Public static assignment MAC broken?

Similar Questions

• WRT54G static assignment of IP addresses?

  Hello everyone, I have a WRT54G v4 (FW 4.21.1) router wireless and I am trying to configure to assign static IP addresses to my devices.  I have two wired devices, and seven wireless devices and IP addresses are constantly evolving. This is normally no big deal, one of the wired devices is my printer (connected via a cable etherner). The only way I can install this printer to devices is to a standard TCP/IP installation, using the IP address assigned automatically. My question is, can I assign one address of the printer so that I can install it on the rest of devices with an address? Or do I have to assign an address to each machine? And how even statically assign? I know how to connect on the router and am familiar with the integrated navigation page, but I do not see a table of MAC addresses anywhere. I have the latest firmware as well. Thank you in advance for the answers!

  The WRT54G does not support a DHCP reservation. You set a static IP address on the printer. I have not heard a network printer on which you cannot set a static IP address...

• public static IP on the same subnet of both internet and local

  I need to configure my little guy with ip static on the same subnet on the side of the router/internet and the side room, but it does not.

  I will allow me to dhcp on the side of the router/internet and then statically assign an ip address from the same subnet on the local side, but then it does not pass on my dhcp server dhcp queries.

  suggestions?

  Yes. Configure the WRT with a LAN inside your main LAN IP address. Disable the DHCP server on the WRT. Wire then a main WRT to your local area network LAN port. Do not use the internet port on the WRT.

• {} Public static

  Boy, it is difficult in 53 and feeling totally stupid, but Java can do it for me.

  I; have my head wrapped around statics and constants and static methods, and I found (thankfully) one of the examples which allowed me to analyze step by step to better understahnd the language (it's my best course).

  However, it baffles me: things wrapped in JUST {} public static.  I've been Googling like crazy, but all the explanations are either variables or class, not fopr this thing.

  Here is an example of the MemoryDemo example I discuss:

  // Statics -------------------------------------------------------------------------------------
  private static Random _random;  To generate random numbers for dates and channels.
  private static ubyte [] _letters; To generate random strings.
     
  // Constants -----------------------------------------------------------------------------------
  private static final int MIN_STRING_LENGTH = 3;   Minimum length for a random string.
  private static final int MAX_STRING_LENGTH = 10;  Maximum length of random string.
     
  public static
  {
  _random = new Random();
  _letters = new ubyte [MAX_STRING_LENGTH];
  }
  

  So, I understand not statements made by the statics and constants... no problemo.

  But what is the reasoning behind the encapsulating the _random and _letters inside the {} public static?  Is it just a kind of shorthand for something else?

  Again, I apologize for what must seem like stupid question, but I don't want to jump on something that I think moight be crucial to understand.  Thanks in advance (again)!

  -John

  I don't see why initialization that you see in this class could not be done as you suggest.

  However, there are other situations where this isn't the case.

  For example not elegant and simple (there are other better ways to dong that), you can have a static value that identifies whether the device is a touch screen,

  If you have

  public static boolean IS_TOUCH_SCREEN;

  public as well as any other class can test this just by using .IS_TOUCH_SCREEN

  {public static

  String pattern = DeviceInfo.getDeviceName ();

  If [(model.startsWith("95"))

  IS_TOUCH_SCREEN = true;

  } else {}

  IS_TOUCH_SCREEN = false;

  }

• PhoneListener cannot access a public static vars initialized in the main thread

  Using the emulator (SDK 4.7, phone model 9500)

  I have a class PhoneListener defined and recorded, he gets the phone events without any problems. It's all public static public var that is initialized in the main thread is always null when it is examined in the context of the PhoneListener callback thread, when examined in the main thread or a son they are defined.

  I guess since the PhoneListener callbacks are called from a system thread, it cannot access the battery of my request - it seems correct? is this in any way about this?

  I tried Application.getApplication () .invokeLater (...), but validated all executable from the PhoneListener recalled suffers from the same problem.

  Thanks - Lindsay

  Exactly, that's what I was wondering - I found the answer according to the PhoneListener in the MIDlet . Now I store my UiApplication object in the running store and access them from the PhoneLister to publish objects on my main application via invokeLater.

