Publish all by accessing the community of Demantra

Similar Questions

• Publish all by accessing the data in the row selected in the table of the ADF...

  Hello
  
  I try to get the data of the selected line in the bean on the change of SelectOneChoice in a column of table of the ADF.
  
  There are two definitions of node in the iterator. When I try to access the data in the row. I see that the first definition of node data.
  How to access the definition data another node?
  
  I'm trying to access the "sponsorId" of the iterator. I use the code below. But his return null pointer exception.
  
  The code I use to access the data in the row:
  
  DCBindingContainer links =
  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
  DCIteratorBinding = dcItteratorBindings
  bindings.findIteratorBinding ("sponsorIterator");
  ViewObject voTableData = dcItteratorBindings.getViewObject ();
  Line rowSelected = voTableData.getCurrentRow ();
  System.out.println (":" + rowSelected.getAttribute ("sponsorId")); I am able to see the data correctly for sponsorCodeDesc, sponsorPercentage, sponsorStatusDesc
  
  This is the iterator used for the table (page def):
  
  < Tree IterBinding = "sponsorIterator" id = "sponsor1" >
  < nodeDefinition DefName = "org.ieee.internal.ws.proxy.conf.types.ConferenceType.Sponsors.Sponsor"
  Name = "sponsor10" >
  < AttrNames >
  < item Value = "sponsorCodeDesc" / >
  < item Value = "sponsorPercentage" / >
  < item Value = lie "sponsorStatusDesc" = "sponsorStatusDesc" / >
  < / AttrNames >
  < accessors >
  < item Value = "sponsorDetails" / >
  < / accessors >
  < / nodeDefinition >
  < nodeDefinition DefName = "org.ieee.internal.ws.proxy.conf.types.SponsorType"
  Name = "sponsor11" >
  < AttrNames >
  < item Value = "sponsorId" / >
  < item Value = "sponsorName" / >
  < item Value = "isIEEE" / >
  < item Value = "isNonProfit" / >
  < item Value = "sponsorAcronym" / >
  < item Value = "sponsorDesc" / >
  < item Value = "sponsorEmail" / >
  < item Value = "sponsorComment" / >
  < item Value = "sponsorTypeId" / >
  < item Value = "sponsorTypeDesc" / >
  < item Value = "sponsorActive" / >
  < item Value = "societyNumber" / >
  < item Value = "businessUnit" / >
  < item Value = "createdBy" / >
  < item Value = "updatedBy" / >
  < / AttrNames >
  < / nodeDefinition >
  < / tree >

  you have not yet a selectionlistener linked to the table... to make the currentrow as the selectedRow...
  Can u please add the selectedRowKeys and the selectionlistener in the table as

  selectedRowKeys = "#{bindings.sponsor1.collectionModel.selectedRow} '"
  selectionListener = "#{bindings.sponsor1.collectionModel.makeCurrent} '"

• Lightroom Sdk: How avoid the re publish all after changing the settings of service?

  Hi all

  I'm working on a publishing service for lightroom. I would like to have the build of lightroom in the dialog box "you have changed the settings for this publish connection" to show.

  All my settings affects all pictures and we don't need to re publish all. But when users see this dialog box, they don't understand and re publish all a lot of time.
  It is useless and wasting time.

  I have no idea to avoid the tthat. I wish I could say (as for metadata) what parameters trigger a re publish action.

  Thank you for your help,

  All the best,
  Martin

  If you repost this in the Lightroom SDK forum, it is more likely, someone knowledgeable could see and answer.

• Basic question XML Publisher: how to access the tags in the higher levels?

  Hi all
  We have a fundamental question in the XML editor.
  
  We have an xml hierarchy as below:
  
  < CD_CATALOG >
  <>CATALOG
  CATALOG < CAT_NAME > 1 < / CAT_NAME >
  < CD >
  Heading1 < TITLE > < /title >
  ARTIST1 < ARTIST > < / ARTIST >
  < CD >
  < CD >
  Title2 < TITLE > < /title >
  ARTIST2 < ARTIST > < / ARTIST >
  < CD >
  < / CATALOGUE >
  <>CATALOG
  CATALOG < CAT_NAME > 2 < / CAT_NAME >
  < CD >
  Title 3 < TITLE > < /title >
  ARTIST3 < ARTIST > < / ARTIST >
  < CD >
  < CD >
  TITLE4 < TITLE > < /title >
  ARTIST4 < ARTIST > < / ARTIST >
  < CD >
  < / CATALOGUE >
  < / CD_CATALOG >
  
  We need to create a report as below:
  Catalog_name CD_TITLE CD_ARTIST CATALOG 1 HEADING1 ARTIST1
  CATALOG 1 TITLE2 ARTIST2
  CATALOGUE 2 TITLE 3 ARTIST3
  CATALOGUE TITLE4 2 ARTIST4
  
  So we have a loop at the < CD > Help for each CD. But when we are inside this loop, we cannot access the CAT_NAME value which is at a higher level.
  How can we solve this?
  
  Now, we use the workaround of set_variable and get_Variable. We are defining the value of CAT_NAME inside an outer loop and use it inside the loop internal using get_variable.
  Is the right way to do it, or are there better ways to do this? We run into problems when data within tables.

