PSG on 2821 rejected by CUCM 9.1

Similar Questions

• Design of CPU: cucm + remote site

  Hi all

  Now, our company have a HQ Office and a remote site in a different city and we have a CUCM 5.1.3 server in the HQ Office, remote site have approximately 30 cisco 7911 phones registered to the HQ CUCM server. HQ and remote control have their own local voice gateway 2821 h323 (HQ has a PVDM2-64 in VG, remote control has a PVDM2-32 in VG) HQ and distance of telephone calls using the G729 codec to save bandwidth (there is a line of rental of 2 M between the seat and the remote site).

  My question is: HQ Office take often together 8 partners (using MeetMe), because we have no meeting place, server or other device cisco PVDM2 only, so I have to renounce material use CFB, but software CFB support only of the G711 codec and the QUEUE to the HQ router do support G711, if I keep using G729 between Headquarters and remote site Remote staff can not dial a MeetMe meeting and cannot get their voicemail.  Who can tell me what is the best design for my CPU?

  

  Hello

  Throw on this diagram.

  Figure 2-14 centralized resources for media in: -.

  http://www.Cisco.com/en/us/solutions/ns340/ns414/ns742/ns656/net_design_guidance0900aecd80488134.PDF

  The transcoder on CUCM site should be in the MRGLs for phones ip at the remote site.

  HTH

  Alex

  Please note the useful messages

• Using the Codec C90 Tandberg T1 with CUCM

  Hi all

  is it possible to register the Codec C90 a Tandberg T1 to the CUCM?

  We are currently trying to save one, but the State of the record is still "failed: 485 ambiguous." The CUCM tells us that the record is rejected. Is it possible that the problem is the product ID, which is "Cisco Telepresence T1". We can only select C90 Cisco CUCM on. If it does not, and the device is rejected.

  Is there a way to fix this? Perhaps saying the C90 is therefore more a T1? We have already tried to remove all optionkeys, but there is a 'unknown' type which cannot be deleted. Could this be the key T1?

  I hope good answers :)

  Kind regards

  Jannik

  Looking at the matrix unit CUCM package compatibility, TANDBERG T Series end points are not supported, IE: are not.

  If you do not want to use the codec C90 T1 of the TANDBERG itself and not the Q1 as a whole, you may be able to change the product key for the T1 be a C90 asking new license keys.  See t3-c90-codecs.

• Problem with a SIP Trunk between VCS and CUCM

  Hello world

  I created a SIP Trunk between control VCS (X7.1) and a CUCM 8.6.

  I followed this Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7 - 0.pdf deployment guide.

  The trunk is in place, but I have the following problem: I can ring since an EX90 recorded on the VCS for a registered on the CUCM 9951 but when I take the call, I have a busy signals (audio and video). When I on the EX90 9951 ring, I have the following message on VC: can not reach the contact.

  I have a 503 service unavailable status on the call history and "call rejected" on the event log.

  My transformation is OK and the call is sent to my neighbor CUCM zone

  You have an idea to solve this problem?

  Thanks for your help

  Best regards

  Bruno Z.

  Hello

  Yes, it's true! It seems at first glance a problem with codec negotiation when I see the reason 47 code.

  in any case set the region to G.711 trunk phone in case if you have different device pool and the trunk region and ip-phones.

  make G.711 end to end and test again.

  Thank you

  Alok

• CUCM VCS question

  Hello

  have a problem with the composition of CUCM to VCS (7.1). The girl scout way works fine.

  I played with the rules of search and transformations, but it won't work. The terminal on VCS is a SIP device.

  Here is the log:

  "21 sep 11:14:26 tvcs: event ="Call rejected"Service ="SIP"Src - ip ="10.234.40.5"Src-port = '5060' type-aliases-Src = Src-alias"SIP"=" sip:[email protected] "/ * /" Dst-alias-type = "SIP" Dst-alias = "sip:[email protected]/ * /: 5060" Call-serial-number="bdb3272c-03cc-11e2-bef9-0010f3249b3a" Tag = "bdb32808-03cc-11e2-bbef-0010f3249b3a" detail = 'Not found' Protocol = "TCP" response code "404" = Level = '1' elements UTCTime = "2012-09-21 09:14:26, 549"