  Thank you

  Lindsay

• public static nat/global vs

  Excluding an access list, what is the difference between:

  NAT (inside) 1 172.16.5.10 net 255.255.255.255

  192.168.5.10 (outside) 1 global net 255.255.255.255

  and

  static (inside, outside) 1 192.168.5.10 172.16.5.10 net 255.255.255.255

  Thank you.

  in static reality must be combined with the access list for a two-way communication... You are right in a sense that

  public static nat/global access-list =

  Basically, the rule is that the traffic is allowed more high to low infterface of default security

  BUT

  from the lowest to the highest security of communication you need an access as well as the STATIC list

  Thank you

  Nadeem

• public static problem (inside, outside)

  I use a PIX to isolate a subnet to a corporate network.

  inside is the corporate network

  outside is not approved LAN

  A single user in LAN not approved need to go to a specific set of IP addresses in

  And all other users can browse the Internet via downstream

  proxy server to talk to the corporate proxy server

  It works fine,

  Why I can't use the static suite for this

  public static 159.182.111.0 (Interior, exterior) 159.182.111.0 netmask 255.255.255.255 0 0

  problem is that I have to continue to add each ip address static statement such as

  public static 159.182.111.50 (Interior, exterior) 159.182.111.50 netmask 255.255.255.255 0 0

  public static 159.182.111.60 (Interior, exterior) 159.182.111.60 netmask 255.255.255.255 0 0

  public static 159.182.111.70 (Interior, exterior) 159.182.111.70 netmask 255.255.255.255 0 0

  public static 159.182.111.80 (Interior, exterior) 159.182.111.80 netmask 255.255.255.255 0 0

  Unfortunately this site VIEW use different IP addresses in the subnet, everyday

  Is any limitation of this ststic command at the low security access

  interface high security by using the static command

  Hi, I don't know, but the problem may be in the netmask in your static instruction,

  It must be 255.255.255.0 or so because it is a network and not a host.

  hope this helps.

• Public static political static NAT in conflict with NAT VPN

  I have a situation where I need to create a VPN site-to site between an ASA 5505 using IOS 7.2 and a Sonicwall NSA4500. The problem arises where the LAN behind the Cisco ASA has the same subnet an existing VPN currently created on the Sonicwall. Since the Sonicwall cannot have two VPN both run on the same subnet, the solution is to use policy NAT on the SAA as well as for the Sonicwall, the new VPN seems to have a different subnet.

  The current subnet behind the ASA is 192.168.10.0/24 (The Sonicwall already has a private network virtual created for another customer with the same subnet). I try to translate it to 192.168.24.0/24. The peer LAN (behind the Sonicwall) is 10.159.0.0/24. The ASA relevant configuration is:

  interface Vlan1

  IP 192.168.10.1 255.255.255.0

  access extensive list ip 192.168.24.0 outside_1_cryptomap allow 255.255.255.0 10.159.0.0 255.255.255.0

  list of access VPN extended permit ip 192.168.10.0 255.255.255.0 10.159.0.0 255.255.255.0

  public static 192.168.24.0 (inside, outside) - list of VPN access

  card crypto outside_map 1 match address outside_1_cryptomap

  In addition, there are other static NAT instructions and their associated ACLs that allow certain traffic through the firewall on the server, for example:

  public static tcp (indoor, outdoor) interface smtp SERVER smtp netmask 255.255.255.255

  The problem is this: when I enter the static strategy statement NAT, I get the message ' WARNING: real-address conflict with existing static "and then it refers to each of the static NAT statements reflecting the external address to the server. I've thought about it, and it seemed to me that the problem was that policy NAT statement must be the first statement of NAT (it is the last one) so that it is run first and all traffic destined to the VPN to the Sonicwall (destination 10.159.0.0/24) tunnel would be properly treated. If I left him as the last statement, then the other static NAT statements would prevent a part of the 10.159.0.0/24 network-bound traffic to be correctly routed through the VPN.

  So, I tried first to my stated policy NAT upward in the ASDM GUI interface. However, moving the declaration was not allowed. Then I tried to delete the five static NAT statements that point to the server (an example is above) and then recreate them, hoping that would then move up the policy statement NAT. This also failed.

  What Miss me?

  Hello

  I assumed that we could have changed the order of the 'static' , the original orders, but as it did not work for some reason any then it seems to me that you suggested or change, that I proposed should work.

  I guess that your purpose was to set up static political PAT for the VPN for some these services, then static PAT of public network access, then static NAT to policy for the rest of the network in-house.

  I guess you could choose any way seems best for you.

  Let me know if get you it working. I always find it strange that the original configuration did not work.

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary

  -Jouni

• Public static long serialversion uid in doubt?

  Salvation in serializable classes we are declaring the serialversion as ' private public static long ' field. but when the object is serialized static values don't are not serialized, so at the other end when we are deserializing how the virtual machine works Java checks whether the serialvesrsion when it is serialized is the same as serialvesrsion in the class, when it is deserialized?

  It happened again, but not as part of a serialized instance.

• Public static LOV

  Hello!
  (Version 4.0.2 of the APEX)
  
  I need definition LOV that returns multiple values for a display value. For example, when I select the return value TV is 1, when I select RADIO return value is 2. And when I select what I want to return to the 1 and 2 values.
  
