PURGE LOG: Dependencies before the purge

Similar Questions

• Remove the archive logs from before the resetlogs

  Hello
  
  I use a cleanupscript to my archive logs. I work with a database of return of flame and running of tests, so I did a bit of resetlogs open in my DB.
  
  However, this script does not seem to take the archive logs away from before the resetlogs. Is there a way I can always make a backup of these easily?
  
  
  Run {}
  allocate channel t1 type disk;
  OVERLAP archivelog all;
  format of entry archivelog backup to remove sequences 5 ' / oracle/RMAN/backups/${SID}/backups/DISK_ARC_%d_%s.%p';
  current backup controlfile as ' / oracle/RMAN/backups/${SID}/backups/DISK_CTL_%d_%s.%p';
  output channel t1;
  }
  
  
  (until the 5:5 sequence is the last log applied on standby)

  If, once that you the database in resetlogs. can no longer needed the repository information, you tell me what you will do with these archives?

  still, you can keep in the repository as

  RMAN > catalogue archivelog 'archive_file ';

  then it will be registered in the repository

• How to purge the Workflow queue after upgraded to R12 before the Mailer WF?

  Hello
  
  We are about to upgrade to R12.1.3 of R11.5.9.
  
  As part of the test, I configured and started the workflow Mailer in the new system. As soon as I did, the system began to send only a ton of notifications of recent approvals of requisition apparently waiting in line in the system. WF Mailer has been down since I did the last upgrade test.
  
  We intend to approve applications from before the changeover in the old system, so there should be no e-mail notifications in the waiting. Is there a way to msg_state of these notifications was updated in the table wf_notification_out with a value of "READY", so we can ensure that we will have a clean system, and users will not receive notifications about recent requisition approvals?
  
  Thank you
  Sinan

  Please see these documents.

  Note: 847889,1 - emails of Notification Workflow stop during Clone
  Note: 828812.1 - how to stop the old e-mail Messages in Notification Workflow coming out during the activity of Clone
  Note: 603003.1 - how to remove Workflow on a Test or a cloned Instance data
  Note: 372933.1 - how to purge notifications by e-mail of the workflow queue so that the e-mail is not sent
  Note: 736508.1 - how to cancel e-mail for the particular Type of Workflow Notifications

  Kind regards
  Hussein

• Web application of timesheet before the user log on to the domain network

  We have Windows 2003 server where active directory is installed and used as a domain controller, we also have another server where our web timesheet application developed in .net is installed.

  What we would like to do is before any user logs on his computer that he must complete the timesheet of the yestarday, if there already fillied timesheets can log or the system must raise message to fill the first timesheet. UserCan bypass the timesheet for max 3 days after that the system does not allow the user to log on to the field and exhausted once the time sheets he can log.

  access to the application of the timesheet using ipaddress with connection by port.

  Kind regards

  Houria.

  It is just a bit beyond, issues of the support that we offer in these forums, because we support the public versions of Windows and their security.  I suggest you post this kind of question in the forums TechNet (http://social.technet.microsoft.com/Forums/en-us/categories), as this is where people from Active Directory and the server will be found.

• Windows Search 4 the program active with a log on before you can use the start menu. It is sometimes impossible to open an Office application.

  Original title: search Windows 4

  With Windows Search 4, the program active at the log on before you can use the start menu. Several search screens occur and reproduce when they are closed. Sometimes it's impossible to open an Office, research childcare opening application.

  Hi Ken_978,

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  ·         The question is only limited to Office applications?

  ·         What exactly happens when you try to open an Office application? You receive an error message?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Method 2: If this does not help then you can uninstall and reinstall Windows search 4.0 on the computer.

  Follow the steps below to uninstall:

  a. click on Start

  b. click Control Panel

  c. select Add / Remove Program

  d. place a check on "Show updates"

  e. you will see Windows Desktop Search 4.0 and uninstall it.

  Reinstall back, you can see the link below:

  http://www.Microsoft.com/Windows/products/winfamily/desktopsearch/choose/windowssearch4.mspx

  Hope this information helps.

• Establish the VPN connection before the user logged

  Hello world!

  Anyone know if it is possible to run the cisco vpn client and establish the vpn connection before the user logs (Windows 7)? How?

  Thanks in advance!

  You must Anyconnect VPN.

  use start before logon feature you can get the VPN before windows logon.