  "" "21 sep 11:14:26 tvcs: event ="Research Service completed "="SIP"type-aliases-Src = Src-alias"SIP"="[email protected]/ * / "Dst-alias-type ="SIP"Dst-alias =" sip:[email protected]/ * /: 5060 "Call-serial-number="bdb3272c-03cc-11e2-bef9-0010f3249b3a "Tag ="bdb32808-03cc-11e2-bbef-0010f3249b3a" detail =" "found: FAKE, searchtype:INVITE ' Level = '1' elements UTCTime ="2012-09-21 09:14:26, 549"

  "Sep 21 11:14:26 tvcs: Event = Service of" attempt of call "="SIP"Src - ip ="10.234.40.5"Src-port = '5060' CBC-alias-type = Src-alias"SIP"=" sip:[email protected] "/ * /" Dst-alias-type = Dst-alias "SIP" = "sip:[email protected]/ * /: 5060" Call-serial-number="bdb3272c-03cc-11e2-bef9-0010f3249b3a" Tag = "bdb32808-03cc-11e2-bbef-0010f3249b3a" Protocol = "TCP" Auth = "" level = '1' elements UTCTime = "2012-09-21 09:14:26, 539"

  "" "21 sep 11:14:26 tvcs: event ="Attempt to search"Service ="SIP"type-aliases-Src = Src-alias"SIP"="[email protected]/ * / "Dst-alias-type ="SIP"Dst-alias =" sip:[email protected]/ * /: 5060 "Call-serial-number="bdb3272c-03cc-11e2-bef9-0010f3249b3a "Tag ="bdb32808-03cc-11e2-bbef-0010f3249b3a"details ="searchtype:INVITE"level ="1"elements UTCTime =" 2012-09-21 09:14:26, 539 "

  Could someone help?

  Concerning

  Jason

  Jason,

  the desitnation is coming as "[email protected]/ * /: 5060" and intellectual property should be 10.224.35.249.

  What to change here, it's changing the rule search.

  No source

  Regex (. *) @10.224.35.249 ((:|;). *)?

  replace action

  chain-[email protected]/ * /.

  the SIP AOR is [email protected]/ * / so I think it should work after the chnges to find the rule.

  Rgds,

  Alok

• Endpoint of telepresence registering on CUCM by motorway from the Internet

  Hi guys,.

  I have a question - how to correctly register telepresence endpoint (I SX10, 20, 80) on pit CUCM Expressway on the Internet?
  I found a following document - http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/administering-endpoints-running-tc72-on-ucm1051.pdf, guide on p.48 there, but it did not work. and I don't have any after such configuration event log.

  If the change other options in SX20 as "Profile SIP" and "Proxy", I get the following errors:

  2015 04-10 T 17: 30:04 + 03:00	"" "" "TVCS: event ="rejected registration"reason ="unknown"Service ="SIP"Src - ip ="213.108.78.215"Src-port ="48150"Protocol ="TCP"AOR ="sip:mydomain.com"Contact ="; + sip.instance\ ="" "duration ="3600"Level ="1"elements UTCTime ='2015-04-10 14:30:04, 698"
  2015 04-10 T 17: 30:04 + 03:00	"" "" "TVCS: event ="applied for registration"Service ="SIP"Src - ip ="213.108.78.215"Src-port ="48150"Protocol ="TCP"AOR ="sip:mydomain.com"Contact = '; + sip.instance\ =""" "duration ="3600"Level ="1"elements UTCTime = '2015-04-10 14:30:04, 698" "

  I can register successfully on CUCM with Jabber for Windows and Android via the highway but not SX20.

  are there any other document or guide describing how to configure the SX series in such cases? or someone who had these lab or deployment?

  Thank you!

  Take a look at the Guide deployment of MRA, to check what you have done and set up all the pieces.  Looks like you're missing the SIP domain on the highway, see "setting up the Expressway-C" on pg 20.

• How can you tell if a PSG has been included in a call?

  Is there an easy way to tell if a PSG is inserted in a call? Maybe something in the CDR? The destination IP address appears as CUCM, or IP address of the device called?

  I use CUCM 10.5

  Thank you, Tim

  The other thing to do (if it's a phone) is, know what resource PSG 'could' be invoked, from the media resource of the unit group, get the IP address of the resource and make a note of it.

  Make a call to the phone in question, go to the IP address of the phone and click on "stream1", keeping the open call, check what remote IP address, the call is goung to... If we use of the PSG, it should show the IP address f the resource of PSG.

• Support of the software will not enroll in CUCM 9.0

  Deployment of a test with license demo installed on CUCM 9.0 (9.0.0.99101 - 22). PSG, CFB, ANN and MOH will be not. Cisco IP Media Streaming Voice App is running.

