Pse 14 installation error message... DWo21: payload not supported versions are included...

Similar Questions

• I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  The upgrade from Vista to Windows 7

  I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  Have you tried to do an upgrade installation or a custom installation?  A custom installation requires you to back up your files and settings with Windows Easy Transfer and then reinstall everything after installing the new.  If an update install does not install work, you need to do a custom.

  In addition, a Windows 7 Anytime Upgrade will not work and you get a message from a platform if you have bought a UA and tried to use it with Vista.  Vista upgrade requires a detail, a copy in the Windows 7 box.

• Lightroom 6 disk installation, error message Vista is not taken in charge - but I use Windows 7.1

  Installing the drive that I just received from Amazon, restarted computer several times.  Had other error messages (not would install, not genuine software), but it is moved to "Windows Vista is not supported.  I am running Windows 7.1

  See install OS bad detection

• Impossible to reinstall Lightroom 6 retail DVD.  Gives the error message "Windows Vista not supported."

  After a horrible experience with the upgrade of Windows 10, I re-installed Windows 7 Pro and had to reinstall all my programs.  When I try to install the retail DVD of Lightroom 6 version, I got and error message that Lightroom does not support the Vista operating system.  This is NOT Vista; It is Windows 7 Pro x 64 SP with installed updates.  Installation stops there and will not continue!  I then reinstalled my old version of Lightroom 5.2 (who has updated to 5.7) without problem.  How can I bypass the installation process that incorrectly detects Vista?

  Thanks for any help you might be able to give me.  I really miss my 6 LR!

  Hello

  Try to force ambient light Setup to run in Windows 7 mode:

  Right-click on the Setup file and select Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

  This link can also help: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported

• HP Probook 4530 s: Error Message 'wireless module not supported 702.

  I have a HP Probook 4530 s standard stock I had since then and all of a sudden in the last month it comes up with this error at startup "this wireless module is not supported then was disabled 702. I have not changed a thing since I've owned this laptop so I use the card wireless that put HP. I can occcasionally work around (reboot several times) but it is very frustrating, especially when I want to get something done quickly and I have to plan restarting, disconnect the battery etc. game. Is there a solution? I was looking for a solution. As I understand it there is an error with the BIOS and the wireless card is not on the whitelist. Which is ridiculous because it is what came with the laptop!

  Any ideas or suggestions?

  There is a update the BIOS of your system as dated March 2015 [F.60 Rev.A]

  Although it does not specifically address your problem, it may be useful and HP 'recommend' the update.

• Website widget OTA Installation error 'media type is not supported.

  Hello

  I copied the .jad & .cod files on server. When I access .jad files he claims donwload & said this media type is not supported. We need to copy any additional files to this place?

  In a forum, they said adding the .htaccess file that contains the text below.

  AddType text/vnd.sun.j2me.app-descriptor .jad
  AddType application/vnd.rim.cod .cod

  This file is required for installing an application OTA?

  This error indicates that the necessary MIME types have not been configured on your web server.  You are on the right track for a solution.  This article describes the types needed.

  MIME types required for a web server use BlackBerry smartphone applications

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/the-required-MIME-types-for-a-Web-Serv...

• I want to install Lightroom 6 on a Windows 7 operating system. I get the error message Windows Vista not supported. How to spend it?

  I've seen comments on this more soon but I can't find the discussion now.

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

• I tried to do a backup on a disk (a flash drive to be exact) on my computer and im getting the error message "demand is not supported load 0 x 80070032" what should I do? I have

  I went into the backup from the control panel and its saying that no replacement has been set up... I tried several times, just to be sure that I had set up the backup on my computer before and it worked very well, I don't know what else to do... help

  Hello
  All changes made to the computer before the show?
  Method 1:
  Run the tool on your computer system file checker. You can check the link that will give you information on how to use the System File Checker tool to fix system files missing or corrupted on Windows Vista or Windows 7 below:
  http://support.Microsoft.com/kb/929833

  Method 2:
  Run a check disk on the computer. Follow the steps.
  1. Select command prompt.
  2. type chkdsk/r (note: there is a space after chkdsk)
  3. restart the computer and allow to run the disk check.

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

• Error message 'setenv.ini' not found during installation

  I want to install the XP Pro version of the cd but I get the error message "setenv.ini" not found

  Hello

  This occurs if you install Windows from the Microsoft or Toshiba Recovery disk?
  In addition, it would be interesting to know what laptop you have.

  The disc is maybe scratchy check it!

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Samsung Gravity S II - installation error: "CDC series is not installed."

  Original title: hardware device (Samsung Gravity S II

  I bought this smartphone and I tried to connect it to my computer. A message appears saying that the pilot for the series of the CDC is not installed. How can I do that I can synchronize my Galaxy S II?

  Samsung Gravity S II - installation error: "CDC series is not installed."

  You install the sync software that comes with the "phone.  The PC recognizes the "phone and the synchronization software will be running on the computer in order to allow the synchronization."

• Error messages - rundll does not - occurs on my new Equium

  I have a new computer satellite phone on Vista - about 4 weeks - and I get the error messages: rundll is not working, Windows graphical desktop does not work.

  Should I return to the retailer or ask for help on this site?

  Help appreciated - thank you.

  Before contacting the retailer I recommend you to use recovery media supplied and reinstall the OS. I hope once this laptop will work fine as before.

• Error message D: / / is not accessible on the Satellite L series

  Problems loading dvd write error message D: / / is not accessible. Cannot find help in the user manual.

  Is there something I am doing wrong? Do I need to load different drivers?
  I have tried DVD-R & DVD + R discs.

  Hello guys

  For me, it's stupid enough to write about the problem and not write what model of laptop you have. You have new models of laptops or some oldies? Do you use CD/DVD burning applications and which?

  Please try to start the recovery procedure to see if the drive can read the recovery media. Please post the results.

• error message: "windows could not find a certificate to connect to the network.

  My NetGear wireless icon shows this error message "windows could not find a certificate to connect to the network.

  Hello

  Did you change your computer before this problem?

  You can follow the procedure in the article.

  Unable to connect to the network: Validation and certificate in Windows XP and Vista errors

  http://KB.NETGEAR.com/app/answers/detail/A_ID/7334/~/unable-to-connect-to-network%3A-validation-and-certificate-errors-in-Windows-XP

  Alternatively, you can contact Netgear support to improve assistance in this regard.

  Welcome to the NETGEAR support

  http://support.NETGEAR.com/

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: &#60; root windows &#62; \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.