle their products for you. If you want to know more about it, please click here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Upgrade the hard drive on my HP G62-149WM for a 750 GB,

  If I upgrade the hard drive on my HP G62-149WM to a 750 GB drive (or maybe a 1 to) and use the factory purchased the set of recovery disks, it will install the recovery (hidden) on the disk partition, or not?  What IS the recovery partition, it will install (if installed)?

  Oeagleo wrote:

  If I upgrade the hard drive on my HP G62-149WM to a 750 GB drive (or maybe a 1 to) and use the factory purchased the set of recovery disks, it will install the recovery (hidden) on the disk partition, or not?  What IS the recovery partition, it will install (if installed)?

  Hello

  You can certainly move to a 750 GB 5400 RPM HARD drive, a 1 TB would also be possible, but it is not listed as a compatible hdd in a service guide. After a reset, the laptop will be in the same condition that you used for the first time (OS preinstalled). The recovery partition is going to be on the hard drive as well. Size is not too large, I think that it would be up to 15-20 GB...

• What is the best way to destroy a hard drive before discarding a computer?

  I want to protect my personal information when I have an old computer. Should I use a program to erase all data, and if so, which programs are the best. Should I also drill three holes in the hard drive? Is it effective? What are the best things to do? In addition, can I still recycle it? Please notify.

  Thanks in advance for your answer.

  LDH77

  Three holes make it almost impossible to restore (law enforcement/Govt can)

• I downloaded a one year membership on the creative cloud in last August. The hard drive on my computer just died and I had to have the computer destroyed hole. The creative cloud is no longer on my computer and I don't know how to re - download. I need

  I have a one year membership in the creative cloud. The computer, on which I had downloaded had a problem with the hard drive and that I must have wiped out whole computer. I now need help re - download the creative cloud.

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• To access the files and folders from the hard drive Windows 7 on Windows XP, access denied error message.

  Original title: portable destroyed - need for car access

  I don't know if this is the right forum - please advice if it is not.

  My friend's laptop computer was destroyed in a car accident. I pulled the drive and placed it in my desktop XP system and the drive appear in good health. However, I received permission issues trying to access records on the disk and thought that it was because of me using Win XP and the laptop was Win7x64. My questions below are based on the assumption that I'm not able to access these files on my Win XP system. If this assumption is incorrect, so please let me know.

  I have a laptop that I don't use and put the disk in it. I was hoping it would be plug and play all the new material, but after reading a little online, I know that this is not the best thing to do and will probably not work as did the earlier versions of Windows.

  In the end, I care retrieves the contents of the disc, although it would be great if I could lend my laptop for a few weeks with "its files" until it sorts how to replace the laptop.

  Can I get the player Win7x64 working on the laptop computer of replacement by reinstalling Win7x64 on this laptop? I'm not "means a clean install/reformat, but have rather the Setup program detects an existing installation, and do its magic to get the operating system runs on new hardware?"

  I know that this raises questions of MS licenses. If the installation process could get his old system running on the laptop replacement, if I have a small window of time completely to access his files before being forced to re-register the OS? I'm hoping so.

  I'm looking for only a short-term solution - I do not recommend that he hopes that drive long term because the laptop got quite truncated of the accident, and once he gets a new laptop it will have everything he needs on this subject (OS, licenses, etc.). If I have a small window of time where I can simply copy their important files, or to lend him my laptop with its player and him can bring to its domestic network and the print out of all the things that are important, that it's going to be all together to move them to a new laptop when it is available.

  Thank you

  Hello

  You experience this problem because of the permissions applied to these s folder.  To resolve this problem, you will need to take ownership of these files and folders.

  Method 1: You can follow the steps mentioned in the link below to take possession of the records

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  (Article above applies to Windows Vista, not valid for Windows XP)

  Also check out the article below

  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421

  Method 2:  You can try a custom installation (not a format\clean facility).

  See the link below for custom installation
  using the install option custom without formatting the hard drive

  Note: In custom installation only data would be transferred in Windows. Drivers, applications and the old folder will need to be reinstalled.

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• Tecra S10-106 does not see the HARD drive 1000GO

  Hello

  I bought a 1000MB HARD disk and build in on a TECRA S10-106.
  The HARD drive was not identified.

  Do you have an answer why?

