Windows 7 - USB keyboard and mouse do not work once Windows starts

Similar Questions

• My keyboard and mouse do not work. Can't click or type anything.

  Original title: keyboard and mouse

  Hello, my keyboard and mouse don't work I can get on at the office but can't click on what whatsoever as the two keyboard and mouse do not work I tried the BIOS but still couldn't have tried different keyboards and mice, and they do not work or do not know what to do please help

  Hello Shirley,

  ·         Have you checked if the same keyboard and mouse work on other computers?

  ·         Are these PS/2 or USB devices?

  ·         You did changes to the computer before the show?

  Method 1: Try to connect the keyboard and mouse even to another computer to see if they work.

  Method 2: If they are PS/2 devices, then try to connect to USB devices to check for the issue or vice versa.

  Report of the results.

• Keyboard and mouse do not work when connecting

  I have windows 7 and ubuntu 9.10 "multiboot". He had been working well, until I rebooted. I had just done a WinPE boot drive, and I wanted to test it.

  Now the keyboard and mouse do not work on screen or login in safe mode.

  Help, please

  LKGC?

• System recovery: keyboard and mouse do not work

  HP 300-1025, Win7x64. Trying to do a restore of system of hard drive or CD, takes 3 to 6 hours to charge Cyber utility, but equipped with standard wireless keyboard and mouse do not work and can not select the option to retrieve!  Tried to use the wired keyboard/mouse but still not recognized. Help!

  Reinstall the RAM chips after contacts with cotton cloth to remove the accumulation of such static recommended by HP TotalCare. System load of Cyberlink, repaired Win7 and back to normal.

• USB keyboard and mouse no longer work after motherboard change

  I recently changed my motherboard for an ASUS maximus VI Impact, keeping all the other components of the same with the hope of making a generation m - ITX. Now when I turn on the windows machine starts normally, but on the home screen when I type my password to connect, the keyboard and mouse seem to lose the power and stop working.

  I tried all USB ports and think its unlikely a hardware problem as the keyboard and mouse work in Bios menu. Also, I have messed around with heritage and setting USB in the Bios, nothing helps. I have a feeling that I have to install the new drivers of motherboard to enable USB support but I can't do that without logging, and the motherboard doesn't have a PS/2 port as well as rules using a PS/2 keyboard.

  After reading I think it might have something to do with the version of windows installed on the SSD, I'm using (this is a version for windows 7 Home premium 64-bit OEM) and different sources say that this can only be connected to a motherboard. Is it interesting to try to do a clean installation of windows or will it be a waste of time with my current version? My ideas, please help.

  Hello George,.

  Thanks for posting your query in Microsoft Community Forum.

  Before you start with the troubleshooting steps, please answer the following questions.

  1. What is the brand and model of the computer?
  2. How do you reinstall Windows on the new motherboard?
  3. Have you received the OEM (Original Equipment Manufacturer) installation DVD?

  The OEM of Windows version depends on the hardware ID. If you change the motherboard of the computer, hardware ID changes and you will not be able to install/work with the version of Windows OEM.

  I would recommend that you connect another keyboard and mouse to the computer and check if it works. If the game different from the mouse and keyboard does not work with the computer, you may want to consider reinstalling Windows. For more information on reinstalling Windows, you can ask the OEM.

  We know the result.

  Thank you.

• Keyboard and mouse do not work on startup.help

  Keyboard and mouse are unresponsive at startup... help

  Hello

  Please write in the Microsoft Community Forums.

  I understand that the mouse and keyboard do not work to start the computer.

  Let me go ahead and help you with the issue.

  It would be more useful, if answering these questions:

  1 have you ever try to use different mouse and keyboard on the computer?

  2. What is the brand and model of the mouse and keyboard?

  3 did you do changes on the computer before the show?

  I suggest you follow the provided methods to solve the problem:

  Method 1: Start in Safe Mode:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  If the problem does not persist in safe mode I suggest you perform the clean boot:

  Method 2: run the clean boot:

  Perform a clean boot to determine if any 3rd party service is causing the issue:

  http://support.Microsoft.com/kb/929135

  Note: After you perform troubleshooting steps to clean boot, follow the steps in the link to start the computer to Normal startup mode.

  Method 2:

  Run the fix it and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Keyboard and mouse did not work properly after the service pack 2 update

  key Board runs very slowly and mouse runs through the screen when it is used. Acer Aspire 5050-3371 came with Vista home

  Hello

  Do you use a touchpad or mouse wired / wireless?

  Your laptop is connected with laptop keyboard?

  I suggest you to check if the keyboard and mouse work will find in safe mode. Follow the steps that will help you perform the following checks:

  Method 1

  a. restart the computer.
  b. start typing the F8 key.
  c. you get early boot option window.

  For more information, see: the boot advanced (including safe mode) options

   

  After the entry into SafeMode Log in your user account and check if the keyboard and mouse are working.

  After you perform method 1 Troubleshooting and if you find the keyboard and the mouse does not work correctly then you can perform the following procedure.

  Method 2:

  You can also perform the clean boot and check if you are able to start successfully. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate conflicts of third party software.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:http://support.microsoft.com/kb/929135.

  Hope the helps of information. Please post back and we do know.

• Microsoft WIRELESS 3000 keyboard and mouse do not work.

  I bought a set with wireless keyboard and mouse and even pretend to be plug-and-play, I couldn't make me work.

