PSR 527W - external WAN ping port

Similar Questions

• How can I find my external and internal port number

  I am trying to access the internet via a live ethernet cable from my router, except the computer im trying to use is new to the House, but is under xp. I also have a laptop which I use to ask these questions, which accesses the internet via a wireless connection. I open 'Internet Properties' and entered my IP address and I am now looking for my external and internal port numbers try to connect. Is it and most easy way? I'm on the right track? Help, please. :)

  If you really have a router, then this router should affect your computer all the configuration settings that it needs to connect to the internet (or local) automatically via DHCP.  The "TCP/IP properties" correct settings on your computer must be set to "Obtain an IP address automatically" and "Obtain DNS server address automatically".  If your router is configured correctly, it will automatically load these settings, such as all you need to do is to connect your computer to your router.  If this does not work, then you must download the manual of your router and verify its configuration.

  HTH,
  JW

• External hard drive Ports

  I have and with USB 2.0 ports, Firewire 400/800 and eSATA external hard drive older. What is the best yet inexpensive way to connect it to my new Mac Mini?

  Use a USB port on the Mac Mini.

  Use of FW you would need to buy a bolt of lightning > adopter FW

• Satellite U300 - 13 M - port external monitor (VGA port) does not work

  Dear users of Forums from Toshiba,

  I have a problem with the VGA port. I use the Windows XP operating system. Laptop, do not display on an external monitor, I tried all monitors to connect to my office, but does not solve this problem. I also tried to reinstall Windows XP, once again, and nothing has changed.

  Please help me.

  Best regards, Elbrus

  Hello

  I guess that by Satellite U300 came preinstalled with Vista. Am I right about that?
  Anyway, if you want to use external monitor and switch successfully to him you must install the utilities and tools of Toshiba. There are several of them and allows you to use the FN + F5 key combination and move your desktop to laptop LCD display to the external monitor.

  Can you please tell me one thing: have you installed all the stuff of the Toshiba download page according to document Instructions of facilities?
  The configuration of the laptop is not known to me, but try please check the Intel properties and let me know if the external monitor is recognized in properties. Usually, you can choose to use the external monitor there.

  You can also start Toshiba HWsetup utility. There must be tab display. There you can also find an option to use the LCD screen + monitor at startup.

  Check it out please and post the results.

• WAN PING

  Hello!

  I need to be able to ping the interface wan sonciwall NSA E5600 from a single IP address on the internet. If anyone can help?

  Thank you.

  My English is not very good but I'll try to explain.

  Go to Network Edition - Interfaces, the WAN interface and select ' management: Ping.

  This will create an automatic firewall rule to allow ANY source Ping to the WAN interface.

  Just go to the rules of firewall (from WAN to WAN) this rule and select Edit 'Source' to change the "ANY" to the only address on the Internet you want to. You will need create an address for the desired source IP address object.

  Greetings,

  Jasiel

• Cannot ping port host MD3000i on RC0

  Hello

  I have set up my iSCSI network, as suggested in this post:

  http://en.community.Dell.com/TechCenter/storage/w/wiki/MPIO-to-PowerVault-MD3000i-with-Microsoft-iSCSI-initiator.aspx

  I can only ping the ports of controller RAID 1 (two ports). All of my iSCSI traffic is drunk through the controller. Windows Server 2008R2 (R710/810), but also an ESXi 4.1 cluster (R610 and PE2950) access the dedicated iSCSI network. I contacted the support a few weeks ago, and they have replaced the MD3000i RAID controllers as well as the background. They are insistent that there is a configuration problem and would not assist any more beyond to send me links suggested configs. I went through the Setup on the R810 (Windows 2008R2) from scratch. This has not produced different results. Then I updated all drivers (BCM5709Cs) NETWORK card and software on all hosts, successfully restarted the MD3000i and the two MD1000s bike powered two switches HP Procurve 1400 and restarted all hosts. I can't always ping RC0. I Putty and captured RC0 boot logs, but it was not obvious to me. Here are the logs of boot:

  -=<###>=-
  Set the interface lo0... done

  Autonomous 9768 symbols added.
  Error
  03/26/13-16:44:29 (GMT) (tRootTask): NOTE: I2C transaction returned 0x0423fe00