  Thank you for the help

  Hello

  He recognized the HARD drive in the BIOS?
  If not, then possibly the BIOS can't handle this HARD drive because of the size
  Try a 500 GB or 750 GB 2.5 HDD

• Upgrade the HARD drive to SSD

  So in late 2014 I bought Macbook pro 2014 that contains one of the latest computers in this line in order to start the HARD drive. The other day my HD crashed and I need to buy a new one that would give me the opportunity to upgrade to an SSD. What would exactly be the best SSD replacement that would work well with my computer? All I really want is something that will work well with the macbook, I have now.

  That's the one I was thinking about buying, but I just wanted another opinion http://www.amazon.com/Seagate-Gaming-2-5-Inch-Internal-ST500LM000/dp/B00B99JU5M? ie = UTF8 & PSC = 1 & redirect = true & ref_ = ox_sc_a...

  The product you have listed will work fine on your macbook pro. But you must be aware that the hard disk you have in mind is NOT pure SSD,.

  It is a 'hybrid' SSD + HDD, it is much cheaper than a 500GB SSD habit. for example, the samsung EVO 850 costs $150.

  The hybrid approach basically means a great 'flash memory' (in seagate device is 8 GB) is built into the hard drive.

  and smart algorithms runs in this regard to cache your files frequently used in this flash memory is faster than a traditional HARD drive.

  It is still until you think is best for you.

• Portege R200 - how to replace the HARD drive

  Fundamental questions about the Toshiba Portege R200 (purchased model birthday Thailand August 2005) are:
  (1) Please provide instructions to remove the hard drive (non-functional) (illustrations if possible)
  (2) model has enough space inside for hard drive 2.5 inch? (Impossible to locate 1.8 inches and below, to get the results of [expensive] calls to Toshiba - of interest only)

  Background:
  (1) while 3 years warranty in force I trecked (expensive) of Malaysia in Bangok (where to buy) at the headquarters of Toshiba (if you know Bangkok taxi drivers, you'll know what a test or going around in circles and the nonsense in the fire that was)... Toshiba agreed HD vibrating but reported would take 3 to 10 weeks to get the HD replacement (!?)
  (2) I was a few weeks later to the r - u (to tie)... They told me they couldn't help; I "should contact my provider...". This is an Asian model, in Europe, we cannot... etc etc.
  (3) a week later the HD has no
  (4) I contacted Toshiba but they told me the warranty expired 7 days before...
  (5) since this time I phoned and was put on hold for Toshiba in the region of London (several times), Singapore (3 times), Thailand (well, if you know how it goes, say-no more, shots of elbow-boost)...

  I got nowhere. But were invited by the media to bring it to the headquarters of Thai (yet)... It's all right, I'll book a flight and hotel etc now, shouldn't cost all that much more than the computer cost me initially...

  Oh, another thing, not very important: to help out me, I bought a lighter machine at Toys R us... 300 quid... for the love of antiquity I always want to get the old dog to this shiny Silver Anniversary edition slim R200 works again...
  I have a 2.5 "HD available (recond and costs all 9 quid in Brummagem) but before I destroy the old R200 dog by ineptitude... (and lost to carefree annoyance no assistance of Toshiba)... and/or on how to remove HD, please?

  Hello

  I have seen words about your question.
  AFAIK the R200 was equipped with the utility of the HARD disk protection. It is a feature to reduce the risk of damage to the HARD disk.
  Using the acceleration sensor built into the computer drive HARD protection detect vibrations, shocks and sings in the computer and automatically moves the HDD Head somewhere course, in order to reduce the risk of damage.
  But this function does not ensure that the HARD drive will not damage! It reduces the risk of damage!

  However, the HARD drive can be removed very easily.
  At the bottom of the unit, you will find the HARD drive Bay. It s close to the battery (on the left).
  You need to remove two screws to get access to the HARD disk 1.8.

  PS: You can use disks hard only 1.8. The 2.5 hard drives are not compatible.
  I discovered that you can use a TOSHIBA 60GB 4,200 rpm 1.8 HDD HDD1544BZK01

  Welcome them

• Toshiba Satellite L50-B-1DJ does not supply power to the top after removing the HARD drive

  Hello world!

  I have a Toshiba Satellite L50-B-1DJ. It has a 750 GB HARD drive, but it wasn't enough for me. So I bought a Toshiba 1 TB HARD drive. I have undone all the screws, carefully (using my driver's license), lifted up the plastic and removed a HARD disk.

  BTW, I really like this plastic solution on the HARD drive!

  Then I realized, that all my stuff is still on it.
  So I put the HARD drive, I'm going to copy everything on my drive hard Ext. planning.
  Well I screwed it back, got the battery, put the back of the AC adapter.