  What should I do

  Reference is Microsoft WIRELESS 3000

  Thank you

  Original title: keyboard and wireless mouse

  I'm still using keyboard and mouse cables so I'm not sure, but this help - http://support.microsoft.com/kb/838398/en-us , he mentions "Microsoft Wireless Keyboard 3000" in the list "applies to. At least, it can give you some advice. Also, If your kit is in this list - http://www.microsoft.com/hardware/en-us/downloads#keyboard - it seems that type/etc. Intelli point software is here.

  I hope someone else can "chip" with a response if the foregoing is of no use.

• All my USB ports are disabled; keyboard and mouse do not work, can not navigate to reactivate their?

  After installing Java rebooted my system update, while booting it showed Eroor message 'BootMGR' missing, disabled bymistake USB ports, now my keyboard & mouse not working does not help?

  Hi Abhi SR,

  ·        How do you disabled the USB ports?

  ·        What you did to fix the "BootMGR" error missing?

  If you have disabled the USB ports in the BIOS (Basic Input Output System), you will need to use a PS2 Keyboard and enter the BIOS for their re help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keyboard and mouse do not work

  I have a HP Media Center M7100e.  I have just completed a system recovery. After reboot, the screen indicates that I click next to complete the installation.  The mouse and keyboard do not work.  Work on the initial startup of hp screen, but are disabled.

  Please provide a solution.

  Thank you

  Ron

  OK... well., his back to recovery seems to be suspended.

  Here is the HP recovery troubleshooting document:

  http://support.HP.com/us-en/document/bph07144

  In this document are States:

  Recovery takes too long

  If your computer stops responding after using the recovery program, follow these steps:

• keyboard and touchpad does not work once the PC wakes up from sleep/standby

  Please help find the diagnosis and explain in detail what to do with the following problem: keyboard and touchpad for PC with Win 7 Ultimate stop responding when you wake up from sleep/hibernate implementation modes. If you plug the USB mouse, the cursor move again come back to turn off the PC is to reload the OS from scratch. Where to look in the PC software?  Thank you for your competent answer.

  Hello
  I suggest that you follow the steps below and check out them.
  You must be logged on as administrator to perform these steps.
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for the keyboard, and then double-click the device name.
  3. click on the tab power management and then check the option "allow this device to wake the computer".
  4. click on Ok.
  5 locate the touchpad and repeat step 2 and 3.

  See also: http://windows.microsoft.com/en-US/windows7/Solutions-to-common-power-problems

  You can also try to update the drivers for the keyboard and the touchpad.
  For more information: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Thank you, and in what concerns:
  Swati Keni-Microsoft Support Engineer

• Computer laptop keyboard and mouse does not work (updated Bios and took the batttery)

  I have HP G60-530US.
  
  I read all the posts that talked about updating the BIOS and then by doing a hard reset by removing the power cable and speaking on the battery and then hit the power button for a minute or simply to leave the computer for several minutes.
  
  A lot of people seems to have solved their problems.  Not me.
  
  I updated the BIOS and also did the hard reset like 10 times.  What other options are there?
  
  I have Windows 7-64 bit.  This problem occurred after I did the updates windows 11/04/13 or 12/04/13.
  
  Mouse power switch and the power button wifi button keys are the only ones that seem to work.

  Hello

  Go back to the device, right click on the Device Manager and select uninstall - when it is finished, restart the laptop.

  Any change?

  Kind regards

  DP - K

• Keyboard and Mouse/touchpad not working not not @ simultaneously.

  Earlier tonight while playing Guild Wars 2 I move my PC with the num pad and try to use the mouse to get a better view. The mouse works for about 5 - 1.5secs before locking and I have to release the buttons on the keyboard until the mouse is moved again.

  Now before you ask this same problem occurs when in windows.

  Update to the latest drivers.

  Envy of HP DV7 - 7212nr - no hardware changes.

  FIXED BY me with 3 minutes of google.

  http://en.kioskea.NET/forum/affich-217981-cannot-move-mouse-while-typing

• When I start my laptop, I get the screen of my password, however, my keyboard and mouse do not work

  What I have to do. I ahm runing a HDD test through the Setup utility. Error of a hard drive failure. Does this mean that I lost everything on my computer? I need to replace the hard drive?

  HP G60 laptop

  p/n nbo41ua #aba

  You can take it to a repair center and they will return for you. You can also remove the hard drive and connect it to another computer to back up data (recommended for pros).
  
  If you have a high-capacity USB flash drive or external hard drive, you may be able to use the Recovery Manager HP back up files. You must press F11 when the computer is turned on (when you see the HP logo) to enter the Recovery Manager.
  
  There is no guarantee that all or part of your data can be saved from the HARD part is defective drive... Just try to do the first chance you get.

• Keyboard and mouse does not work / computer does not start

  I have a HP Pavilion a6403w that my daughter uses to the school. One day, the computer stopped boot-up.

  I get to the blue screen to choose (F10 = Setup) ect... The only key that seems to work at all is the F-10. If I press it, the computer responds by indicating it's to enter the configuration mode (but only if I press it very shortly after you turn on the machine), but the computer is hang.

  I can't get into safe mode.

  I put the recovery disk and turn on the machine, but nothing.

  I'm at a loss... any help would be great!

  Thank you.

  Stick with the HARD drive. Ask them to send it to you.