  ATTENTION: Reset by spare controller

  Current date: 26/03/13 time: 09:26:15

  Send Change Service Interface rate or baud
  03/26/13-16: 44:46 (GMT) (NCDB): NOTE: sequence SOD is Normal, 0
  03/26/13-16: 44:46 (GMT) (NCDB): NOTE: SOD: removed host SAS from index 0
  03/26/13-16: 44:46 (GMT) (NCDB): NOTE: in iscsiIOQLIscsiInitDq.  iscsiIoFstrBase = 0 x 0
  03/26/13-16: 44:46 (GMT) (NCDB): NOTE: turn on seeing failure summary tray
  03/26/13-16: 44:48 (GMT) (NCDB): NOTE: SYMBOL: SYMbolAPI registered.
  esmc0: event LinkUp
  03/26/13-16: 44:50 (GMT) (tNetCfgInit): NOTE: the loan network
  03/26/13-16: 44:51 (GMT) (NCDB): NOTE: channel initiating Drive: ioc:0 bringup
  03/26/13-16: 44:54 (GMT) (NCDB): NOTE: the Firmware Version of the IOC: 00-24-63-00
  03/26/13-16: 45:17 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan: 0 phy:0 prevNumActivePhys:2 numActivePhys:2
  03/26/13-16: 45:17 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan: 0 phy:1 prevNumActivePhys:2 numActivePhys:2
  03/26/13-16: 45:17 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan: 1 phy:2 prevNumActivePhys:2 numActivePhys:2
  03/26/13-16:45:18 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan: 1 phy:3 prevNumActivePhys:2 numActivePhys:2
  03/26/13-16:45:18 (GMT) (tSasCfg021): NOTE: path of the Alt up - chan: 0 phy:18 itn:1 controller
  03/26/13-16:45:18 (GMT) (tSasCfg022): NOTE: path of the Alt up - chan: 1 phy:16 itn:2 controller
  03/26/13-16:45:18 (GMT) (IOSched): NOTE: discoveredEncl: enclosure: 1, enclProp: x2c50104, trayId: slotCount 2:15
  03/26/13-16: 45:19 (GMT) (NCDB): NOTE: IonMgr: Drive Interface enabled
  03/26/13-16: 45:19 (GMT) (NCDB): NOTE: SOD: instantiation Phase complete
  03/26/13-16: 45:19 (GMT) (NCDB): NOTE: controller between open Communication channels
  03/26/13-16: 45:19 (GMT) (IOSched): NOTE: initiator of news: 1 - channel: 1, devHandle: x2c, SAS address: 590b11c41a9d8b00
  03/26/13-16: 45:19 (GMT) (tSasDiscCom): NOTE: complete a discovery SAS task created
  03/26/13-16: 45:19 (GMT) (NCDB): NOTE: LockMgr role is slave
  03/26/13-16: 45:19 (GMT) (IOSched): NOTE: discoveredEncl: enclosure: 1, enclProp: x2c9516c, trayId: slotCount 2:15
  03/26/13-16: 45:19 (GMT) (IOSched): NOTE: new initiator: 2 - channels: 0, devHandle: x1a, SAS address: 590b11c41a9d8b01
  03/26/13-16: 45:21 (GMT) (IOSched): NOTE: discoveredEncl: Speaker: 2, enclProp: x2c8f730, trayId: 1, slotCount: 15
  03/26/13-16: 45:21 (GMT) (sasCheckExpanderSet): NOTE: Expander Firmware Version: 0116-e05c
  03/26/13-16: 45:21 (GMT) (sasCheckExpanderSet): NOTE: address SAS Expander: salvation = Low = xf6ac8d10 x5848f694
  03/26/13-16: 45:21 (GMT) (tSasDiscCom): WARN: SAS: Initial full time of discovery: 33 seconds
  03/26/13-16: 45:21 (GMT) (IOSched): NOTE: discoveredEncl: Speaker: 2, enclProp: x2c66ad4, trayId: 1, slotCount: 15
  03/26/13-16: 45:22 (GMT) (NCDB): NOTE: spmEarlyData: from alternate data
  03/26/13-16: 45:22 (GMT) (NCDB): NOTE: WWN baseName (valid ==> SigMatch) 00040026-b95795de
  03/26/13-16: 45:23 (GMT) (NCDB): NOTE: ionEnableHostInterfaces is waiting for a channel lends itself
  03/26/13-16: 45:26 (GMT) (NCDB): NOTE: ionEnableHostInterfaces expected 3800ms for a channel lends itself
  03/26/13-16: 45:26 (GMT) (NCDB): NOTE: IonMgr: Host Interface enabled
  03/26/13-16: 45:26 (GMT) (NCDB): NOTE: SOD: pre to complete initialization Phase
  03/26/13-16: 45:47 (GMT) (NCDB): NOTE: ACS: autoCodeSync(): beginning of the process. Comm mode: 0, State: 1
  03/26/13-16: 45:47 (GMT) (NCDB): NOTE: SOD: complete Phase initialization Code synchronization
  03/26/13-16: 45:48 (GMT) (NvpsPersistentSyncM): NOTE: persistent storage NVSRAM updated successfully
