Q. R50e 1834-S5g 05/09 HD upgrade Type?

Similar Questions

• Save type of R50E 1834-S5g 05/09 software unavailable on laptop

  Hi everyone, the backup software that should be put on the R50e is missing/deleted how can I get a replacement? can anyone help relating to this issue. I have a Windows 7 disc that I can put on, but I'm afraid I'll have questions re drivers if I do. Any help would be appreciated gratefully. Thank you, Glenn

  You can install 7, but with the graphics card on the R50 the aero does not work. I tried 7 on my R51 it works but not as it should I also tried vista, it works well on the R51, you can go with vista as my R51 it worked for nearly a year with no problems. whatever version (7 or vista) you go with the thinkvantage software will work

• Crash blue screen on R50e, 1834, BYG - xp family

  
  

  This question is reolved.

  Blue screen crash was due to obsolete wireless adapter driver.

  Updated from the link below and R50e is not only functional but faster than ever!

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=TVSU-update#HP

• R50E

  Anyone know where I can get a driver control of network for a S5G R50e 1834

  I tried the download section on the site but that you are unable to work.

  Any help would be appreciated.

  See you soon

  Welcome to the forum!

  The 'network controller' in question is your WiFi (Intel 2200BG) card and the driver is here:

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/6hwc05ww.zip

  After downloading and unzipping, you need to go to C > drivers > win > Wlanint and run the Setup file from there.

  Good luck.

• Anytime W7 home prem upgrade to profess W7 cannot be rerun on the same machine to possibly fix the errors.

  Computer: HP Pavilion G/1070 us laptop. Original OS W7 64 Home Premium SP1

  15 Aug-2914, I had some freezes and problems of instability and learned on the web that a upgrade type installation could clean debris from its difficult use of several years.  I went on the website anytime upgrade Microsoft and bought an Anytime Upgrade for W7 64 SP1 PROFESSIONAL and installed from the Internet Anytime site. The key to the new system has been inserted automatically and a copy sent to me by email with the reception that I printed.

  The process went well and in the end my initial home screen was displayed. I checked email and tried a few other tasks, and everything seemed fine... I clicked stop, and (as I remember) a stream of file system names began to scroll to the bottom of the screen indicating that they were part of the upgrade process. I turned off the computer.

  This morning, I restarted Windows and experienced some of the friezes original and instability... I reasoned that if I restarted the install of Win 7 Premium and careful I might be able to check updates and fix the problem. This was not possible. The Windows Anytime Upgrade site rejected the upgrade key that I was copying the receipt of Email for my purchase (I tried at least 10 times). I could not find any contact information on the site and I noticed that my received email was sent from an unmonitored address.

  THANKS FOR YOUR HELP

  (1) run chkdsk as follows:

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volume to check the next time that the system/PC reboots,
  Enter: y

  Now, restart the PC.

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php
  Note: Unfortunately now includes a lot of bloat-ware, be very careful when installing remove bloat-ware.

  =====================================================================

  2) run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  = If you are still having problems =.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  Only one solution was either by picking up the Internet
  and removal of SP1 - or a combination of both. Then re-installation of SP1
  Save this method for a last resort.

  --------------------------------------------------------------------

  (C) you get a PIN number with the "Anytime Upgrade", if yes enter the PIN here to obtain a product key: https://windows.getmicrosoftkey.com/

  Support for your product key: https://windows.getmicrosoftkey.com/Home/Support

  --------------------------------------------------------------------

  (D) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (E) if still Anytime Upgrade fails, turn off User Account Control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (F) if it continues to fail, try the following 3 methods:

  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators systems product keys, this applies also to the VL (Volume License)-MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• Recovery CD does not start

  Hello

  I have an old IBM ThinkPad R50e (1834-PTG). When I originally bought in 2003, I created a set of recovery 6 CDs I kept this set in a place course and decided today to recover the laptop factory settings. The problem is that the computer won't start any recovery of 6 CDs (does not start other CD bootable without problem). CDs are not empty and contains a directory named "RECOVERY" with a bunch of files that it contains.

  I tried to use specify the CD-ROM drive as first boot device, to use F12 to specify the device, nothing helps.

  How can I use these CD?

  I found a ghost image, which is the result of a whole new R51. I'll be able to use it to recover my system? Will be the key of Windows that came with my computer work with this image?

  Well, it turns out that there was another drive (surprise) the names "Recovery boot CD. Now, the recovery process begins without any problem.

• Very dark LCD

  Dear all

  Greetings

  I am a newcomer to this forum and would like to ask your help.

  My laptop: -.

  IBM Thinkpad R50e 1834 /model A58/type.

  Disk HARD-40 GB of memory-750 GB

  Home Edition OS - XP Winsdow.

  My problem: -.

  My LCD has been blurred for more than a month. I see that a very small image with the help of a magnifying glass and a light live.

  After downloading LCD/video driver from the IBM web site and it makes no difference.

  Please help me solve the problem.

