Qosmio F50 - keyboard and mouse USB disconnects for 2-3 sec

Similar Questions

• Keyboard and mouse USB freeze after sleep

  Hello

  every time my pc from sleep, I wake up the keyboard and mouse freeze and stop working. They only way to do their job is unpluging and pluging the usb cables. I use windows vista 64 - bit SP2, rx250 mouse logitech and microsoft keyboard comfort 2000. The drivers and software are later. (Downloaded from the site Web from Microsoft and Logitech).

  All the solutions for that?

  Thank you!

  Hey guys, I solved the problem with the mouse.  I have the keyboard and mouse plugged into the back.  Initially, I had the mouse and keyboard connected, in this configuration to include only the mouse was frozen.  I went there where their vertical connected to each other, that is to say the keyboard on top of the mouse on background.  that resolved the =)

• Connection keyboard and mouse USB Wired stall

  Hello

  My computer repeatedly interrupts the connection to my Wired USB mouse and keyboard.  Usually around one every 30 seconds, the connection falls for 1 to 1.5 seconds, then comes back.  Meanwhile, the cursor hangs - I can't click anything, and I can't press any keys on the keyboard.  For example - when I type, I have my keyboard will stop working for a while, and no text will appear.  This is particularly problematic when I play games.

  I tried to reboot the computer, reset the SMC and the mouse and keyboard.  I also tried all USB entries on my mac (4 in total), and the problem persisted with each of them.  This leads me to believe that it is either a problem with all the USB inputs, or a software problem.

  I have an iMac 27 inches, mid-2011 with OS X El Capitan 10.11.6 (specifications: 3.4 GHz Intel Core i7 processor, 16 GB with 1333 MHz DDR3 memory and storage capacity of 2 TB).

  I use a wired USB (Logitech G402) mouse and keyboard USB Wired (Razer BlackWidow Stealth).  I have the latest version of Logitech Gaming Software and Razer Synapse installed for support.

  I would appreciate help.

  Check if there are updates available driver.

  To check if the problem is with the USB to your Mac controller, test with a different keyboard or mouse.

  To check the extensions conflicts, etc., try the startup mode.

  -----

  Restart in Safe Boot mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• Windows 7 - USB keyboard and mouse do not work once Windows starts

  The following happens occasionally:

  The keyboard works perfectly in the BIOS, the post OFFICE and when the Windows 7/64 Ultimate starts (I can tell the [Numlock] led shines). But when you see the Windows login screen, both, USB keyboard, USB mouse and stop working.

  I can say this from the [Numlock] LEDS go off and, mouse and keyboard, does not.

  There is no discernible specific deadline. Even wait minutes does not get the mouse or the keyboard back from work. In this case, the only way to get both mouse and keyboard, back from work is to reset the machine.

  I noticed this strange behavior with several keyboards, mice and different motherboards. So, it doesn't seem to be a problem related to a particular device.

  Independent since I also noticed the following:

  • I am currently using a card mother GIGABYTE Z68XP-UD3-iSSD. If I activate XDR (caching system with the small SSD disk) then Windows 7 starts up very quickly but keyboard and mouse get disabled for about 5 seconds when the login screen appears.
    .
  • During the installation of Windows, the keyboard rarely has not activate during the POST at all.

  I noticed that several people share the same problem. Is this an inherent problem USB HID? Or is there a bug in Windows that should be fixed?

  Hello

  This might be a question of power, where Windows is shutting off the power to your USB ports. Try this:

  Open the Device Manager
  Click on the tree "Universal Serial Bus".
  For each "USB root hub" do the following-
  Right-click on 'USB hub root'
  Select Properties
  Click the power management tab
  Make sure that the box "Allow the computer to turn this device to save power" is NOT checked.

  Try restarting now. If all goes well, that will take care of the issue.

• Keyboard and mouse not recognized

  HP Pavilion P6620f Win 7 when I first starts the job of keyboard and mouse (for access to the bios, etc.), but as soon as Windows starts and my login screen the keyboard and the mouse do not work.  There is being able to go to both because they have lights lite on each.  I tried unplugging everything, including the power cord, and I removed the motherboard battery to try to reset it.  Nothing seems to work.

