Put e-mail in place problems

Similar Questions

• BlackBerry® Smartphones put E-mail in place the 8520 problem

  I can't send emails... maybe I has not properly implemented the enamel, cause the implementation of Wizard only displays bb enterprise server as an e-mail put in place option. need help

  problem of sorting... thnx!

• BlackBerry® Smartphones put E-mail in place the problem

  I have a Curve 8520.  Currently, it is configured to receive e-mail messages from a Hotmail account and a gmail work account and these work very well.

  Got rid of my Hotmail account and have opened a personal gmail account, so I migrated my Hotmail mail on Gmail.

  However, when I went to set up my new personal gmail on my BB account, I get the following error:

  "Your device has encountered a problem with the application server.

  I tried to restart.  Then, I turned off the unit and removed the battery and the sim.  I then tried to remove the battery and sim with the appliance.  None of this has worked.

  It's so frustrating!  Any ideas?

  You can access your e-mail BIS established accout from your PC too.

  http://www.BlackBerryFAQ.com/index.php/Where_can_I_log_into_my_BIS_account%3F

• Put e-mail in place issues.

  I want pictures by email, but after an Adobe technician remotely tinkered with my settings I can't send anything at all now! I understand that Gmail is not tied with Lightroom 6 for the moment, so a previous tech from Adobe installed my account hotmail on the settings that worked well. I am now in a situation where I don't know what to put the fields required to activate again my e-mail address. Can anyone help please? Thank you.

  Hello!

  Google is one of the default messaging services in Lightroom, so you'll need are your ID and password to put in place.

  

  Click on the Add button in the e-mail Accounts Manager, enter a name that you want to use in Lightroom and choose Gmail as a supplier. Click OK.

  

  In the next outgoing server details screen are already filled in. Fill in your credentials, and then click Validate. If the light turns green then you are ready to send the email from this address.

• BlackBerry® Smartphones put E-mail in place

  I'm trying to set up email on my phone accounts.  I can go as far as the additional settings page where you enter the user name and the e-mail server.  After completing what I click Next, but rather if an icon of finishing the software goes back to the page to add a new account.  If I then click on set up a new email account screen is empty apart from the word "login" at the top of page.

  I managed to set up an email address, but there is no need of additional parameters.

  Advice please.

  Phone is curve 8900.

  On a related note, is there way to temporarily suspend the email on the phone with out actually delete the account.

  Thank you.

  GOM

  I have now resolved the issue.  This was due in part by using incorrect credentials for my email accounts!  Also, I found that the removal of the battery and replacement of soft reset which seems to solve the problem of not being able to access the correct page set up accounts.

  Thank you for your advice.

  GOM

• BlackBerry® Smartphones put E-mail in place do not! HELP PLZ!

  Hello

  I went from Curve 8520 to torch.

  do you have a device Exchange but e-mail has not then I ignored and thought it might just set it manually. (if I went to wipe the curve!)

  so I'll put up and it automatically detects my email addy and forced me to 'move' the e-mail account to the new device, so I click on 'move', valid my e-mail with password etc and said it's over.

  but when I try to compose an email it says that I don't have an e-mail account set up. or if I try to sync from the email account set up screen it says "transmission of activation has failed."

  I try to remove what it does successfully, then he reappears just in my email accounts management! ?

  any ideas? would be well appreciated. feel free to PIN me or BBM me with ideas.

  thanking in advance.

  James Hottinger

  26D8CAF4

  Hello

  It is a facility of BIS.

  think I just fixed it well. I found an option by chance to send service books then I went through the same process and hey presto, that it activated successfully.

  One to remember for next time!

  see you soon,

  James

• Put e-mail in place

  Need help end ding how to configure my email, can I still use Yahoo or do I use my server Suddenlink and having to call them to find out what is my user name and POP3?

  To set up Windows Mail with Yahoo, you need a PAY of Yahoo Mail version: Yahoo! Mail PLUS!

  http://www.SuddenLink.com/

  If Suddenlink is your service provider, they will help you with your e-mail settings...

  http://mysuddenlinkbusiness.com/PDF/faq_emailsetupvista.PDF

  Above is a guide for the implementation of Suddenlink.
  

