Qosmio F20 - 135 - location 2 does not work

Similar Questions

• Qosmio F20: PCMCIA sound card does not work

  Hello world...

  I had a problem with my Qosmio f20. My creative PCMCIA card has been propely work up until a week ago. Now no reason my laptop could not detect it. Even after a format.

  All other works of PCMCIA cards.

  plssssssss help

  The case is clear for me.
  If any other job cards PCMCIA correctly on the F20 and only PCMCIA doesn t creative work then I guess that the card has a malfunction.
  You should test this laptop on another card. If it doesn t work so card is dead.

• Qosmio G30-155: video Capture does not work using s-video in port

  Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
  Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

  In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

  It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

  Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

  Can you please explain what you want to do exactly?

  Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

  To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

• F20-137: TV Tuner does not work on MCE

  I just purchased a Qosmio F20-137 and when I set up the TV Tuner (DVB - T) I had no problem. However when I try to watch TV on Media Center he frequently stutters and loses its signal (about once every 2/3 minutes). I tried a couple of different antennas ready (DVB - T), but the problem persists.

  I thought it was due to the TNT being strong enough signal. However I recently bought a £45 Freecom (DVB - T) usb to my desktop and it rarely or never stutters or loses its signal. The USB device does not work on the Qosmio so that I couldn't try on that.

  Is that what this indicates that there may be a problem with my laptop? Or can anyone suggest a possible solution to the problem?

  Thank you

  [Edited by: admin November 26 05 08:32]

  Hello

  Well, it s a strange question.
  Have you tried to watch TV via Qosmio player?
  In my opinion, you should check if this problem occurs when the Qosmio player.
  Please check.

  Good bye

• Qosmio X 70-A - keyboard does not work properly

  I have a Qosmio X 70-A-12N, newly purchased last September, 8.1 Windows 64-bit.

  After working properly (and lots!) for half a year, the keyboard started to stutter.

  If you type a paragraph or two, with say 250 words, each time and now, to say that every 10th or 20th Word (undpredictable), a key shot does not work. I tried another keyboard via USB: no problems, so it has to do with the built-in keyboard of Qosmio.

  It is not specific keys, and it is not the pressure with which you press the key.
  Any key can be be ignored from time to time.

  All drivers have been updated to the latest questions, the BIOS is 1.50.

  It seems that the problem is more important when working on the battery (not sure).

  Is it a software or a hardware problem? Should the keyboard be exchanged?

  My first thought was last updated from the BIOS, but according to the Toshiba download page you have latest version of the BIOS.
  You know that's not easy to say what the problem is here. I can't say with certainty if there is a problem with the keyboard, but maybe you should contact the nearest Toshiba service provider, explain the situation and ask for help.

  They know what needs to be done. at least, they have very good diagnostic tools and it is possible to detect the problem.

• Qosmio X 300 - 11W - TouchPad does not work in mode 'sleep'

  TouchPad does not work in mode 'sleep'. I can't wake up my computer using a touchpad. I downloaded and installed a driver for Windows 7 32 bit from a page of the Synaptics driver, but it did not help.

  Can you wake up your Qosmio using the power button / stop?
  You close the lid when the laptop enters the sliding mode?
  After you open the laptop lid should wake up. It work correctly?

• Qosmio G50 - Fingerprint log - it does not work

  I had to reinstall the software (like new) on my Qosmio G50 due to problems. (vista 32) Reinstall the fingerprint logo does not work and he keeps asking mr to register my fingerprints, when I try to do, he says can't open database specified. No idea how to get back on that.

  I tried to remove and don't reinstall, no luck
  I tried the fingerprints of delete on the settings in the event of corruption, it will not.
  Any help would be greatly appreciated.

  See you soon

  Here's a very interesting FAQ from Toshiba on how can you remove the fingerprints fingerprint reader?

  http://www.MyToshiba.com.au/support/items/FAQ/386

  Please post comments if you can remove fingerprints already recorded using this documentation

• Qosmio F60 - 11F - FN key does not work

  Hello

  the FN key in my laptop suddenly does not work and so I can't use with combination keys to control my laptop. I tried to make it work with the HWsetup, but there is nothing special for her in the keyboard tab

  I went to the download page for the driver to try reinstalling the driver, but I could not understand what driver should I download

  How can I make the FN key still works?

  My laptop is Qosmio F60 - 11F

  Please check if you can find the option restart Flash Cards in the start menu > all programs > Toshiba > utilities. If you have please use it to restart. If this will not help, try to reinstall Toshiba Value added Package. This package contains the utility of Flash Cards.

  Post comments.

• Qosmio X 875-Regza-link does not work

  REGZA-link does not work. When I connect to laptop to Toshiba TV HDMI cable, there is no icon regza-link on TV and I can't control the media player to the TV remote.

  At your Qosmio laptop factory settings?
  With other words do you use with preinstalled OS that you got with it?

• Qosmio X 875 - ECO mode does not work immediately after Win 8 upgrade

  I used the upgrade Toshiba Upgrade Wizard to Win 8. He succeeded well uninstall the incompatible software before the upgrade and install the new Toshiba and driver versions after the upgrade.

  I activated the ECO mode, and to my surprise, it does not work as before (in Windows 7):

  * Now, it works with the brightness to level 1 *... very dark. Before, ECO mode allowed me to go up to level 4 and was always considered in Eco mode...

  If I increase the brightness, the 'eco mode is disabled' message opens immediately.

  How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?

