Qosmio F750: windowed mode 3D available again!

Similar Questions

• Qosmio F750 - touch buttons does not work after Windows update 10

  I use a laptop Qosmio F750 (PQF75A-02Y00Q).

  Installed on the computer the previous operating system was Windows 7 Home Premium 64-bit. Then, I upgraded the operating system to Windows 64-bit edition 10.

  As expected, this change would cause problems to appear. The thing that is really bothers me right now is that the touch of the keys in the top right of the keyboard do not work as expected.

  The buttons respond always if you touch them, but they do nothing on the screen. for the most part. When I touch the Volume Up / Volume keys down, they work as expected. However, the key Mute, the button Play/Pause, the Wifi key on / off and Mode (as well as the key to toshiba bulletin board) eco button do nothing.

  Curiously, when I manually turn eco mode from the power settings mode eco button again turns the green.

  My last question is, how can I fix this so that ALL keys work as expected?
  
  -----------------------------------------------------------------------------------------------------------------

  I noticed that the recognition facial webcam was funny things as well, but everything what needed to be done was to recalibrate the installation for that to make it work again.
  Curiously, all the FN key functions work well.

  In addition to the question in bold, there are all the other drivers should I install to improve/restore functionality to my laptop? As the page of Windows 8?

  Hello

  I have the same problem since update 8.1 and now after 10 update, even more I lost the 3d display function since I updated to 8.1.
  MY QOSMIO is PQF75E-F750

• Qosmio F750 - need drivers for Windows 8

  I have a Qosmio F750 = PQF75A and I installed upgrading to win 8 supplied with the laptop. My laptop is working except for the 3D and Blu - Ray players. I contacted Toshiba Australia and told me that there are no drivers available for the players.

  If I understand the person I spoke to (I'm Hard of Hearing) he said that Toshiba will finally provide drivers for the problem. The thing is that Toshiba Assistant does not work, so I have to keep manually searching for updated drivers. I asked the person if it was possible to send me an e-mail when the drivers will be available, he said it was not possible for Toshiba to do and I have to go back to Windows 7.

  Really, I don't want to go back on Win 7 so is it possible that I can get my laptop to Auto check for updated for Windows 8 drivers somehow.

  Thank you
  John

  Hello John

  As far as I know there are some sort of self control doesn t so from time to time you must check that all offered updates on the Toshiba support page. I assume you have an Australian model, so the right page is http://www.mytoshiba.com.au/support/download

  I m from Europe and unfortunately can not help you with this. Best address for support is Australian Toshiba.

  Wait a bit and try to contact them again. They may have some good news about updates.

• Qosmio F750-10N - question on 2D and 3D display modes

  Hello

  I recently bought a Toshiba Qosmio F750 10N and it seems that she has two display cards and can support different resolutions in 3D and 2D mode.

  Is anyone aware of how go in 2D only mode to access a slightly higher resolution to 1366 x 768 capable 3D mode? None of the software control panels seem to be able to switch to 2D only mode in order to access a higher resolution.

  Of the product - the following internal video modes are supported: resolution: 2D mode: 1920 x 1080, 3D mode: equivalent to 1366 x 768

  Look forward to any assistance.

  Concerning

  Post edited by: neural

  Hello

  I agree with Akuma.
  Go to display properties.

  Make a right click on the desktop allows you to change the theme and the resolution of the screen.
  You can also click the Customize option after right clicking on the desktop and in the lower left corner, click on the option called display.
  You will find the ability to change the resolution.

  Notes; the 1 920 x 1080 is only available in 2D mode.

• Windows XP mode is available in Windows 8 Pro

  Windows XP mode is available in Windows 8 Pro

  Hi Mike,.

  Thanks for posting in the Microsoft community!

  You have reached the right forum for your question. If I understand correctly you want to know if you can use Windows XP mode in Windows 8.

  The replacement of Windows Virtual PC in Windows 8 is Hyper-V, in order to to use, your processor must support the industry standard called LATTE and it need a PC capable of 64-bit with 2 GB of RAM minimum.

