Qosmio F30 - remote does not work after recovery

Similar Questions

• Remote does not work after upgrade to Windows 8

  After that I have improved my Revo Rl70 to Windows 8 the supplied remote control does not work with Windows Media Center or XBMC. No response to any button press on at all. LED on the remote flashes, but that's all. I tried to install the eHome device, but not luck. Also changed batteries in remote.

  Need help.

  Solved!  See another thread.

  http://community.Acer.com/T5/Acer-all-in-ones-desktops/how-do-you-get-the-Revo-70-remote-control-to-...

  Riad says:

  Had the same problem on the same hardware, found these posts was very angry and solved the problem.

  I am running Windows 8 Pro 64-bit - clean install (and not an upgrade) and same remote

  Here's how:

  1. Download "FIR_ITE_5.1.0.8_W7x86W7x64_A" from the Acer site

  (Select Windows 7 64-bit)

  http://global-download.Acer.com/GDFiles/driver/FIR/FIR_ITE_5.1.0.8_W7x86W7x64_A.zip?acerid=634614370...

  2 extract the downloaded ZIP file to your. Do not run the Setup program.

  Navigate to the folder... FIR_ITE_5.1.0.8_W7x86W7x64_A\FIR_ITE_5.1.0.8_W7x86 x64\INFDrv

  3. double-click on the reg file called "InstallRegistry.reg" to import the configuration. Be sure to meet all guests Yes OK

  4. restart your PC

  5. If should start working just after you log on, but you need to run the "CIRAP.exe" file that is located in the same folder that REG file it.

  Steps above should work if you the devices work correctly:

  Check open your device manager:

  The Panel\All Control Panel Items\Device Control Manager

  and make sure you have no exclamation point on some unknown devices

  You should also see two devices in the list under "Human Interface Devices"

  (SIO2) ITECIR infrared receiver

  and

  Microsoft eHome Infrared Transceiver

  It worked for me earlier so it should work for you too.

• driver Ricoh SD card reader does not work after recovery/vista

  Hello

  I have toshiba laptop with vista professional.

  I did the recovery on computer

  Once the recovery sd card reader does not work.

  Yes, I did:

  Downloaded latest driver ricoh xd card disk image

  installed

  restarted

  .. .but still does not work

  does anyone have a solution for this?

  Thank you, klemen

  You update your copy of Windows as directed by my last answer?

  I tried to download driver Toshiba but it seems that there are no downloads for Windows vista for your specific model.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Check the Device Manager for the entries in the card reader under "ATA/ATAPI IDE controllers" and "SD adapters.

  Double-click on the devices to see their properties. On the general tab, note their descriptions and 'device status'.  In the Details under "Ownership" tab select "hardware ID" note the entries under "value".

  You can try to install the drivers built into Windows Vista

  1. in the Device Manager, click on your PC
  2. click on the menu "Action" "Add legacy hardware. Click next in the Add Hardware Wizard.
  3. check the box before "install the hardware that I manually select from a list (Advanced)". Click Next.
  4. under "Types of common hardware", select "IDE ATA/ATAPI controllers '. Click Next.
  5. under "Manufacturer", select "Ricoh company.
  6. in the title of 'Model' select your description of the appliance as shown in Device Manager.
  7. the full wizard.

  There are several Ricoh xD-Picture Card controller, you can try them all and see one that works.

• HPE 500y: Wifi does not work after recovery

  I have a Hpe 500y with a card mother n-alvorix, I recently did a clean install and now I have no wifi
  When you try to install the driver of hp a ralink I get an error saying is not minimum required 9996
  I tried to look for the adapter mini by adding a fracture, but it does not find
  I also found what he sow there a 802.11 mini bag PCI
  Research through services, it seems to be there
  What is happening is that something is blocked
  The map shows it as a hp 3090
  He worked before clean install

  I imagined of is it tried to download the driver or do both, but u has failed to get the jury to access if as I sayed fo 30 dollars I can peak ausb wireless as a matter in fact I have a lynsnc but it of for mites Xperia windows try comparability n mode in any case thanks for the reply I'd send u a helping hand to the top , but I can't send you a so thanks cost just outside the way the need n this case

• Micro does not work after recovery please help

  After a virus in my computer, I did the recovery on my pc my dynamic microphone no longer works but the virus b4 it worked I tried everything to fix it and this is not possible and I just tested the microphone on my friends pc works very well I don't know where is the problem if someone can help im using windows xp...

  Did you try to increase the volume of the microphone you?

  Usually, HP recovery work out any software problem, have you chosen factory installation option?

  If the installation of the factory can solve your problem with the microphone, you may have a hardware problem.

• Qosmio F30 keyboard does not work properly

  I moved to Linux (Kubuntu) and have such a problem: my button "arrow down" spam itself. :| I tried Debian and Knoppix, but the result was the same.

  I posted it in this section because I think it has bug hardware, not Linux.

  I was able to stop spam with another arrow key. But when I changed some keyboard settings (numeric keypad options), he began to "pressing" down to ifinitly. :( Working with my laptop is impossible /: E

  How can I fix this stupid bug?

  Hello

  have you already tried to connect an external keyboard to the machine to check if you have the same problem?

  Otherwise, I guess that it s a hardware problem. So if you still have warranty on your machine you should contact a service partner for a checkup of hardware on your system.

  BTW. Here´s a link to a index of ASP (authorized service partner) If you want to bring your machine to repair:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?subs=TAIS

  Welcome them

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• CD/DVD drive does not work after 8 Win instalation

  Since a month since I've updated my windows in windows 8, everything works fine but the DVD - RW.

  When I put the blank cd and try to open it, it gives me error when opening by saying:
  "windows could not complete the format".

  Who's a software or a hardware problem?

  waiting for help!

  This means that your CD/DVD drive no longer works and is not recognized by the system?

  If Yes, then I would recommend checking this Toshiba document that I found on the portal of the knowledge base site:

  + Why my CD/DVD drive does not work after upgrade to Windows 8? +
  http://APS2.toshiba-tro.de/KB0/FAQ2B03F10002R01.htm

  You must uninstall the programs from Toshiba:
  TOSHIBA Recovery Media Creator
  TOSHIBA Disc Creator

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• Bootcamp does not work after disk utility

  Bootcamp windows 10 does not work after I have free space in disk utility

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 163,1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 87.0 GB disk0s4

  Mohans-MacBook-Pro: ~ mohanpagadala$

  Mohans-MacBook-Pro: ~ list of cs mohanpagadala$ diskutil

  No logical volume group CoreStorage found

  Mohans-MacBook-Pro: ~ mohanpagadala$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 318634168 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  319043808 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  320313344 169920512 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Mohans-MacBook-Pro: ~ mohanpagadala$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-318634168] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [319043808-1269536]

  4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [320313344-169920512]

  Mohans-MacBook-Pro: ~ mohanpagadala$

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.