Qosmio G30 - interference monitor external when plugged to AC

Similar Questions

• At startup, Qosmio G30 begins on external screen

  Hello

  I have a Qosmio G30 and my system is Vista ultimate

  This problem
  my pc start up startup on the external display. How to solve?

  Tried to change HWsetup LCD + Analog RGB and the problem resolved now .but my question:
  Before it's selected work fine with default "auo". What happened now? Why must select (LCD + Analog RGB) now! ?

  I format my pc, but does not not with the default selection (selected auo) must I change it manually to (LCD + Analog RGB)

  :(

  > Tried to change HWsetup LCD + Analog RGB and the problem resolved now .but my question:
  Before it's selected work fine with default "auo". What happened now? Why must select (LCD + Analog RGB) now! ?

  HWSetup changes the settings of the BIOS.
  So, I recommend checking the BIOS and configuration of the LCD screen in the first place, and then save the changes to the BIOS.
  In addition, you must use the FN + F5 option to switch to the default option (only internal LCD).

  Last but not least you must check Vista display settings if the external monitor has not been defined for the main display.

  Welcome them

• Qosmio G30 - 126 monitor become black and FN buttons do not work

  Hello

  I have small problem, ehm two problems, but may be small for you :)

  Last week, I install Vista ultimate WITHOUT RECOVERY CD...
  It's OK, but I close the cover of the book and instantly open, monitor become black and I can't do anything without restarting.
  In the Panel in feeding opportunities, bookmark 'options to close the cushion' does not work.

  Maybe it's by, because I'm not driver if exists

  And second problem may be linked with the first, but it is a mistake, because I was not discover drivers because I haven't hidden toolbar on the back Windows, where standartly is on-site.

  I don't work much hidden functions under the FN key (I think that FN + F2, F3...) F12) most keys be the side POWER without multimedia keys on the music...

  Thx for the help!

  SRY for my bad English

  Post edited by: Martiosso

  Hi Martin

  First of all it s interesting if you have downloaded and installed all the Toshiba Vista drivers that are published on the European driver Toshiba page?
  All drivers must be installed in the correct order!

  If I'm not mistaken the Qosmio G30 - 126 belongs to the series of PQG32E. It was delivered with HD DVD player, and therefore, you should choose the drivers for the Qosmio G30 HD DVD (PQG32E)!

  Please first check the file txt Instructions of Installation, and then install all the drivers as mentioned in this document.

  With regard to the issue of the display;
  You need to install the correct driver NVIDIA of the Toshiba page!

  The keys FN and control buttons don t work because the Vista Toshiba value added Package has not been installed. This package contains applications that are needed to get all the features of Toshiba running!

  Good luck

• Qosmio G30-204 PQG32E hangs when you install the display driver

  Hello

  I have a PG32E Qosimo G30-204 age of two weeks.

  He has recently developed a graphical corruption as horizontal lines of thing that resemble lines of memory corruption. These either go away or reformed in another location when you scroll or move the page.

  The installed display driver version is 7.15.10.9759 and there is a newer version on the download page.

  Tried to install it twice and both times the machine froze during installation in a case goes blank after a refresh. In order to proceed was to remove the power and the battery from the machine. Then looking at Details of the driver after restart a normal life, even if the version number has changed the machine freezes at some point later, sometimes looking at the details of the driver or by opening a browser etc...

  In both cases I had to go to safe mode and use back driver to make the machine can be used (but always with graphics issues).

  Any suggestions?

  It is possible that the graph of problems occur only after the machine has been for a while, but again when they appear does not remove them.

  Leave the machine off for awhile remove them because they do not produce all the time so maybe an overheating problem?

  Kind regards

  Andy

  Hello

  I assume you mean the graphics driver for Vista. Am I wrong?
  I visited the site driver Tosh and compared to the Vista nVidia Driver version and surprise, surprise, there is a more recent version published on 23/04/07 and the version is 7.15.10.9813.

  Check this driver

• Qosmio G30-194: no sound when watching TV

  I have a G30-194. TV tuner detects the TV in my area, but they have no associate at all. She select the ROMANIAN countries, also the corect Pal/Secam system but no result. Can we know what is the problem.
  Thx a lot.

  Hello

  You hear the sound during playback of music from CDs or mp3 files?
  If the sound comes from the speakers for listening to music, it of not a sound card problem. In this case, in my opinion, the wrong settings are responsible for this problem.