  Hello

  I want to say that you don't have to disconnect the keyboard and mouse USB while trying this process. Once you have removed the USB drivers, the computer would have to re - discover the keyboard and mouse as a new device that may have circumvented the problem. So I read your reply message and it seems that you are unable to use your mouse and keyboard in safe mode. This is due to a problem of driver at this point. So there are only a few options left at this point in time:

  1.) Perform a repair windows (not a reinstallation of the operating system), so that you can verify the integrity of your system drivers. At startup, you need to press F10, F11 or F12 to get into the system recovery.

  Repair automatic running of the recovery disk is easy. After your system starts on the recovery disk and you follow the troubleshooting | Path via the menu advanced options, you will see the screen shown in Figure Aadvanced. Among the tools available on the screen advanced options, you will see the auto repair.

  Figure a. Advanced screen, you will find four other tools that you can use to recover a damaged Windows System.

  When you select the automatic repair option, you will see the screen shown in Figure B.

  Figure B your first line of defense when it comes to recover a Windows 8 system is the automatic repair option.

  Once you launch the automatic repair, it will begin to diagnose the problem to start and you will see the screen shown in Figure C.

  Figure C in the first stage of its operation, the automatic repair will diagnose the problem.

  During this diagnostic phase, automatic repair will scan your system and analyze the different parameters of the configuration options and files system searching files corrupt or botched configuration settings. Specifically, automatic repair will look for the following issues:

  • Missing/corrupt/incompatible drivers
  • Missing/corrupted system files
  • Missing/corrupt boot configuration parameters
  • Corrupt registry settings
  • Metadata for corrupted disk (master boot record, boot sector or partition table)
  • Installation of the problematic update

  If it detects one of these types of problems, it will automatically attempt to correct them, as shown in Figure D.

  Figure D auto repair has a diagnosis of your problem starting, it will attempt to fix it.

  If the AutoFix can solve the problem, she will do without any intervention. It will then reboot the system and start normally.

  2.) backup your important data and restore complete system of the operating system.

  If you have any further questions please send me a message.

  >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

  > Please click on Bravo, if this information was helpful >

  >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

• Bluetooth keyboard and mouse Lag

  MacBook Pro retina end of 2013

  OS X El Capitan 10.11.4

  I have finally upgraded to El Capitan in Yosemite. I never had any problems with my keyboard and mouse before. However, immediately after the upgrade I experienced lag/stutter my Magic Mouse. In addition, my keyboard is sometimes unusable. I hit the SPACEBAR and my computer will insert 5 +. I'll hit back and it will delete entire words/lines.

  I tried...

  1. restart the computer.
  2. bluetooth disconnection/connection
  3. keyboard and mouse of disconnection/connection
  4. Remove and repair the keyboard and mouse
  5. restart the computer several times :-)

  Nothing seems to work. Any ideas/suggestions?

  Article Apple > If your Apple wireless mouse, keyboard or the trackpad will not work as expected - Apple Support

  I is not correlate your measurements with those of article-, but from scratch, as if the devices were NEW seem logical

• Keyboard and mouse hangs often.

  Thank you for your time.

  I was faced with a problem with my mouse and keyboard. It's mostly the mouse, but it happens that the keyboard is affected. Basically, weather it's game or just browsing, the mouse would stop working for a second, then making noise he might do if I plugged it in, then start working again. This could happen very occasionally or once a day. Sometimes, the keyboard and mouse stop working for good. So I have to press the off button on my tower to put in mode 'sleep'. Which temporarily solves the problem.

  The only thing that I can associate this problem with is buy Borderlands 2 on Steam. In other words, this is the first time, I had this problem. It's probably a coincidence, but if it has something to do with it, it would be good to know. I was told to update my BIOS, but my father (I'm 15) tells me it is not a good idea because something can go wrong, and totally riun my machine.

