[SRP527w] Use the 4 Ethernet Port as a WAN Port?

Similar Questions

• Using the second ethernet port to connect to the printer?

  Hi I have a Mac Pro 2.1 old school and I'm wondering if I can connect to the network with an ethernet port and connect the latter to a printer?

  If so, how?

  Yosemite running.

  Thank you

  Physically, you use a port and a cable to connect to your network and use the second port and a second cable to connect directly to the printer. The printer must obviously have an interface Ethernet himself.

  However, you need to configure the second port on the Mac and the Ethernet port on the printer for each manually configured the TCP/IP addresses and these should be in a range of different network to your main network.

  If you the main network is something like 192.168.1.1 then your printer and the port on the Mac connection to this need to be in another network, such as 192.168.11.1.

  In theory, if the printer supports Hello aka. mDNS, then maybe you can get away with not having to configure TCP/IP addresses for the connection.

  The main reasons to use a second separate connection as this would be the performance or security, and frankly I don't think that's really relevant here. This would mean that no other computers on your network will be able to access the printer.

• Can I use the lan Ethernet port on the airport express to the release of music?

  Can I use the Ethernet connections on airport express at the exit of music over wifi to a set of speakers? I would use an Ethernet connector at one end a DIN 5 pin to a pair of speakers beolab 2500/2300. I don't want to use the PIN audio output on the Airport express, as it is analog. Possible music out through one of the Ethernet connections at the back of the Airport express? Thank you

  Can I use the Ethernet connections on airport express at the exit of music over wifi to a set of speakers?

  Sorry, but no.

  I don't want to use the PIN audio output on the Airport express, as it is analog

  Perhaps you weren't aware that audio port on the AirPort Express audio book Terminal analog or digital, according to the type of connector used. See this link on the AirPort Express specifications to confirm... http://www.Apple.com/Airport-Express/specs/

  In other words, for the Express deliver audio analog, connect a standard stereo mini plug with connectors appropriate to the other end.  To ensure that the Express deliver audio digital, plug a mini Toslink cable to the audio port on Terminal AirPort Express.  An example is in this link... Airport Express Toslink - Amazon.com

• Force the VM to use the wired ethernet port instead of wireless

  Hello

  I use ver 9 workstation.  I have my host computer (win 7 64 bit) connected to our network of offices using the connection with wireless computers.

  I use a windows xp based virtual machine image that connects to devices of 3rd party via the ethernet port wired in Bridge mode.

  Is there a way to force the workstation on the use of only the cable connection and don't EVER try to connect via the wireless?

  At the moment I have to disable the wireless for the workstation to access cable port, if the without wire is activated, so you may not see anything on the wired port...

  It also causes headaches with ip address conflicts (3rd devices use the same IP range as our network of offices) if I don't have the VM running and wireless power.

  Any help or advice would be appreciated

  Tim

  Use the virtual network Editor to bind to the target adapter for VMnet0 and set the NIC of the virtual machine to use connected by a bridge.

• iOS 10.0.1 "not allowed to use the restricted network port.

  I just upgraded my iPad Mini iOS 10.0.1. He is now running Safari 10. I tried to visit an internal/private IP on port 4190 using HTTP. I get an error that says:

  Safari cannot open the page.

  The error was: "not allowed to use the restricted network port.

  On iOS 9.3 using Safari 9, the same URL opens fine without this error.

  Do not know what has changed since iOS to iOS 10.0.1, 9.3 but I'm unable to visit a web site that I have visited before.

  I know that WebKit maintains a list of ports that you cannot go (e.g. 6666), 4190 is not a restricted port AFAIK. I don't know why I get this error message.

  It seems I was looking at the wrong source code.

  I finally got a clue where to look after visiting the page Web Safari Technology Preview 13.

  https://trac.WebKit.org/browser/releases/Apple/Safari%20Technology%20Preview%201 3/WebCore/platform/URL.cpp

  It seems port got 4190 recently added to the list of blockedPortList

  2306	2049, / / NFS
  220V	3659, / / apple-sasl / PasswordServer [addition of Apple]
  2308	4045, / / lockd
  2309	4190, / / ManageSieve [Apple adding]
  2310	6000, / / X 11
  2311	6665, / / alternate IRC [addition of Apple]
  2312	6666, / / alternate IRC [addition of Apple]
  2313	6667, / / standard IRC [addition of Apple]
  2314	6668, / / alternate IRC [addition of Apple]
  2315	6669, / / alternate IRC [addition of Apple]
  2316	invalidPortNumber, / / used to block all the invalid port numbers
  2317	};
  2318	const unsigned short * const blockedPortListEnd = blockedPortList + * _ARRAY_LENGTH (blockedPortList);

• Can I use the s - vhs port to send video to television on Satellite A100-338

  Can I use the s - vhs port to send video to my TV? I have a good s - vhs cable to SCART. However, I can't set up the laptop to use the port s - vhs. The driver intel graphics media accelerator thingy does not allow me to add tv as another device, because it's not reccognise as a screen.