  There are a lot of configuration guide that you can find in CISOC regarding anyconnect SBL.

• After authentication redirecting before the user logged

  Version of apex 4.1, custom authentication based on users of the Oracle database.
  
  My goal is to allow a user to connect, and if their password is entered in the grace period (7 days before the due date, for example) they will be taken directly to a page to change their password, rather than the home page.
  
  
  I have a page on page 101 (login) process to check if a password is about to expire (triggers a warning 28002). If this is the case, I store the warning message in a part of the application, "AI_LOGIN_WARNING".
  
  In my custom authentication module, I have a post_authentication procedure: -.
  
  ------------------------------------------------
  PROCEDURE post_authentication
  IS
  
  BEGIN
  
  IF INSTR (: AI_LOGIN_WARNING, ' 28002') > 0
  THEN
  htmldb_application.g_unrecoverable_error: = TRUE;
  owa_util. REDIRECT_URL ('f? p =' | v ('APP_ID') |) ': MY_ACCOUNT:' | v ('APP_SESSION'));
  END IF;
  
  END post_authentication;
  -----------------------------------------------
  
  where 'MY_ACCOUNT' is the alias of page for a page to allow the user to change his password.
  
  There is a process on the MY_ACCOUNT page to change a password by calling a database procedure, passing in parameters p_lid = >: APP_USER, p_password =: P103_NEW_PASSWORD:
  
  --------------------------------------------------------------------
  PROCEDURE change_own_password
  (p_lid IN VARCHAR2,
  p_password IN VARCHAR2)
  IS
  
  e_not_current_user EXCEPTION;
  
  BEGIN
  
  IF p_lid! = V ('APP_USER')
  THEN
  RAISE e_not_current_user;
  END IF;
  
  EXECUTE IMMEDIATE 'modify user ' | V ('APP_USER') | ' identified by ' | p_password;
  
  
  EXCEPTION
  
  WHEN e_not_current_user
  THEN
  RAISE_APPLICATION_ERROR (-20010, ' you can't edit another user "password is).
  
  END change_own_password;
  ---------------------------------------------------------------------
  
  
  
  The first problem is that the app only redirects to the MY_ACCOUNT page if it is set to the Public.
  If it is set to the Public, when I try to change my password I get the following error: ORA-01918: there is no such thing as 'NOBODY' user.
  If I put APP_USER programmatically I get ORA-20010 ' you can not edit another user "password is error.
  
  
  I seems as if I am redirected to the MY_ACCOUNT page before I was connected, even if the diversion is called in the later part of the AUTHENTICATION of my authentication scheme.
  
  How can I make sure that Apex connect me before re - direct?
  
  Thank you.

  Hello

  * Remove the message authentication process
  * Creation of a branch in Page 0 or your homepage (before header) that redirects users 'Change password page' and set the condition so it runs only when it meets your requirement.

  That should do the trick.

  Kind regards
  Hari

• Expectations extended on synchronization of log file while the parallel writing journal is fine

  We have 9.2.0.8 as experiences of long waits on the database log file sync (average waiting time = 46 ms) while waiting for the log file write Parallels is very good (average waiting time is less than 1 millisecond).

  The application is of type middleware, it connects to several other applications. A single user in a single application action train several requests to send back through this middleware, so he needs response time of db in milliseconds.

  The database is quite simple:

  -It has a few config tables that the application reads but rarely updated

  -She has table TRANSACTION_HISTORY: the application inserts records into this table using Insert einreihig (about 100 lines per second); each insert is followed by a validation.

  Records are kept for several months and then purged. The table has only column VARCHAR2/NUMBER/DATE, no LOBS, LONG, etc. The table has 4 non-unique single-column index.

  The average line length is 100 bytes.

  The load profile does not appear something unusual, the main figures: 110 transactions per second average transaction = 1.5 KB size.