  My specs are:

  Product number: QW729AA #ABA (I don't know the exact name of my computer, but it says HP Pavilion on it.)

  Windows 7 64 bit

  No real error message

  The change was that I noticed the problem around me buy Borderlands 2

  Once again, thank you for your time to help me with this problem.

  I think that I fixed it.

  It was the mouse itself, because I spent my mouse with another and the poor functioning of the mouse didn't work on the other computer.

  I just mark as resolved or you guys can I do if I can't

  Thank you

• Win 10 VMware® Workstation 12 Pro upgrade to 12.0.1 or 12.1.0 keyboard and mouse freeze

  Win 10, 64-bit (Build 10586) 10.0.10586, VMware® Workstation 12.0.0 Pro all right.

  If I update to VMware® Workstation 12.0.1 or now VMware® Workstation 12.1.0

  and restart the system 10 Windows, the keyboard and the mouse freezes.

  There is no way to have a system that responded to the questionnaire.

  The Start button / stop and restore to you last saved Point is the only solution to support the system.

  Someone has a similar problem?

  Win 10, 64-bit (Build 10586)

  VMware® Workstation 12.0.0

  K270 keyboard and mouse USB Logitech M185

  Best regards

  Franz

  New mouse-keyboard combination with Bluetooth adapter and all is fine now.

  Franz

• Uninstall the usb keyboard and mouse

  I am swapping a USB keyboard and a USB mouse for a combo keyboard and mouse Logitech MK360 wireless on my Dell Optiplex gx620 desktop (Windows 7).  Do I pull up the Device Manager, go to the properties for the keyboard and the mouse and click on uninstall BEFORE or after HAVING physically remove connectors USB keyboard and mouse to the USB ports on the Office?  Should I use before removing connectors USB Safely Remove Hardware?  Thank you

  USB keyboard/mouse can be disconnected without using the icon "remove."  In fact, I would be shocked if they were still on the list safely remove at all.

  But to answer your first question, which depends on whether you want to keep pilots autour for future use.  If this is not the case, go ahead and uninstall the device before unplugging.

• Need replacement for HP Pavilion 23 wireless keyboard and mouse

  I accidentally bent the USB transmitter for my Pavilion All In One irreparably, and so I am looking to buy a new transmitter of keyboard/mouse/USB to my computer. I'm looking online, but must use the wrong keywords because I can't seem to find any information on what game should I buy for my computer again.

  Can someone tell me please what set of keyboard should I buy? Thanks in advance.

  CCM

  CCMilesWA, welcome to the forum.

  Here is a page with different sets of keyboard and mouse wireless that should work with your computer.  You can watch to see that one you like and go to the HP store for more information.  Make sure that it is compatible with your operating system.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• All my USB ports are disabled; keyboard and mouse do not work, can not navigate to reactivate their?

  After installing Java rebooted my system update, while booting it showed Eroor message 'BootMGR' missing, disabled bymistake USB ports, now my keyboard & mouse not working does not help?

  Hi Abhi SR,

  ·        How do you disabled the USB ports?

  ·        What you did to fix the "BootMGR" error missing?

  If you have disabled the USB ports in the BIOS (Basic Input Output System), you will need to use a PS2 Keyboard and enter the BIOS for their re help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft USB wireless keyboard and mouse stopped working after I bought another identical to another laptop that is 2 meters from the hotel

  I bought another keyboard Microsoft Wireless Comfort Keyboard and Mouse 5000 for my partner as he just got a new laptop.  I liked my as the original and has therefore whoever we decided to buy exactly the same package.  The only problem is, as I plugged my partners, my mouse and keyboard do not work.  I've tried new batteries and I tried to use the usb, but nothing works and there is no reset button on the mouse or the keyboard (that I can see anyway).

  I'm desperate to get it working.  Any suggestions please?

  Thank you

  Hello

  See the keyboard or mouse manual to locate the reset button to zero, to assistance that may help you resolve this problem.

