Qosmio F50-10B and nvidia geforce 9700 m gts drivers

Similar Questions

• To install XP - PRO on Qosmio X 300 - N12 _ (Mobile DualCore Intel Core 2 Duo P8400, 2266 MHz, Toshiba, Intel Cantiga PM45 Chipset, NVIDIA GeForce 9700 M GTS.

  Hello!

  He want to install XP PRO on Toshiba Qosmio . I myself ghat PC with Vista, but I don't like her and have compatibility problems. BUT IMPOSSIBLE TO INSTALL XP. BLUE SCREEN .

  Of course, I used the "Intel Matrix Storage Manager driver", iaStor.sys... with a floppy disk and so on.

  It seems that it is subsequently the appairs BLUE SCREEN ?

  I'm going crazy...

  I have BOTH legal and personal versions:
  1) an ordinary retail XP - PRO
  2) the CENTER XP restore disc, coming from the previous laptot TOSHIBA, I had and that DEAD (100% dead!)

  Nothing will!

  Thanks for the help!
  Michel

  Disable the ACHI SATA controller in the bios. I had the same problem on XP on a Dell Studio 1737. As soon as I disabled ACHI it ran fine.

• Perhaps a mistake: Qosmio F50 - 10K with nvidia 9600?

  Perhaps a mistake: Qosmio F50 - 10K with nvidia 9600?

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=1055757

  Is the graphics engine NVIDIA GeForce 9700 M GTS model Qosmio F50 - 10K? like here:

  http://explore.Toshiba.com/laptops/Qosmio/F50/F55-Q503

  Sorry for my English, I m of Spain

  Hello
  Toshiba Qosmio F50 sold in europe and just like that: -.

  Qosmio F50-10 b: GeForce 9700M GTS GDDR3
  Qosmio F50 - 10K: {color: #ff0000} GeForce 9600 M GT GDDR2
  {color} Qosmio F50-108: GeForce 9700M GTS GDDR3
  Qosmio F50 - 10G: GeForce 9700M GTS GDDR3

  and Toshiba Qosmio F55 sold in the United States just like that: -.

  Qosmio F55-Q502: GeForce 9700M GTS GDDR3
  Qosmio F55-Q503: GeForce 9700M GTS GDDR3

  F50 for europe only, F55 for U.S. only

  I hope this will help

  Kind regards
  Reaver

• Drivers XP Qosmio F50-10B

  Salam everyone :D

  I am looking for my new laptop Qosmio F50 - 10B for the drivers of Windows XP Home edition. Have not found the drivers online...
  Will I just get off on my risks or do you think that they will soon offer him?

  How can I get the drivers from Toshiba? Is there some process... ?

  I have software that runs very slowly on Vista... So I need to downgrade... :-(

  Any help is appreciate it...

  Thank you
  Buthaina

  Salam my friend

  Without a lot of philosophy: of course the drivers are not available. Not yet. Maybe Toshiba will offer them in the future. Who knows? You can experiment and install Windows XP Home edition on the second partition or second HARD disk (if available).

  Check Vista what hardware your Qosmio and try to find some goggling autour tem. If you need to run some some software you n t need to hardware of base without all Toshiba tools and configuration utility.

  For running multimedia commands, you can continue to use preinstalled Vista.

• Qosmio G10-133: where to find NVIDIA GeForce FX Go6600 Vista drivers

  I have a Qosmio G10-133 with the motherboard upgrade which I believe has the Nvidia GeForce FX graphics chip Go6600, not the old motherboard which had the chip 5900.
  I'm trying to find a recommended driver for this chip when using Vista as an operating system.
  I know that Toshiba is no longer supported this discontued model and certainly do not have the drivers on their website.

  Anyone got any ideas where I can get a suitable driver, or even if there is a.
  Site Web de NVIDIA simply States that the computer manufacturers portable invidiual adapt drivers for their chips and do not provide a driver.

  Any ideas?

  My understanding of the Toshiba doesn't support Vista drivers for the Qosmio G10 The Vista seems to be supported since the Qosmio G30 series

  I read several threads on the compatible graphics driver for Vista OS and Web site _ www.laptopvideo2go.com _ provides some nVidia drivers.

  But note; These drivers are not tested and so you can install and use at your own risk

  Best regards

• Qosmio F50 - keyboard and mouse USB disconnects for 2-3 sec

  Hello

  Well use a keyboard and a USB mouse to play games on it

  Somehow my mouse is "Razer Lachesis keyboard is 'Razer Lycosa' and I just installed the latest drivers for them."

  The problem is that my keyboard disconnects sometimes for 2-3 sec then am playing, but the mouse sometimes move slowly and don t answer correctly for the same duration 2-3 sec. I've tried everything updated and I went on Google and I didn t find something that can help

  In any case use windows Vista 32 - bit with latest updates and I didn't change the original Vista provided with my Qosmio F50 t.

  I hope you can help

  Hello

  Have you noticed intensively the HARD disk activity when this happens?
  East - the HDD LED flashes when the mouse or keyboard do not respond?