  You have several options with PAL/Secam parameters. I think you should check what parameters are available in the Romania.

  I received information about the update of the TV tuner driver. Please check the version of your laptop and maybe you need to update the TV tuner driver.

• Qosmio G30-126 - no sound when I use the TV tuner

  I can't get the sound to work when I use the tv tuner in windows media Center. Can someone help me?

  Hi dude

  First of all, you should check if the sound is set to high.
  This can be checked in the-> sound and audio devices Control Panel

  Did you also check the details of the Media Center settings?

  Under settings-> General-> Media Center installation, you should check the configuration, the parameters of your speaker and Set Up TV Signal.

  Please select the country of law. This is important because each country using different PAL signals.

  Oh I forgot to mention that you can change the settings in the BIOS of PAL and NTSC.

• Qosmio G30 - black screen on external monitor

  Qosmio G30 (PQG32E) under Vista Home Premium, driver NVIDIA GeForce Go 7600, 7.15.10.9813

  I can't get a picture on a monitor external (I tried two different monitors). More precisely:

  "Windows Mobility Center" will recognize that a monitor is connected
  "NVIDIA Control Panel - Display Change Configuration" will recognize the external monitor ('Select poster that you want to use' shows 'Display of the laptop + Sony SDM-HS73', which is the monitor plugged in ext)
  but no matter what configuration I try using Fn + F5 or change of display Configuration, I can't do anything but a black (backlight) display on the external monitor.

  The monitor is receiving a video signal correctly: when he is off in laptop only the setting Fn + F5, it displays a warning 'no signal', but when turned on again I just get black.

  I tried to change the resolution for the external monitor settings. They exactly match the native resolution of the monitor. Still nothing.
  I tried 'Clone' and 'Dual View' mode.
  Tried various different orders to turn on the computer laptop and monitor, Plug and unplug the device, etc.

  Having installed the latest driver for the Toshiba (see above) site. Have NOT tried to install any other driver from NVIDIA site, as she warns to use Toshiba - but that's worth a try?

  The clean laptop screen and all other aspects of the video are very good.

  It worked ok in the past (I think that before I did the upgrade to Vista when it was still on XP).
  Should I just wait for another update of Toshiba driver and maybe Vista SP1?

  I really hope this isn't a hardware problem, because the monitor is recognized etc...

  Jonathan

  What port you used?
  The (analog) external monitor port or the output port D-video?

  View as far as I know that if you used the external monitor (analog) port, then you should choose analog in the nVidia-> current view

  Then, you can use the FN + F5 key to switch between the two views.

• How to connect the external monitor for Qosmio G30 with a HDMI cable

  Hello

  I have G30 also I have Samsung 32 LCD screen LA32S8
  I have the HDMI cable. I'm trying to connect the Qosmio G30 with the LCD screen and watch nothing displayed.

  I would also like to ask;
  Can I use the LCD screen as a monitor for laptop or I plug it into the PC output?

  THX and I need this help.

  Hello

  1. attach a TV or monitor to the Qosmio G30 HDMI while both units are in a State "turned off the power.
  2. turn on the TV or monitor first and then the Qosmio G30.
  3 Qosmio G30 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV or monitor.

  Check it out

• Qosmio G30 - external display problem (HDMI)

  Hello

  I have Dell UltraSharp 2407WFP display with HDMI and DVI (with HDMI DVI converter) entry - I use HDMI as my primary connection. My Qosmio has NVidia 7600 Go card with the latest drivers provided by Toshiba for Vista 32 bit (version 7.15.10.9813).

  My monitor was working fine months ago (same thing with my HDMI TV) I had no problems - but now I have a constant flickering problem (goes black watch my office then becomes black again) computer laptop monitor and no image on external display at all and I get 'balloon' message in the taskbar that my display driver has stopped working and it recovers when I leave my HDMI cable.

  any ideas?

  Thank you
  Bran.

  Hi Brani

  It seems that the error comes from the display driver.
  Why you n t try to remove the old display driver and try to reinstall the graphics driver of the European driver Toshiba page
  You may notice some improvements.

  By the way; It might be useful to know that the Qosmio G30 supports the standard HDMI V1.1 (up to 1080i resolution).

  Good bye

• Qosmio G30: Can I use component video software plug-in to connect the Gamecube or PS2?