  Reference: http://TechNet.Microsoft.com/en-us/library/hh857623.aspx

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Qosmio F750 - how to change the graphics memory dedicated to 2 GB...

  In order to get my Qosmio F750 ready to run some games, I've updated all the drivers on via the toshiba Web site and the NVIDIA site also the software downloading. This includes upgrading the BIOS to version 2.00.

  According to the [laptop specifications given on the Toshiba site | http://www.mytoshiba.com.au/products/computers/qosmio/f750/pqf75a-02y00q/specifications].

  I should have the following allocation of memory for the graphics:
  "4095 MB Total: 2048 MB of memory dedicated + 2047 MB shared memory.

  When I check the window Information on the performance and tools, I'm getting shows the following information:

  Graphics
  --------------------------------------------------------------------------------

  Display type card Intel(r) HD Graphics 3000
  Total available graphics memory: 1 696 MB
  Dedicated graphics memory: 64 MB
  Dedicated system memory: 0 MB
  Shared system memory: 1632 MB
  Display adapter driver version: 9.18.13.1422
  The primary monitor resolution: 1366 x 768
  DirectX version: DirectX 10

  Of course, when I look at the specifications of the laptop, I realize that the current graphic memory allocation matches the economy power Mode i.e. allocation of graphics when running on battery

  Normally, it would be nice, however, I don't see any change in the displayed info even when I'm running on current alternative.
  I checked all my power settings, but even when everything is set to "performance mode", the information displayed is the same.
  I try to look in the system bios to change manually the graphical distribution but none this option doesn't exist. Rather all options are defined in performance mode...

  So my final question is, * how can I change memory allocation performance mode graph as it is stated in the specifications of the system? *
  Is this something that happens automatically without changing the displayed Info?
  Is there a driver that I forgot to update? An update of the driver caused cela?
  A BIOS update caused this?

  On a side note, the audit of the DirectX Diagnostic tool, I have the version of directx is displayed as version 11. So I thought that the problem was with the displayed information. But even on the Diagnostic tool gives me the same information.

  I would be very grateful if someone could help me with this.

  Thank you
  Jean-Pierre

  Hello

  This is controlled automatically by the graphics driver.
  If the application that is running would require more RAM (IE game), the graphics card would control this value and I would add some of the memory to the memory of the graphics card.

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• Qosmio F750 - Media test failure

  Hello

  I have the laptop Qosmio F750 I bought about 2 years ago. I have a problem when the page Realtek PCIe GBE family controller series xv2.37 (20/10/10)
  PXE - E61: media test failure, please check the cable.

  At first I just turn off my phone and turn it back on again, and the page would leave. But now after 10 times, the page is still there. I tried pressing 0, while the laptop is running to reinstall windows. But the page just kept appearing every time than restarting the laptop. Now I've really frustrated m.

  Do you know any suggestions? And by chance, where is the nearest service centre maroubra Toshiba?
  Thank you, appreciate it

  I think somehow HDD is troublemaker of disorders and not recognized as a boot device.
  Did you create the recovery disk? If Yes use this disc to check if the HARD drive is accessible or not.

  I can't say for sure but I m afraid you need new HARD drive.

• Impossible to get free 3D glasses to work on the Qosmio F750

  Hello

  I tried to make it work on my Qosmio F750 without success. whenever I try to not calibrate the 3D using the face recognition, theres no poping window until the recognition of face, am I missing any driver?

  Hello

  Can you please post exact model laptop number?

  Usually the X-Tune: software must be pre-installed on a Qosmio F750.
  This software allows you to calibrate the 3D effect.
  http://APS2.toshiba-tro.de/KB0/TSB1C038D0000R01.htm

  Please be sure that Super-d Driver IC (V1.0.1613.809 or later) has been installed
  All these software and drivers should be available on the Toshiba driver page.