• Qosmio F20: I need NVIDIA GeForce Go 6600 for Vista driver

  I need NVIDIA GEFORCE Go 6600 for windows vista driver. But when I try to put the old driver he know that the driver, but windows vista does not support.
  Thank you all answer me.

  Hello

  Unfortunately, it seems that you will not be able to use the Vista me TV tuner!
  The Toshiba didn't publish all drivers vista for this unit and it seems that the drivers will not be published especially for this device ;(

  Maybe you will test the graphics driver from another source

• Enable GPU and Nvidia Geforce 730 Ray tracing

  Bought this gpu (2 GB DDR5 Vram) of MSI GeForce N730K-2GD5LP/OCV1 (MSI Global).

  Put in touch with the adobe wish form support center but don't have no answer yet!

  Before you buy this card, I searched a lot and found somewhere on the system requirements for after effects CC 2014. It says any Nvidia Geforce 6 * 7 * supports after effects CC 2014.

  Now, here, I've not seen any post is linked with the card Nvidia GT 730 or found it in the condition list!

  I need to know if this card supports or not?

  What should I do now?

  Help me as soon as possible...

  First of all, why do you want to use the ray-traced rendering engine? It is considered to be obsolete. It was a crappy way to do 3d in After Effects. And, if you do not use it to create the geometry of 3d in AE, it slowed just all way down.

  If you want to do 3d in AE work, use the new and more powerful 3d solution that comes with AE or use a third-party plugin like 3-d element Zaxwerks Invigorator, courage, etc. - GPU needs ShapeShifter have nothing to do with the requirements of the renderer traced to the RADIUS. I'm sure that all three of them can use your GPU, but check the requirements before you buy anything.

  Now, if you want to continue to use the old ray-traced rendering engine, this is the page with the requirements for the ray-traced rendering engine: after effects configuration required for Mac OS and Windows

  Nowhere does N cards or GT (except one: GT 650 M). All cards are cards GTX or Quadro. Now, in AE CC 2014 and versions later, you can check the box to use unsupported cards in order to expedite the ray-traced rendering engine, so you can try it.

• Yosemite 10.10.1, After Effects and NVIDIA GeForce GTX 680MX 2048 MB is no longer compatible?

  Hello

  I recently updated my iMac 2012 end of Maverick in Yosemite 10.10.1. The main function of the system is the graphic and video production using Adobe 2014 Creative Cloud application suite. It is equipped with a CUDA GPU of NVIDIA GeForce GTX 680MX 2048 MB.

  Adobe applications Yosemite before authorized update BOF CUDA accelerated makes. After the update to OS that it is no longer an option that I realized when I open an After Effects project and was informed that ray-tracing was more accessible and requires CUDA 5.0 or later.

  This led me to download and try to update the correct GPU GeForce driver, which I believe this here:http://www.geforce.com/drivers/results/81212

  I downloaded and opened the package to start the installation and immediately received this message:

  "Not supported by the computer. This computer is not compatible with the NVIDIA of the web driver. »

  The platform OS Yosemite is incompatible with my GPU now? The operating system and GPU were previously in harmony. The accelerated rendering of CUDA is critical to my work. If possible, can I go back to Maverick?

  
  Everyone knows about this problem? Am I just tried installing the wrong driver of GPU?

  Thanks for your suggestions or leads.

  I was looking for ot install and update the driver incorrect. I had updates to the CUDA Panel: http://www.nvidia.com/object/macosx-...37-driver.html.

• Photoshop CS5 and NVIDIA GeForce GTX 295 Crash

  My profile:

  Photoshop CS5 (x 64)

  Windows 7 x 64

  NVIDIA GeForce GTX 295 (latest driver v197.45)

  Intel i7 920 2.67 GHz

  My card is listed as tested for CS5 and NVIDIA card says that it's compatible with CS5, but today after using it, my screen went blank and the display driver recovered himself. It took about 5 minutes until Photoshop CS5 became responsive and the GPU features have been disabled. I will try GPU in advanced mode and basic instead of the normal mode to see what happens, but it's a shame that I have problems of this kind. I also had problems with CS4 like that.

  What I did to cause this problem: "I clicked on" Place... "to place an object, and that's when it crashed. It happens randomly that I use Photoshop. Please NVIDIA or Adobe to solve this problem. I love the GPU features and I want to run them, but this crash is boring to spend as much on the purchase of this product. I hate to have to pay to contact Adobe technical support, it should be included with the purchase of the software!

  How do I fix this without having to go through the mode based GPU or disabled GPU?

  Well my crash started back with the latest drivers again with the registry tweak and even disabled completely OpenGL. I was going to start to use Gimp but decided to make one last search and then found this thread: http://forums.nvidia.com/index.php?showtopic=179747&st=20

  Holy cow, thanks to this thread, I solved the problem! This idea of downclocking the card itself and other questions related power led me to this fix: go to the NVIDIA Control Panel--> manage settings 3D--> global settings and opt for 'Power Management Mode' 'Prefer Maximum Performance' (the 'Adaptive' default setting value seemed to be the culprit). And that's all! The key here is change the setting of "Global", as my individual programs were already set to 'Prefer Maximum Performance'. I have worked very well for 3 days now, and I can cause the error to happen again by changing to "Adaptive".

