public static IP on the same subnet of both internet and local

Similar Questions

• WiFi AR5007 802. 11 b / g adapter cannot talk about bridge WET11 Wireless on the same subnet

  Hello

  My HP Compaq Presario C700 VISTA laptop (a AR5007 802. 11 b / g WiFi adapter) and the printer are on the same subnet. The laptop is WiFi connected to my WRT54G2 router/switch and the printer is connected to the workgroup switch that connects to the router via the LinkSys WET11 Wireless Bridge.

  The installer works fine for over a year until he was there when my VISTA does not see any PC on the Working Group 3 weeks pass including the printer. However, the WAN access is not affected.

  I did the filming of following problems (in order):

  1. check the network settings on the laptop VISTA (x.x.x.29) and (x.x.x.201) printer and all look kosher.    (All my PC including notebook computer and printer have IP STATIC)

  2. check the router and the parameters of bridge and fines all eyes (router - XXX1, bridge - x.x.x.140).

  3 Ping printer, bridge, and other PC and received messages "Destination Unreachable Host" or "Request timed out". Although all are on the same subnet. Pingée router is OK.

  4 remove and re-add the wireless profile and tried to connect again. Same problem, no joy!

  5 started VISTA in safe MODE with NETWORK. Once again, the problem has persisted but at least eliminated applications as a potential source of problems.

  6. recycled power switch/router/workgroup bridge. No joy!

  7 WiFi connected other laptops to the same router (WRT54G2) and can ping other PC and printer END.    This means that the problem is limited to my VISTA laptop.

  8 given that the problem is on my VISTA and applications are not the source (see #5) of the problem, then probably the AR5007 802.11b.g wireless network card driver is original so I downloaded driver at HP and installed with version 7.3.201.25.  Problem is persistent...  Arhhh!

  Could there be something else that I missed? Can someone please help.

  Thank you

  You are the very welcome, John.

  Yes this driver will work fine on Vista Home Premium.

  According to the notes on the driver, it can just be run without uninstalling the current pilot you have on there now.

  After executing, you can confirm it 'takes' by going into Device Manager, expand network adapters, click the atheros wireless card, click the driver tab and you should see the installed version 2011.

• Directly connected to the same subnet - still get 2 hops?

  I changed the ip numbers in this example of those public to the private sector

  | IP switch of the provider: 192.168.0.162/29. ------ | Reference Dell 6248 ip: 192.168.0.164/29 | ------ | Halon SX 200 ip: 192.168.0.166/29 |

  A Halon router for ip tracetroute: 192.168.0.163 says:

  1 192.168.0.164

  2 192.168.0.163

  Should not go directly to 192.168.0.163 with 1 jump? Am I missing something here?

  I've implemented a quagga and two HP Procurve 2626 router and could not reproduce the problem.

  Does anyone know if I'm missing something? In theory I should be able to simply get 1 jump to one IP address on the same subnet - right? Feels like the Dell switch made unnecessary routing...

  
  

• Circuits/server on the same subnet as the management network

  I'm having a difficult time for a virtual PC running on my server ESXi.  The IP address is on the same subnet as the management network statically assigned IP address.  The switch that is connected to the server port is trunking.  My question is, can devices on the same subnet as the management network?  If so, how do access you?  You have to create a new vSwitch for this?  Any help would be appreciated.  Thank you.

  Your portgroup for CUP7 is set to VLAN 1, while your progroup vmkernel port has no encapsulation VLAN defined.  Just change the portgroup to CUP7 to have no value in the box VLAN (its under settings for the portgroup).

  -Matt

  VCP, vExpert, Unix Geek

• How to determine if 2 IPs are on the same subnet

  Hi all!

  I have a Client/Server connection over a network, and I wants to determine if they are part of the same subnet.

  The server is installed on one OR cFP-2220, so I can't use all the exec system commands to access network settings.

  My code is so far simply determine if the client and server are both on the local host.

  Please see attachment!

  Concerning

  Paul

  Hello!

  Thanks for the reply.

  After a google search, I think it is the right way to do it: (Ref)

  XOR (B and H) (M & a)

  

  Thank you to direct me in the right direction!

  Kind regards

  Paul

• Case 'not the same subnet mask' - WRT54GL

  Hello

  I recently bought a WRT54GL router and tried to feed it with data from my ISP.

  I entered these data to my Windows system as well as my older router and it worked fine.

  These are:

  IP: 213.211.57.xx

  Subnet mask: 255.255.255.0

  Gateway: 213.211.56.1

  However, I get the error "not the same subnet mask" described here .

  If I run "ipconfig/all" to the machine which can be used to connect to the net, I don't get any additional useful info that I described here, (he is also in Czech :-)

  And there is no obvious conclusion in this forum thread.

  Any suggestions?

  Kind regards

  Matej

  OK, so I've solved this by changing the bridge and it works now.

  Interesting that windows was able to deal with him, but...

• Several groups of PS in the same subnet

  Is there something wrong with having two PS series groups (and, therefore, their members) in the same 24 subnet and the same VLAN?  We have a PS Group in the same place we are moving to another site that already has a PS Group.  We would like to just take advantage of the networking and configuration of VLAN, that we have so I just want to check that it is not a problem to do this.

  Thank you

  Bryan

  Hello Bryan,

  The only limits are the IP addresses available, switch ports available and that the switch can handle the load increases.  Especially if you share the SAN and LAN traffic to the same switch.  Also the link between the switches might need to increase as well.

  There is nothing inherit in the design to prevent it.   In my lab, I have quite a bit on the same subnet.