  Disabled/enabled/restarted services, server rebooted, no change. Newspapers using RTMT tire and it shows an error of license, but ELM server licensed.

  Any ideas?

  14:10:27.046 HDR | VoiceStrm, StandAloneCluster, 10.x.x.x, Error, 9.0.0.99101 11/12/2012-22
  14:10:27.046 |   PITrace: * ERROR * [CHRISTIANE INFO]: platform install api isDeployedStandalone() = true
  14:10:27.046 |   PITrace: * ERROR * [CHRISTIANE INFO]: platform install prods api [0] = CallManager
  14:10:27.046 |   PITrace: * ERROR * [CHRISTIANE INFO]: Configuration platform of the box: 0 (CCM:0, UNIT: 1, carrots: 2, unknown: 3).
  14:10:27.046 |   PITrace: * ERROR * Important info only, category [DBMon]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.046 |   PITrace: * ERROR * Important info only, category [Cisco Tomcat]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.046 |   PITrace: * ERROR * Important info only, category [CallManager]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.047 |   PITrace: * ERROR * Important info only, category [LBM]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.047 |   PITrace: * ERROR * Important info only, category [CmiManager]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.047 |   PITrace: * ERROR * Important info only, category [CtiManager]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.047 |   PITrace: * ERROR * Important info only, category [Cisco Media Streaming App]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.047 |   PITrace: * ERROR * Important info only, category [CiscoEM]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.047 |   PITrace: * ERROR * Important info only, category [CiscoWebdialer]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.047 |   PITrace: * ERROR * Important info only, category [CiscoIPMA]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.047 |   PITrace: * ERROR * Important info only, category [DRIVE]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.047 |   PITrace: * ERROR * Important info only, category [Cisco TFTP]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.047 |   PITrace: * ERROR * Important info only, category [CiscoAXLWebService]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.047 |   PITrace: * ERROR * Important info only, category [RISSystemAccess]: productid_enable_flag = 1 system_enable_flag = 1
  14:10:27.047 |   PITrace: * ERROR * [IMPORTANT INFO] AppCrashCheckBase::AppCrashCheckBase() is the RW_Process_Mutex: / dev/shm/Category_CiscoMediaStreamingApp_Mutex_crash_checker

  14:10:27.047 |   PITrace: * ERROR * [IMPORTANT INFO] AppCrashCheckBase::AppCrashCheckBase() acquire the successful lock. : errno = 0; strerr = success
  14:10:27.047 |   PITrace: * ERROR * [INFO] WriterSideCheck () open IMPORTANT existing flag_check_mmf to the left of the final run. : errno = 17; strerr = the file exists
  14:10:27.047 |   PITrace: * ERROR * [IMPORTANT INFO] ExAppCrashCheck::WriterSideCheck() create/open flag_check_mmf succeeded! : errno = 17; strerr = the file exists
  14:10:27.047 |   PITrace: * ERROR * {Debug information}: look on the side of the writer, writer crashed last time: true
  14:10:27.047 |   PITrace: * ERROR * CPICategory::loadXmlFile() category: xmlfile [Cisco Media Streaming App]: [/ usr/local/cm/conf/MediaAppPerfmon.xml]
  14:10:27.049 |   PITrace: * file ERROR * CPIClass::createMMF() MMF: [/ Category_CiscoMediaStreamingApp_PIClass_MEDIAAPP_GLOBAL_OBJECT_MDB] is started. (no error)
  14:10:27.049 |   PITrace: * ERROR * ExObjectUpdateTracker::ExObjectUpdateTracker::_synchronizeMAP() m_nIndex m_nRoundCount: 0 m_nTick: 0
  14:10:27.049 |   PITrace: * ERROR * [IMPORTANT INFO] name of the category: Cisco Media Streaming App file: /usr/local/cm/conf/MediaAppPerfmon.xml enbled_flag: 1
  14:10:27.049 |   PITrace: * ERROR * [IMPORTANT INFO] Add ITraceObj to the name of the category: Cisco Media Streaming App, tid:1306 l
  14:10:27.049 |   PITrace: * ERROR * [IMPORTANT]: statsInit() enable_flag = 1
  14:10:32.180 |   CIpVMSMgr::MgrThreadProc * ERROR * No valid license found
  14:11:32.192 |   CIpVMSMgr::MgrThreadProc * ERROR * No valid license found

  Thank you!