  The data below are to 1 hour interval (purge wasn't running during this interval), physical reads or writes physical rate is low:

  Load profile

  ~ ~ ~ Per second per Transaction

  ---------------       ---------------

  Size: 160,164.75 1,448.42

  Logical reads: 521,58 57 675,25

  Block changes: 934,90 8.45

  Physical reads: 76,27 0.69

  Physical writings: 86,10 0.78

  Calls of the user: 491,69 4.45

  Analysis: 321,24 2.91

  Hard analysis: 0.09 0.00

  Kinds: 126.96 1.15

  Logons: 0.06 0.00

  Runs: 17.70 1 956,91

  Operations: 110,58

  
  

  Top 5 events are dominated by the synchronization of log file:

  Top 5 timed events

  ~~~~~~~~~~~~~~~~~~                                                     % Total

  Event expects Ela time (s)

  -------------------------------------------- ------------ ----------- --------

  401 608 18 448 59.94 file synchronization log

  db file parallel write 124 044 3 404 11.06

  CPU time                                                        3,097    10.06

  Enqueue 10 476 2 916 9.48

  DB file sequential read 261 947 2 435 7.91

  
  

  Section events:
  

  AVG

  Total wait wait wait

  Hour of wait time wait for the event (s) (ms) /txn

  ---------------------------- ------------ ---------- ---------- ------ --------

  Synchronize 0 401 608 46 18 448 1.0 file log

  db file parallel write 124 044 0 3 404 27 0.3

  Enqueue 10 476 277 2 916 278 0.0

  DB file sequential read 261 947 0 2 435 9 0.7

  buffer busy waits 11 467 67 173 15 0.0

  SQL * Net more data to the client 1 565 619 0 79 0 3.9

  lock row cache 2 800 0 52 18 0.0

  control file parallel write 1 294 0 45 35 0,0

  Log end of switch file 261 0 36 138 0.0

  latch free 2 087 1 446 24 12 0.0

  PL/SQL 1 1 20 19531 0,0 lock timer

  log file parallel write 0 143 739 17 0.4 0

  db file scattered read 1 644 0 17 10 0.0

  sequential log file read 636 0 8 13 0.0

  
  

  Log buffer is about 1.3 MB. We could increase the log buffer, but there is no log buffer space waits, so I doubt this will help.

  
  

  Newspapers in recovery have their own file systems, not shared with the data files. This explains the difference between waiting avg on parallel writing of log (less than 1 ms) file and db file parallel write (27 ms).

  Restoring logs is 100 MB, there are about 120 journal switches per day.

  
  

  What has changed: the pads/validations rate grew. Several months ago there were 25 inserts/validations per second in the TRANSACTION_HISTORY table, now get us 110 inserts/validation per second.

  
  

  What problem it causes application: due to slow down the reaction of the basis of the application (Java-based) requires discussions more and more.

  
  

  MOS documents on synchronization of log file (for example, 1376916,1 waits for troubleshooting "log file sync") recommend to compare the average waiting time on synchronization of log file and the log file parallel write.

  If the values are close (for example log file sync = 20 ms and log file parallel write = 10 ms) so expectations are caused by nits IO. However, it is not the case here.

  
  

  There was a bug (2669566) in 9.2 which resulted in underreporting lgwr parallel time of writing to the log file. I was talking about September 2005, during which the bug was present in 9.2.0.6, reported 10.1 fixed in: file parallel journal written (JL Comp) it is possible that your problem IS written to the log file.

  Concerning

  Jonathan Lewis

• I can not burn any DVD or CD - burning interruptions of processes before the end

  Hello world!
  Sorry for my bad English, but I guess you're all updated on the Jesus are not very good in English.
  I have the following problem: I can't burn a cd or dvd. I already tried with different programs such as Sonic, Nero 7.0, I Tunes and every time I have an error that interrupts the burning process before the end.
  So I don't know what to update! I already tried to re install the drivers, but it's didtn can't change anything.
  To help you, I saved a nero error log. I hope it could be useful to someone who could help me!
  Here is the log:
  me

  5 82001080000000000666822849

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 164112 bytes, created 02/11/2004 13:54:32

  NT-SPTI used
  Nero Version: 7.0.0.0
  Recorder: Version: 1.60 - HA 1 YOUR 0 - 7.0.0.0
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected:?
  CD-ROM: Version: 1.60 - HA 1 YOUR 0 - 7.0.0.0
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: FUJITSU MHV2100BH PL atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD-RAM UJ - 841S atapi Port 1 ID 0 DMA: on
  CdRomPeripheral: COACH CD/DVD-ROM 2. 1B axvodka Port 2 ID 0 DMA: Off