  If you are unable to locate the reset button then, I would say to contact hardware support team.
  http://www.Microsoft.com/hardware/en-us/support

• I have a keyboard and a usb mouse, when I plug a phone player or mp3 to an also my mouse port or the keyboard no longer works

  all the usb ports on my pc seem to work fine, I've updated the drivers, also checked the bandwidth and there is no conflict with the material.

  Hi elaine2712,

  When the mouse and the keyboard stops working, disconnect, then reconnect the keyboard and mouse to check their functionality.

  If the problem persists, we recommend that you download and run Microsoft Fix tool successfully. See USB port may stop working after you remove or insert a USB device
  See also: troubleshooting tips advanced to General problems USB in Windows XP
  

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PowerEdge 840: USB keyboard and mouse not working not.

  Hello everyone.

  Yesterday, I pursached a used Dell Poweredge 840 to function as a backup server, I'm having a few problems with it but I can't understand.

  I installed the server with Windows Server 2003 x 86 edition and downloaded the drivers on the Dell site. It works perfectly, except for one problem:

  USB keyboards and mouse refuse to work.

  PS/2 works fine however, but any USB keyboard or mouse will not work.

  Flash USB drives read very well, therefore I used to recover some files on the machine before, but it was connected to the network, USB keyboard and mouse do not work.

  They are not recognized at startup and do not allow to enter the setup of the BIOS after Windows has started, that they are not always recognized. Windows displays the device as unknown device.

  I tried to boot from a live CD of 14.04 Lubuntu, in which the USB keyboard and mouse do not work either. Only PS/2 wants to work.

  I have tried different types of USB mouse:

  • Microsoft mouse
  • Acer OEM mouse
  • Mouse laser Logitech M-U0007

  None of them could work, although they work fine on my laptop, the main file server which is a model of HP and Dell Optiplex desktop computer.

  I tried a few different USB keyboards as well, but they refuse to work.

  I ended up borrowing a pair of keyboard and mouse PS/2 to configure the server, but I want it to work with my USB keyboard and mouse.

  Just for the record: the USB flash drives do not work very well, it's just the keyboard and mouse is not working.

  Anyone know how I can get there?

  Thanks in advance,

  Dominique

  Hello.

  Unplug all devices connected to the USB and PS/2 ports. Unplug the AC power cable, wait about 1 minute and then press in and hold the button for about 15 seconds. Reconnect the power and power on the server. Connect the keyboard and mouse to the USB ports and try again.

• USB keyboard and mouse no longer work after motherboard change

  I recently changed my motherboard for an ASUS maximus VI Impact, keeping all the other components of the same with the hope of making a generation m - ITX. Now when I turn on the windows machine starts normally, but on the home screen when I type my password to connect, the keyboard and mouse seem to lose the power and stop working.

  I tried all USB ports and think its unlikely a hardware problem as the keyboard and mouse work in Bios menu. Also, I have messed around with heritage and setting USB in the Bios, nothing helps. I have a feeling that I have to install the new drivers of motherboard to enable USB support but I can't do that without logging, and the motherboard doesn't have a PS/2 port as well as rules using a PS/2 keyboard.

  After reading I think it might have something to do with the version of windows installed on the SSD, I'm using (this is a version for windows 7 Home premium 64-bit OEM) and different sources say that this can only be connected to a motherboard. Is it interesting to try to do a clean installation of windows or will it be a waste of time with my current version? My ideas, please help.

  Hello George,.

  Thanks for posting your query in Microsoft Community Forum.

  Before you start with the troubleshooting steps, please answer the following questions.

  1. What is the brand and model of the computer?
  2. How do you reinstall Windows on the new motherboard?
  3. Have you received the OEM (Original Equipment Manufacturer) installation DVD?

  The OEM of Windows version depends on the hardware ID. If you change the motherboard of the computer, hardware ID changes and you will not be able to install/work with the version of Windows OEM.

  I would recommend that you connect another keyboard and mouse to the computer and check if it works. If the game different from the mouse and keyboard does not work with the computer, you may want to consider reinstalling Windows. For more information on reinstalling Windows, you can ask the OEM.

  We know the result.

  Thank you.