  Kind regards

• Eql different groups on the same subnet

  Hello

  Quick question...

  We have a PS6000 four in a group of storage in an iscsi network 192.168.0.0/24. We have now bought two PS6100XV and think about maybe create another group of storage for the new boxes eql. The reason is in the future, upgrade to 10 GB on the new group.

  The question is if we create a new group to the PS6100VX, is it necessary to have a new iscsi LAN with a different IP subnet or can we use the same subnet 192.168.0.0/24 as PS 6000 are on?

  You can stay on the same subnet.   Your switch is the limiting factor.

• On Pix VPN tunnel to the same subnet

  I have a customer who want to set up a the PIX VPN tunnel located on each site. For some reason, each side has the same subnet number, for example. 10.10.10.x/32. I'm sure we must run NAT, but is it possible.

  This can help

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800949f1.shtml

• Cannot open a Web site on the PCs of users, but the CD/DNS server in the same subnet to open it

  I'm trying to access a website of all pc sales and got an "Internet Explorer cannot display the webpage" error, but when I try it on a domain controller that is also a DNS server in the same subnet, I am able to access.  PC client when I ping the site I want access to I got "Request timed out" but not on the CD/DNS server.  Can someone please?

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I hope this helps.

• What are the vSphere components must be on the same subnet?

  VSphere components, those who need to be on the same subnet / vLAN?

  For example:

  vCenter Server and ESXi hosts?

  Groups separated from ESXi hosts are on separate VLANS / subnets? What is the limit of the number of hosts ESXi I should have on one vLAN to avoid having too much broadcast traffic?

  vCenter Server and he associated with SQL Server?

  VMware Update Manager and vCenter Server?

  VMware Update Manager and ESXi hosts it updated?

  There is no technical requirement that vSphere components must be on the same IP subnet. You can have all the components on a separate and routed (or even a firewall, you implement granted sufficient rules) subnet without problems. If that made sense, however, is a completely different question.

  vCenter Server and ESXi hosts?

  Does not really matter, but makes the most sense to be on the same subnet.

  Groups separated from ESXi hosts are on separate VLANS / subnets? What is the limit of the number of hosts ESXi I should have on one vLAN to avoid having too much broadcast traffic?

  If they are managed by the same vCenter, or similar commercial purposes, I would put them on the same subnet. I only consider something a subnet extra for things like DMZ-Clusters, that can be distinguished from any other as much as possible. A vMotion VLAN cluster might be a correct point in a normal scenario too.

  ESXi hosts really do not generate any significant broadcast traffic, apart from a few ARP requests here and there. This isn't Windows, after all, and even if that were the case, the time when you had to worry about the reasons broadcasting with 'only' a few hundreds or thousands of systems on a broadcast domain have long been more with the advent of fast and gigabit ethernet.

  vCenter Server and he associated with SQL Server?

  VMware Update Manager and vCenter Server?

  Even once it does not really matter, but I would put them on the same subnet unless I have a very good reason not to.

  VMware Update Manager and ESXi hosts it updated?

  As long as they are not connected via a WAN snail, causing the staging of updates hours, that's fine.

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• Is there a way I can share files between users on the same Mac without an internet connection?

  Hello world!

  Quick question here: is there a way I can share files between users on the same Mac without an internet connection?

  I have two users say that A and B. If I go the long way via the 'Go' menu > 'Computer', I ended up being told to contact my computer or the network administrator for assistance. Both users are admin one and file sharing is allowed in system preferences... I have to admit that I use 10.9.5 because my MacBook Pro would not work with OS Xs national parks.

  Any ideas would be cool because I'm sure that it used to work fine with "Snow Leopard" without being connected to the internet - or should I just send an email to myself and recover the files on the other user :-) to recover my USB is

  Choose go to folder from the Finder Go menu, provide/Users/Shared/as the path and place the files.

  (142147)

• HP envy 14-2090eo: can I use the same drivers for windows 8 and 8.1

  When I check in drivers which operating systems there are drivers available for my Hp Envy 14-2090eo, it says Windows 8 (64-bit) and Windows 7 (64-bit), "and im currently using Windows 7 64 bit" but does that mean the drivers to support these 2 Windows 8 and 8.1 of Windows operating systems, said in a different way "» : are the same drivers for Windows 8 and Windows 8.1?

  Best regards from hpenvy1

  Hello:

  Your model has the AMD/Intel switchable graphics.

  It is unlikely that the W8 AMD graphics driver will work on W8.1.

  Normally, you can use some of the drivers W7/W8 on W8.1, but the graphics is very doubtful - not switchable graphics anyway.

  You can run the windows 8.1 upgrade wizard and see what it reports.

  http://Windows.Microsoft.com/en-us/Windows-8/Upgrade-Assistant-download-online-FAQ

• I added a DVI monitor to my XP computer. I want to thank the display, but I have the same display on both monitors.

  The VGA and DVI monitors show the same screen.  Both monitors are not displayed on the display properties/settings tabl

  Hello

  What is the brand and model of the video card?

  Also check the wiring to make sure they are properly attached and reinstall the video card drivers. It is possible that the graphics card does not support an office unified on several monitors.

  Here's how:

  1. click on the Start button.
  2. in the search box type devmgmt.msc, and then press ENTER.
  3. Select the video card device and right click on it
  4. now, select uninstall.
  5 restart the computer. This should install it a suitable driver for it.

  Reference:
  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658

  You can have a look at this Microsoft article for instruction on setting up two monitors:
  http://support.Microsoft.com/kb/307873