Purple wide screen of death on the new Intel Server QSSC-S4R

Similar Questions

• We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

  We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
  0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

  If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

  Then do a repair installation.

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

• PowerCLI Script to migrate virtual machines with the same network Source for the new vCenter Server.

  Hi all

  I checked a few posts on the migration to the new vCenter Server virtual machine. But I'm not very good with Powercli and need some help here.

  We have a new vCenter server where we migrate virtual machines from one source vCenter server. Here are two things that I don't know how to connect together to make sure that bwfore we turn on the virtual machine to the virtual machine is connected to its source network.

  Part 1 - this script works well but do not get any network on the vCenter destination.

  cluster = Get-Cluster "clusterA.

  $inventory = get-Cluster $cluster | Get - VM | Add-Member - MemberType ScriptProperty-name "VMXPath" - value {$this.extensiondata.config.files.vmpathname}-Passthru-Force | Select-Object Name ResourcePool, folder, VMXPath |

  $inventory | Export-Csv c:\file.csv

  $inventory = import-csv c:\file.csv

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  Part 2 - I want to preserve the Portgroup macaddress and the Ip of the virtual computers and connect them to the new vCenter. How can I do this with the script below. Or how can I combine them together?

  $vm_list = get-Cluster-name "clustera | Get - VM test * | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  Step 2

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-RunAsync Verbose - confirm: $false

  Step 3

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool.Name

  New-VM - ResourcePool (ResourcePool-Get-name $resource_pool) VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  Step 4

  # Put the network cards

  foreach ($info in $inventory)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose-RunAsync-confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null}

  }

  Thanks in advance for any help.

  Hi all

  I made some changes to the script and it worked for me. We have added a host on the destination with all exchanges and storage mapped vCenter.

  $vm_list = get-Cluster-name 'Site B - b | Get - VM | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-Verbose - confirm: $false

  $cluster = get-Cluster "Site A - clustera.

  {foreach ($vm to $information)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm.path - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool

  New-VM - ResourcePool (ResourcePool-Get-name "test1") VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  # Put the network cards

  .

  foreach ($info in $information)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose - confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null

  }

  Hope this will help many of you.

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• Pics of member comments on all hosts on the new esx Server

  Peaks mem comments on all hosts on the new esx server, but the operating system does not use the amount of memory.

  The results are same vm running on the esx servers

  HP DL380 G6

  Dual Core CPU 8

  Xenon E5520 2.27 GHz Intel

  VCA mode Intel Xenon 45 nm Core2

  Guest mem 95% +.

  HP DL380 G5

  Dual Core CPU 8

  Intel Xenon X 5450 3.00 GHz

  VCA mode Intel Xenon 45 nm Core2

  Guest mem typically 25-35%

  The 3 peaks located on the new server.

  The new G6 in the memory market settles after a while if I put manually:

  Use Intel VT-x/AMD-v for virtualization and EPT Intel/AMD virtualization MMU nec training

  If I move G5 servers all right, move them back it culminates on mem. waited for itself if it settles, but no go.

  PS we put in CVS mode on the cluster.

  New servers booted on peak still G6 mem comments.

  Any thoughts?

  You have to refer to this before KB ?

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• HP deskjet 1510: blue screen of death with the installation of the printer

  I installed a new HP 1510 about 3 weeks, no problem... then there's 5 days started to have the blue screen of death (BSOD) on & above.   Several hours and attempts to update other drivers, I uninstalled the printer, did a system restore and it worked fine. No BSOD more.

  Waited 2 days, for sure - then reinstalled and the same thing all over again.  So have uninstalled and reinstalled 3 times.

  Ran malware and virus program and nothing came. At the end of my mind - help, please!

  I solved the problem by moving to a port 2.0, restore to an earlier time, and then reinstalling.

• Blue screen of death after the update installed at startup upward.

  I have windows xp sp3 after installed updates don't know which ones, because the installed when I stop and 52 of them there I now get a blue screen of death which says:

  Stop: c000007b {bad image}

  The application or DLL? \c:\windows\system32\winsrv.dll is not a valid windows image. Please check this against your installation diskette.

  I can't go to the safe mode get the same error and same with the last known good configuration. I can't even to safe mode command prompt, system, or debug mode recovery still giving me the same error. I repaired windows 3 times already and the same thing happens each time after that some update that I don't know he messes all this. Give me advice. I have antivirus Iola system mechanic. I think just to wipe the entire disk and do a clean install if you do not have anything else to tell me I'll do it, but I don't know if that even the problem will be solved because there seems to be a problem of windows software update. I also notice from the internet explorer 7 installed it stops working a few flashes upwards on you whenever you try to open it up if it's maybe part of the problem too. I do not plan to let internet 7 install go into all this time.

  Install the updates one at a time or 5 at the time may not be a bad idea.  Then when it breaks watch you and see if one of those is eager to replace your winsrv.dll file.