  BTW, I am owner of a Qosmio X 875

  Post edited by: qosmitto

  > How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?
  Contact your Toshiba authorized service provider in your country.

  Read this:
  + What is the TOSHIBA eco Utility? +
  http://APS2.toshiba-tro.de/KB0/FAQ2503AT0000R01.htm

  > It changes the brightness of the display of level 4, changes the brightness of the grey screen of level 1 (* 4),.
  _The * 4 means only on models with Windows7 installed _

  I guess that the previous configuration was only Win 7.

  8 win was made for mobile (use of the Tablet), the energy consumption of battery is also very important plant help to win 8. The consumption of the battery must be taken at the lowest level possible.
  So I guess that now help win 8 ECO medium mode and save the power max and long battery life time working at a max level.

• Qosmio G10: The operating system does not work corectly

  Hello. My problem is that my windows xp does not work corectly, mousecursor, sounds, videos, games, programs, everything turns into a ' stop and go '. as the cpu slows all the 1-2 seconds. I reinstalled windows now 4 times and any document in the format hd´s.

  Don t know what to do...

  and a second question... maybe this could be the answer for the first ;-)

  in my hardware-registration of my system windows are two elements, for I can't find a driver.

  -PCI-Device
  -videocontroller fuer multimedia (German ;-))
  in English systems, maybe it's the multimedia "media control device" or "videocontroller" or something...

  does anyone know if I can get the drivers, because they´re not listed on the toshiba site. and my backup-disk system was stolen. (sounds strange... I know :-))

  OK, please give me some advice, if you have any ideas!

  THX a lot, patrick

  Hello Patrick

  First of all, it will be interesting to know if the unit is pre-installed by recovery media. The installation of Qosmio is quite complicated, and I recommend you use the restore CD.

  In this way it is not possible to give a precise answer because I don't know what kind of things is installed on your device. I guess in your case, some application (such as the virus scan) runs in the background and your HARD drive can be pointed out.

  If your recovery DVDs is stolen, you can order a partner of service authorized in your country.

  Good bye

• Qosmio F60 - 14Q - FN key does not work with Win 8.1

  Hello

  FN key does not work when I press the FN + F1 keys... F12 after installation win 8.1 instead of win7 which originated with my camera.
  is it possible to make it work even once with 8.1 win and if I need your instructions.

  Can you please tell us what model of laptop do you have?
  Your machine is supported for the own Win8.1 version? Did you check that?

• Qosmio G30-195 - infrared receiver does not work after sleep

  Hi all!

  I have a problem on my laptop after Exchange of service of the motherboard.
  Once I booted Windows (Microsoft eHome transceiver) IR receiver works well in all programs, but when the system resumes from sleep mode, the IR receiver unloads from memory and can not find the search for material.

  If the remote control does not work until I have to restart Windows. Windows XP SP2 and Windows XP MCE behave the same. Before the exchange of motherboard I didn't you have a problem.

  What can I do with this?

  > What can I do with this?
  Contact service again and tell them the same thing. They need to know why this happen.

  By the way: you can use other USB devices connected after waking from sleep mode?

• Qosmio G20 - its Media Center does not work properly

  I do not often use the TV tuner, but when I went to save a program of the week last I found that I was getting loud hissing and sound distortion. Although I could play back a few straight recorded music.

  I ran the TV Tuner, settings and which seemed to cure her.

  I wanted to watch this program and I found that I was getting the loud hiss once again and when I run the program saved it seems to run fast. But now recorded music also does not work.

  I ran settings again but no difference this time.

  I open the Volume control window

  Adjust balance on volume control and hissing on the channel left and music distorted on right channel - running pitch fast and high.
  When the track ends then the hissing sound stop

  If I set the controls of the wave
  Keeping your balance no effect now, whistling on the left and right
  Adjust the volume affects track music, but no effect on the whistle until right down when he cut the sound it
  MUTE button mute puts the two

  Registering the program is OK if played using Windows Media Player.

  Any suggestions as to what could be bad?

  PC running Windows Media Center Edition

  Windows all sounds have been affected, that is when I ran some of the Windows Panel I just got a burst of noise. As soon as I closed the library was back to normal

  Martin

  Post edited by: mbriscoe

  Hello

  I m not 100% sure if I understand the problem correctly, but it seems that the problems of sound appears only when you use and play audio files with Windows Media Center.
  The sound is ok, when you play Windows Media Player. Am I wrong?

  Hmm maybe, there is a registry or application malfunction.
  Try to update the TV tuner driver and audio driver.

  You can remove the sound card in the Device Manager and after reboot, install the latest version of the sound driver.

• Qosmio X 300-key Fn does not work

  Hello!

  My work does'nt-Fn button.
  I use Windows 7 Professional 64 bit and I downloaded & installed the value added package for Windows 7 64-bit.
  But my Fn key still does not work.

  So I uninstalled all drivers Toshiba again and reinstalled them.
  Nothing seems to work.

  What can I do?

  EDIT:
  I tried to find the Flash Utility card drivers for Windows 7 64 bit. But I can't find them anywhere!

  Post edited by: wuumbs

  > I tried to find map Flash Utility drivers for Windows 7 64 bit. But I can't find them anywhere!

  Of my knowledge Support Flash Card utility is not related to a specific model laptop.
  On my Satellite a series of laptop I installed Support utility of the Flash card that I found in the section L500 and it worked.

  Try this too maybe you control also the series which is more recent than L500.