  Thank you

  Haris

  Your CCFL Backlight may be dead or dying on you. You would need to replace the CCFL (difficult) or replace the LCD entirely (maybe you should just get a new laptop).

• Installation failure of OEM Windows Home Server 2011 - network continually devices do not found/installed

  Tried to install OEM Windows Home Server 2011 integrated custom server with ASUS M489GTD Pro Mobo and AMD Phenom IIx6 1055 t processor. Installation (3 attempts) would not end when network devices do not have to be found. Having read a number of user group locations and found amount of siginficant discussion on similar type problems. Searched and copied device USB and NIC brand drivers but the installation of WHS 2011 has been unsuccessful. Have since with success installed Windows 8 Preview of consumer on the server by using 'Device Manager' to find installed drivers located in appropriate files and C: / drive. Question: a plan 'best case' would try to do a new installation install WHS 2011 on my server or to an 'upgrade' type which may keep the driver folders/files? Thank you

   

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro on Windows Home Server public. Please post your question in the Windows Home Server appropriate Forum. You can follow the link to your question:

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

• Need info.

  HP Pavilion AY014AA-ABA aa4310f desktop PC

  Windows 7 Home Premium 64-bit

  Card mother Narra6

  I would like to know if this motherboard (narra6) would support a Solid State Drive Corsair Force 3 SATA III and that this motherboard can support an AMD Phenonm II x 4 945 Deneb 3.0 GHz quad-core processor and if it it's going to be ok on the cooling fan that came with this PC.

  Here is the link to the specifications of the system;  http://support.HP.com/us-en/document/c01949097

  Here is the link to the motherboard plug;  http://support.HP.com/us-en/document/c01925534

  I would say that this system looks like it will support the SSD Corsair Force 3 SATA III to SATA II transfer rate only. You won't realize the full potentail of the player in this system, but it should work. As for the CPU, read below;

  Motherboard supports the following processor upgrades: type of Socket: AM3, TDP: 95 watts
  AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)
  AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe
  AMD Phenom II X 2 5xx (Callisto)
  II AMD Athlon X 4 6xx/6xxe (undactylopodite)
  AMD Athlon II X 3 4xx/4xxe (Rana)
  AMD Athlon II X 2 2xx/2xxe (Regor)
  AMD Sempron 1xx (Sargas)

  So, the AMD Phenom II x 4 945 Deneb will work provided that it is one of these plateau AMD numbers; HDX945WFK4DGI, HDX945WFK4DGM... As regards to the cooling goes, the stock cooler should do as well. But it never hurts to have a very good configuration HSF.

  Frank

• SRM point again vCenter

  We have decided to take our guests to a new vCenter and don't want a lot with SRM (it is installed on its own virtual machine in the environment and use a MRD).

  To have a quick glance I think I should be able to do a repair on the existing installation of the SRM and point to the new vCenter, during repair I suppose it will ask the IP address of the new vCenter? As a result, I hope to be able to upgrade to 5.0 5.5.8, could I possibly do the upgrade and repoint at the same time?

  I saw the article, but I guess I won't need to follow if the installation program updates the IP for me?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2008033

  Thank you very much!

  I think the best option is to do a fresh install, because if you plan to switch to version 5.8, this upgrade path is not supported, take a peek: upgrade of Site Recovery Manager

  Important

  The upgrade of Site Recovery Manager 5.0.x Site Recovery Manager 5.8 is not supported. Upgrade of Site Recovery Manager 5.0.x to a release of Manager5.5.x of Site recovery before upgrade you to Site Recovery Manager 5.8. See upgrading of Site Recovery Manager in the documentation of the Site Recovery Manager 5.5 for more information on the upgrade of 5.0.x to 5.5.x.

  And see what are the documents tells a new installation of vCenter and the MIS upgrade: Types of upgrade that supports Site Recovery Manager

  Type of upgrade	Description	Support
  Update the Site Recovery Manager on-site	The easiest way to upgrade. This path is to upgrade instances of server vCenter Site Recovery Manager-related before the upgrade of Site Recovery Manager server. Run the new version of the Site Recovery Manager installer on the Recovery Manager Server host computer, connect to the existing database of existingSite.	Yes
  Site Recovery Manager with migration update	This path includes improving the vCenter Serverinstances associated with Site Recovery Managerbefore the upgrade of Site Recovery Manager server. To migrate the Site Recovery Manager to a different host or a virtual machine as part of the upgrade of Site Recovery Manager, stop the existing Site Recovery Manager server. Do not uninstall the previous version of the Site Recovery Manager Server and make sure you keep the contents of the database. Run the new version of Site Recovery Manager installer on the new host or virtual machine, connect to the existing database.	Yes
  New vCenter Server installation with migration ofSite Recovery Manager	Create new facilities of vCenter Server and migrate these new instances of server vCenter Site Recovery Manager Server.