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• Put e-mail in place with go-daddy

  My site is hosted through BC, but I bought the domain and email through go daddy plan. Go Daddy wants me to verify that I own the domain by adding a txt with the name record @ and the value txt, MS = ms *. (* under the direction of life private). Do you know where I can edit this in British Colombia?

  You can add this via the console of your site administration > Site Settings > Site areas > more Actions > new advanced DNS records. Select 'TXT' in the menu drop down and you can add the recording here.

• Tecra A9 won't boot up until I'm not going to put pressure on certain place

  I have a problem with my PC toshiba laptop tecra a9.
  It does not start normally when I press the power upward button, but in some cases, when I set the pressure at the bottom of the laptop (somewhere in the middle between the RAM and the CPU modules). [I'm pressing here somewhere, but both CPU and motherboard seems to be OK | http://i44.tinypic.com/1zzs0tg.jpg]

  I disassembled the laptop several times, but I couldn't find anything about the cause, and I couldn't find the exact spot, because I didn't want to start while he was not assembled back.
  When I turn on my laptop, the screen remains black, but HARD DRIVE control custom light normally and the CPU fan crazy at maximum speed until I turn the laptop off ("beep coming, but it's a pretty strange as sound, beep dying")
  (don't know how to describe it, it's like I would have cut the power of the signal sound emitor and level wither away within 2 seconds).

  However, if I do not put pressure at this place and it presents itself, it starts perfectly and resist not stable I turn it off. I can also suspend-to-ram, but if I close the lid, im unable to exert pressure on this spot when I open the lid.
  So I can't suspend, close the lid, and then recover.

  I think that this could be solved somehow avoid something in post-test or maybe theres a sensor (idk). I heard on the internet that it could be linked to the power supply inside the laptop which is not very well connected
  [My symptoms are very similar as in this case | http://www.laptoprepair101.com/laptop/2006/01/02/toshiba-tecra-te2100-boot-problem/comment-page-20/]

  Oh I forgot, I have this problem since the time when my daughter down my laptop on the ground of couch - like fall of 40cm (this is why I believe that some might contact had been damaged or something).
  Thanks for any response or assistance.

  Hello

  > Oh I forgot, I have this problem since the time when my daughter down my laptop on the ground of couch - like fall of 40cm (this is why I believe that some might contact had been damaged or something).

  It is difficult to tell what's exactly or what part is exactly.

  I don't see any details that could be wrong on the picture

  But the region on the motherboard that you have marked showing the CPU.

  Maybe the CPU is not correctly connected to the plug. This could be due to the decline.

  Perhaps it would be useful to remove the cooling module and CPU and check it again

• I have a question regarding windows mail. I was send and receive mail with no problems until last Thursday. I can still receive mail, but I can not send.

  / * moved from answers Feedback * /.
   
  I have a question regarding windows mail. I was send and receive mail with no problems until last Thursday. I can still receive mail, but I can not send. My email is with bellsouth.net and comes in my computer through windows Messaging.  I spent an hour and a half on the phone with bellsouth, and they say that the problem is with my windows mail.  I tried to use a restore date, and that did not help either. I will post a copy of this message, as I keep getting.  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Object 't', counts: 'mail.bellsouth.net', server: 'mail.bellsouth.net', Protocol: SMTP, Port: 25, secure (SSL): no, error number: 0x800CCC0F thanks for any help.

  Sometimes, WinMail settings get screwed up and you must remove the account and then add it back back.  Make sure first that the antivirus software not interfere (see www.oehelp.com/OETips.aspx#3).   Delete your account completely, then close WinMail.  Then compact and repair the database of WinMail (see www.oehelp.com/WMUtil/).  Add your account to mail back once again, and then make sure you have the correct settings under Tools | Accounts | Mail | Properties | Servers and | Advanced to what AT & T Specifies to WinMail (or OE).  Then see if it works.

  Steve

• can you put your mail icon in the dock on your top menu bar?

  can you put your mail icon in the dock on your top menu bar?

  N °

• I want to put Yahoo Mail icon on my desktop as a shortcut, I snipped it now how I put on desktop as a shortcut?

