Pavilion dv6: recovery disc creation-help

Similar Questions

• Recovery disc creation

  I have HP Pavilion dv5-1010et Entertainment Notebook PC. I entered Recovery Manager, you click on advanced, then selected Options create recovery disks and then press Next. Recovery Manager does not invite me to insert a blank CD, instead a dialog box appears with a red cross on the left saying "recovery disk was created. There is no CD or DVD inserted first Virgin. How to fix this problem? That hurt that I could not create recovery discs? I would appreciate help with this problem.

  @lauriej

  I'm sorry that you run also in this issue of recovery disc creation. You can also contact HP Technical Support at the 800.474.6836 to let them know that you have a problem, create the discs. As in the case of the CW4ZNS, the retailer may have created the disk but failed to give them.

  You can also create your own disc of Windows 8, however. Perhaps this is a faster option for you.

  Download the ISO of Windows 8 64-bit here

  ImgBurnto burn the ISO to a disc.

  If you need to use the drive, you will have to put the disc in, reboot and press F9 to the power of. Select your CD drive and start the installation. It will ask you the product key, and you can find that on the label of Microsft on the sides or the back of your computer. Once installation is complete, you will need to go to Your HP driver Page to download your drivers and software.

  I hope this helps! Let me know if you have any questions on this

• HP Pavilion dv6: recovery disks ordered HP but recovery is a FAILURE...

  The hard drive failed on the laptop and I got a replacement after all operations of chkdsk drive, which has been formatted without problem in the initial recovery stage.  Classified into recovery disc for HP Pavilion dv6.  Insert the first disk and everything goes OK.  Load the 2nd disc and everything seems to be OK.  Load the 3rd disc (Supplemental) and everything seems to be OK.  Laptop restarts for the first time, starting Windows starts, starts the Software Installation section.  2nd restart start automatically then start Windows appears.  Additional CD is drive all the time.   The Recovery Manager window appears and indicates "recovery has failed.  Select one of the following buttons:...  Now, I save the log.  The log file is saved as. HP_SSRD_LOG SRD.

  --------------------------------------------------
  [17:47:22.78] enter audit OS Edition...
  ----------------------------------------
  [17:47:22.80] check RStone.ini file to determine the required edition.
  [17:47:22.83] out of checking OS Edition...
  --------------------------------------------------

  --------------------------------------------------
  [17:47:22.85] controls if the upgrade to Windows 7 is required.
  ----------------------------------------
  [17:47:22.86] current edition is [HomeBasic]...
  [17:47:22.86] [start] necessary. Don't need to upgrade...
  [17:47:22.88] [Starter] needed...
  [17:47:26.67] necessary [Starter] edition. But is not the case of the [Starter] OS...
  [17:47:26.67] OS edition upgrade might have a problem...

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  The current edition is:

  Current edition: HomeBasic
  The operation completed successfully.

  Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
  --------------------------------------------------------------
  Error: no OS flag not set on the device, please use EEPROM to set ~ OS SKU ~ value = 2
  [17:48:11.96] ------------------------------------------------------------------------------------------
  ...
  CTO error condition has been undergoing dtected [update Factory]! ***
  [17:48:11.96] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
  ...
  [17:48:11.97] ------------------------------------------------------------------------------------------

  [17:46:33.77] Start BBOffline.cmd...
  UPDrv = [C:]
  [17:46:33.80] value UIA 951 error Code
  [17:46:34.36] WinPE is 32-bit.
  [17:46:34.36] start [corrections].
  [17:46:34.39] ---------------------------------------------------------------------
  [17:46:34.39] FixUps.cmd...
  [17:46:34.39] create overall progress information...
  [17:46:35.75] complete FixUps.cmd...
  [17:46:35.75] ---------------------------------------------------------------------
  [17:46:35.75] start [Tweaks for SDRD].
  [17:46:35.77] ---------------------------------------------------------------------
  [17:46:35.77] SDRD Tweaks to change the regional settings default user...
  [17:46:35.77] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
  [17:46:35.89] Run "Dism.exe image:C:-/ Set-SKUIntlDefaults: en - U.S.-image: C:
  [17:46:42.32] ---------------------------------------------------------------------
  [17:46:42.33] start PININST.exe for offline...
  Housing starts [17:46:55.19] [Sleep 10 sec].
  Starting price [17:47:05.28] [creation RStoneFUpdate.INI].
  [17:47:15.00] start [create 1 GB Pagefile for offline].

