Qosmio G30-195 - infrared receiver does not work after sleep

Similar Questions

• Qosmio G30-155: video Capture does not work using s-video in port

  Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
  Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

  In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

  It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

  Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

  Can you please explain what you want to do exactly?

  Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

  To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

• Satellite U940 - backlit keyboard does not work after sleep

  If my computer goes to sleep the light most of the time does not work. CTRL-Z is nothing.

  I have reset the values by default and still no luck. I need to reboot to get it to work again.

  I see it as one problem for others:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70512

  Looks like you have created several post on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71599
  Recommend to follow a thread to avoid misunderstandings.

• Satellite T110-121 - Wireless does not work after sleep in Win7 Home Prem 64

  Hello

  I bought Toshiba Satellite T110-121, with Windows 7 Home Premium.

  Problem:

  1. after going into Sleep Mode, when he wakes up, my WIFI does not work, unless I'm in wireless network card setting, Advanced tab, then I change the Tx to say 100% to 75% power level, then the WLAN will work.

  2. I tried to adjust the setting for power management on the network card for maximum performance and does not disable during sleep and also in the Bios but nothing is

  3. I use Realtek 8191SE drivers have been updated (wireless card, Ethernet, Bios)

  Thank you

  As much I know Tx power level option must be set to Auto.
  Have you noticed the same behavior with Auto option?

• keyboard does not work after sleep

  I have a light keyboard Logitech model Y-UY95. When the awakening of the mode standby the keyboard does not work.  Anything can be typed. I have to restart Windows 8 and then it works again.

  Had a similar problem on a HP Elitepad 900 go to sleep and not waking up... update the firmware/bios fixed it.  This known problem when I called HP, was not documented any wher however

• Qosmio G30: Cam Sony MV does not work with port IEEE 1394

  Qosmio G30-117 does not support my Sony DCR-IP5E (a micro video camera) port ieee 1394. I tried to use pinnaccle studio 9 and video ulead studio 10, but I could not see my cam because of these programs.

  There is no problem if I install a new win xp media center edition (retail pack) and CDTOOLS drivers. But I want to use my setup of the Qosmio factory, I don't want to buy a new win xp media center edition.

  How can I solve this problem?

  Thank you all.

  Hello Amon

  I tested it with Qosmio G20 and my Sony camcorder using the same port.
  I tested it with Windows movie maker, WinDVD Creator, Adobe Premiere and Ulead Media studio Pro 8.

  You may believe, but each application was able to see my cam and I copied movies on the HARD drive, edited and created DVDs. I don't really know what is happening in your case, but when you connect your switch cam on game mode, and the cam must be recognized as new hardware and listed in Device Manager.

  When it works well to start the applications and check again.

• Qosmio X 870-button 3D does not work after reinstalling

  Hi all

  I like a nice clean install I always install windows me, that's what I did with my new Toshiba Qosmio X 870.

  I got everything to work. There are unknown devices not on the left, but the 3d laptop computer button does not switch to 3D. Instead, I have to rightclick the desktop > Setup NVidia > check / uncheck the box 3D.

  Being the lazy person I am I want to reduce the number of shares I must perform to toggle the 3D, so I want to restore the function of the 3D button.

  I found on the forums that I need to install the "TOSHIBA Remote Control Manager", here...

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=270410#270410

  but I can not find this piece of software anywhere.

  Am that I on the right track here? Or should I do something else entirely to restore the button?

  Hello

  > but I can not find this piece of software anywhere.

  You can find this software on the Toshiba UE driver page in the section of the Qosmio X 870 driver:
  [Remote Control Manager v 3.0.1010.1 for Win 7 64 bit | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 231 & selProduct = 7506 salt ShortMod = 3728 & language = 13 & selOS = 30 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 2 & ID = 82405 & O SID = 30 & driverLanguage = 42]

  You must also install all the other stuff to Win the Toshiba especially page 7 the VAP.

• Mouse and keyboard does not work after sleeping on a laptop

  After awakening from a sleep of my laptop, my keyboard and mouse went crazy, pushing buttons at random on the screen, beep and completely freeze then both. I restarted my computer and got to the login screen which I was able to type in, then he connected and the keyboard and mouse do not work. I plugged in a USB mouse and the mouse that works very well. After some playing around, I got the keyboard works by accessing the control panel and change the speed at which the keys type and for some reason, this fixes the keyboard. However, I am still unable to get the mouse works.

  So three questions, 1 - what happened in the first place? 2 - why my keyboard was working to connect, but not once it really connected? 3. How can I get my mouse back?
  Thank you!

  Hi NicoleWood,

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Hope this information is useful.

• Qosmio G30 - 161 - recovery disk does not work

  Hello world

  I need help to understand what happened with my laptop G30-161

  The last time I tried to reinstall the product recovery things was wrong.
  The time where computer supposed to install windows then a blue display screen and stops the process and I get a black screen where there are three choices: start windows normally, or with the command prompt or networking safe mode.
  When I tried safe mode: I get a message that windows is not yet installed!

  When choose ok then the windows install see the screed for a few seconds and then the blue screen appears and disappears a few seconds and the windows on the screen appears as if the system will be installed, and after a few seconds, I get the same - back screen with the choice of the tree again.

  I tried several times to use the product recovery disc and enter in the same circle.

  great wishes to you all

  Hello

  > I have tried several times to use the product recovery disc and I enter the same circle.
  Are you sure you have booted from the recovery disk?
  This seems strange to me that you get the back same screen (start windows normally, or with the command prompt or networking safe mode) when you start drive recovery.
  These three options are displayed only if the laptop would be started from HARD drive.
  So please try to boot from the CD again.
  Insert the CD, turn on the unit, press F12, choose ODD as a source of start-up and follow the instructions on the screen.

