Push the files in the Simulator

Similar Questions

• Push the connection interrupted by device - using eclipse of the bb Simulator

  Using BlackBerry plugin for Eclipse

  For OS 6

  After taking two weeks to try and correct an error "not close until you have finished" simple with SQLite, I now have a bit of a configuration issue with the Eclipse software.

  When I push a message to the Simulator, I get the following error.

  <2012-04-18 15:39:15.471 EDT>:[378]:::http://172.17.111.35:[email protected]&priority=2&besurl=192.168.1... pushId = -62be8811:136c6f71d73:-7ff576188, destination = [email protected], result code = 400 net.rim.protocol.iplayer.push.b: Push connection aborted by device>
  

  According to the knowledge base, a 400 error is 'invalid Push to the format.

  Mobile data service 3.7 and earlier versions: the email address or the personal identification number (PIN) used in the Push was not recognized as a user of BlackBerry Enterprise Server enabled for Mobile Data Service. »

  I'm sure it's something with the configuration in the rim.property file.  Something probably must be on or off, I can't understand.

  [MonitorAgent]
  MonitorAgent.listen.port=8070
  
  [WebServer]
  WebServer.Tomcat.transcoding= false
  WebServer.listen.host=localhost
  WebServer.listen.port=8080
  WebServer.listen.sslport=8443
  WebServer.servlet.monitor.port=8070
  WebServer.servlet.monitor.host=localhost
  WebServer.servlet.push.port=81
  WebServer.servlet.push.host=localhost
  WebServer.servlet.push.ssl=false
  
  [SRP]
  SRP.UID= please get one
  SRP.AuthenticationString= Please get one
  SRP.InetAddress= Please get one
  SRP.Port=3101
  SRP.logging=true
  
  [IPPP]
  IPPP.push.listen.tcp.port=81
  IPPP.connection.MaxNumberOfKBytesToSend=128
  IPPP.queue.flowcontrol.window.size=-1
  IPPP.queue.flowcontrol.timeout=600000
  IPPP.logging=true
  
  [UDP]
  UDP.receive.port=19781
  UDP.send.default=19780
  UDP.init=initialization_packet
  UDP.logging=true
  
  [HTTP HANDLER]
  application.handler.http.logging = true
  application.handler.http.CookieSupport = true
  application.handler.http.AuthenticationSupport = true
  application.handler.http.AuthenticationTimeout = 3600000
  application.handler.http.device.connection.timeout = 140000
  application.handler.http.server.connection.timeout = 150000
  application.handler.http.device.credentialTimeout = 60000
  application.handler.http.authentication.mechName2oid = Negotiate=1.2.840.113554.1.2.2, NTLM=1.3.6.1.4.1.311.2.2.10, Basic=1.3.6.1.4.1.88888.1.2
  
  [Security]
  net.rim.security.auth.DefaultDomain = rim.net
  
  [HTTPS HANDLER]
  application.handler.https.allowUntrustedServer = false
  application.handler.https.logging = true
  
  [TLS HANDLER]
  application.handler.tls.allowUntrustedServer = false
  application.handler.tls.logging = true
  
  [OCSP HANDLER]
  application.handler.ocsp.StatusProviders = net.rim.protocol.iplayer.connection.handler.device.ocsp.OCSPProvider
  application.handler.StatusProviders.OCSP.PrimaryResponderRank   = Default
  application.handler.StatusProviders.OCSP.Responder.Default      = http://dhobbs-wnt.rim.net/ocsp
  application.handler.StatusProviders.OCSP.UseDeviceResponders    = yes
  application.handler.StatusProviders.OCSP.UseCertResponders      = yes
  application.handler.ocsp.DebugLogging = no
  
  [LDAP HANDLER]
  application.handler.ldap.DEFAULT_SERVER = dhobbs-wnt
  application.handler.ldap.DEFAULT_PORT   = 389
  application.handler.ldap.DEFAULT_QUERY  = ou=people, o=rim.net
  application.handler.ldap.DEFAULT_LIMIT  = 20
  application.handler.ldap.COMPRESSION    = true
  application.handler.ldap.logging        = false
  
  [Database]
  Database.shouldConnect=false
  BESName=DAISY1
  Database.Driver=sun.jdbc.odbc.JdbcOdbcDriver
  Database.URL=jdbc:odbc:BESMgmt
  Database.DBCycleTimer=5
  
  [ACL]
  ACL.Authorization.Datastore=net.rim.shared.service.authorization.JDBCAuthorizationDatastore
  ACL.Enabled=false
  
  [ESS]
  ESS.helpfile    = help/Using_the_Email_Server_Simulator.html
  ESS.launcher    = bin/launcher.exe
  
  [Email]
  Email.deviceId      =2100000A
  Email.pop3Server    =pop3.server
  Email.smtpServer    =smtp.server
  Email.personal      =Dean Logan
  Email.address       [email protected]
  Email.smtpPort      =25
  Email.pop3Port      =110
  

  Any suggestions?