  03/26/13-16: 45:48 (GMT) (NCDB): NOTE: initialization complete USM Mgr with 0 records.
  03/26/13-16: 45:49 (GMT) (NCDB): NOTE: BDU - received 1 small files
  03/26/13-16: 45:49 (GMT) (NCDB): NOTE: BDU - received 0 records of great
  03/26/13-16: 45:50 (GMT) (NCDB): NOTE: acquire 0.035 dry
  03/26/13-16: 45:53 (GMT) (NCDB): NOTE: QLStartFw: FW drive download image 03.00.01.47 033eab00 4c0c8 bytes, result 0
  03/26/13-16:45:55 (GMT) (tRAID): NOTE:  ********************************************************************************
  03/26/13-16:45:55 (GMT) (NCDB): NOTE: Application target QLogic, 2.01.08 Version 2005-06-13 (W2K)
  03/26/13-16:45:55 (GMT) (NCDB): NOTE: iSCSI Target Application
  03/26/13-16:45:55 (GMT) (tRAID): NOTE:   ********************************************************************************
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: iSNS Server 0.0.0.0:3205
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: ISNSServerIPv6Addr 00:00:00:00:00:00:00:00: 3205
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: iSCSI name iqn.1984 - 05.com.dell:powervault.md3000i.60026b90005795de000000004b2ae7b6
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: port = 0, turn on IPv4 = 1, turn on IPv6 = 0
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: 10.182.233.250:3260 IP address
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: Firmware waiting for DHCP lease.  State 18
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: 18 FwState 000/010 of time
  03/26/13-16: 45:57 (GMT) (NCDB): NOTE: QLInitializeFW: 10/01/00 18 FwState of time
  03/26/13-16: 45:58 (GMT) (NCDB): NOTE: QLInitializeFW: 10/02/00 18 FwState of time
  03/26/13-16: 45:58 (GMT) (IOSched): NOTE: QLIsrDecodeMailbox: Port 0 bind upward.
  03/26/13-16: 45:59 (GMT) (NCDB): NOTE: QLInitializeFW: 10/03/00 FwState time 0
  03/26/13-16: 46:00 (GMT) (NCDB): NOTE: QLInitializeFW: port = 1, turn on IPv4 = 1, turn on IPv6 = 0
  03/26/13-16: 46:00 (GMT) (NCDB): NOTE: QLInitializeFW: 10.182.232.250:3260 IP address
  03/26/13-16: 46:00 (GMT) (NCDB): NOTE: QLInitializeFW: Firmware waiting for DHCP lease.  State 18
  03/26/13-16: 46:00 (GMT) (NCDB): NOTE: QLInitializeFW: 18 FwState 000/010 of time
  03/26/13-16: 46:01 (GMT) (NCDB): NOTE: QLInitializeFW: 10/01/00 18 FwState of time
  03/26/13-16: 46:02 (GMT) (NCDB): NOTE: QLInitializeFW: 10/02/00 18 FwState of time
  03/26/13-16: 46:03 (GMT) (NCDB): NOTE: QLInitializeFW: 10/03/00 FwState 18 time
  03/26/13-16: 46:03 (GMT) (IOSched): NOTE: QLIsrDecodeMailbox: Port 1 link up.
  03/26/13-16: 46:04 (GMT) (NCDB): NOTE: QLInitializeFW: 10/04/00 FwState time 0
  03/26/13-16: 46:05 (GMT) (NCDB): NOTE: PM - reading DB (record 1.0)
  03/26/13-16: 46:08 (GMT) (t1): NOTE: QLTA_HandleTeb: Connect ports 0
  03/26/13-16: 46:08 (GMT) (t3): NOTE: QLTA_HandleTeb: port 1 link up
  03/26/13-16: 46:09 (GMT) (t2): WARN: QLTA_Handleteb: 72 event Code.
  03/26/13-16: 46:09 (GMT) (t4): WARN: QLTA_Handleteb: 72 event Code.
  03/26/13-16: 46:09 (GMT) (NCDB): NOTE: CCM: sodMirrorCheckIn() waiting alt cache check in mirror...
  03/26/13-16: 46:10 (GMT) (NCDB): WARN: CCM: initMirrorAltChkIn() may not reflect
  03/26/13-16: 46:11 (GMT) (NCDB): NOTE: CCM: initialize(): cache configuration
  03/26/13-16: 46:11 (GMT) (NCDB): NOTE: from UWManager::initialize, 510, the invalid index - 1 entries
  03/26/13-16: 46:11 (GMT) (NCDB): NOTE: NVSRAM IW queue size is 0
  03/26/13-16: 46:16 (GMT) (NCDB): NOTE: RTR: IO released
  03/26/13-16: 46:17 (GMT) (NCDB): NOTE: SOD: initialization Phase complete
  ==============================================
  Title: Disk Array Controller
  Copyright 2005 - 2011 LSI Logic Corporation, all rights reserved.