  Battery charge light was on, indicating that the current flows. I pressed the 'Start' button, and nothing happened. He broke yet still nothing. I plugged the battery and the AC output adapter, I held the Power button for 30 seconds, put everything back still nothing. I got scared. Opened back once more, just to take a look at, so anything that slipped on. Nope.

  Everything is a okay. What should do? I have the warranty? I hope not.
  Can I fix myself without void my warranty? I hope so!

  And also: I bought the laptop in Hungary, but I'm in Germany. Can I fix here in case my warranty is valid?

  Thank you very much for your help!

  Sincerely,
  Bertold Juhasz

  PS: As you say that English is not my native language, please don't flip out on my grammar I know it's wrong

  I just took the hard drive out of mine and put it back to see if I could reproduce your problem after trying several times I had no problem.
  Have you checked the pins at the end of the hard drive to see if all are damaged, another that I can't imagine what else.

  ICH habe just die Fliegengitter aus von mir gemacht und wieder, um zu sehen, ob ich das problem nach dem Versuch're mehrmals I had keine zu make a replication problem.
  Haben Sie die pins am Ende der Tiger uberpruft, um zu sehen, wenn eine beschadigt sind, dass ich nicht, except a great denken nichts.

• How much better the partition of the HARD drive for dual boot: Windows 8 and Linux

  Hello

  I am a newbie in Windows 8, linux, Partition...

  I want to use my new laptop with windows 8 pre-installed on the following:

  Create a Dual Boot Windows 8 / Ubuntu
  Create on my drive C (single disk on my laptop):

  * a partition for the system
  * one for Windows 8
  * one for data and
  least for Ubuntu OS

  My goal is:

  -to install VmWare on Windows 8 and run Splat Checkpoint with virtual machines to make the FCTC laboratories.

  to install GNS3 on Ubuntu for CCNP Labs but with GNS3 to access the files in the data partition

  I have a Toshiba Satellite with 750 GB and 8 GB of RAM.

  According to you, what is the best size for my scores?
  Is there a better way to partition my C drive on my goal?

  Best regards

  I don't know if this is the right section, sorry for that. Feel free to move this thread in the appropriate section *.

  I think the size of partitions depends of the you want to use and install other software.
  So if you have a lot of software which runs under the Windows System I recommend to choose a larger size to win 8 partition.

  However, given that you have a 750 GB HARD drive, you could take 200GB for Win 8, 100 GB to Linux and the rest of the HARD drive size, that you can use for data.

  By the way: I found Nice YouTube video how to create a dual boot using 8 Win and Linux http://www.youtube.com/watch?v=E_Yd2jK-7Jg

  Welcome them

• Re: Tecra A9 - 11M - replace the HARD drive with a larger

  I have a Tecra A9 - 11 M with Windows XP Professional installed. I would like to replace the hard drive with a larger drive and install Windows 7 Professional.

  Any suggestions on recommended records say 500 MB?

  Difficulties to install Windows 7 on this model?

  Hey,.

  > Any suggestions on recommended records say 500 MB?
  I assume you mean 500 GB and not 500MB, right? ;)

  Well, the Tecra A9 already supports SATA interface and there is no limit of capacity on SATA interface, so you can install a 500 GB HARD drive or more (750 GB, etc.). Just make sure that it s 2.5 SATA HDD.

  You can choose each brand of HARD drive because each model will not work. You can buy a Toshiba HDD, Western Digital HARD drive or another. No problem ;)

• Replacement for the hard drive LZ460EA

  I would like to know what kind of hard drive is compatible with the model LZ460EA. It came with that is probably damaged as the hard disk check gives me error 303 and 305 so I plan to replace

  Hello

  Your computer is listed as coming with a 500 GB hard drive, but you can also easily install a 750 GB HARD drive if you want a little more space - readers at the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 70 of your maintenance & Service Guide.

  Kind regards

  DP - K

• Replacing the hard drive for HP ENVY 14 laptop

  Hello

  I have a HP ENVY 14-1150ca Notebook PC with a SAMSUNG HM640JJ hard drive, Windows 7 service pack 1.  I ran diagnostics from the system at boot upward and got a "DST short": message failed.  Failure ID: RGDX02-5KC73T-XD6V4J-60RE03. Product ID: XG981UA #ABC.

  Can anyone suggest that a replacement of the hard disk that I can order, or something similar or somewhat larger is fine.

  Thank you

  Suzanne

  Only the hard drive model is a 640 GB drive.  I think that you can easily use a 750 GB drive with no problem, in my humble OPINION.  Depnding the merchant of your choice, Amazon - here are a few choice.  Or Newegg, HEREare good examples.