  = CDRom-Device-map =.
  CARPET * a DVD-RAM UJ - 841 S D: CDRom0
  COACH CD/DVD-ROM F: CDRom1
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 83886080 (0) bytes
  ShowDrvBufStat: 0
  BUFE: 0
  Physical memory: 2045 MB (2095084kB)
  Free physical memory: 1277 MB (1308144 KB)
  Memory used: 37%
  QUERIES PFiles: 0x0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  21.9.2006
  CD-ROM (ISO)
  21:04:46 #1 text 0 file Isodoc.cpp, line 6410
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: TRUE
  Write: TRUE
  Finalize the CD: FAKE
  Multisession: TRUE
  Multisession type: Start multisession
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  21:04:47 #2 text 0 file Burncd.cpp, line 3007
  CARPET * A DVD-RAM UJ - 841S
  SmoothLink activated

  21:04:47 #3 text 0 file ThreadedTransfer.cpp, line 525
  ReadBuffer-Pipe got 81920KB of memory

  21:04:47 #4 text 0 file Reader.cpp, line 124
  Player running

  21:04:47 #5 text 0 file Writer.cpp, line 113
  Writer D: MAST * A DVD-RAM UJ - 841S race

  21:04:47 #6 ISO9660GEN-11 file Geniso.cpp, line 3304
  First address writeable = 0 (0x00000000)

  21:04:47 #7 text 0 file Burncd.cpp, line 3301
  Turn on Track-At-Once, using CD-R/RW media

  21:04:48 #8 Text 0 File DlgWaitCD.cpp, line 277
  Last possible write address on media: 359844 (79:59.69)
  Last address to be written: 318786 (70:52.36)

  21:04:48 #9 Text 0 File DlgWaitCD.cpp, line 289
  Write in overburning mode: No. (enabled: CD)

  21:04:48 #10 Text 0 File DlgWaitCD.cpp, line 2568
  Recorder: MAST * a DVD-RAM UJ - 841S

  21:04:48 #11 Text 0 File DlgWaitCD.cpp, line 456
  > Protocol of DlgWaitCD activities:
  =========================================

  21:04:48 #12 text 0 file ThreadedTransferInterface.cpp, line 846
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 318787 (318787) original disc POS = #318787 / 70:50.37
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318785 blocks [D: MAST * a DVD-RAM UJ - 841S]
  --------------------------------------------------------------

  21:04:48 #13 text 0 file ThreadedTransferInterface.cpp, line 1058
  Prepare recorder [D: MAST * a DVD-RAM UJ - 841S] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Closed disc, session not obsessed
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 653182976, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | _RecDep___ _
  -150 | Lead-in | 0 | 0x41. 0x00
  -150 | 1. 0 | 0x41. 0x00
  0 | 1. 1. 0x41. 0x00
  318787 | Lead-out | 1. 0x41. 0x00

  21:04:48 #14 text file ThreadedTransferInterface.cpp 0, line 1126
  Removed 2 blocks from end of track 1. Length: 318787-> 318785.

  21:04:48 #15 text 0 file SCSIPassThrough.cpp, line 34
  SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

  21:04:48 #16 phase 24 file dlgbrnst.cpp, line 1724
  Caching of files started

  21:04:49 #17 text 0 file Burncd.cpp, line 4129
  Cache writing successful.

  21:04:49 #18 phase 25 file dlgbrnst.cpp, line 1724
  Caching of files completed

  21:04:49 #19 phase 32 file dlgbrnst.cpp, line 1724
  Simulation started at 24 x (3 600 KB/s)

  21:04:49 #20 text 0 file ThreadedTransferInterface.cpp, line 2669
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  21:04:49 #21 text 0 file MMC.cpp, line 21541
  Set BUFE: SmoothLink-> ON

  21:10:08 #22 text 0 file ThreadedTransfer.cpp, line 228
  all writers idle, stopping conversion

  21:10:10 #23 phase 33 file dlgbrnst.cpp, line 1724
  Simulation completed at 24 x (3 600 KB/s)

  21:10:11 #24 phase 36 file dlgbrnst.cpp, line 1724
  Burn process started at 24 x (3 600 KB/s)

  21:10:11 #25 text 0 file ThreadedTransferInterface.cpp, line 2669
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  21:10:11 #26 text 0 file MMC.cpp, line 21541
  Set BUFE: SmoothLink-> ON

  21:12:16 #27 SPTI-1040 file SCSIPassThrough.cpp, line 306
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1040)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Printing Code: 0x10
  Meaning of Qual: 0x00
  The CDB data: 0x2A 00 00 01 76 00 00 20 00 00 00 C0
  Sense area: 0xF1 00 03 00 01 74 5 0 a 00 13 00 00 10
  Buffer x 03390000: Len x 10000
  0 X 72 F1 E5 87 D3 3D 4A 96 F9 B0 73 83 14 72 A1 D3
  0XF3 49 6 93 44 25 04 6 E5 THIS 44 5F 3RD 79 47 C6
  DD EE 0XDD 3A FD 4 71 D CB F3 4B 18 BD 7 D DF 35 32

  21:12:16 #28 COR-1040 file Writer.cpp, line 302
  Illegal block order size
  D: MAST * A DVD-RAM UJ - 841S

  21:12:16 #29 Text 0 File ThreadedTransfer.cpp, Line 228
  all writers idle, stopping conversion

  21:12:17 #30 text 0 file ThreadedTransfer.cpp, line 222
  conversion idle, stopping reader

  21:12:17 #31 CDR - 201 file WriterStatus.cpp, line 200
  Invalid write state
  D: MAST * A DVD-RAM UJ - 841S

