Qosmio F30-127: copy from CD to CD using RecordNow

Similar Questions

• Qosmio F30-127 is unable to read the Vista upgrade disc

  Hi guys,.

  I have a Toshiba Qosmio F30 (127) with the standard front load Mat * a DVD-RAM (model UJ-846) Player.

  I have for months without any apparent problem burn a variety of CD DVD & (R/RW) and recently received my expected Vista Express Upgrade DVD which I assume adopts the format DVD RAM.

  After the upgrade of the BIOS to v3.4, I successfully installed upgrading startup, but only one of the hard drives (RAID) which has been recognized in my windows session (with the recoil, I would simply have used administrative tools > computer management > disk management) ;-(

  I reinstalled XP using the recovery disks provided original in preparation to retry the Vista upgrade a 2nd time to correct the alleged no recorded 2nd hard drive.

  However, on the startup of XP, the Vista Upgrade DVD doesn't have to be recognized at startup (i) or (ii) in the case of a Windows session, without a visible change in the drive icon to indicate the usual recognition.

  If I try to double click on the drive icon, I get the error message:

  "D:\ is not accessible. The request could not be performed because of an i/o device error.

  I have read a number of threads of support which advises: (i) changing some registry keys, which seem to be unnecessary following a procedure of recovering costs of system; (ii) the transfer mode to DMA to PIO on the primary IDE channel in Manager devices, and (iii) the offending disk and IDE/ATAPI controllers Device Manager uninstall followed by a restart of switching. I tried (ii) & (iii) independently several times resulting in Windows Installer automatically the drivers for the hardware newly found followed by a final reboot, but the Enigma DVD persists.

  I tried to install the latest drivers for the DVD RAM driver, including vF103 firmware update in the Toshiba download pages, but the status quo remains.

  Ideas or current symptoms are swinging more and more towards the likely hardware malfunction?

  Thanks for listening...

  For me, it looks like a hardware problem, maybe the lens of the player is not clean or not can not calibrate correctly in the right position

  But try first to remove the drive from Device Manager and restart the laptop.
  The operating system should recognize what it again automatically. If you want to read from this CD, and then try again.

  If she will not change the situation, then I presume that it s a failure of the equipment.

• I have to restart Qosmio F30-127 in order to recognize the inserted disks

  I have the Qosmio F30 127, which has the CARPET * A DVD RW. Very often, however, it does not recognize the fact that there is a disc in the drive. I have to restart for the DVD to recognize the inserted disc.

  If a disc is placed in the slot, shortly after starting it is correct until an attempt to use a different disk.
  This is a common problem or any other agency knows this and if so what is the fix?

  I put t think that it s a common problem.
  Always it is that readers do not each CD/DVD support and sometimes such disorders.
  Try to remove the drive from Device Manager and restart the laptop. After the reboot, the drive should be recognized again. Check if there is no change.
  Check that you have installed the firmware. Maybe a new available on the Toshiba page.

• Qosmio F30-127 abandoned but still on sale in stores, but not by Toshiba?

  Hi, does anyone know why the Qosmio F30-127 is deleted in the site Web of Toshiba but its still for sale at other retailers?

  I found for £679 pds but just wondering why?

  Rgds

  Why abandoned model?

  I found this device here on the Toshiba site and most online dealers offer this laptop for sale:
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?PRODUCT_ID=119392&service=UK&tab=3& toshibaShop = false

  As far as I know that the Qosmio F30 - 127 (PQF30E) was delivered to the United Kingdom.

• Qosmio F30-127: how to use the SD - no SD card reader icon

  Could someone how to use SD F30-127.
  I tried to get the image from my SD card.
  I inserted in the slot, but no drive ICON displayed

  Hmmm. Please check if the SD card has been recognized in the Device Manager.
  There should be no yellow exclamation!