  Figured it out.

  When you set the port of the unit, I had the wrong port

  _notify = (StreamConnectionNotifier) Connector.open (appAttributes.devicePort + appAttributes.deviceSide);

  My company uses a Test port and a port of Prod, so that we can have 2 versions of the application on the device at the same time.  Then, chaning the listening port of 1315 to 1313 authorized service push push to the appropriate port and the app was able to read the data.

• How to create the .cod file to run on the Simulator BB9900

  Hi, I already from the zip package in order to use the bbwp command to create the .cod file and be able to run on the simulator of BB9900, but when I run this command as described in: https://developer.blackberry.com/html5/documentation/compile_ww_app_for_smartphones_1873321_11.html

  It creates two files, each with a .bar file, this type of file, I can't run it on the 9900 Simulator but a .cod file is required to run applications on the sim card.

  I don't know how to create the .cod file.

  Thank you

  Have you used Blackberry Webworks SDK for smartphone or Tablet SDK? The .cod files should be located in the subfolder OTAInstall of your output folder if you are using the Webworks SDK for Smartphone

• Where is the Simulator puts my files?

  I use the 9800 Simulator.  I copied the code from the BOARD documents and he ran. The code is supposed to create a file on the blackberry file system called newfile.txt.  Because I do not use a real device, I expect this file to be created somewhere on my desktop computer instead.  But the search for my entire system.  Where the file is gone and what's his name?

  Here's the code that creates the file. (I left out the stuff to try-catch to simplify the example, but I used it in the test, and no exception is thrown).  I use Windows.

  FileConnection fc = (FileConnection)Connector.open("file:///store/home/user/newfile.txt");

  If no exception is thrown, then the URI is valid, but the file may or may not exist.

  If (! fc.exists ())
  {
  FC. Create(); create the file if it doesn't exist
  }

  OutputStream outStream = fc.openOutputStream ();
  outStream.write ("happy test".getBytes ());
  outStream.close ();
  FC. Close();

  There used to be an article about this, but I'm not.

  Here's a reference on the Internet which may help:

  http://StackOverflow.com/questions/3504053/BlackBerry-Simulator-filesystem-where-is-it

  In any case, I recommend that you change your Simulator to use a directory of your SD card, and then you will be able to see the files.  Look at the menu of simulation (Windows menu above the Simulator, not the Blackberry menu) for more information.

  If you need more please ask.

• Is it possible to access the files shared in the Simulator?

  My Playbook application creates a few files in the shared files folder. When running my app in the Simulator, is it possible to (read) access these files from Windows?

  Thank you

  First, configure the PlayBook Simulator as a target.

  1. Click on the file-> New-> other...
  2. Expand the BlackBerry Tablet OS.
  3. Select BlackBerry Tablet OS target, and then click Next.
  4. Enter the IP address of the Simulator (or use automatic detection).  Leave the password blank and complete the wizard.

  Once you have the PlayBook Simulator configured as target, use the following steps to access the folders.

  1. Click on the window menu.
  2. Choose the command display see her-> from others.
  3. Expand QNX.
  4. Select target file system browser , and then click OK.
  5. In the target file system browser navigated to the folder that contains the file that you want to copy.
  6. Right-click on the file you want to copy, and choose copy to.  You can also drag and drop files to and from this window.

• File in the Simulator connection

  Hi all

  I'm doing the connection files on Simulator and I already tested many articles on how to establish the connection file, but unfortunately no good result.

  1.I created the file by clicking on res folder and add a file 'file '.

  2.i add file by right-clicking on the folder of the file and add the file to the link.

  3.I write the following code

  FileConnection fileConnection is ("myfile") (FileConnection) Connector.open;.

  Here, if I write something like "file:///store/...". "without exception occur but false return fileConnection.exists ().

  Can someone help me open connect using the Simulator or just how to play this file?

  Hello

  I think that you must use FileConnector to read the file in your workspace. Just use Class.getResource for InputStream. I hope this will help.