  I do that and then turned backon OpenGL and set it to 'normal' and so far I've not dropped yet. For all of you who read this, I'll update if I have everything longer blocks, so if there is no more info about me which means this fix has remained strong.

• XPS Intel HD 4600 Graphics and Nvidia Geforce GT 750 2720 m

  Hello

  For about 3 weeks and a few updates to the Windows and Nvidia driver in may 2015, it seems that the Nvidia graphic card is no longer used by the Dell PC XPS 2720.

  I tried to just reinstall the drivers of two first from the website of dell and alternately of each Web site from intel and Nvidia.

  The two cards are included in the device (Device Manager) Manager, but each time, the graphics card intel HD is the only graphics cards that really works and used by the PC for an application or a game.

  I can check with software such as speed of the fan or CPUID, CPUID HW Monitor.

  Similarly, if I forced systematically into the control panel NVIDIA, the Nvidia card for the global or individual parameter, the Nvidia card is not used.

  Normally the Nvidia should be better for 3D application or games.

  Comments, solutions or justifications will be very appreciated.

  Thank you and best regards,

  PS: I have read all the previous posts on the subject and I know that the two graphics cards usually work together and have been in the past subject to a number of positions or problems related to their 'recognition' by the PC. I have Windows 8.1.

  Hello

  Thanks for sharing the solution. If you have questions in the future to write us, we will be happy to help you.

  Sincere greetings,

• Problem NVIDIA GeForce 820 M installation drivers for Windows 7 64 - bit for HP 15 - r022TX

  I recently bought a HP laptop 15-022TX (with NVIDIA GeForce 820 M card) from Flipkart. I installed Windows 7 Pro 64 - bit of DreamSpark and downloaded the driver for the card from here.
  Now when I run the Setup, it gives the following error:

  

  I walked to the Intel Download Center and use the Intel® driver update utility. But it seems that Internet Explorer crashes whenever I start the utility (tried with Windows 7 Pro 32/64 - bit, Windows 64-bit Pro 8.1).

  Now I wanted to determine my Intel graphics driver so here is the output of 'Right click on the desktop'-> 'Screen Resolution'-> advanced settings.

  

  So, how do I know which driver to download from the Intel Download Center? In "Find by category," I looked in "Graphics"-> "Laptop drivers graphic", but none of the drivers listed seems to help.

  PS - Ironically, I could find help to install the driver for Ubuntu much faster.

  Any help would be appreciated!

  Thank you DerekQ and Paul_Tikkanen for the suggestions. But it seems that I solved my problem. I downloaded SlimDrivers free from download.com and let it scan my laptop. It automatically detected the obsolete VGA driver and downloaded and installed the appropriate Intel HD graphics card driver.

  in any case thank you for your support!

• Problems with nvidia geforce 8600 m GT / drivers

  I have some problems with my nvidia geforce 8600 m GT on my Dell Vostro 1700.

  It seems that the drivers a few crash games, and I found that a lot of people have the same problem, but I can't get a soluction.

  I can also update my drivers (mine are 7.15.11.5669 4/10/07, Winsdows Vista Business): update on windows tools cannot find a newer driver and the ones I found on the nvidia site does not work (they give a message that say 'impossible to find adequate material for these drivers').

  Thank you for helping,

  Betray

  
  

• BIOS update failed on Acer Aspire V3 - 772g wth core 5 Intel and Nvidia Geforce GT 750 M

  Hello

  because twice the problems encountered during the 2 major upgrade of my windows 10 family last week and 6 months ago I decided to check my Bios.

  Then I ran Windows 10 Familly and downloaded the BIOS_Acer_1.13_A_A.exe file from the ACER support site.

  My data is backed up. So no question about it.

  I've run this file and the PC has restarted.

  Surprised but horrible, now I get these messages in the following order:

  

  

  

  Welcome to help me. I don't know how to get back on the bios to factory?

  I don't know what to do?

  Good day.

  Henri

  Boot to the BIOS by pressing F2, and then press F9 and F10.

  Check if you are able to start Windows 10.

  If it isn't

  Enter the BIOS again by pressing F2 and go to the Startup tab, check if a the Legacy value, if so switch to UEFI, press F10 and reboot.

• Qosmio F50-108 - is the temperatur for 9700M GTS ok?

  Hello!
  I have a guestion temperatures on this GPU. My computer turns off twice while he was playing so I decided to take a look at the CPU and GPU temperatures. SpeedFan show that the CPU at rest is 54 and 56 for the Core 1 and 2 and 98 degrees for the GPU. What is the normal temperature of dor this map or should I worry?

  Thanks for the replies.

  Can you post what laptop Qosmio you have?

  In addition, I would try to clean the laptop with a jet of compressed air. You can buy this with a computer dealer and this could blow the dust from the cooling fans.

  I think that the temperature is too high because the laptop stops himself.
  Do you use the dirver Toshiba or nVidia?