  Name: RC
  Version: 07.35.39.64
  Date: 16/08/2011
  Time: 14:24:32 CDT
  Models: 1532
  Manager: devmgr.v1035api01.Manager
  ==============================================

  03/26/13-16: 46:17 (GMT) (NCDB): NOTE: sodMain of the sequence is complete, elapsed time = 90 seconds
  03/26/13-16: 46:17 (GMT) (NCDB): NOTE: complete sodMain
  03/26/13-16: 46:17 (GMT) (EventGateManager): WARN: GMOS: 8 events of creation for objects that already exist

  IPs I can ping: 10.182.232.251 and 10.182.233.251 (both on RC1). I can even ping all other iSCSI host initiator ports! I hope I gave enough information about me for some answers. Please advise!

  Thank you.

  What are the 4 IP addresses and subnets for the 4 the MD3000i iSCSI ports?

  ISCSI controller 0 port 0?: (guess 10.182.232.250/24)

  ISCSI 0 1 controller port?: (guess 10.182.233.250/24)

  Controller 1 iSCSI port 0: 10.182.232.251 24 (hypothesis on the mask)

  Port of iSCSI controller 1 1: 10.182.233.251 24 (hypothesis on the mask)

  Wiring must be:

  iSCSI 1 Switch / VLAN:

  ISCSI controller 0 port 0

  ISCSI controller 1 port 0

  Server 1 iSCSI port 0 (in the subnet 10.182.232.x 24)

  etc.

  iSCSI Switch 2 / VLAN:

  ISCSI 0 1 controller port

  ISCSI 1 1 controller port

  Server 1 iSCSI port 0 (in the subnet 10.182.233.x 24)

  etc.

  To test iSCSI on controller 0 port, take a cell phone with a Gbit ethernet port (any modern laptop should have it), connect the ethernet controller iSCSI 0 0, 10.182.232.100 port value IP from the laptop and try to ping 10.182.232.250 (assuming that it comes to the INVESTIGATION period on this port). If it works, change the IP of the laptop to 10.182.233.100 and move the cable to the iSCSI port 1 and try to ping 10.182.233.250 and see if you can ping the IP address.

  If these two are working, the first thing that comes to mind is that the port 0 and 1 have their swapped cables.

• External ringer on Port FXS VoIP phone w / call Mgr 8.6

  Hello

  I'm doing an external Bell at the same time when a Cisco VoIP phone is called.  The environment in which we are is very hard and the ringtone was great before, we have implemented VoIP.

  I have the external Bell connected to a FXS port out of my 2800 router.  When I call the number I have on the other hand, it sounds.  I have assigned the same number to a VoIP Cisco Call Manager phone, but it sounds only if I have the 'destination-number 9195551212' removed from the FXS port.

