Push BIS to the Simulator

Similar Questions

• Can't push to the physical device but can push to the Simulator

  Anyone know why I can't push my real BlackBerry but I can push to the Simulator?  I'm just accessing this site on my test pc and pointing to our production server BES.

  http://BES_Server:17080 / push? DESTINATION = MyPin & PORT = 7874 & REQUESTURI = localhost

  I can't transfer blue in the upper right arrows on my device when I send the push. but my application it never receives.  What I put in REQUESTURI how?  If so, what it should be and where I put it in my application?  When I use the MDS assessment locally with the Simulator server, it works fine and sends push them to my fine application of the suggestions would be great!

  I had the reliable port wrong number.  It doesn't seem to matter what I put that in the Simulator, but in the real device it Mater.

• Push the files in the Simulator

  Hello

  I would choose a file specifically images and view it in the imageview.

  But now I am unable to crack how to send pictures on the Simulator.

  My camera does not respond within the Simulator as well.

  Please let me know the possible solutions.

  Thanks in advance.

  Kind regards

  SHA.

  Hello!
  Have you tried Target File System Navigator in Momentics?

• My App works on the Simulator, but not on a handheld

  Using the JDE 4.5 with 4.1.2 MDS Simulator

  Eclipse with JDE

  ---

  My app works fine on the simulator using MDS.

  The application simply pushes a screen and then creates a thread (an object of type LoadScreenThread) that will take an XML file using HTTP.  The XML file is parsed and then creates a new screen and it grows by calling (from LoadScreenThread): invokeLater with an executable object what method run() calls anti-pop and the specified UiApplication pushScreen.

  I tried various things for the last 10 hours and it still does not work.

  For the HTTP connection, because I would use MDS to Internet I added the '; '. deviceside = false' suffix.

  Could someone tell me please know why it would work fine on the Simulator (MDS) and not on a portable device?

  On the handheld, I see the arrows download flicker.  But it drives not only the new screen?

  Your device is connected to a MDS (BlackBerry Enterprise Server)?

  If it's just your BB private, so it's rather unlikely, and you will very probably connected to BIS. But you have to grant special permissions to RIM using BIS to use other means like the WAP2 gateway.

  Take a look at this thread:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=29103

  It explains basically everything on the sides of the network connectivity to BlackBerry.

• Notifications push on BB 10 Simulator

  Hello

  I want to send notifications push for BlackBerry 10 Simulator.

  What should I install?

  With 7 BB Simulator, I had 6 MDS, which delivered the push notifications.

  Thank you

  Nick

  Hi Nick,

  The BlackBerry 10 Simulator doesn't support Push today.

• Private opens in the Simulator, but not on the device

  Hello world

  I have a BlackBerry Tour 9630 (4.7.1.61). I'm running the 4.7.0 Simulator in Eclipse.

  Does anyone know why my application would open up a private in the Simulator without problem, but the browser does not open on my real device? I get no error on the device, it just goes to the next screen. I confirmed that the internet works on the device, and I don't see why use only the type of browser BIS would be a problem (I also tried BES).

  Here is my code:

  UiApplication.getUiApplication().invokeLater(new Runnable() {
      public void run() {
  
      BrowserSession session = BrowserLocator
          .createBrowserSession(BrowserLocator.BROWSER_TYPE_BIS);
              if (session != null) {
                  session.displayPage(loginUrl);
              }
  
      AuthorizeScreen authorizeScreen = new AuthorizeScreen();
      UiApplication.getUiApplication().pushScreen(authorizeScreen);
      UiApplication.getUiApplication().popScreen(OAuthScreen.this);
      }
  });
  

  Thank you!

  Thanks for your help.

  The session was to return null. I was able to reproduce this behavior in the simulator using a different type of browser not supported by the service books. Finally, I removed my own BrowserLocator() class (for the call of a certain browser) and replaced by the BrowserSessionFactory() provided in the JDE samples. I now have the browser on the opening device.

  What is the safest Bet, to use the default browser of the device, or use a browser BIS?

  Thank you!

• My iPhone 7 won't let me push down on the icons to move them. No matter how hard or how long I push the icon itself just happens.

  MY iPhone 7 won't let me push down on the icons to move them. When I push it down and that you hold, no matter how many seconds the icon itself appears just. Help!

  Push slightly, not difficult.

• App-Manager does not connect to the Simulator OS Firefox on Windows 7

  OS: Windows 7

  Firefox: 28

  6.0pre8.20140112 Simulator 1.2 Firefox OS

  When I run the simulator it opens fine and I see a Firefox OS Desktop
  But the App Manager does not connect. The console at the bottom right says:

  .. localhost:56455 options (the port varies)

  .. connection timeout. Possible causes: has not clicked 'accept' (guest).

  .. .disconnecting

  .. .disconnected

  I have disabled my firewall, restarted firefox and even system - did not help
  There is a similar bug - but I don't know if we are talking about the same thing:
  https://support.Mozilla.org/en-us/questions/988385

  Thank you

  Well - I already knew these links and I can't find anything useful
  Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
  This one works very well

• Default device in the Simulator

  Hi guys

  Is it possible to set the default device Simulator? I always want to turn into one of those more peripheral NOT. All except 6 + and 6 s +.
  It is annoying when it does not fit in my MBP 15 ".

