Tecra A9 won't boot up until I'm not going to put pressure on certain place

Similar Questions

• Tecra M5 won't boot to the top with 4 GB of RAM

  Hi all

  I'm new on this and have a problem. I read that the Tecra M5 laptop can support 4 GB of RAM. I did a scan on crucial.com and which confirms what I had read, so I bought 2x2gb DDR2 PC2-5300 modules DIMM. I tried an and he worked with 1 GB in second slot manufacturing place a total of 3 GB and works fine, but when I swap the 1 GB for the other 2 GB and turn on the laptop, the screen stays white and I all boot can hear but nothing appears on the screen. My brother has exactly the same laptop with the same specifications and its 4 GB works fine.

  Anyone can help the Please this problem?

  Thank you very much

  Sunnynagra

  Hello

  To me it sounds like that both modules are not compatible set. The modules you purchased exactly?

  Have you tested both modules only?

  From my own experience I can recommend Kingston modules. Never had a problem with these modules.

• Tecra 9100 won't boot to the top

  Hello

  My Tecra 9100 will not start at all. Battery and disc hard drives light up but the machine does not illuminate and etc. cpu fan does not turn. I don't know if anything burned on the main panel, etc. that would stop it boot in the bios.

  For any help or suggestion would be appreciated.

  Thanks in advance.

  Hello Steve

  Sorry, but if there is any sort of reaction and if you are not able to enter the BIOS settings which suggest serious hardware problem. On this path, it is not possible to say what the problem is. Unfortunately I put t see any solution it and I guess the unit must be sent to the service partner.

• Tecra A10 won't boot windows 7

  Dear forum
  I used Easeus todo backup to backup my OS.
  Later I stupidly formatted the hard drive probably clear in the important boot partition/sector that may have existed.

  After that I "restored" the windows image file on my laptop 7

  Unfortunately, it does not start

  When I start the laptop I get the message "insert system disk... then press a key."

  Nobody knows is anyway I can now do my windows 7 bootable again please
  Ian

  Try to start the Windows 7 disc.
  Then you should be able to start the Repair Console.
  In the console, you can use the commands * FixMbr * and * FixBoot * to repair the master boot record.
  In case this is not enough, I think you would need to reinstall the system again

• Tecra A10 won't boot to the top

  My laptop does not start at the top.
  When I plug in the power supply of the Green LED on the front of the palm rest (on the far left LED) flashes slowly.
  No other led is on at all. By pressing the power on button doesn't produce no effect.

  Please can someone tell what might be the problem with this laptop.

  "Maybe someone knows if the special 'sequence' of the flashing is listed as meaning any lease of particular problem."

  Your kind help in this matter would be appreciated.

  Thank you
  Ian

  Hello
  There must certainly be a hardware malfunction.

  > "Maybe someone knows if the special 'sequence' of the flashing is listed as meaning any lease of particular problem."

  Knowing that you can read the flashing code by using the following procedure:

  Short blinking means 0 and long, 1.
  The code can be something like 0001 0001

  Error code begins with LSB (least significant bit), the error code should therefore be read starting with the last piece. This means that the code: 0001 0001 appears as 1000 1000
  This code you need to turn it into HEX and you will get the error code.

  But in my opinion, even if you want to know what is causing this problem, especially it s any malfunction of the motherboard (maybe also part connected to the motherboard as a RAM module) and it means that the integer part must be replaced.

• Won't boot Equium A200 - checksum does not match

  Hi all

  When I boot from the HARD disk, I get the message the file is possibly corrupt.
  The file header checksum does not match the checksum calculated.

  If I use the resettlement drive, the same problem.

  Any help, greatly appreciated.

  Hello

  Check the HARD drive please!

  Maybe HARD drive failure that I recommend the use of the tool called Drive Fitness Test.
  It s freeware and you can download this from several different pages
  The tool creates a bootable CD that you can use to run diagnostics tests!

  Welcome them

• Tecra A6 won't start

  I have a Tecra A6 that won't boot to the top.
  Last week I left it for about 2 hours, it went into hibernation, and since then I could not start.
  When I press the Start button, what ON LED is green, then the HARD Drive LED flashes once and that's all that happens. The screen remains black, the DVD drive opens, nothing.
  The strange thing is that the computer is turned on (the Green is lit), the fan starts once a while and the underside of the case becomes hot.

  For me, it seems he has stuck in hibernation mode and can not enter a true boot procedure.

  Any suggestions would be welcome.
  Thanks in advance.

  According to your description is solid as the laptop would begins and the CPU would work because the underside gets warm. BUT there is a problem with the display.

  You can try removing the battery for an extended period and disconnect the adapter.
  Then after this procedure and several waiting time you connect the AC adapter and try to start Notepad.