• Qosmio F750 - some keys on the keyboard stoped working

  Hello

  Since 3 months ago, I have a Toshiba Qosmio F750. The other day, I have just the laptop powered and noticed some keys (a, b, n, enter...) didn't work at all. I tried to clean blowing under the keyboard and nothing. In the windows start these keys do not work. Anyone with the same problem?

  Someone knows how to fix this?
  Is quite annoying to have to use an external keyboard with a laptop 3 month old...

  Thank you!

  The same happens when you use the operating system in safe mode?

• Qosmio F750 - 12 p / BD - RW Pioneer BDR-TD04A - Bluray discs will not play

  Qosmio F750 - 12 p
  BD - RW Pioneer BDR-TD04A
  Windows 7 Home Premium

  Problem: Bluray discs will not play. CD will play.

  History: I did a clean install of Windows 7 and then installed 60 all the drivers from the support site for this laptop model. Or at least those that would install. Interestingly, the driver of Toshiba Bluray would not install. the installation process stated "player not found on your system" or something like that.

  What works the device currently is a 2006 (?) Microsoft driver.

  Clues? It's the second Toshiba laptop, I had to (second-hand), and they both had this problem: DVD players do not play DVD right from the start. Very annoying.

  Update:

  The "Bluray driver" mentioned above is just the own DVD from Toshiba software. It is not a driver. And it does not find the optical drive Bluray on my laptop!

  - The Bluray optical drive will play DVDs, but not of Bluray discs. I'll borrow an another DVD Bluray at the local library, to ensure that it is not a disk failure.

  -The Wifi does not work ("network controller driver is bad / missing")

  - I probably deleted the hidden partition that contains the Toshiba "system recovery disk". I have re-installed Windows and written too. [You are supposed to press "0" when the power, but it does not show the Toshiba Recovery console. I scoured the hidden with a freeware Windows partition and there is nothing usable here.]

  It is a stupid economy, not providing a system restore disk AND do not provide drivers download work. (The drivers offered on the site are simply updated). It makes the laptop value much less long term and creates bad word-of-mouth over time.

  The only station I have is to buy a Blu - Ray external drive and perhaps a Wifi dongle. Crazy.

• I can't install driver on my Qosmio F750-110 wireless

  My qosmio F750-110 has win7 home edition (64) but I have them upgraded to windows 8.1 but I wasn't happy so I desided to them downgraded to win7 profesional (64) and I put all the only drivers.the I can't get it market is the driver for wirelles and I don't know what to do.i tried to download tha driver drivers here but nothing happens.

  Please help me

  According to specification for laptop, your laptop Qosmio has Atheros WLAN + BT card inside.
  I do not know what you have installed and what is the status of the drivers in Device Manager, but all the drivers, tools and utilities that you can download driver Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp or portal Toshiba WLAN - http://aps2.toshiba-tro.de/wlan/

  When everything is installed properly you can use the WLAN connection when the wireless network adapter is correctly enabled and it can be done by using the FN + F8 key combination. It works for you?

• Qosmio F750 - glass free 3D 3D non-active

  I changed HD, first with the last drivers I could activate 1080 p 3d games I saw them in 3D.

  now I've changed my hd, I installed the drive recovery
  I installed the same driver version

  The nvidia control panel active 3D

  3D game does not start

  NVIDIA 3d test does not start 3D

  Xtune see 3D test

  Hello

  I guess you can adjust track settings by using the X-Tune: software.

  Here are the step by step instructions:
  [SuperD software X-Tune to adjust the 3D effect on the Qosmio F750 | http://aps2.toshiba-tro.de/kb0/TSB1C038D0000R01.htm]

  In addition to 3D games support (supported only in mode full screen resolution 1920 x 1080) on the Qosmio F750 4 following updates must be installed:
  (V8.17.12.9039 or later) NVIDIA display driver
  Super-D IC driver (V1.0.1613.809 or later)
  TOSHIBA drive Blu - ray (V1.01.299 or later)
  BIOS (V2.00 or later version)

  Please visit our driver download portal and select the corresponding model of laptop. Download and install the above updates. You can also update will be distributed via the Toshiba Service Station.