              InputStream input = this.getClass().getResourceAsStream("\myfile.txt");
  
              ByteArrayOutputStream baos = new ByteArrayOutputStream();
              int j;
              while ((j = input.read()) != -1) {
                  baos.write(j);
              }
              input.close();
  
              byte[] data = baos.toByteArray();
  

• Can't push to the physical device but can push to the Simulator

  Anyone know why I can't push my real BlackBerry but I can push to the Simulator?  I'm just accessing this site on my test pc and pointing to our production server BES.

  http://BES_Server:17080 / push? DESTINATION = MyPin & PORT = 7874 & REQUESTURI = localhost

  I can't transfer blue in the upper right arrows on my device when I send the push. but my application it never receives.  What I put in REQUESTURI how?  If so, what it should be and where I put it in my application?  When I use the MDS assessment locally with the Simulator server, it works fine and sends push them to my fine application of the suggestions would be great!

  I had the reliable port wrong number.  It doesn't seem to matter what I put that in the Simulator, but in the real device it Mater.

• Cod files does not not in the Simulator!

  First of all, I must say that development of BlackBerry is probably the most frustrating form of development that I met.

  I can't get my HelloWorld application to run on the Simulator.

  I have successfully built the cod file using eclipse and one build.xml.

  I copied all the output files (including cod file) in the Simulator installation directory manually.  It did not work.

  So I tried to load the java program directly using the Simulator via file > load Java program...

  None of these methods work.  There is no icon in the downloads folder.  My request is not listed in the list of the Application Simulator, BUT he is listed in the list of the Module.

  operating system: Vista

  JDE version: 4.6.0

  IDE: eclipse

  It's maybe a stupid question, but still: your application has an enty point?

• Push BIS to the Simulator

  I see no way to test on the Simulator push notifications. I see a discussion on the MDS Simulator but nothing on BIS.  Is there a method that I missed?

  Thank you

  BIS is not supported by the BlackBerry smartphone simulators.  You will need to test with a real Smartphone BlackBerry.

• Programming file record in the Simulator.

  Hello

  I saved the file in file:///store/user/documents programmatically and I can navigate and see by the Simulator File Explorer. Question:

  Where is the physical location of this file on my PC and how can I find it and open the other program. In example XMLDEMO of JDE 4.7.0 the file that is being read is sitting in the local directory C:\Program Research In Motion\BlackBerry JDE 4.7.0\samples\com\rim\samples\device\xmldemo\xml. I need to do the same. I need to save the file in the directory where my application is sitting.

  Thank you.

  The file that you created will be to the .dmp format in folder Simulator. You can use PC as a microsd card storage to test the object.

  See this Article.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800792/801083/How_To _...

  The xml demo app that you talked, you must place the file before using it. You cannot create a file inside the application.

• Unable to load the file on Tablet Simulator bar

  Hello

  I have the latest JDK and JRE and the simulator of tablet running on the VM player. The development mode is on and I have the IP address. I managed to compile the example sketch program, and it generated a file bar. But when I get home

  BlackBerry-deploy - password xx - installApp-device 192.168.52.128 - package bin\sketchPadStandard.bar

  It says install...

  then,

  result::faliure.

  don't give all the details. Any ideas as to why this is happening?

  Hello

  It was with the release of Simulator.downloaded the new version (beta 2), and it worked.

  Oh and another thing, I tried to create a virtual machine with a 2 GB hard drive and it wouldn't boot (the old version did somehow). When I increased the size of the HD fine tho.

• Win 7 network users cannot push the desktop files

  Hi - I have W7HPx64 on the table, and descendants both have Jason with W7HPx64.  Marcot on WLAN, the office is on ethernet.  I've set up a "home network", but establishing a "homegroup" appeared to leave me with a lot of side effects, so I went to the old-school working group I had on W2K Pro who never gave us difficulties.

  The problem is that after having shared folders on the desktop and on the Marcot, we can push/pull files to/from the Marcot, but the Manon can't push the files to the desktop.  They can specify good files.

  At the moment that I simply do not understand the configuration of permissions very complicated W7 inherited from XP.  I can not even find a 'group' for the hosts on the local network: to get any form of communication, everyone had to be set up as a 'user' so that we can log on to remote computers.  I'm also confused by a difference between 'share with... '. "in the context menu for folders and files (which is currently attached to"nobody"(I think) and properties > sharing.)

  Logon is not a problem.  Only by pushing the files on the desktop.  Please, can someone direct me to a place where W7 permissions/security/sharing is explained in words of one syllable or less?

  Gordon.

  Hi Gordon,.

  I'm sorry to hear that you are facing issue to push the files to the users of the network. We defer the steps described in the following Microsoft help articles. I'm sure this will help you to solve the problem.

  Networking of computers running different versions of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Learn about the home network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows/explore/get-to-know-home-networking

  Please do not hesitate to answer if the problem persists, so that we can better help you.