  21:12:17 #32 TRANSFER file-18 WriterStatus.cpp, line 200
  Could not perform PlageFin

  21:12:17 #33 text 0 file MMC.cpp, line 16273
  start closing a Session

  21:12:30 #34 SPTI-1040 file SCSIPassThrough.cpp, line 306
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1040)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Printing Code: 0x10
  Meaning of Qual: 0x00
  CDB data: 0 x 00 00 00 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 71 00 03 00 00 00 00 0 to 00 13 00 00 10

  21:12:30 #35 COR-1040 file WriterStatus.cpp, line 249
  Illegal block order size
  D: MAST * A DVD-RAM UJ - 841S

  21:12:30 #36 TRANSFER file-19 WriterStatus.cpp, line 249
  Could not perform fixation

  21:12:30 #37 text 0 file WriterStatus.cpp, line 258
  falling back to disc fixation

  21:12:30 #38 text 0 file MMC.cpp, line 16273
  start closing a Session

  21:12:30 #39 SPTI-1046 file SCSIPassThrough.cpp, line 306
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1046)
  Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Printing Code: 0 x 30
  Meaning of Qual: 0x05
  The CDB data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 70 00 05 00 00 00 00 00 00 30 05 AA a 0, 00

  21:12:30 WriterStatus.cpp - 1046 file CDR #40, line 249
  Illegal disc
  D: MAST * A DVD-RAM UJ - 841S

  21:12:30 #41 TRANSFER file-19 WriterStatus.cpp, line 249
  Could not perform fixation

  21:12:30 #42 phase 38 file dlgbrnst.cpp, line 1724
  Burn process failed at 24 x (3 600 KB/s)

  Existing drivers:
  File ' Drivers\PXHELP20. SYS: Ver = 2.03.32a, size = 20640 bytes, created 25/04/2005 11:03 (Prassi/Veritas driver for win 2 K)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  So, thank you!
  Next time!
  Roman

  Hello

  The error log doesn't provide very useful information.
  According to this error log, the simulation was running OK, but the burning process has not been started.
  In such cases, it is very difficult to say why it happens. Maybe the drive is damage and cannot calibrate the lens correctly or using media is not compatible.
  Burning the process depands on the fields and the data that prefer to burn.
  Data, CD, DVDs are encrypted and it s is not possible to burn and copy it.
  In other cases, you can also try to burn media with low speed and not with 24 x.

  But to sentence case you the reader has a malfunction and you need to replace ;(

• HP Officejet 7400 series: installing software HP all-in-one cancels before the end

  After the upgrade to Windows 10, my HP OfficeJet 7400 (wireless) series has lost the ability to analyze.  The HP Solution Center responds with the message "cannot run because your installation of the device is not complete.  I ran printing HP and doctor Scan and it said that "the complete office solution for your product is not installed on this computer" (even though it worked fine w/Windows 7 before the upgrade).  Continuing through the stages of printing and doctor Scan, you are prompted to install the software all-in-one series I initiative.  He gets successfully to the menu of Options of Installation of revision.  I check out the review and accept the check box and click Next.  At this point, it passes to the "prepare the system for the installation" and for the briefest of moments he says software removal.  But then the operation will stop and the program ends without having to install the software and drivers.  I found a log file pushing files and shows that I am an ERROR_INSTALL_USEREXIT 1602 - the user cancels the installation.

  Although my situation seems to be a bit different that other issues addressed in the forums of HP, I've tried every fix suggested in those and nothing works.   I also downloaded Windows Scan and scan HP and Capture and cannot find my scanner.  The print function, however, works with the supplied Windows 10 driver.

  Any thoughts?  Thank you!

  Hello @Bill_M1,

  This is a great place to visit for a community support and HP! I see that you are not able to scan and you encounter problems during installation. Thank you for providing all of the steps that you have already tried. I wish I could help you.

  I would uninstall the old printer drivers Windows 7 install and reinstall the most recent drivers.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.

  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  Here is the driver: Full_Webpack - 140.0.408 - 5-AIO_CDB_FSW_Full_Win_WW_140_408 - 5.exe

  How is the printer connected?

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.

• "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

  Hey all,.

  I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