  It's a Toshiba 21 '' bog standard CRT. Widescreen even not. I want to be able to use the media library.

  Hello Peter

  Of course, you can use this port. This port is there exactly for this purpose. Make sure to use right high quality cable and connect it properly on your TV. I use the same port on my Tecra. I also use adapter SCART like this one http://videoclub.tiscali.co.uk/img/scart_adaptor.gif and it works perfectly. Make sure you use the right settings on your TV.

• My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

  My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

  I followed the instructions on my laptop on how to connect to broadband and I even called the company from whom get connection but they could n, t help me. I need help! I want to use my wireless laptop and how do I do it?

  Hi Hn_668,

  See the articles below and check if it helps.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  To set up automatic wireless network configuration

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  5 steps: how to set up your network wireless home

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• Cannot use the Micro-USB port on the coming Pro 11?

  Hello

  Can I use the micro-USB port to a mouse or other device (with Dell micro-USB to USB dongle for tablets)?

  Bought one as advertised and does not work...

  Thank you

  Hey guys, it seems that there is still much confusion over the functions of the port mictousb on the place of the 11 sessions pro.

  Anyone know if it is possible to use it for anything other than recharging? An OTG cable connected I have here doen't work on my 7130, but on ebay, some sellers here in Germany offer small hubs with OTG funcion specially for this model:

  http://www.eBay.de/ITM/kwmobile-3In1-micro-USB-hub-adapter-fur-Dell-venue-11-Pro-Schwarz-Verteiler-Kit-/361194175623

  Does anyone know for sure who is the truth?

  EDIT: also, as the microusb port has the logo of bolt on I guess this is the port used for the powershare function (if this feature is enabled in the BIOS). Does this mean I have to buy a microusb to microusb cable to recharge my mobile hollow 11 meeting places powershare function?

• Can I use the mini HDMI port to safely load my HX200V?

  I used the mini HDMI port to load my camera HX200V battery,

  but the battery does not very long load, even after being recharged.

  I have hurt the battery?

  Hi RickS8082,

• Impossible to use the DVI - D port with cable DVI - D Pav 500-100 a to HP W2207 monitor

  I have a new standard of factory Pav 500-100a without mods.  HP w2207 monitor.

  Currently properly connect with VGA DVI - D port with the adapter supplied with the pc.  I have install Windows Update 8.1, put in my files from my old PC and everything was fine except the video is not very good.

  I got a formwork of cable DVD, but it's a DVI-I have the cable.  It took 5 minutes before windows comes up and then whenever the background picture changed in the theme which he suspended for a few seconds.  I read that I have a DVD-D need cable which i purchasd today.

  The package says it's a CL-DVI2M - DVI M/M 24 + 1 CABLE 2 M.  The tech in the store said that it is a good calbe and works perfectly.

  When connected and power until I get the hp and rolling points logo, then it turns off.

  I reconnect the cable VGA and all its beautiful - using the VGA to DVI.

  I ran msconfig and turned from secure boot - restarts and comes well in safe mode.  I set the resolution of 1280 x 800 and rebooted and reconnected the cable DVI - Virgin again.

  If I put the cable VGA back inside fine boots.  The monitor was given factory and seens the DVI connection but Windows remains empty. Also tried to start first with no cable - connect the DVI and the monitor remains in sleep - be able to reset the monitor and still a Virgin is also no connection DVO.

  I have fI switch with connected DVI I can get to the BIOS, and I see the HP logo and the points Win 8 starts.

  I don't know what else I can try.  I have no other usable with DVI video card

  Any ideas out there?

  Pls help - Steve

  Although I am an employee of HP, I speak for myself and not for HP.

  Yes, I rasthaus the monitor and cable of my older Compaq running xp and all fine on DVI.  The monitor and cable are fine.

  Since then, I've had a product in Australia specialist help.  Tried all the previous things, then initially went to check if the person had been doing the right thing - connected the VGA monitor with the supplied adapter DVI-d port - which has always worked well.

  Went to Device Manager o and removed the video card adapter. Powered off and then attached the monitor directly with DVI and it started late! Drviers reinstalled and updated and now I have nice crisp clear video appears.