  You can use

  copy to your model

• Publish all in assessing the IOM Deployment Manager tool

  Hi friends,

  Whenever I try to open the deployment (of IOM Import/Export utility) Manager in any browser, I get error.

  Tried to check the java version & I don't see any problems there.

  Can someone help me with this?

  OIM 11g R1 (11.1.1.5) - Version

  Kind regards

  CVM

  Please check your security settings for java.  Must be an application called "Configure Java".  On the Security tab, set it to medium security.  In the lower section under the list of Site exceptions, add your server URL, without the port.  Example "http://myserver.com".

  -Kevin

• Confused about access to the community of MOS

  Hello

  As far as I can make out, the MOS community should be accessible by anyone with an active account of MOS.  that is if they can open a session support.oracle.com, the same user account must be able to access the community of MOS.

  Can someone verify if it is correct, or have I got it all wrong?  I can not find any documentation on this subject and can not access the Community (an "Unauthorized" error when I try to get), but am able to access MOS very well, so I would like to know if I need to make a ticket or if it's just that I have the wrong end of the stick.

  Thank you

  Phil

  I suggest create a non-technical SR.  Which must ensure that someone will look at the problem, with forums, it can be very hard to get the attention of the people you need when you cannot yet access the appropriate community.

  GlenG

• An error occurred when accessing the Windows CardSpace...

  So, I get this error message whenever I clicked on Windows CardSpace in Control Panel. "An error has occurred all by accessing the Windows CardSpace. Please see the the event log for more details. "I checked the event log and I read a bunch of posts which basically means the same thing. "An error occurred when communicating with the Windows CardSpace service." "" An unknown exception caused the request to fail. For more information, please see the event log. Inner exception: attempted to perform an unauthorized operation. ""An error occurrred while accessing the card collection.  The store directory or file ACL Bank had is shown to be altered. The ACL have now been restored to their default settings. ""An error occurrred while accessing the card collection.  Unable to open the store. »

  WHAT DOES THIS MEAN?
  

  I logged the administrator account and noticed that Windows CardSpace actually worked. Well, it's good to know he works at least on one account...

  I would try to make a new user account, but I haven't the time to copy everything back. I'm not seriously. Last week, I spent three hours to copy my files after reinstalling Windows. I really want to do it again.

  I read that this may be evidence of a corrupted user profile, but I don't get any messages on my user profile be corrupt.

  Is there an another fix for this error?

  Please help me with this, I know other people had this problem.

  Thanks in advance,

  ~ yosecchi1098

  Hello

  You can post your question here for assistance:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• On my iTouch Gen 5, to access the app store results by requiring a password to one account Yahoo, I deleted a year ago.  All other parameters recognizes my current e-mail and password.  I tried everything I can think of.  Ideas?

  On my iTouch Gen 5, to access the app store results by requiring a password to one account Yahoo, I deleted a year ago.  All other parameters recognizes my current e-mail and password.  I tried everything I can think of.  Ideas?

  What you are your trying to do?

  If you update the application, you enter log on the account that was purchased to update. It looks like your case.

• How to access the firefox on laptop Office keeping all the features?

  How to access the firefox on laptop Office keeping all tabs and bookmarks?

  Hello

  You may be able to do this in Firefox Sync configuration on both devices. Please see for detailed instructions.

• Why am I all of these positions of the community in my email?

  Why am I all of these positions of the community in my email?  There are hundreds of them.

  You are subscribed to these tips. Go to each of the areas that you do not want to receive email from and click the button in the upper right corner. If you run the ad-blocking software, you may need to temporarily disable.

  If you wish, you can instead click here and completely turn off notifications by e-mail.

  (139647)

• All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Additional information: the laptop is what I used to install all the music, via iTunes, which is located on the external hard drive connected through home network router.

  Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Laughing out loud

• How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time. Thanks for any help :)

  How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time.  I've just upgraded to El Capitan.  Thanks for any help :)

  I assume that you use the application overview.

  I can't find an answer to back up everything, but a workaround could be while the file menu options are visible, press the option key

  and the point of the window will become close, if you click on that dialogue will ask you if you want to restore the changes or save

  pressing Save will close the image with the changes and then move to the next image and so on.

• Can not access the site Web of John Lewis, get message server unexpectedly dropped the connection all the time

  Use the iMac with El Capitan 10.11.1 & Safari 9.0.1

  During the last week, I was unable to access the site Web of John Lewis and the message "Safari cannot open page www.johnlewis.com because the server dropped the connection unexpectedly. Sometimes this happens when the server is busy. Wait a few minutes and then try again"I retry but get the same message all the time. Can access all other sites ok.

  I emptied the cache, deleted the cookies and history. Enter the name of the site in its entirety is not helped either.

  Unable to access the Web by John Lewis site with my iPad either.

  Help!

  Try restarting/resetting the router.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• I get all the time can not download anything 'Windows cannot access the specified device, path or file. You can't have the permissions to access the have__appropriate element. »

  Original title: problems cannot do anything

  Windows cannot access the specified device, path or file. You can't have__appropriate the permissions to access the item. I get it all the time can not download anything

  Hi birdylod,

  ·         What version of the operating system is installed on the computer?

  ·         You did changes to the computer before the show?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         What files you download?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  For reference:

  What to know before applying permissions to a file or folder