  List of values definition should be something like this:
  
  STATIC: All; (1,2), TV, 1, RADIO, 2
  
  Is this possible? Without any plugin, like SuperLov...
  
  Thank you!

  Dark salvation,

  Maybe this thread could help?

  Public static LOV

  Kind regards
  Sandro

• public static function return an object instance

  create or replace
  Item_object OBJECT TYPE IS
  (item_title VARCHAR2 (60))
  , item_subtitle VARCHAR2 (60)
  FUNCTION CONSTRUCTOR item_object
  RETURN SELF AS RESULT
  FUNCTION CONSTRUCTOR item_object
  (item_title VARCHAR2, VARCHAR2 item_subtitle) RETURN SELF AS RESULT
  , Public STATIC FUNCTION get_item_object (item_id NUMBER) ITEM_OBJECT RETURN
  MEMBER RETURN VARCHAR2 to_string FUNCTION)
  CANNOT BE INSTANTIATED NOT FINAL;
  
  
  create or replace
  TYPE item_object BODY IS
  Item_object FUNCTION CONSTRUCTOR RETURN self AS RESULT IS
  point ITEM_OBJECT: = item_object ('generic Title', 'Generic subtitle');
  BEGIN
  me: = item;
  RETURN;
  END item_object;
  Item_object FUNCTION CONSTRUCTOR
  (item_title VARCHAR2, VARCHAR2 item_subtitle)
  RETURN SELF AS RESULT IS
  BEGIN
  Self.item_title: = item_title;
  Self.item_subtitle: = item_subtitle;
  RETURN;
  END item_object;
  * STATIC FUNCTION get_item_object (item_id NUMBER) RETURN ITEM_OBJECT IS
  point ITEM_OBJECT;
  CURSOR c (NUMBER item_id_in) IS
  SELECT item_title, item_subtitle FROM point WHERE item_id is item_id_in;
  BEGIN
  I'm IN c (item_id) LOOP
  agenda: = item_object (i.item_title, i.item_subtitle);
  END LOOP;
  RETURN of goods;
  END get_item_object; *
  FUNCTION MEMBER to_string RETURN VARCHAR2 IS
  BEGIN
  RETURN ' ['|] [Self.item_title |'] ['|| [Self.item_subtitle |'] " ;
  END to_string;
  END;
  
  Impossible to compile static function get_item_object, can anyone help me please?

  user6446424 wrote:
  all instances of the object, as all the rows in the table

  I think you misuderstand objects. Objects do not come from thin air - it must exist somewhere or should be constructed from the data. Your function constructs the table utem data object. If you have any item in the table, which should be used?

  SY.

• public static const even as public static var

  Is it the same thing to use

  public static const

  as

  public static var

  technically, no.

  a const value cannot be changed.  value of var can be changed.

• Public static var - quick question

  Gidday

  Slowly converting my calendar code AIR dekstop app to OOP, and I'm at the part where I am loading in the user settings in a SQL table.

  I was wondering, is a public static var one good thing to use for holding user settings?

  I thought I had a class UserSettings user settings that may be held to get and set as they are needed or changed.

  Click Save, I can just walk them and save them in SQL.

  And all my classes can access them if necessary.

  Or is there a better way?

  See you soon

  Be more specific on what is YipeeClass and what he really needs. YippeeClass probably doesn't have access to all settings variables.

  For example, if YippeeClass is a point of view, he's probably just things it is designed to show. Provide you (getters/setters) properties on the view and then your main class for the Document (or better yet, a controller class dedicated) looked at the settings and fill in the properties of the display according to relevant parameters. Don't worry the Document class on how these parameters affect the view - it will be now responsible for displaying to translate the properties in any way (for example, to set the text of a text field). This is known as Dependency Injection.

  If the user interacts with the view in a way that impact parameters, send you an event to the view which is intercepted by a controller or the main document class and that class then will bring the necessary changes to the settings.

  Classes should always know the strict minimum necessary to accomplish all that they are directly responsible, and each class should be responsible for something.  I suggest you get the book associated with the links I posted: Actionscript 3 Design Patterns. At least she would give you a framework to think about such things.

• Help on parameters public static function

  Hello

  I have two functions in the same file, how can I use the first function as a default value in the second function.

  public static function get decimalFormatter1 (): {NumberFormatter

  //

  }

  I have try this:

  public static void secondFunction(param1:String,_param2:Int=0,_ _param3:Function=decimalFormatter1_):Array {}

  //

  }

  Error:-1047: unknown parameter initializer or isn't a compilation constant.

  Any ideas?

  Thank you!

  To work around the problem, you can use null as default, where null means "use the decimalFormatter1. You have to write something like

  public static void secondFunction(param1:String,_param2:int_=_0,_param3:Function_=_null):Array
  {

  trainer: function var = null;

  If (param3 is nothing)

  Formatter = decimalFormatter1;

  ....