• Did not push the file control point (no space available on the device)

  Hello

  I use Proliat HP DL 380 G5.  8 GB (RAM) 61 GB of space

  (RAID0 + 1) second HARD drive has failed while working on a HARD drive at the moment...

  After 20-25 minutes, I can't ping my VM OS which is Windows 7 (active)... and events, I see this error...
  Did not push the file checkpoint at 05:00 (no space available on the device).

  Details of the event:
  	Type: error Description: Error message on WINDOWS-PRTG on localhost.localdomain ha-Datacenter: impossible to reach 5.3 GB of file control point: no space is available on the device. Time: 09/12/2015-10:05:31
  Error stack:
  	Did not push the file checkpoint at 05:00 (no space available on the device). Failed to prepare the file ' / vmfs/volumes/56653def-ccd90fc3-0a42-001b783701ae/WINDOWS-PRTG/./WINDOWS-PRTG-f1e094f5.vmem ': 28 (no space available on the device). An error occurred during registration: 28 (no space available on the device). Impossible to suspend the virtual machine: msg.suspend.error.SUSPEND_E_NOSPACE.
  Additional event details:
  	Type ID: error Build host: 3029758 Target object Type: ComputeResource Type of data center: data center The host object type: HostSystem VirtualMachine object type: VirtualMachine ChainId: 201

  Could you help me solve this problem?

  Thanks in advance

  * Note * I found the solution... Before I used the system of virtualization and Citrix (XENSERVER) there was little different. That's why I'm stuck on a few easy steps... Well, the problem was that I use 61GB HDD, 5.5 GB of memory. When I create the VM I "ve used the maximum size of HARD drive and left no space for the SWAP file. I used 58 GB, and you have to assume + memory size, this means, 58 GB + 5.5 GB...   So who is right for which I didn't have enough space. Hopefully someone will find it useful. See you soon,.

• My App works on the Simulator, but not on a handheld

  Using the JDE 4.5 with 4.1.2 MDS Simulator

  Eclipse with JDE

  ---

  My app works fine on the simulator using MDS.

  The application simply pushes a screen and then creates a thread (an object of type LoadScreenThread) that will take an XML file using HTTP.  The XML file is parsed and then creates a new screen and it grows by calling (from LoadScreenThread): invokeLater with an executable object what method run() calls anti-pop and the specified UiApplication pushScreen.

  I tried various things for the last 10 hours and it still does not work.

  For the HTTP connection, because I would use MDS to Internet I added the '; '. deviceside = false' suffix.

  Could someone tell me please know why it would work fine on the Simulator (MDS) and not on a portable device?

  On the handheld, I see the arrows download flicker.  But it drives not only the new screen?

  Your device is connected to a MDS (BlackBerry Enterprise Server)?

  If it's just your BB private, so it's rather unlikely, and you will very probably connected to BIS. But you have to grant special permissions to RIM using BIS to use other means like the WAP2 gateway.

  Take a look at this thread:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=29103

  It explains basically everything on the sides of the network connectivity to BlackBerry.

• Control the simulation time to align the time system

  Good so maybe it's blindingly obvious or just simply a ridiculous question but here goes:

  I run a dll that I produced from a .mdl file. My goal (among others!) is to get the dynamic response of the exact model of 'real world' calendar (date system). The tuning for the appearance of the control of this model is based on the duration of simulation with produced in simulink and so it is desirable for me to define the duration of the simulation to run when the system.

  The problem I have, if you open the workspace and produce a template control, the simulation shown time is much faster than the time system.

  For example, one iteration of the model takes a fraction of a second. What I imagine happens, it is immediately restart (and progress of a time step). I guess I want the model to wait until it is in harmony with the system time before iterate again.

  Is there a way to solve this problem, and do anyone know if this problem will be resolved in Simulink or Veristand 2009.

  Any information would be appeciated, my trawl of the help files OR have not really answered the questions yet good

  Thank you
  James

  The models are running in sync with the rest of the system. Unless you specify a decimation factor for your different model of 1 for each tick of the primary control loop your model put once, too. The difference between the model and system duration that you see is due to the fact that the model time is based on its time not Delta T compiled, not any of the wall clock time. Every time that the model is Ticktock, it adds its own Delta T to its operation time string.

  The time channel system is based on the Delta T of the primary control loop. Thus, it corresponds with the rate you specified the system to run at. If these Delta Ts are the same, are aligned at the same time. If you want the time to model to match an actual wall clock time, you can adjust the flow of the loop of the primary control loop to match the Delta T, or adjust the factor of the decimation of the model so that it gets only checked once for every N the primary control loop iterations.