  Something of the support person should apparently have - insead has asked me to wipe the hard drive and restore the factory system, replace the cables, buy a new monitor... was even asked to leave VGA mode and do not use DVI!

  Thank you for your help, Dave, its good to know that you are around to help us.

• How to transfer and share files using the cable ethernet on hp probook 4540

  Please using the ethernet cable I connect two laptops with windows OS 8, but can not set up to share files and folders. Please help me, it keeps bombarding me with animals of the AUTHORIZATION.

  Hello Abekah,

  I understand that you need assistance, sharing of files between computers.

  Here is a link to a video that will guide you through the steps.

  I would like to know how everything goes.

• PowerConnect 6248 stacking using the front SFP Ports

  I am trying to stack two Dell Powerconnect 6248 switches. Currently they are chained together, but I modules fibre for the front sfp ports. Theoretically, I should be able to stack them. But when I try:

  stack 1/g45 #stack - port console (config-battery)

  Could not set the front panel stacking mode.

  Any ideas? Thank you!

  The PCT6200 requires a stack of modules installed in Bay 1 (XG1 XG2) at the rear of the switch. The stacking module uses CX4/Infiniband type stacking spacers.

  Stacking of front port / user is not supported

• LNS still to try to use the same old port

  Hi all

  I did change in the port of the listener (from 1527 to 1521) on our database awaiting.

  I also update the tnsnames.ora on the primary to point to 1521. But the primary database is still looking for listening on the old port (1527).

  It is a mistake to log alerts that say he's trying to use the old port.

  How can I make the primary database using the new port.

  Thank you

  Silver

  We restarted just instances of primary database and it worked.

• Connect the NAS (iSCSI) to vSphere using the crossover Ethernet cable

  Hello

  I have a HP Proliant DL360 G5 in a data center (housing) directly connected to the internet. To save all the VM I would fix a NAS (QNAP with iSCSI) on the server. But given that the server is connected only to a 100 Mbps switch (supplier provide only 100 Mbit) I am looking for a direct solution to enjoy better performance.

  I use on my Proliant Server internal dual port NIC (VMNIC0 and VMNIC1) and an additional port of double NC360T NIC (VMNIC2 and VMNIC3). I made two switches, with VMNIC0 and VMNIC2 vSwitch0 and vSwitch1 with VMNIC1 and VMNIC3 for redundancy. Each vSwitch has its own service with the public IP console.

  Because I would like to continue using the above configuration, it came into my mind to buy an additional network (NC110T with 1 NIC) of the card and use a crossover cable directly to QNAP NAS. The NAS has two NIC, we'll be fixed as said to the ESX and directly to the internet (to manage from outside).

  But now I don't know how to configure it. What should I do that the ESX will intervene to the NAS, and what type of IP address I need to adjust on the NAS to talk to the ESX?

  What I have to configure a vSwitch2 (with physical adapter NC110T) and a new Console of Service with a private IP address: for example. 192.168.1.1 and the card NETWORK NAS Port that connects to the ESX, I put 192.168.1.2 and then it should be possible to work with ISCSI? I can then add the storage in vSphere?

  I would really appreciate if someone understands perfectly how such things can give me an advice!

  Thank you very much

  Best regards

  Phil

  It sounds like a good plan and you have the process down to the right.

  • After the installation of the new card as you did for the first configuration, you should see additional network cards.

  • • You create a new vSwitch for the internal network segment that connects the NAS and ESX you note and add these network adapters

    • Then you create the port console and IP address on the private network

  • Now both devices may be

  • In QNAP, you create your iSCSI target or your NFS volume

  • For iSCSI you go to storage adapters - properties - add the ip address of the NAS and then close and discover

  • • This should find the paths of the target.

    • Then you go into storage and add and format the iSCSI volume

  • For NFS, you go straight to the storage and add the name address and NAS volume and turn up the volume of storage

  All storage will be visible and usable by ESX.

  Steve Puluka

  JNCIA-ER

  JNCIA-EX

  Senior network administrator

  Liberty Dialysis

  http://puluka.com/home

• Satellite A105-S4384 - how to use the s-video port

  What is the way to use a s-video cord to connect my 4384 to use the TV as a display?

  I use Linux Ubuntu 8.04... Thank you

  Hello

  Usually, you don t need no work around special to make the connection with the external TV.
  You must connect the laptop with the TV using the s-video cable.

  Please note that the s-video channel must be enabled on your TV.
  Then change the video output in the properties of the graphics card.

  Using a Windows operating system, you would be able to switch to the external TV by pressing the FN + F5 keys, but as much as I know about Linux OS this function will not work.

  Welcome them