  N ° you cannot migrate the Site Recovery Manager Server to a new installation of vCenter Server. Site Recovery Manager requires a single object on the server vCenter Server identifiers that are not available if you are using a new Serverinstallation vCenter. To use a new Serverinstallation vCenter, you must create a new Site Recovery Manager Server installation.

• Passage of 10.2.0.5 to 11.2.0.3 - password problem

  Servers: Linux 5 & 3 Windows (separate servers)

  Database: Oracle 10.2.0.5

  Update to: Oracle 11.2.0.3

  Upgrade type: Inplace upgrade (DBUA) on the same servers

  I'm about to start our Oracle Prodution of Oracle 10 g 11 g database and get a small question:

  Will all databases of the service accounts or user names or the schema AND their passwords moved to the new environment?

  I am especially worried about the password. I don't want to change them in the new environment. We have hundreds of jobs from anywhere in the world using these user names and password and do ' t want to change.

  Example: Will be the username app_users and password (PassWordF@rAll)

  can be used in the new environment of 11g?

  Thank you

  Albert

  Since the binary 11.2.0.3 must be installed in a new ORACLE_HOME, upgrade is not an upgrade "on the spot" - I think that your definition of "on-site" refers to the same physical servers.

  As a best practice, all updates should be one test cycle to ensure that the functionality of the application is not affected - preparation for the upgrade of the Oracle database

  Oracle recommends to not use the character @ under the passwords, because it can be misnterpreted - Oracle Database Security. If you use the character @, join the password on quotes when used. Stating with 11g, passwords are case-sensitive - this option can be turned off - setting up authentication

  It is recommended to follow all steps of the Guide of upgrade - materials - all accounts, IDs, passwords etc. will survive the upgrade - only extensive application testing can verify this.

  HTH
  Srini

• Optical drive for IBM Thinkpad R50e, type 1834.

  Have been looking for a DVD RW for an IBM Thinkpad R50e drive, type 1834. This has proved to be not easy.

  The support page from Lenovo for DVD options for "hard disk, CD-ROM and the options of DVD - ThinkPad R50, R50e, R50p, R51, R51e", located at http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-53136, States 'Note: not supported with the ThinkPad R50e systems.» And my model, 1834, is indeed not listed as supported in the "optical drive options.

  Why, when I specify the model and the type I have, so a lot of readers not supported those listed and not supported? I'm not interested in optical drives that does not fit. I would like to know who does.

  I do not have the old original disk so I can't check the number of parties on the matter. So, what number of coins is the DVD RW drive has that fits the IBM Thinkpad R50e, type 1834?

  Oerjan Pettersen

  one of them will work 92 p 6575 / 13n6827 / 39t 2723 / 39t 2861 it says not supported because it came with the cd-rw/dvd not dvd - rw

• R50E does not start after upgrading memory

  I tried to upgrade this laptop from the factory of 512 MB to 1.5 GB. I got a Kingston 1 GB DDR - 333 SO-DIMM, but after I installed it, the laptop does not turn. Only the power led is lit.

  I don't know why this happened, because all tests indicate that it should work.

  1. the new stick is ok. I tested it in another laptop and it worked. I also cleaned the contacts with isopropyl alcohol.

  2. the memory locations are ok. The old memory works in each slot.

  3. I tried to install the new one stick in a slot and it did not work.

  4. This update is officially supported by record of IBM and BIOS is up to date (v2.1, December 2006).

  Unless I'm missing something there is a confusing question. Unfortunately, I don't have an another 1 GB DIMM to test with.

  yehuda1 wrote:

  TBut I don't think it's a matter of density. something fundamentally wrong with this system. I just discovered that I can not upgrade the memory somehow, even not with a stick of 256 MB. The system starts only with the current key.

  OK... This is not good, but I have to tell you that...

  I guess it's time to throw the boy part of retirement and move to a new machine...

  Good luck.

• R50E - vs DDR DDR2

  Hello. Looking to upgrade the memory on my daughter R50e. It is currently configured with 512 M running Windows XP. Looking at the price, I can get 2 x 1 G DDR2 SO-DIMM for the price of 1 G DDR SO-DIMM. Can someone tell me if the R50e will support DDR2 and if so, what spec'? Thank you very much in advance for your wisdom! R

  Your R50e only supports ram SODIMM DDR PC-2700/PC-3200

• No service after upgrade the server to 5.2 on El Capitan

  I have a web server that was doing very well until I left the 5.2 update suggested to install OS X Server. I can't get to broadcast web pages. Screen sharing works always and nothing has changed on the routers, etc.

  I restarted the server after the update and restarted the server itself several times but keep getting connection via a browser failures.

  I did the upgrade even on other servers as well as the upgrade of Sierra. This server is running El Capitan, and is the only one that gave me problems. 5.2 server is not compatible with El Capitan?

  Some additional info:

  I can connect to the server through ftp and other services; just no web service.

  Port tests show that port 80 is not blocked

  Using the IP address I can get to the window of the home server.

  Accessibility means no services available

  Websites is on and I can't find anything that is not defined in law or is different than before the update.