  Hi hhbalfour,

  First of all, don't know why you use an intermediate version of 9.0. You must use a version of FCS such as 9.0.1.10000 - 37. Second, it looks like this are IPVMSA newspapers that you shot? There is an internal fault for the errors you see:

  CSCtz44498    Characteristic SW license no longer exists in Kirra 9.0

  Symptom: MOH serves not registered. No Conf Brodge. Conditions: Fresh INstall Only. Workaround: N/A (the fix - the check for the SW Feature license needs to be removed) 

  Fixed in versions:

  009.000 (001.10000.037)

  009.000 (000.99121.003)

  I suggest you to install 9.0.1.10000 - 37 who should have a fix for this problem.

  HTH.

  Kind regards
  Stefano.

• Cannot reject the notification - reminders

  I shared a list of reminders and received three notifications on action - strangely one of the calendar. I managed to dismiss both of them, but we refuse to be rejected and is still there on my lock screen now. Sliding right and selecting Clear do nothing. I removed the part and removed from the list - the notification is still there. Suggestions would be appreciated before resetting the phone.

  Hello Solidgone101,

  Thank you for using communities Support from Apple. I know have a problem with notifications and reminders, it's not what you expect. The good news are the following steps will help to solve your problem and get your iPhone working properly again!

  1 turn off reminders in settings > iCloud and then restart your device under the tap down and starting process is important to keep the iOS software works correctly. Turn reminders and test your question.

  Restart your iPhone, iPad or iPod touch

  2. the next step is to make a backup of your personal data, and reset all settings settings > general > reset your device. This resets all settings on your device as a background screen, sounds, display & brightness, background App Refresh, Date and time and removes all of your previously used passwords and Wi - Fi networks.

  The backup of your iPhone, iPad and iPod touch
  Import photos and videos from your iPhone, iPad or iPod touch
  Reset the settings of the iPhone - iPhone user Guide

  See you soon!

• The automated help site rejects my extreme SN.

  The automated help site rejects my extreme SN.  Embarrassing.  Has anyone else had this experience

  < re-titled by host >

  do not post your email.

  your question is vague to the point that the answer is to ask the developers of the Web site.

• Reject incoming calls on ios 10 not listed is not on the lock screen (Notification)

  Reject incoming calls when the phone is locked by pressing the power button / stop on ios 10 that the same call does not appear on the lock screen or (Notification) as a reminder...

  N ° it will not. He never has. you will see a missed call notification if you miss the call. If you actively reject the call, you don't have to Miss it. Access your recent calls list and call back them was from there.

• I no longer buy with my credit card! Me says "rejected payment method.

  Hello

  I can't buy apps and games with my Visa card. Says "rejected payment mode" and I don't have ANY other means of payment.

  Please do the necessary as quickly as possible!

  Thank you mauruuru.

  To solve your problem with your credit card you will have to talk to your bank.

• Reject calls

  Hello I have an iphone with ios 9.3.4 SE and I make my phone automatically reject calls.

  I need to be free to be called from the numbers, but I need to automatically hang up on others.

  I didn't need it is silent because the phone which is care.

  y at - it an application that I can buy or something I can do?

  Contact info from the person you do not want to receive calls from.

  Scroll down and select "block this caller.

• Suddenly cannot send mail. Message 4.7.1: Recipient address rejected: rejection policy - your host has been blacklisted for e-mail abuse.

  When I try to send a message an error box apperars:

  An error occurred while sending mail. The mail server responded:
  4.7.1 < ***@***.com >: recipient address rejected: rejection policy - your host has been blacklisted for e-mail abuse. Please configure your email client to use authentication SASL - contact support if in doubt how...

  Please check the message recipient "*********@******.com" and try again.
  

  This happened while I was sending about #3 4 or 5 that I must send. Nothing I know has been changed has been changed! I have downloaded the latest version while I was in the program.

  This seems to be a message from a server. The word 'host' is not clear to me. In the language of networking, it can mean your own computer, but more generally, it could mean your ISP provider or by e-mail.

  Anyway, this means that something has decided that you are, or are on a network that has been identified as a source of spam. I suggest that ask you this from your ISP.

• Why are my electronic rejected by Qwest for Spam and not by another server, is here as a setting on Thunderbird cause?

  The problem seems to come and go. I can send messages to a single person on its Gmail account and the same message gets rejected by their account of Qwest.

  You will need to ask for century link why they treat your mail as SPAM. We could guess day and not hit their magic formula.