  I looked for answers/ideas on the Board and found that some said and use the stcapp option to set the maximum option to 2 or more on the number in the call manager.  However, it made no difference; I can have either the Bell, or the number - but not both.

  Anyone have any ideas?

  voice pots Dial-peer 502

  Description external Bell

  preference 1

  destination-model 9195551212 *.

  incoming called-number.

  port 0/1/2

  !

  * NOTE: Number changed for example.

  Thank you!

  Configure the port in SCCP, instead of H.323 mode at this time (search)

  Mark CUCM as a analofport device.

  Configure a shared on the device line and an IP phone.

  Both will ring at the same time, done.

• I want 2 external monitors with port 1 thunderbolt?

  I have a 2012 13 "MacBook Pro with 8 gram yosemite, i5processor, HDD 500Gig." How can I configure multiple monitors?

  Your MacBook Pro supports 2 monitors on the Thunderbolt port or 1 monitor HDMI port and the other on the Thunderbolt port.

• USB PORTS NOT EXTERNAL SENSORS

  I have 3 usb ports on my laptop HP Clubhouse.  Have never encountered a problem like this in the past.  I can use my external mouse, USB port will not read a flash drive or an external hard drive.  I checked the Device Manager and there is no error message, and all USB ports are read as working properly.  I installed all the news updates and drivers and still nothing.  I could understand if I was to receive error messages which is however not the case.  Is it possible that all 3 of my USB ports would die at once, and if so, why all this bed as usual.  Help, please!

  Hello

  Yes its very common because they all share the same hardware and software.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the readers and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cisco 5505, inside, I cannot ping the external IP of the router, but inside I can ping anything else

  Hello

  5505 Cisco's internal IP: 10.10.0.1 static, securty level 100

  External IP of Cisco 5505: 36.X.X.23 Dhcp, 0 security level

  of within peut all host external example ping by host 10.10.0.3 to google.com

  inside peut ping all domestic example of the host, host 10.10.0.3 to 10.10.0.5 included the internal IP of Cisco 10.10.0.1

  inside peut ping ip network address different on the same network from my router external example the host 36.x.x.25

  cannot ping inside the IP 36.X.X.23?

  from outside peuvent ping the IP 36.X.X.23

  outside peuvent ping different extenal network 36.X.X.X network ip

   
  How can I ping the 36.X.X.23 of the Interior, any suggestions?

  It's called background management which is not supported in the ASA

  https://Tools.Cisco.com/bugsearch/bug/CSCtd86651

  That's why is not and this will never work the ASA design does not

  It will be useful.

• RV180 getting is not gigabit/1000 WAN port speed

  I have my RV180 connected to a modem Motorola SB6121 cable into the WAN port. The modem indicates that the connection to the router is only 10/100. If I plug my laptop directly into the cable modem, it indicates that the connection is full gigabit.

  RV180 configuration, less Networking > port management, the WAN (Internet) port is enabled and Full Duplex value and speed of 1000. Auto-negotiation and flow control are unchecked. I also changed the WAN port for auto-negotiation and restarted the RV180. But none of these settings seem to affect the speed detected on the modem end. He always shows a light orange Link that says 10/100Base-T, instead of a blue light of the link indicating full 1000Base-T.

  Am I missing another setting somewhere, or is there another reason why the modem insists that the connection to the router is only 10/100?

  If I plugged my laptop into the RV180 rouoter's WAN port, I do not see how that would be a proper test.
  

  Then two different cables do you use?  The reason why I ask because there are some cables Cat5/Cat6 "shonky" that are not properly completed.  If they are properly finished cables, you can obtain 1 Gbps.  If this isn't the case, you will get 100 Mbps.

• [SRP527w] Use the 4 Ethernet Port as a WAN Port?

  English:

  Hello world

  I just can't understand how to use the ethernet port 4 as a WAN port.

  I think it's possible because it labeled LAN/WAN at the rear of the unit... If someone can, please let me know how!

  Thank you for your help,

  Gaultier.

  English:

  Hi all

  I can't configure the 4 en world WAN ethernet port.

  It seems to me that this is possible since the port is called LAN/WAN on the device... If someone did it, thanks for that comment!