  Volume in drive C has no label.
  Volume serial number is 4CE2-BE2D

  Directory of C:\system.sav\bbv

  12/26/2014 pagefile.sys 1 073 741 824 17:47
  1 file (s) 1 073 741 824 bytes
  0 44,734,984,192 dir bytes free
  [17:47:15.06] the mark detection.

  [17:47:15.30] ---------------------------------------------------------------------
  [17:47:55.53] Start SysID Check...
  [17:47:55.98] Start Option control code...
  SKU_DEF_COUNTRY = [244]
  SKU_DEF_SYS_LOC = [en]
  ------------------------------
  Reset the country in administrator...
  ------------------------------
  ------------------------------
  Reset the default user countries...
  ------------------------------
  ------------------------------
  System reset located
  ------------------------------

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  Statement of the international settings offline.

  By default system UI language: en-US
  Settings system locale: en-US
  Default time zone: Pacific standard time
  The settings for the default user regional: en-US
  Location: United States (GEOID = 244)
  Active keyboard (s): 0409:00000409
  Keyboard layered driver: PC / AT Enhanced Keyboard (101/102-Key)

  Installed the language (s): en-US
  Type: Fully localized language.

  The operation completed successfully.
  ------------------------------
  Updating the system locale info...
  ------------------------------
  [17:48:06.81] Start PIN Tweaks...
  [17:48:06.85] ---------------------------------------------------------------------
  [17:48:06.85] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] Tweaks to Unattend.xml of OOBE
  [17:48:06.85] to pick up the right file...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] rename unattend.org to unattend.or_
  [17:48:07.01] ----------------------------------------
  [17:48:07.01] without light sensor...
  [17:48:07.03] ----------------------------------------
  [17:48:07.04] it is restored by SDRD [SSRD.flg] image...
  [17:48:07.04] ---------------------------------------------------------------------
  [17:48:07.07] Start MIR Tweaks...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.12] [MIR Tweaks]...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.15] starting factory updates...
  [17:48:09.10] installation start QFE offline...
  [17:48:11.78] PININST_OFF: PAST...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\PININST_OFF. JOURNAL
  Result = PAST

  [17:48:11.86] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.88] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
  [17:48:11.88] FUList.log to check if there are double Desc...
  No duplication.
  [17:48:11.96] duplicated No. Desc is located... PAST.
  [17:48:11.96] there was no update from the factory...

  With all due respect this FYI is a user forum if we don't remember that. If you had problems and did not keep telling them something is wrong and also I and others here have no proof of your experiences. And since you threw the material person else or HP can help you now.

• Laptop HP Envy, not allowing not recovery disc creation

  Get messages to create recovery discs.  When I try to do, it says created recovery on2/24/12 and only allowed recovery.  I think that HP sysstem sees recovery created on the HP Pavilion desktop computer.  Help!

  TomH1313 wrote:
  

  ... it says recovery created on2/24/12 and allowed recovery. ....

  Hello

  Yes, you can only create once and already done.

  Kind regards.

• HP Wireless Assistant not working not not on my HP Pavilion dv6-3120se. Please help

  whenever I have restrat my laptop. HP Pavilion dv6-3120SE an error pops up for Assistant HP wireless you can help me.

  1. Click the Windows Start button and search box, type "recovery manager". Select Recovery Manager in the list, when it becomes available.
  2. Clicksoftware re-installation program and clickNo , and then follow the on-screen instructions to reinstall the desired software program which would include HP Wireless Assistant in the list.

  

• Laptop HP 15-f162dx: THEIR is NO OPTION of DVD FOR DVD RECOVERY DISC CREATION IN the HP RECOVERY MANAGER'S

  I HAVE HP 15-f162dx NOTEBOOK PC in WHICH I AM creating RECOVERY DVD DISCS IN "HP RECOVERY MANAGER", BUT in THE "HP - CREATE RECOVERY MEDIA" IS NO OPTION TO CREATE a DVD. EARLY CLAIM.