  Thank you

  You can try to reset the Simulator, but I think it's just the default value for the last type of device used.

• Control the simulation time to align the time system

  Good so maybe it's blindingly obvious or just simply a ridiculous question but here goes:

  I run a dll that I produced from a .mdl file. My goal (among others!) is to get the dynamic response of the exact model of 'real world' calendar (date system). The tuning for the appearance of the control of this model is based on the duration of simulation with produced in simulink and so it is desirable for me to define the duration of the simulation to run when the system.

  The problem I have, if you open the workspace and produce a template control, the simulation shown time is much faster than the time system.

  For example, one iteration of the model takes a fraction of a second. What I imagine happens, it is immediately restart (and progress of a time step). I guess I want the model to wait until it is in harmony with the system time before iterate again.

  Is there a way to solve this problem, and do anyone know if this problem will be resolved in Simulink or Veristand 2009.

  Any information would be appeciated, my trawl of the help files OR have not really answered the questions yet good

  Thank you
  James

  The models are running in sync with the rest of the system. Unless you specify a decimation factor for your different model of 1 for each tick of the primary control loop your model put once, too. The difference between the model and system duration that you see is due to the fact that the model time is based on its time not Delta T compiled, not any of the wall clock time. Every time that the model is Ticktock, it adds its own Delta T to its operation time string.

  The time channel system is based on the Delta T of the primary control loop. Thus, it corresponds with the rate you specified the system to run at. If these Delta Ts are the same, are aligned at the same time. If you want the time to model to match an actual wall clock time, you can adjust the flow of the loop of the primary control loop to match the Delta T, or adjust the factor of the decimation of the model so that it gets only checked once for every N the primary control loop iterations.

• How to set the simulated on material values simulated?

  I simulate the material using the Software NI MAX.
  I would like to access the material simulated using the interface in ANSI C.
  But I want to get the values.

  How it is possible to adjust the simulated values?

  You can not. The only value of simulation is the wave sinusoidal, as explained in the help.

• The simulated signal RMS

  
  

  Dear Susan!

  I took a glance on your application.

  It's really good, but the calculation of the effective measures should not be implemented in the Simulation of control loop, since the calculation will be dune for each point this may require Ness on the graphical indicator, when you run the code.

  I made a few changes and used Uilities int Simulation palette palette function of collector . This function allows to collect data and do the treatment on it, the end of the simulation.

  Please find attached code.

  If you have any questions, feel free to ask.

  BR,

• Multisim 12 - by clicking on the button "stop the simulation", does not seem to turn off the circuit

  Greetings.

  I recently installed 12 Multisim and have not changed the basic operational parameters, I know...

  Shortly after installation, the application is an update.

  Your help is apprecaited to understand what is happening...

  Steps to recreate:

  1. start multisim.

  2. open a very basic circuit that includes a battery 10V with the ground, a lamp, a voltmeter between the lamp and an ammeter in series.

  3. use 'switch' at the top right of the appliation multisim window to run the simulation.

  4 lamp shows a 'enlightenment' and voltmeter indicates 10V and ammeter indicates .1a circuit.

  5. use the switch to stop the simulation.

  6. no change in the circuit or lighting of the lamp measures.

  7. same results if the simulation starts the arrow and the red square are used to start and stop.

  If I close it and reopen it circuit, the circuit begins in the OFF state, but will not OFF If when you select stop simulation.

  This is the case with several circuits, those provided by the College and the other that I created based on the same design.

  Multisim restarting has no effect to correct this observation.

  It doesn't seem normal that when the simulation running, values or apparent lamp lighting does not change.  The simulation doesn't have to go back to the start state (OFF) when I stop the simulation?

  I captured the homerun status after stopping the simulation.

  Thanks in advance for your help.

  Zan

  Hi zanzarista,

  Multisim retains the values for everything in the circuit when the simulation is stopped. Which means that you are able to view the values on your instruments (such as multimeters) even after the termination of the simulation. When you start a simulation once again, starts all over again and that's why you see a 0 momentarily.

  It is the way in which the software is intended to work.

  I hope this works.

• I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers

  I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
  Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.

  Hello Lascarica,

  I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.

• Is there a button to push that initiates the screen saver without delay to launch?

  Is there a button to push that initiates the screen saver without delay to launch? I want to apply the screasaver with out having to wait the time it takes so that it starts on its own. Looking to see if there is a way to do this?

  Is there a button to push that initiates the screen saver without delay to launch? I want to apply the screasaver with out having to wait the time it takes so that it starts on its own. Looking to see if there is a way to do this?

  see if you can use this tutorial...
  To create an icon to launch the screensaver.

  http://www.howtogeek.com/HOWTO/Windows-Vista/create-icons-to-start-the-screensaver-on-Windows-Vista/

  PS adding...

  An easy way, scroll down for:

  Download of shortcut icons (Vista only). The author has created a "ready-made shortcuts.

  I have not tried. I can't guarantee it.* *.