  Thank you for your help,

  Gaultier.

  Hi Gauliter,

  Please use the Administration > menu of switch setting.  Set the option Interface DSL for disable use 4 Port LAN instead of the ADSL interface.

  Note, this setting will factory reset the router and completely disable this ADSL interface.

  

  I hope this helps.

  Andy

• Could not ping router RV042G public Internet address when it is after spending a SG200-08

  I use the optical fiber Singtel broadband server. I installed a SG200-08 for UNTAG VLAN to port 2 and connect the port to port RV042G WAN 1. It works very well with a public IP address. Access to Internet is very well to router LAN ports.

  However, I try ping on the public IP address of RV042G of the internet, I could not reach him. Everything what I'm missing in configuration SG200-08?

  Hello

  I don'i heard the switch block ICMP traffic as it has layer 2 switch, can you please check if the Ping on the interface of the router WAN is activate--> firewall--> WAN ping of uncheck block

  Please rate this post or marked as replied to help other customers of Cisco

  Thank you

  Mehdi

• VMware View Agent 5.2.0 PCoIP over WAN fails

  Recently, I did an upgrade on VMware View VMware view horizon 5.2 4.6 square.

  After the upgrade the 4.6.0 view agent in virtual machines of my parents to view agent 5.2.0 and rebuild the office pools, external PCoIP does not work. Can I open a session in the 5.2 Client view, see the list of office pools, select a pool, the desk at work close and try to open remotely. After 1 second, this error appears:

  Error: Overview of VMware View Client: The connection to the remote computer has ended.

  What does not work:

  • External/WAN via PCoIP for workstations with the view Agent 5.2.0

  What does not work:

  • Internal/LAN via PCoIP for workstations with the view Agent 5.2.0
  • Internal/LAN via RDP for workstations with the view Agent 5.2.0
  • External/WAN via RDP for workstations with the view Agent 5.2.0
  • External/WAN via PCoIP for workstations with the Agent View 5.1.3 or lower (tested up to 4.6.0 Agent view)

  I even tried to build a new pool of desktop Windows 7 in a new OU in the active without optimizations VDI directory or group policy. I tried with and without the firewall Windows is activated. In any case, this new office pool works externally via any Agent from view but the view Agent 5.2.0.

  Is it the 5.2.0 Agent view have the same firewall/port that the Agent View 5.1.3 requirements? What else can I test or try to get external PCoIP for desktop computers to work with the view Agent 5.2.0?

  Finally, we discovered the problem / solution. We on a security apparatus of Palo Alto Networks that blocked traffic PCoIP 5.2.0 but not PCoIP 5.1.3 traffic.

  According to a backline Vmware engineer:

  "A change was made to the ephemeral TLS connection that is used to establish trust and to negotiate parameters for subsequent UDP traffic network. This change allows the customer to use their own certificate for TLS server for this connection. For more details of what happens during the installation of PCoIP, and how this changed view 5.2, see KB 1038762. »

  It seems that Palo Alto Networks did not like this change. When we removed our Palo Alto of WAN device, PCoIP 5.2.0 connections could be created. We finally had create a rule to allow the category: private-ip-addresses and URL: pcoip - by default-sni. Once this change has been made, connections WAN PCoIP 5.2.0 started working.

• Satellite Pro L10 problem with Ports COM/Hyperterminal & Bluetooth

  Hello
  I have the following problems with the above machine:

  (1) I have attached an external series COM port to the machine. However, I can not connect to the COM Port using Hyperterminal.
  (2) I installed a Bluetooth USB adapter, but I can't view the protocol configuration.

  Each of the above works perfectly with another laptop that doesn't have a Bluetooth or even a network card.

  Everyone has experienced similar problems. I use WinXP SP2.

  Thank you

  MC

  Hello

  1, in which is the external COM port connected? Is detected in a straight path in Device Manager? What is the error msg to Hyperterminal?
  When connected via PCMCIA, try to change the settings for PCMCIA slot in the BIOS!

  2, try to reinstall the Toshiba Bluetooth stack! There may be some problems. The MS Bluetooth stack does not work properly with the Toshiba devices and one of the earlier Toshiba Bluetooth stack is not signed by Windows XP Service Pack 2!

  Hans Bye