  CONCERNING

  Ok.

  I don't see that as a real issue or problem.  The ability to create a recovery media is part of the purchase, and you do not have the ability to create a recovery media.

  Why don't you use the option of USB flash drive?

  The USB stick recovery is higher on the recovery DVD disc in a number of ways.

  (1) a usb flash drive are not damaged by just scratching the surface, unlike the DVD in a set of recovery disks. A scratch on the side of disc label #1 and the whole is unusable.

  (2) a recovery, when from a usb flash drive takes less than an hour, so that once made with one set of recovery disks can take up to four hours.

  (3) not all DVD media can be used to create a reliable recovery DVD media.

  (4) DVD media can be easily destroyed by heat, if you live in a region of the world where the temperature is normally high.

  (5) usb recovery media creation takes less than an hour, compared to the time it would take to make a recovery of the DVD disc.

• Satellite L350 - Question about recovery disc creation

  Help, please.

  I read in the manual for my new lap top before setting up and feel rather nervous.

  The seller said that he had to open automatically when I start it, and all I had to do to install the printer and my word m/s (for example) program and I would be in place and running.

  But it seems that I should first do some recovery disks.
  How many disks is necessary? DVD no doubt - or D/L.?
  The recovery discs are possible after other programs installed?

  Secondly, he mentioned the manual online. Where can I find it?
  I have a scanner and a Seagate external hard drive, but these can be added later.
  I use the laptop as a desktop replacement for my old Mesh PC of five years.

  Thank you for your help.

  Hello

  Yes, it is very important to create the recovery disk before you change anything on your HARD drive laptops.
  When you have completed the installation of Vista, you must start the application called recovery Toshiba disc Creator.
  This application will help you create the recovery disk.

  As I m not wrong not you would need a DVD. I recommend using a DVD-R.

  Notes; in some cases, you might get an error burning the recovery DVDs. This may happen because not all drives are fully compatible. So if you get this error please check different DVD from different manufacturers

  Good bye

• Pavilion DV6 3000 Entertainmet: Need help to install an SSD for my laptop

  Hello everyone, I want to get a SSD for my notebook to use as first HDD and system C, so I can have a better communication and speed faster for the system (like rendering, export audio & video).
  I can do in my HP Pavilion DV6 3000 entertainment? What type of SSD can adapt to the system?
  Running on Windows 10 (recently updated), Intel i5 M520 @2.4 GHz, Ati Radeon 1 Gb HD, 4 GB DDR3 Ram... HARD DRIVE 320 GB

  I don't want to talk negatively about a manufacturer's product, but it is a fact that we saw a few compatibility issues raised here on the Forum about an old series of SSD Crucial, the MX which is not what you're asking about. I have used other than the MX series Crucial SSD successfully, but they are not my first choice. Crucial is a very reputable company and will remain fully behind their product. If they say it is compatible you aren't risking anything to try it.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Windows 7 recovery disc creation

  Does anyone know how much the recovery disc are? And is there a website I can download it for free?

  Hello Cameo,

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  I also like the fact that you want to create a recovery media for your computer.

  I suggest you to refer to this article and check if it helps.
  Reference:
  HP PC - creating recovery discs or record a recovery Image on a USB drive (Windows 7)
  http://support.HP.com/us-en/document/c01867124

  Important notes:
  User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Reformat a USB flash disk deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  I strongly recommend to back up all your important files and folders on an external storage device before

  any attempt of any type of system recovery, upgrading or repairing of BONE.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I deleted my hp pavilion dv6 headphones. can you help me to restore the capacity?

  Recently, my speakers went out on my HP Pavilion dv6 of Beats edition laptop.  I used my headphones since, and in a last attempt to restore my speakers (an attempt tragic dyi) I accidentally deleted my headset to my laptop capabilities.  Can you please tell me how to get the functionality I've lost.  I run on Windows 7 on my computer. Need help please, I rely on this computer to watch TV and movies while I'm in College.  And if there is a way to fix my computer speakers, that would be great as well.

  Thank you

  deis2016

  Well, you must make sure that the speakers are set as the default audio device. Try the following.

  1. Click Start, type 'Sound' and press ENTER. This will open the sound preferences window.
  2. Click on the speakers and the "set as default" button down.
  3. After you click OK, restart your computer.
  4. Display the result.