  Another allusion;
  -Remove the SD card in the slot
  -Go to Device Manager and remove the SD card controller
  -Now reboot the laptop
  -After restarting again windows should recognize and install new hardware. It is a SD card controller.
  -Now, try to reinsert the SD card!

  By the way; have you used the format SD card?

• How to use my screen LCD of Qosmio F30 for play on the Playstation 2 using video and the port?

  I plugged my Playstation 2 to my laptop using the plug-in software component video port on the right side of my computer. Everything is in place, but how to move the LCD screen to display Playstation 2? Please instruct me. Thank you.

  Hey Buddy,

  Have you looked into the graphic properties of windows? These properties should be options that usually is activating your software component video plug-in, so you can use your PS2 with your laptop.

  And before I forget: you must use a program that is grabbing the video input and display it on your desktop as intervideo windvr or something similar, check if you have this program.

  Welcome them

• No audio connection Qosmio F30 to LCD TV

  Hi all - of course, it's a very basic question, but I am a novice. I'm trying to connect a F30 to a LCD TV. I can connect and get no video but I have no chance with audio. What is the best option to connect the F30 to a LCD TV to the audio and video? It is a HDMI cable? F30 does it take?

  Sorry, stupid questions, but I have no idea.

  Thank you.

  Hello

  You can connect to the laptop to the TV using the cable HDMI ONLY if both devices would be supported by the HDMI port.

  Can I ask you how you connect the Qosmio F30 TV? What cable did you use?

• Qosmio G20-127: very strange noise coming from HARD drive

  so...
  I have a problem with my "hdd2" I believe that I have a Qosmio G20-127
  It all started yesterday... and now it's like this (http://www.youtube.com/watch?v=D3Pzea1xMR8) this noise that makes me sic.

  Please help me and tell me what to do to get rid of him...

  Thank you.

  You sound queue is no longer available ;(
  But if you're 100% HARD drive makes any strange noises, then you must create a backup of HARD drive.
  Several months ago my HARD drive died and the day before I noticed some strange noises. Today, I know it's HDD ;(

• Qosmio F30-112 from an analog TV Tuner

  Hello
  I have 112 QOSMIO F-30.
  I can't watch TV DVB - T as in Slovkia has no signal.

  But there's also a tuner 'analog hybrid', this means that I can connect my Qosmio classic antenna/antena (analog TV) and watch air clasical hollow, or not? How is it?

  If I choose in the NERO 7 premium antenna Jack, he is not able to find any program. What should I do? My Qosmio is able to receive the analog signal?
  Please help, y at - it another useful software, except WMC?

  .. THX

  Hello

  AFAIK the Qosmio F30-112 supports a DVB-T/hybrid tuner and it should be possible to receive regular analog TV channels.
  You must connect the laptop to the antenna via a cable.

  The laptop has installed WinXP MCE, so you should use the media center to watch TV!

• Re: NTLDR and Qosmio f30-140

  Hello classmates

  Is my Toshiba Qosmio f30-140, it came with windows xp, but I installed windows 7 and it works very well for almost 2 years I have had the problem with the graphics card began as little green dots until the white screen and was on a year, so I tried to install the new windows 7.

  So I remove my main and attached to the other PC HARD drive and format the C partition and copied source windows in the C partition and HARD drive in wood as a first start and restart BUT I got NTLDR is missing press ctrl + alt + delete to restart

  * Notes *.

  1. I have problem in the graphics card because I installed windows 7. I got the yellow triangle on it in the Device Manager window.

  2 - my screen does not work, just up the qosmio for a second screen and disappear when I start it. If I use the external LCD.

  3 - I installed additional HDD (it has space for additional HARD disk).

  * I you have any Questions for you :*
  1 - How can I activate the laptop to boot from usb memory flash with source of windows 7

  2 - How can I install windows 7 NOOWW?

  Thank you and appreciate any help

  Canadian shark

  Hello

  > How can I activate the laptop to boot from usb memory flash with source of windows 7
  I think that's not the MAN of functions;
  I m not 100% sure, but I think that this BIOS does not support booting from SD card reader.
  But why you don t try to boot from the CD/DVD drive?