  I want to put Yahoo Mail icon on my desktop as a shortcut, I snipped it now how I put on desktop as a shortcut? Thank you for any help you can provide.

  Hello

   
  What web browser do you use?
   
  Method 1:
  Follow the steps mentioned below.
   
  1. Right click on a space empty on your desktop.
  2. New select shortcut.
  3. The shortcut Wizard window appears.
  4. Type: http://mail.yahoo.com/
  5. Press ENTER.
  A shortcut to Yahoo Mail icon will be added to your desktop
  
  Method 2:
  You can also try this method to create an icon on the desktop for Yahoo mail.
   
  1. Open Internet Explorer.
  2. Open Yahoo mail in the page.
  3. Click on the file menu.
  4. Rest the cursor on the Send option, choose the shortcut on the desktop.

• 6835 HP printer all in one: HP 6835 put in place problems

  I have trouble getting my new 6835 HP to work with our windows 8.1 machine.  Set up the printer by installing disc and at the end (after that the printer is supposed to be set up), she wants to send me to a web address that gives me just an error message on the computer screen.

  The printer appears on my printers Control Panel menu but it tells me that "driver is not available.  I get an error message when I try to print from this computer.

  Ironically, with no software in place, our comfortable Macs until the wireless printer and can print.  And mobile devices to print as well.  It's just the windows laptop 8.1 where the printer has been installed in the wireless home network that has the problem.

  I tried to download the drivers and software HP and re - install instead of using the drive... with exactly the same result (sent to a web address that gives an error).

  Any help would be appreciated.

  Hi @mitchjj,

  Welcome to the HP Forums!

  I see that you have trouble to install your HP Officejet 6835 on Windows 8.1. I'm happy to help with this installation problem!

  I recommend the following solutions:

  1. Uninstall the software. Uninstalling the printer software.
  2. Clean boot the computer. How to perform a boot in Windows.
  3. Disable all antivirus programs. How to disable the Antivirus in Windows 8?
  4. Disable all firewall programs. Disable the firewall on the computer desktop of Windows or Windows 8 8.1.
  5. Reinstall using the printer HP install wizard for Windows.

  I hope this solves your problem and I thank you for posting!

• Outlook Express put in place problems with AT & T U-verse

  I have IE8 and use Outlook Express.  Try to configure Outlook Express as my Mail Server in AT & T 'U-verse Pro' internet service.  The settings provided by U-verse in Outlook Express accounts and Options do not work (I'm guessing that some of the problem lies in our ports specified by AT & T for the sending and receiving).  Tried all kinds of variations of the parameters proposed in several forums.  I can only receive email, but not send with the current settings; find settings to send e-mail but then could not receive.  AT & T printed literature, personal sales and the 1st layer Support using Outlook Express say is possible, even if the company is recommended to use their Web mail.  I'm about to give up, so please help with a solution.

  I notice that when I use the Internet Connection Wizard in Outlook Express, the fields specifying that the I.D. of mail server incoming (POP3) is found in the column where I expect to find an account name in the e-mails received.  Current settings, my list of downloaded emails shows "inbound.att.net" in the column account where I expect to see "Paul Mail".

  FYI: Internet Explorer has nothing to do with access to accounts via Outlook Express POP3.
   
  Setting up email in Outlook Express servers
  http://www.Microsoft.com/Windows/IE/community/columns/mailserver.mspx 
   
  Implementation AT & T U-verse in Outlook Express
   
  http://www.ehow.com/how_6075140_configure-Outlook-Express-at_amp_t-UVerse.html
   
  http://outlookexpresshelp.com/tag/att-UVerse/
   
   

• E-mail put block filter in place correctly, but does not work

  Following the instructions of 'Block sender' I've set up this filter. I can add e-mail addresses in the filter, but when I click "Run now" nothing happens. I created this filter in a different e-mail account and it works properly. Why it won't work in this email account?

  As Matt says, it is better to train the filter spam via Junk Controls for dealing with all general waste. All the info to the address provided by Matt.

  In addition:
  I notice that you use the 'subject' 'contains' '' email '.
  The topic usually contains the email address?
  The 'FROM' 'Contains' 'e-mail address' would be perhaps more accurate.