  You said you DO or DO NOT have to System Mechanic configured to run at startup?  Sometimes after installation of the updates, who see the new files (and if they are obsolete), can interpret the new legitimate files to be a threat.  If you could get started and uninstall that (at least temporarily) that would eliminate this possibility of this equation of many variables.

  The Dell has a number of service tag sticker and if so what does it say?  You can search for things by service number

  You should make a bootable CD of XP (no XP media required) Recovery Console.

  You see, Microsoft support engineers won't tell you how to do this either - since there is not an article of KB Microsoft Bing and link to.

  If you have a SATA drive, which will give you another challenge because you need to maybe get into BIOS and temporarily change the disk other than SATA configuration mode so the Recovery Console will be able to see, replace the suspicious winsrv.dll file, change the SATA drive and reboot...

  First, do the XP Recovery CD of Console and if you are able to use a system of work to ensure that the CD you made at least boots (you don't have to "do" something with it), which would be a good thing.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• Which screen is best for the new laptop

  I am a photographer of nature pro and you are looking to buy a new convertible laptop and I decided on the spectrum of HP 360 x 13.3 inches. I'll be using it for travel, showing pictures to clients and on the road, making a few changes on the images. This is not my main editing tool, but when you travel for long periods, I would not share a few images.

  
  HP offers two screens:

  13.3 "diagonal QHD + FPS BrightView - backlight WLED (3200 x 1800)

  or

  13.3 "diagonal QHD UWVA BrightView backlight OLED compatible multitouch glass (2560 x 1440) on board edge

  For the race of lightroom and photoshop and make a few changes. Which screen is best?

  I'm not really familiar with OLED, but it seems that the main selling point is deep blacks. It is very good for watching movies and virtually nothing else. If you work for printing, so jet of ink or offset, she has a problem of pure and simple. Obviously, no drop-down list paper/ink never remotely cannot match - and if you're in there for a monumental disappointment when you see the result.

  The objective is always of "what you see is what you get". This means lower the contrast on the screen ratio.

  I keep my Eizos calibrated to 0.5 cd/m² dark purposes most - which is actually high enough - to get a good screen to print match. For some work on Matt paper I go as high as 1.2 cd/m².

  The other advantages of OLED - wide angles of vision and the wide range of colors - are already covered by IPS/PLS/AMVA existing panels.

• Safari gave me a blue screen of death, calling the Microsoft blue screen of death after installing Adobe flash player. The van is responsible for me to a Microsoft third-party technical support I did not trust anyone at - he had a problem with Adobe flash

  Safari gave a blue screen of death after downloading Adobe flash player do not have access to in-house. Big sign telling me that my computer from Microsoft was blocked and to call this number that was, according to the individual, I spoke, a third party provider working for. Microsof. Everyone knows this. I do not trust them especially when they declared they wanted to log into my calculation. Is there one resolution other than OS X Recovery?

  There are hundreds of these sites to scam out there. Nothing has been installed on your Mac, or even downloaded to. The goal of each of them should Miller get so much money that you're ready to spit. Good thing you cut them and not give them access to your Mac.

  The usual simple solution is Force Quit Safari. Hold down the SHIFT key, and then restart it. The SHIFT key tells Safari don't not to load the previous sites.

• Qosmio G25: blue screen of death in the course of watching TV

  I also get the blue screen of death (Qosmio G25) and without apparent reason. I just watch a HD channel for an hour and it just hangs at random while the TV was going on. His crashed a few times before that too. But the strange thing is that I never changed anything, I just watched TV and went to the blue screen with the code everywhere.

  Does anyone else have this problem?

  Kind regards
  Stephen

  Hello

  AFAIK the Qosmio G25 was designed for the American market.
  All laptops that end in 5 are for the U.S. market.
  However, it is not easy to say why it happens.
  I assume you are using the image of Toshiba's own operating system.
  I checked the driver Toshiba U.S. page and found a few drivers.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp?

  You can check that you have installed driver TV tuner driver and BIOS versions.
  Maybe a BIOS update will help you.

  But the blue screen of death is usually due to the fault of hardware or software serious dysfunction.

• Not recoverable due to lack of system for the new SOA server

  We are to upgrade a server of Oracle's SOA to use Java 7. When one of our Oracle SOA composite calls a Web Service on the new server, we get the following error. It seems to be a connectivity issue. I worked with our infrastructure team and they had opened the port on the firewall for 8001, HTTP and HTTPS.