  If I understand your question, the external LCD is recognized correctly.
  Go into the BIOS and set the external monitor as the primary monitor.
  Then, you should be able to see everything.

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• Question of Qosmio F30 for TV tuner

  Hi, I'm Mike of Slovakia (central europe)...
  Is it possible to watch TV DVB - t program? or this signal is only for Qosmio G series?
  I have a driver on the CD: AVerTV v5.2.0.14 Slovakia Patch
  but during the instalation it shows me: ' WARNING: TV bad utility version!
  This driver is ORIGINAL TOSHIBA CD! NO COPY...
  and when I try to connect my Toshiba for the air gap 'normal' laptop antenna cable is able to find only three Hungarians (I am from the Slovakia) program im the very bad state too, when I connect this cable to the classic TV, I watch more than 30 programs...
  Where is the problem?

  I need driver for TV of Slovakia programs?
  Is possible that on the Slovakia, there does not exist a DVB - T signal?
  Is it possible to watch TV in high quality no matter where I am, with 'pocket' antenna connected to my laptop?

  Happy new year and thanks for your replies!
  : -)))

  The Qosmio F30 must be transmitted with the hybrid tuner TNT and it should be possible to receive digital signals if the digital signals are available in the country and region and the signal must be strong enough.
  I put t know if digital TV is available in your country of the region.
  You should check it yourself

  AVerTV v5.2.0.14 Slovakia Patch is unclear to me. AFAIK you can use ERM to receive digital television and update the TV tuner drivers are available on the Toshiba page

• Drivers of WIDCOMM 5.0.1.1200 Qosmio G20-127

  Is it possible to install software drivers Widcomm Bluetooth on Qosmio G20-127? I want to use them instead of Toshiba and Microsoft Bluetooth stacks. I modified the btwusb.inf file in Widcomm 5.0.1.1200 with my own PID and VID (taken from the Toshiba inf file) but I'm unable to install the drivers again.

  Hi Alex

  You will be very happy if someone can give you a correct and precise response to this topic. As you know Toshiba doesn't support and test some third part software.

• Qosmio F30-112: cooling fan runs very fast

  Hello

  I want someone ask them, my computer laptop qosmio F30 - 112 recently whenever I start my computer, I heard that the cooling fan runs very fast (I mean) it wasn't stop differently than before his execution smooth only I heard when I play games but not continuous, then after that my computer now running slow.

  Can someone help me what im going to do?

  Thanks: rtmasagca

  Hello

  F30 is a little older series laptop I think about 3 years or more... you cleaned the cooling modules in the meantime?
  I think there is a lot of dust and debris inside the laptop and I think that keeps air from traffic and therefore fans run faster.
  Try the compressed air jet that should help to remove dust and debris.

  Good luck

• Qosmio F30 - file missing or corrupt

  Please can someone help.
  Have a message from work Toshiba Qosmio F30 - 117 abruptly stopped in SafeMode it suggests following file missing or corrupt Windows\sytem32\config\system.
  Screen consists of thick blue & black lines with the projection of windows logon.

  Then you can only boot into safe mode gives above reading and turns off also suggests windows not EQUIPPED tried to recharge but is not possible. I know its old but its my friend suggestions have been people look £30 here £30 but no solutions only that it could be the hard drive get off and make £150, but it might not work.

  I'm of average intelligence old I could fix it by replaceing suggested parts of help please or thank you for suggested reading of John.

  Hello

  What operating system is currently installed?

  If Windows doesn't start over there is not much you can do and I recommend to reinstall Windows from the Toshiba recovery disc. Such a new and clean facility can help power Windows and the new installed Windows system will work also a bit faster and more stable if it s advisable to reinstall at any time (1-2 years).

  So take the Toshiba Recovery disk and follow the instructions on the screen to reinstall Windows.