  The Qosmio G30 has a VIDEO-IN bit for the red/white/yellow wires... So I wondered if this meant that I could connect my PS2/Gamecube/similar to television, playing games on my laptop, save me money when I move to College :)

  Indeed, if I pretend that I'll put up a set - top box for the TELEVISION, the Gamecube appears under "Video Composite", I just can't save like a channel or anything at this point...

  Someone help? Would be very grateful...
  Thankee.

  Hello
  The s-video-in port can be used to connect and to import data from the external device such as an analog video camera or VCR. Imported video can be edited or written on a DVD disc.
  Video port can be used to connect the external device such as a game console

  I think you should also consult the user manual because you will find the full description on unique ports and use.

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• Qosmio G30 hums when it is connected to a sound system

  I use my laptop Qosmio G30-201 with my djing system. When I connect it to my mixer, I get a strong buzzing sound coming through the speakers. If I disconnect the charger it stops buzzing. Can I do to stop this noise I need to charge my cell phone while I'm djing on it?

  Hello

  I studied in this forum and found two discussions and debates on similar problems.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22763&MessageID=83719

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22626

  The point is that your Qosmio and djing system have different potentials to ground and the induction of the voltage in a loop of mass. Maybe you can try to connect the laptop to the source without cause.

  Or you try the solution posted by user Thom20

  Good luck buddy

• Qosmio G30: Boot from HDD external ESATA

  Dear all,

  I am trying to boot from a disk external HARD connected with an express/34 card that has a START function. It works like one charm on another laptop manufacturers because the express/34 card is recognized without problems. I can choose the external sata HARD drive as a bootdevice.

  My BIOS (V3.5) Qosmio G30 seems not to have this option. Any suggestions? Thank you for your comments!

  card esata Express/34: http://www.cooldrives.com/2saexcadues.html (ROM BIOS supports boot features)

  Kind regards
  Nboss

  Hello

  These function the BIOS boot options.
  The BIOS that is installed on the G30 is no option. So unfortunately, but there is nothing to do!

  Best regards

• Re: Qosmio G30 - RAID of the problems when installing the OS

  I got my Qosmio G30-161 for half a year and he had thought should be time to reinstall everything, so I could get rid of things I didn't need (programs, viruses and uninteresting video clips).

  So I took my XP MCE Cd and tried to install, and I am guided me through and come to the place where I had to choose between unknown 1st and 2nd 3rd stripping mirrored. I chose the stripping as I wanted my drives to be in one. Then when I pressed "next" it gave me the error message "1005 - HDD is not ready?

  I tried to go into the BIOS and change the setting of different parameters of Toshiba told me to, but he also warned that if I changed my OS settings will need to be reinstalled. No problem. But I still get the same message error "disk is not ready?". So now, I have to use a computer other than mine to check the forums and mail etc.

  Anyone know what I need to do? I'll be happy with anything as long as I can have both my hard drives (60 + 60 GB) and OS work. :)

  Please help, I would urge for her, because the computer is the one I use for my school work. Feel free to ask questions about the tricks of the system. If you have an answer, please let it be simple, because I really don't want to mess up again ^_^

  Please check the details relating to the installation of RAID user's Guide.
  Usually if you use the clean Windows XP disk then you need to include the RAID drivers first.
  Without pre-installed RAID drivers HARD drive will not be recognized and you will not be able to install the OS!

• Qosmio G30 / ADSL Linksys router interference with opening doc Word & Excel

  Qosmio G30 is connected via a Linksys WAG354G V2 ADSL wireless router successfully. However, when connected, double click to open a Word or Excel document causes system hang for up to 2 minutes then opens OK. The computer wireless switch allows the document to be opened immediately.

  You can also turn off the router has the same effect. The Linksys working properly through the Linksys Wireless card on an old Toshiba 2770XDVD with no grip. Two computers use XP (G30 is XPmedia Center). I don't particularly want to change the router as there should be a logical explanation/solution.

  Any suggestions?

  Post edited by: ADMIN

  Hello

  my recommendation would be:

  -update your computer (BIOS)
  -update your operating system (Windows updates. Updates Office)
  -update your applications
  -Install the latest drivers

  May I ask what wlan card is installed in the affected machine? Should be an Intel processor, but which. I strongly recommend allows you to check the Web site of intel for the latest drivers about this card.

  Welcome them