Qosmio F50 - 10 k - multimedia keyboard and recovery disc creation

Similar Questions

• Question of size options and recovery disc creation.

  So, since buying my laptop ive put some games and other various programs on the C partition for a total of 18gigs of value. When I create my recovery disks it don't go to the special recovery partition and use only suggested 3 dvd + r or will also include tips on the c drive and go out in a bigger way?

  And another question when im done make the disc when I use them, they work exactly as how the Recovery Manager works when you pull up in windows from the recovery partition? I want to know this because when I use the Recovery Manager in windows from the partition it gives me a separate option to reinstall the drivers and additional programs (i.e.: suite dvd, youcam, norton) that came with the pc?

  I have never seen a recovery set take 8 DVD, but there is always a first guess. When you start the process of creation of recovery it will tell you how to can the disks are required. If you don't have enough, it will let you cancel until you get more.

  And Yes, I'm a girl.

• Recovery disc creation

  I have HP Pavilion dv5-1010et Entertainment Notebook PC. I entered Recovery Manager, you click on advanced, then selected Options create recovery disks and then press Next. Recovery Manager does not invite me to insert a blank CD, instead a dialog box appears with a red cross on the left saying "recovery disk was created. There is no CD or DVD inserted first Virgin. How to fix this problem? That hurt that I could not create recovery discs? I would appreciate help with this problem.

  @lauriej

  I'm sorry that you run also in this issue of recovery disc creation. You can also contact HP Technical Support at the 800.474.6836 to let them know that you have a problem, create the discs. As in the case of the CW4ZNS, the retailer may have created the disk but failed to give them.

  You can also create your own disc of Windows 8, however. Perhaps this is a faster option for you.

  Download the ISO of Windows 8 64-bit here

  ImgBurnto burn the ISO to a disc.

  If you need to use the drive, you will have to put the disc in, reboot and press F9 to the power of. Select your CD drive and start the installation. It will ask you the product key, and you can find that on the label of Microsft on the sides or the back of your computer. Once installation is complete, you will need to go to Your HP driver Page to download your drivers and software.

  I hope this helps! Let me know if you have any questions on this

• Pavilion dv6: recovery disc creation-help

  Hi all! I've a questione.and I hope that someone can help me. I would create a creation of... hp recovery disk recovery disk but when it gets in the first screen "Welcome to the recovery disc creation and I click on 'next'... and a call to error window with the Message that there is no free space in the partition of sistem.» But in the score system is only recovery... that ' s the solution for creatina a recovery disk? Thanks for the reply.

  Hey @Alessia_to,

  Before I provide documentation of troubleshooting, I would like to take a few minutes to welcome you to the community of Support HP, where you can ask questions, find solutions and get help from others in the community! I read your post and see that you need help creating recovery disks.

  Here is a document for you to read called create recovery discs or record a recovery Image on a USB Flash drive. I pulled some information in the document for you. The first thing that I would like to share with is only DVD-R, DVD-R DL, DVD + R or DVD + R DL disks are compatible with the design of recovery media program. The next disk types are not compatible with the design of recovery media program:

  • CDs

• Qosmio G10 and recovery disc - BSOD

  Hello

  I've had my G10 for a few years now and becomes very slow so I thought that I would like to re - install XP to get rid of all the waste.
  So I put the product recovery disc in and formatted the c drive and he did his thing and seemed to re - install ok

  When I rebooted, I get the Qosmio startup screen followed by a BSOD that is so fast that I can't read.

  I don't know what to do now?

  Any ideas would be appreciated

  Mike

  Hello Mike

  I understand you, but if you have a problem should not be the reason to write stuff not justified here.

  At, first check what is written on the grey top of this forum. This is the forum for users. This means no responses from Toshiba. So, I hope that we have clarified this now.

  Second your comment about recovery media works does not is also funny.
  How old is your Qosmio laptop?
  Do you use a recovery media for the first time?

  Is it possible that there is another reason for support of non-working recovery?
  Have you done the updates such as RAM or HARD drive?

• Wake up the Qosmio F50 - 10G system mode 'sleep' and boots account locked window

  Why when the laptop is put to sleep and left for a while, flashing light and stops when you press the power button / laptop will wake up showing the BIOS screen then boots in the window account locked?