• HP Probook 470 G1 recovery disc creation

  The company bought laptop Hp Probook 470 G1 E9Y79EA. We would like to do the recovery disks, but Recovery Manager is missing. Can someone help me?

  GORDIUS

  Hello:

  You can order HP recovery media by contacting HP for the country that you live in the link below.

  Call the phone number for business PC or use the chat feature.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If you are located in the USA/Canada, call this number... 1-800-334-5144.

  In the United States, if the PC is under warranty the recovery discs are normally sent free.

  You will need to provide the serial number of each PC you want a set of disks for.

• Satellite L350-17Z: Question recovery disc creation - problem with calibration

  I'm eager to get win xp instead of vista current on Satellite L350-17Z because some soft is not stable and vulnerabilities, while under xp on the desktop computer, I had no problem. XP compatibility mode is not solve this problem.

  So I decided to do it in a cruel manner as a laptop is new and almost empty, not to mention the habit of hard drive xp. Still I tried to make a recovery, using TOSHIBA Recovery Disc Creator.

  Buta * during DVD burning there is a fault and message about some problems with the calibration. I tried a few discs - same result.

  Hi Snen,

  It would be interesting to know what CD/DVD drive you have. Maybe you should try to update the firmware of the drive. For some readers of Toshiba and Pioneer, the site shows an update of the firmware. It s worth a try!
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  And what kind of DVD that you use to create a recovery disk? I have good experience with the types of DVD - R and I use Verbatim.

• HP recovery disc creation error

  I just bought a new HP Pavilion dv7-3085dx and a, m, trying to create such recovery as recommended by the system disks.

  Have tried to use DVD + R and DVD - R (Memorex brand) to complete this process.

  The program returns, checks the disk I insert and tells me what I have and will take 3 discs to complete the course.

  It then seems to create disc number 1.

  However the outcome of the said, then he says is check the disc and then after 5 minutes one sets up an error message.

  "An error occurred during the creation of the disc.  Try a new disc or choose a brand of different quality of the disc and make sure that all applications are closed. »

  This has happened on both DVD + R and DVD-R discs.

  However, I can see in windows Explorer that the disk has been created and there files it contains.

  Y at - it a program update or something I am doing wrong.

  I saw where this problem occurred with another laptop users and that there was an update for their particular system.  I checked the drivers and downloads for my particular system and there is nothing new here.

  Any help would be really appreciated.

  Thank you, Merry Christmas and have a great day.

  Mardy in North Carolina

  Cheryl,

  WOW!  I got a never thunk... but you were right.

  Sony DVD worked like a charm.  Memorex sucked.

  I apologize for any bad feeling I have posted.  I don't think that it was possible. I'm wrong and bow to the Queen.

  Thanks for the tips and I hope you had a great Christmas.

  Talk to ya next year.

• HP Recovery Disc creation program

  Hello

  Re: Pavilion P6516f-b Windows 7 Home Premium 64-bit

  Recently, when prompted, I started the process of a recovery of three-disc set. a 1 went smoothly. 2nd drive in and immediately pop up says impossible to use the drive, insert a new one, I did. But, then for the HP Recovery software me the notified in a pop up that discs 1 & 2 have been created successfully and move on to disk 3. Disc 2 has NOT been created. If this process of creation of recovery disks can be made once and only once, how do I get the HP software to create the second disc? I did not continue to drive three because of this concern.

  I've slogged in hundreds of patch download lists and, frankly, am not knowledgeable enough to choose something that could be the answer.

  Thank you, in advance, for ANY info.

  Mrs. Jetson

  Hello

  I would contact HP using the phone number that is on the link corresponding below and explain that the Recovery Media Creator is unable to create a viable set of recovery disks and ask them to send you a set of free replacement of these discs.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• HP P6674Y: Had to reformat the hard drive HP Pavilion the recovery disc sending the error message

  After reformatting the Original HP Pavilion drive I got the recovery disk, but I keep geeting a message

  If you receive this message on a hp PAvillion call HP support

  Hello

  HP has an official presence on this forum other than for administration and moderation. The help you receive is mainly by volunteers.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.