  If this is not possible, then I would recommend the HARD drive.
  I recommend Drive Fitness Test. This software freeware s (google).

  Perhaps something went wrong with the HARD drive.

• Tecra S1 keyboard does not work after sleep

  I started using an edition of comfort Office Microsft wireless as an external keyboard and mouse.

  When my Tecra s1 will switch to standby mode standard internal keyboard stops working. So, I can not enter the startup password.

  The external keyboard is listed as connected even when it is not.

  Any ideas?

  Hello

  Has this issue occurred until you used the external keyboard?
  My suggestion is the edition of Office Microsoft Wireless comfort has a bad influence on the internal keyboard.

• Mute does not work after sleep/hibernate in Windows Media Player

  I put Windows Media Player to mute. The little volume icon has the circle with the line through it.

  Volume cut appropriately.

  When I put my computer in hibernation and wake him up then again once the icon has yet the circle with the line through it, but DESPITE the volume being set to mute, he plays audio at full volume!

  I tried Windows Media Player in the mixer Volume of inhibition, but the 'secret' setting it seemed to return to reactivated after waking from hibernation.

  I ran to the resolution of the problems of audio playback, but he could not find any problems.

  Conducted a search for the update drivers but all drivers are up to date.

  My sound card is integrated "Realtek HD audio".

  Any ideas?

  Hello R,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. This issue has started happening recently?
  2. You did it of any significant changes to the computer before this problem?
  3. You get a related on Windows Media Player (WMP) error message when you wake the computer after hibernation?

  I appreciate your efforts to solve the problem and suggest you try the following methods to diagnose problems with the Windows Media Player (WMP) and check if they are useful.

  Method 1:

  Run the troubleshooter in Windows Media Player and check if that helps. This utility checks the configuration settings and network for Windows Media Player to ensure that you can play the content you downloaded and saved on your computer, or content streaming over a network or the Internet.

  Here are the steps to run the troubleshooting Windows Media Player settings Troubleshooter:

  a. press the Windows key + X , and then select Panel.
  (b) in the search box, type Troubleshooting , and then click on troubleshooting.
  c. click on show all and then click on settings of the Player Windows Media.

  If the problem persists, try the following method.

  Method 2:

  Try to run WMP on and off the media feature and check if the number is reproduced.

  1. Press the Windows key + X.
  2. Click programs and features.
  3. Click Windows turn on or off features.
  4. Extend the functionality of media.
  5. Clear the check box for Windows Media Player.
  6. Click Yes in the warning message.
  7. Reboot your system.
  8. Repeat steps 1 to 4.
  9. Check the box for Windows Media Player.
  10. Click Yes in the warning message.
  11. Reboot your system.

  Check if the problem persists now after the wake up the computer after hibernation.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• World of Blackberry blackBerry 10 does not work after 10.0.10.82

  My BlackBerry world (on my Z10) does not work after the update of 10.0.10.82.

  Did a complete reset to factory default, still unable to open the world of BlackBerry.

  However the device is able to receive applications when I send the request via the BBB web site by computer

  Got a solution form "ukmight".

  This is probably due to a problem with the app update. Workaround BB music should correct the having problem. Go to the music of BB. Press the three points and the world blackberry selet. Go to My World and them my Apps and check the updates. After that, the app world should operate normally.

  It's working now. Thank you.

• Wireless does not work after Windows Update

  Original title: Wi - Fi internet connection is DISABLED since yesterdays upgrade, how can I get that back on?

  Since a windows update yesterday, before closing my laptop... I am not able to access the Internet.

  My without wire is off and I can't turn it back on.  Toshiba wants $99 for technical support.

  Hi Sheryl,

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  Wireless does not work after a windows update.

  1. what day that was installed?

  You can check the update in the update history:

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  2. do you receive any error messages?

  3. What is the model of the computer?

  The problem may be with the drivers or with the device.

  I suggest that you refer to the procedure described in the site:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• ASUS touch EP - 121 does not work after Windows 8 Pro 64-bit install

  At ran Windows 8 Developer Preview and Preview of Windows 8 consumers on this ASUS Ep 121, Touch worked with pen and fingers, after that Windows 8 Pro 64 Bit OEM installation on 10/27 tap does not work.

  Reinstalled Windows 8 Pro 64 Bit OEM and touch works during the installation process, but not after initial start-up. Don't see the unknown devices in Device Manager.

  Update to the latest version of the ASUS BIOS dated 23/10/2012. Must be the driver problem or work around.

  At ran Windows 8 Developer Preview and Preview of Windows 8 consumers on this ASUS Ep 121, Touch worked with pen and fingers, after that Windows 8 Pro 64 Bit OEM installation on 10/27 tap does not work.

  Reinstalled Windows 8 Pro 64 Bit OEM and touch works during the installation process, but not after initial start-up. Don't see the unknown devices in Device Manager.

  Update to the latest version of the ASUS BIOS dated 23/10/2012. Must be the driver problem or work around.

  Hello

  Read the following article.

  Touchscreen does not work after the quick start on a computer that is running Windows 8 or Windows RT: http://support.microsoft.com/kb/2769287

  Read the article and then click on the button download software patch is available at the top of the article.

  Accept the license agreement.

  Follow the instructions to receive the fix.

  Concerning