  Why I get this is event viewer? Source ACPI
  The embedded controller (EC) data returned when none was requested.
  The BIOS may try to access the European Community without synchronization with the operating system.
  These data will be ignored. No further action is necessary; However, you should check with the manufacturer of your computer for an updated BIOS.

  When Windows 7 starts, the icons on the desktop, menu start and records are white then start then normal fill when seen once again, any reason why?

  I used Windows 7 drivers.

  Thank you

  Hey mate,

  I have too many Qosmio F50 and you can change the option if, after hibernate or stand-by the account should be locked or not. As far as I know that this can be changed in power management.

  About this window of Event Viewer, I never heard talk about this and my Qosmio F50 works fairly well with Windows 7. You have installed all the drivers for it? You have yellow exclamation marks in Device Manager?

  I also used Windows 7 drivers, but did you download from the Toshiba page? These drivers are pre-tested and normally should work pretty well.

• Laptop HP 15-f162dx: THEIR is NO OPTION of DVD FOR DVD RECOVERY DISC CREATION IN the HP RECOVERY MANAGER'S

  I HAVE HP 15-f162dx NOTEBOOK PC in WHICH I AM creating RECOVERY DVD DISCS IN "HP RECOVERY MANAGER", BUT in THE "HP - CREATE RECOVERY MEDIA" IS NO OPTION TO CREATE a DVD. EARLY CLAIM.

  CONCERNING

  Ok.

  I don't see that as a real issue or problem.  The ability to create a recovery media is part of the purchase, and you do not have the ability to create a recovery media.

  Why don't you use the option of USB flash drive?

  The USB stick recovery is higher on the recovery DVD disc in a number of ways.

  (1) a usb flash drive are not damaged by just scratching the surface, unlike the DVD in a set of recovery disks. A scratch on the side of disc label #1 and the whole is unusable.

  (2) a recovery, when from a usb flash drive takes less than an hour, so that once made with one set of recovery disks can take up to four hours.

  (3) not all DVD media can be used to create a reliable recovery DVD media.

  (4) DVD media can be easily destroyed by heat, if you live in a region of the world where the temperature is normally high.

  (5) usb recovery media creation takes less than an hour, compared to the time it would take to make a recovery of the DVD disc.

• Satellite L350-17Z: Question recovery disc creation - problem with calibration

  I'm eager to get win xp instead of vista current on Satellite L350-17Z because some soft is not stable and vulnerabilities, while under xp on the desktop computer, I had no problem. XP compatibility mode is not solve this problem.

  So I decided to do it in a cruel manner as a laptop is new and almost empty, not to mention the habit of hard drive xp. Still I tried to make a recovery, using TOSHIBA Recovery Disc Creator.

  Buta * during DVD burning there is a fault and message about some problems with the calibration. I tried a few discs - same result.

  Hi Snen,

  It would be interesting to know what CD/DVD drive you have. Maybe you should try to update the firmware of the drive. For some readers of Toshiba and Pioneer, the site shows an update of the firmware. It s worth a try!
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  And what kind of DVD that you use to create a recovery disk? I have good experience with the types of DVD - R and I use Verbatim.

• Satellite L350 - Question about recovery disc creation

  Help, please.

  I read in the manual for my new lap top before setting up and feel rather nervous.

  The seller said that he had to open automatically when I start it, and all I had to do to install the printer and my word m/s (for example) program and I would be in place and running.

  But it seems that I should first do some recovery disks.
  How many disks is necessary? DVD no doubt - or D/L.?
  The recovery discs are possible after other programs installed?

  Secondly, he mentioned the manual online. Where can I find it?
  I have a scanner and a Seagate external hard drive, but these can be added later.
  I use the laptop as a desktop replacement for my old Mesh PC of five years.

  Thank you for your help.

  Hello

  Yes, it is very important to create the recovery disk before you change anything on your HARD drive laptops.
  When you have completed the installation of Vista, you must start the application called recovery Toshiba disc Creator.
  This application will help you create the recovery disk.

  As I m not wrong not you would need a DVD. I recommend using a DVD-R.