  }

• Help with public static functions.

  Hey everyone, I worked on a problem for a while and have finally understood just wrong. Google is not helped me to find the right way, so I'm posting it here. I sort of understand what's wrong with my code, but I have no idea how to do right. I'm a total noob to AS3, this is my first project.

  I have a main FLA file called game.fla with nothing on the stage, starting with. The document class is Main.as (shown below). The main class is supposed to manage the switching between the preLoader, mainMenu and game itself. The preloader loads and the player must press play to go to the main menu. The main menu is controlled by MainMenu.as, which adds event listeners for buttons game, instructions and credits. At the present time, instructions and credits just draw responses. When you click on play, I want to remove the mainmenu (not a problem with parent.removeChild (this)); and add the game. This is my problem comes in. I can't say parent.addChild (game), because honestly, I don't know how (I need to set a variable in hand or MainMenu and must it be public, static, etc?). Simplicity seems to be a function called initializeGame() that I could simply call of mainMenu. Problem: I have to do a static function, which doesn't let me use addChild, removeChild or any other variable that I create. Could someone please explain how I could do this job (even if it means change my structure. "I would be happy to learn a better way to deal with this kind of thing). Also, on a side note: if I can't use the static function with add or remove a child, can I optimize the effect later? I want later in my game, that I would need to call functions between classes, on a button click, for example, that affect the scene (or objects in the scene). Can I do it another way? For example, by clicking on an icon of the video game card clip, I would map the movieclip to load. A function that could be described seems the best way to do it, but I'm sure he can otherwise. Thank you much in advance. My code is below.

  Main.As

  package
  {
      import flash.display.MovieClip;
      import flash.events.Event;
      import flash.events.MouseEvent;
  
      public class Main extends MovieClip
      {
          private var preLoader:PreLoader;
          private var mainMenu:MainMenu;
          private var game:Game;
          
          public function Main()
          {
              preLoader = new PreLoader;
              addChild(preLoader);
              preLoader.gotoAndStop(1);
              addEventListener(Event.ENTER_FRAME, barLoading);
          }
          private function barLoading(event:Event):void
          {
              var total:Number = stage.loaderInfo.bytesTotal;
              var loaded:Number = stage.loaderInfo.bytesLoaded;
              preLoader.loadingBar.scaleX = loaded/total;
              
              if (loaded==total)
              {
                  removeEventListener(Event.ENTER_FRAME, barLoading);
                  preLoader.gotoAndStop(2);
                  preLoader.doneLoading.addEventListener(MouseEvent.CLICK, doneLoading);
                  loaded = null;
                  total = null;
              }
          }
          private function doneLoading(event:MouseEvent):void
          {
              preLoader.doneLoading.removeEventListener(MouseEvent.CLICK, doneLoading);
              mainMenu = new MainMenu;
              addChild(mainMenu);
              removeChild(preLoader);
          }
          static public function initializeGame():void
          {
              game = new Game;
              removeChild(mainMenu);
              addChild(game);
          }
      }
  }
  

  MainMenu.as

  package
  {
      import flash.display.MovieClip;
      import flash.events.Event;
      import flash.events.MouseEvent;
  
      public class MainMenu extends MovieClip
      {
          
          public function MainMenu()
          {
              playGameButton.addEventListener(MouseEvent.CLICK, playGameButtonFunction);
              instructionsButton.addEventListener(MouseEvent.CLICK, instructionsButtonFunction);
              creditsButton.addEventListener(MouseEvent.CLICK, creditsButtonFunction);
          }
          private function playGameButtonFunction(event:MouseEvent):void
          {
              playGameButton.removeEventListener(MouseEvent.CLICK, playGameButtonFunction);
              instructionsButton.removeEventListener(MouseEvent.CLICK, instructionsButtonFunction);
              creditsButton.removeEventListener(MouseEvent.CLICK, creditsButtonFunction);
                          
          }
          private function instructionsButtonFunction(event:MouseEvent):void
          {
              instructionsButton.removeEventListener(MouseEvent.CLICK, instructionsButtonFunction);
              trace("instructions");
          }
          private function creditsButtonFunction(event:MouseEvent):void
          {
              creditsButton.removeEventListener(MouseEvent.CLICK, creditsButtonFunction);
              trace("credits");
          }
      }
  }
  

  In addition, anny comments on my coding habits and how to improve are welcome.

  in the hand

  var preloader: Preloader = new Preloader (();)

  preloader.addEventListener ("preloadCompleted", preloadCompletedF);

  in the Preloader, loading complete:

  this.dispatchEvent (new Event ("preloadCompleted"));