  Please report if it works

• 320 external USB HARD drive won't boot

  Hello!
  After working fine for 5 months, my disk 320 external HARD USB is now showing that it is not initialized. When I go to disk management and click to initialize it, it won't boot. Can someone tell me how to make this work? I'm sure I'll have to format too, but can't find any way to make that without initializing the HARD drive first.
  Any help would be appreciated.

  Hello

  Try removing the USB ports in Device Manager. After restarting again the USB ports should be recognised again.
  Then again connecting the external HARD drive.

  The second possibility is to use an external USB hub with an additional power supply.
  It is possible that the HARD drive needs more energy than the 500mA

• Satellite Pro C850 - 14 d won't boot to the top

  My laptop won't turn. I had the toolbar Sweet Packs to come and I'm never round down to remove. Then last week, it was not plugged and ran out of battery. When I plugged it would not start. I'm completely at a loss.

  I pressed F8 and tried to turn it on in safe mode, restore, back to the last good configuration, repair, etc., and none of them work. It still just goes back to trying to start and default. It requires the Windows 7 boot disk, but we do not have.

  I'm not particularly computer literate and I am now panicking a bit. Has anyone advice please.

  Thanks in advance...

  Please be so kind and tell us first what model of laptop you have.

• Satellite M40 won't boot bootable CD or DVD

  My Satellite CD or bootable DVD won't boot.
  I started before but now it won't.
  I tried taking into C, change the settings of the bios and F12.

  When I C it's a wit black screen a '_' who will blink for a few seconds, drive begins to spin but then windows starts.

  Any help would be welcome

  PS The CD is able to start another computer (DVD)

  Hello

  You can use ODD with Windows XP Home edition? Have you noticed a behavior strange disk Windows XP Home edition?

  If possible try to check with bootable Linux CD.

• My Satellite C660-155 won't boot to the top

  My laptop Toshiba Satellite C660-155 won't boot to the top. When I turn it on, I get a flashing "-" at the top left, then the screen goes black and nothing happens after that. It's more than a year, which means he went from his guarantee.

  It happened already, about 4-6 weeks, a friend fixed but it is now back to the black screen.
  Any advice would be greatly appreciated.

  For better understanding, you must offer more specific information.
  You can enter boot options using F8 at startup?
  Figure option fix my computer in the list?
  You can boot OS in safe mode?

  Did you create the recovery disk?

• Satellite L20 260 won't boot to the top, every time it freezes with no reason

  Hi all

  I have a problem with my satellite of sad, after 3-4 days I installed a new operating system (tried with XP SP2 and Kubuntu) system does not boot to the top, every time it freezes with no reason, the only way is to perferom a new installation of the OS. What is a hardware problem, perhaps related to the RAM or HARD drive?
  x 10, Daniele.

  Hello

  It's not easy to tell if the problem is software or hardware related.
  You must install the OS from the Toshiba Recovery CD and again test the functionality

  If the laptop won't boot again freezes immediately after that installation of recovery CD, and then it could be a hardware problem.
  You can try using MemTest 3.5 tool.
  It checks the memory of a malfunction.

• Satellite C50 won't boot to the top

  Hello

  My son satellite C50 won't boot to the top. It is connected to the power grid and will arrive at the password screen but as soon as you type goes into shutdown. Any suggestions please?

  Thanks in advance.

  You write about Windows or BIOS password?

  In any case, on this virtual path, it is not easy to give an exact explanation what can be wrong there.
  Your son of many important data stored on this machine? If this isn't the case, you should try to reinstall the OS and test it with the factory settings.

  What you can try is to enter the BIOS settings and leave the machine 5 minutes to see if cell phone will go OFF. If this isn't the case, set the BIOS to the default settings and try again.

  Is the cooling fan may be strong at the start of the machine?

• Re: My Satellite P200 won't boot to the top

  Hi all
  Noobie here,
  I think I caused a problem wher my P200, it won't start, it was very slow and I went into the Task Manager and deleted some programs that were not running, but using the memory.
  In my view, there is a good chance I can I have deleted something that the system needs because it will not load upward.
  I turn it on and I get a light on the HARD drive to the front and a light in the dvd drive, but nothing else, I tried pressing F8 and put the recovery disc in but nothing?

  Anyone have any ideas?

  Appreciate any help.
  John

  I guess you are using the "F8" key to access Windows boot options and Windows is not to leave you. If this of * definitely * the case, then you must insert the recovery CD and change the device to boot from the screen as the laptop boot - can't remember which affects it is than its displayed on the bottom line. I think its possible that W7 can be repair o the problem and a full installation will be unnecessary

• Satellite A30 won't boot upward and is stuck on "ROM PXE smoothly"

  A30 won't boot upward and is stuck in a loop

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM.

  I have no recovery discs and bios does not disable all relevant parameters.

  Hello

  I assume that there is a problem with the HARD drive. You can enter the BIOS settings or not?

  Start the laptop please press F12 to view the list of all bootable devices. HARD drive is listed here?