  
  

  Not recoverable from system failure : 0 oracle.fabric.common.FabricException: oracle.fabric.common.FabricException: error getting stream input XML:

  filestore / http://192.168.40.84:8001 / FileStoreServicePort? "WSDL: tried them all: '1' address, but not able to connect via HTTP to the server: ' 192.168.40.84 ', port:"8001": error getting stream input XML: filestore / http://192.168.40.84:8001 / FileStoreServicePort? "" WSDL: tried them all: addresses '1', but could not connect via HTTP to the server: ' 192.168.40.84 ', port: 8001 ' tried them all: addresses '1', but could not connect via HTTP to the server: ' 192.168.40.84 ', port: "8001"

  
  

  When I call the old server with the same Web Service, it works fine. The infrastructure team opens the firewall and we always see the same question. Does anyone have any suggestions?

  In the error logs, I see the following exception:

  " java.net.ConnectException: tried them all: '1' address, but not able to connect via HTTP to the server: ' 192.168.40.84 ', port:"8001"at weblogic.net.http.HttpClient.openServer(HttpClient.java:333) at weblogic.net.http.HttpClient.openServer(HttpClient.java:425) at weblogic.net.http.HttpClient.New(HttpClient.java:252) at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:213) at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:398) at weblogic.net.http.SOAPHttpURLConnection.getInputStream(SOAPHttpURLConnection.java:37) at java.net.URL.openStream(URL.java:1010) at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL (MetadataManagerImpl.java:276) at oracle.integration.platform.common.MDSMetadataManagerImpl.getInputStreamFromAbsoluteURL (MDSMetadataManagerImpl.java) :616) to oracle.fabric.common.metadata.MetadataManagerImpl.getDocumentAsInputStream (MetadataManagerImpl.java:159) at oracle.integration.platform.common.MDSMetadataManagerImpl.getDocumentAsInputStream(MDSMetadataManagerImpl.java:478) at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:253) at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:332) at oracle.fabric.composite.model.WsBindingModel.getWSDLDefinition(WsBindingModel.java:30) at oracle.integration.platform.blocks.soap.WebServiceExternalBindingComponent.loadMaterializedWsdlIfNecessary(WebServiceExternalBindingComponent.java:1306) at oracle.integration.platform.blocks.soap.WebServiceExternalBindingComponent.getInvocationMetadata (WebServic

  
  

  Thank you

  Tom

  Post edited by: Tom Henricksen Change presentation

  It was a problem of firewall after all.  I apologize for the confusion and am grateful for the suggestions! Tom

• 5.1 ESXi host rest disconnected when it is connected to the new vCenter Server 6

  Hello

  I created a new version of vCenter Server 6.

  I have e vCenter Server 5.1 connect my 5.1 hosts.

  I want to connect hosts to the new vCenter and then upgrade to ESXi 6 guests.

  I disconnect hosts on the old vCenter.

  The I connect hosts to the new vCenter, and it happens with all the vm´s, etc..

  But it is disconnected.

  And it keeps beeing disconnected even when you try to connect again.

  If anyone has experienced this?

  Thank you

  Thomas

  Have you added these hosts in your new server vCenter along with their licenses?

  Otherwise, if please add host license in your vCenter license inventory and assign to those of your hosts and then try to re - connect.

• Configure the new SYSLOG server but two esxi sends do not log to syslog collector

  Dear team,

  I have configured the new syslog collector and even set up on 16ESXi, host 14 able to send logs to syslog new but towing host is not able to send. How to solve this problem, need your help.

  concerning

  Mr. Vmware

  -
  To resolve the reported problem need to open the port on the firewall syslog on ESXi host...

  Is the open port of ESXi firewall for syslog traffic. Open the Client vSphere, ESXi server, open the Configuration tab, select the firewall security profile and select Properties.

  concerning

  Mr. VMware

• Create the new existing server administrator / Application

  Hello
  
  
  Can someone help me with how to assign rights to a new user who I want to have full administrator rights to an existing Server / Application.
  
  I have configured 11.1.2.2 with security SSP based Essbase.
  
  I tried to affect the level of cluster Administrator and the application of level Application Manager but when I log in PARTY under this user, I do not see the existing server or the existing application, I only get administrator rights to create new ones - is there a way to get around this?
  
  
  
  Thank you
  
  Robert.

  Do not just with the right button on the Essbase servers node, and then add the new Essbase with Single Sign-On Server, and then you will see everything? I think that EAS is always like that, regardless of what rights you got in SS.

• Problem connecting to the new remote server

  We recently spent hosting companies and I am unable to connect to the new server.

  Work in Dreamweaver CS5, Mac OS X

  Here are the steps I took:

  -Under 'sites', went to "manage sites", clicked on the current site and press "Edit".

  -Click on "servers", then + to add a new server. Entered all my info in the "Site settings" window

  -When I click on 'test', I get an error message:

  "an FTP error occurred - cannot establish a connection to the host." No response from the server... »

  Any suggestions? Am I missing a step somewhere?

  Thanks in advance for your help

  Try to go to ftp.yourdomainname.com and see if you by entering your username and password allows through a browser.

  If it isn't, your host has really messed up something.

  Or I guess if the change happened fairly recently, DNS cannot have been activated yet and you could always essentially try to log the old servers.