  Notes; in some cases, you might get an error burning the recovery DVDs. This may happen because not all drives are fully compatible. So if you get this error please check different DVD from different manufacturers

  Good bye

• Laptop HP Envy, not allowing not recovery disc creation

  Get messages to create recovery discs.  When I try to do, it says created recovery on2/24/12 and only allowed recovery.  I think that HP sysstem sees recovery created on the HP Pavilion desktop computer.  Help!

  TomH1313 wrote:
  

  ... it says recovery created on2/24/12 and allowed recovery. ....

  Hello

  Yes, you can only create once and already done.

  Kind regards.

• Windows 7 recovery disc creation

  Does anyone know how much the recovery disc are? And is there a website I can download it for free?

  Hello Cameo,

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  I also like the fact that you want to create a recovery media for your computer.

  I suggest you to refer to this article and check if it helps.
  Reference:
  HP PC - creating recovery discs or record a recovery Image on a USB drive (Windows 7)
  http://support.HP.com/us-en/document/c01867124

  Important notes:
  User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Reformat a USB flash disk deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  I strongly recommend to back up all your important files and folders on an external storage device before

  any attempt of any type of system recovery, upgrading or repairing of BONE.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HP Probook 470 G1 recovery disc creation

  The company bought laptop Hp Probook 470 G1 E9Y79EA. We would like to do the recovery disks, but Recovery Manager is missing. Can someone help me?

  GORDIUS

  Hello:

  You can order HP recovery media by contacting HP for the country that you live in the link below.

  Call the phone number for business PC or use the chat feature.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If you are located in the USA/Canada, call this number... 1-800-334-5144.

  In the United States, if the PC is under warranty the recovery discs are normally sent free.

  You will need to provide the serial number of each PC you want a set of disks for.

• Qosmio F50 - 10Z - fan cycling on and outside, even when idle

  My f50 is constantly the fan turns and turns off every couple of minutes, even when the computer is idle and does not run applications.

  SpeedFan shows that the GPU is constantly cycling between 55 and 65 degrees C even if there are no applications running (for example just after the start)-the fan kicks in at age 65, died at 55, and then slowly warms up again. The noise of the fan is noticeable (I don't think it's going full speed, however), and it is a bit abrupt and boring happen constantly and is not normal behavior. Core 1 and 2 on Speedfan are cycles between 40 and 45 C

  Outside temperature is 20 degrees, so the environment is unlikely to be a factor. I blasted air fan for dust (as much as you can because the f50 is not built to be taken by a user to the home page), but even when the fan runs at the output seems visibly warm.

  I am only drivers of toshiba running on the site (currently 7.15.11.7590)

  My main concern is that this will negatively affect the life of the fan. Am I being too picky or is there something else I could do?

  Thanks for the tips

  Hello!

  It's not easy to say what's the reason of this problem, I so a few questions:
  Did you install the laptop with the recovery disk or Microsoft?
  What operating system do you use?

  First of all, you should try to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also, make sure that there is enough free space a tower the specifications that the air circulation is not blocked.

  I hope I could help a bit.

  Good bye

• Qosmio F50 - 10K - Microphone is weak and some generating noise

  Everything was ok with my microphone on F50, but recently, I noticed that it is defective. It is quite weak and producting some noise. No experience?

  Did you check the audio and settings in Realtek HD sound Manager?
  You can change the volume of the microphone see.

  In this program you have this problem? AFAIK in Skype, you can also change the settings for the microphone.

• Qosmio F50 - 10 k - Sound issues and want to install XP

  I work as a DJ and I use the computer a lot, but I have some problems whit him.

  First look, the first month when I have both him everything was ok, but when I installed alpha lexicon external sound card in Winamp, I have the distortion of the sound, but in virtual dj, I don't have these problems.

  Also I have a problem with secondary hard drive (320 GB), when I use virtual dj and want to play the song from a secondary hard disk - happens to this, the entire system and all its judgment in 2 seconds and then it begins to read the program.

  But for me more important question is, is it possible to install Windows XP on this computer, and where I can find the drivers and stuff necessary?
  Thank you

  Hello!

  It's not easy to say what the problem is.
  First of all, I would like to make a Winamp update if don t have the latest version.
  It could also be that it is not compatible with Winamp.

  The second problem I would like to defragment the HARD drive.
  And you have this problem with all players or special offers?

  Good bye