  _Source: _
  [Support for glasses free 3D mode for games on the Qosmio F750 | http://aps2.toshiba-tro.de/kb0/TSB1C038G0000R01.htm]

• How to connect Qosmio F750 to 2 projectors?

  I have a Qosmio F750 and 2 DLP projectors,
  a connected via RGB output and the other connected to the HDMI output via a HMDI/RGB adapter.

  I've set up the Nvidia control panel with 2 projectors with desktop across 2 projectors,
  both the value 1024 X 768. And then start windows Explorer by selecting a JPG image side by side 2048 X 768.

  The image is displayed on the screen with the two images side by side, projected from a projector, and the other projector displays the computer screen wallpaper.

  I want to display the image on the left on a projector and the other image on the other projector.
  How I set up correctly?

  Colinmeth

  I think you need some 3rd party software to do this:
  For example displayfusion
  (www.displayfusion.com)

• Qosmio F750 - cannot get certain functions to work after 8 Win uprgade

  I have a Qosmio F750-125, PQF75E.

  Since I upgraded to Win 8, using Toshiba Upgrade Assistant I might add, I had a few problems.
  Especially not be able to get my Toshiba Blu - ray player to install.

  Finally I managed, still haven't exactly how, but somehow, to install the latest version 1.0.0.5.70A.
  The problem now is that the 3D feature do not always seem to work.
  When I open a 3D movie, I get only the image to view side by side, despite clicking 3D button.

  I tried to update the Nvidia driver (v290) to the latest version v314, available on the Nvidia for my graphics card, GeForce GT540M but whenever I get a message that the driver can not find hardware driver compatible. Eventually leave in the update files downloaded by Toshiba Upgrade Assistant I managed to install the v306. However, I still cannot install v 314, after the "system check" I always get the message that the driver can find hardware driver compatible.

  However, 3D does not always work. I noticed that the face detection (SuperD Xtune) does not automatically start with the Blu - ray player when I start or open a 3D file to be read by the Toshiba Blu - ray player, it was.

  How can I get my Blu - ray player to replay my 3D correctly.
  If I open Xtune I am able to calibrate the 3D, and then it closes.
  I don't see an app under all the apps that seem to have something to do with the face detection function.
  Is there a setting that needs to be changed, an additional driver must be installed or what?
  I'm really disappointed with the support I received from Toshiba themselves on this issue.

  I also wanted to update the BIOS of my laptop.
  My bios version is 2 December 2011, but I noticed that a newer BIOS is available from the Web of Toshiba site dating back to February 2012, if I'm not mistaken.

  I downloaded but when I run it I get a message that my computer is not compatible.

  * Bleep *, it's frustrating.
  I want to recover my 3D feature and don't forget to run the most appropriate and most recent drivers at any time.

  > Above all not be able to get my Toshiba Blu - ray player to install.
  > Finally I managed, still haven't exactly how, but somehow, to install the latest version 1.0.0.5.70A.

  After the upgrade to win 8, you will need to contact the call center Agent for download of the Toshiba BlueRay player to win 8 valuation

  > Eventually leave in the update files downloaded by Toshiba Upgrade Assistant I managed to install the v306. However, I still cannot install v 314, after the "system check" I always get the message that the driver can find hardware driver compatible.

  Cannot install the nVidia page graphics driver by running the exe.
  If you want to install a driver from nVidia page, you need a folder that contains the driver to the driver files, and then you can update the driver through Device Manager by using the Advanced installation procedure.

  > I downloaded but when I run it I get a message that my computer is not compatible.
  You will find on the page of the Toshiba UE driver BIOS v2.0
  The update of the BIOS requires value-added package that must be installed before trying to update the BIOS
  Also, the system driver Toshiba to win 8 must be installed.

  If you will not be able to update the BIOS Win 8 running, you should try updating the BIOS runs only pre-installed Toshiba system Win 7.