  Hi tripleb316,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• When you log in to the user account, icons and start menu missing only to see Office XP

  After that, I don't connect to my side user all the watch is the background... no whole... start the taskbar button are missing and icons... I can't even right click... . How can I fix?

  * original title - after that I cannot connect to my side user all the watch is the background... no whole... start the taskbar button are missing and icons... I can't even right click... . How can I fix? *

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · Do you remember all the recent changes on the computer before the show?

  Try the steps listed in the link below: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Whenever I try to log on to the administrator account, it will start to connect, but immediately disconnected return.

  Original title: why my account automatically disconnect?

  I am running Windows Vista Home Premium.

  Whenever I try to log on to the administrator account, it will start to connect but then before he's even changed screens, immediately disconnect back.
  I can connect to it using safe and I ran Anti-malware, Microsoft Security Essentials and Advanced System Care and they have all come without any problem.
  Now, I guess I'm using an account with administrative privileges but different. I just need to open Windows Media Center, but every time I try, it says: I'm on the guest account. My machine won't let me create a new account, delete other accounts, or even to change the passwords. In addition, a random ASP.NET account appears and I can't remove it.
  I don't understand what I could do wrong. Any help is greatly appreciated.

  Hi Jorgomli,

  1. you receive messages or error codes when you try to connect?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  Because you can connect to the account administrator in safe mode, you can try to create a new safe mode administrator account and check.

  Check out the link:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Step 2:

  If still face problems, then you can try setting the default Administrator account and check if you can solve the problem.

  a. click the Start button

  (b) in the Start Menu, click all programs followed accessories

  c. in the menu accessories, right-click on command line option

  d. in the drop-down menu that appears, click on the "Run as Administrator" option

  e. If you have the User Account Control (UAC) enabled, you will be asked for permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  f. in the command prompt window, type the command net user administrator / Active: Yes and press ENTER.

  g. close the elevated command prompt.

  h. log (in the Start Menu) and you will see your new administrator integrated next to your current account.

  i. click the photo icon display built-in Administrator account and connect to it.

  If the problem is resolved, then you can create a new administrator account and check.

  You can try to create a new administrator account by following the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  You can also try disabling the default Administrator account using the command

  NET user administrator / active: No.

  Hope this information is useful.

• Windows Media Player 11, 20 seconds before the end of a track, and if there is another upcoming track, sound, jumps cracks, breaks upward.

  Original title: dissolution - log jam - sounds 20 seconds before WMP 11 goes from the current track to the other.

  Windows Media Player 11. 20 seconds before the end of a track, and if there is another track to come, the sound cracks, skips, breaks upward. A check in the Task Manager indicates that only when that happens all of a sudden the wscsvc service uses a lot of cpu. All of a sudden, the problem occurred two days ago. I had no explicit amy changed security - but standards updated Windows and McAfee took place.

  As expected Windows difficulty he finds no problem.

  Hi Janssons Frestelse,

  Good to know that you were able to resolve the issue and I thank you for updating the same.

  About the audio driver, you can try uninstalling and reinstalling the sound card and check.

  a. Click Start and type devmgmt.msc, and then Enter.

  b. expand sound, video and game controllers.

  c. right-click on the sound card and choose uninstall.

  d. restart the computer and check

  You can also check the manufacturer's website and try to download the latest verion of Windows Vista audio drivers and check.

  Check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Concerning

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.