Qosmio G20 - 102 Shutting down unexpectedly

Similar Questions

• Qosmio G20-102 TV TUNER: how to get this to work - what cables are required?

  Hey everybody,

  I just installed vista on my laptop QOSMIO G20-102 (PQG20), I have media library now.
  My laptop came not like MEDIA CENTER EDITION, it came under the home edition of Windows XP (laptop purchased in July 2005).
  I got 3 cables which I have no idea how to use...
  laptop was purchased in Dubai/Emirates and I live in Malta

  These are the cables >
  http://img399.imageshack.us/img399/7189/dsc00780gi6.jpg

  Now for my question (s):
  1 which of these cables do I need? Im just trying to figure out how to get my satellite tv or digital cable to work on my laptop.
  2 antenna adapter (see picture) is not for coaxial cable, what can I do?
  3 I did WINDVR more due to the upgrade of vista, Media Center Gets the job done but I don't know what to do... This guide has confused me even more > http://www.microsoft.com/windowsxp/mediacenter/using/setup/settop.mspx
  I don't have IR control cable, I do not have a remote sensor (but I have some sort of built in the remote sensor on the front of my laptop.

  I'm looking for advice as for example buy this, get rid of it, install this etc...
  Please, anything that can help is appreciated!
  If you need information more just ask, I am here ;)

  Yours sincerely
  Ishmael

  Hi ismael,.
  I'll try to help with that, but it's a long way to the road...
  I don't know what Tv system is used to Malta (Pal)?

  The best way to set up your TV's with Media Center 2005 edition.
  Cables:
  Check the back of your cable TV installation box and find the composite or SVHS output. If you have only the composite, you can use the composite cable of the posted image. If your TV decoder has the SVHS, so you should use, to the better image than composite. You must obtain a SVHS cable for this.
  Look for the audio output rca, too. Mix with the composite cable for the audio Qosmio.

  But you must have:
  1 control cable IR, for media center 2005 configuration as well as your TV decoder. It is cable connected to the remote sensor (see fact sheet on the back).

  2 sensor for your remote control and configure it with the remote control of your TV decoder. In this way, you can control the receiver cable channels, using the remote control for your Qosmio G20 media center edition.
  Recovery: you can change the channels on your TV decoder using the qosmio remote control.

  3. remote control for you media Center 2005, one that came with your Qosmio g20.

  Open the TV on Media Center 2005 configuration and follow all the steps required for installation.
  You must follow the guide, as is explained in the image you posted:
  http://www.Microsoft.com/windowsxp/mediacenter/using/Setup/SetTop.mspx

  If you have all these cables, you can use the Qosmio player to watch TV. It is not tied to windows OS.
  Here, simply connect the coaxial cable and let the Qosmio player search for available channels in your area. Qosmio player has the opportunity to set the colour TV system in any part of the world. all NTSC regions in all PAL regions.
  If you have the remote control for your Qosmio, TV keys will work directly with the Qosmio remote sensor on board, without needing the external sensor of Microsoft.

  I hope this helps you
  Francisco

• Test a Qosmio G20 102

  Can someone post or send me by e-mail ([email protected]) a test result of Everest (AFNOR.fr) on a Qosmio G20 - 102 (120)? I am curious about the performance of the memory. Thank you

  Hi Andrei

  I don't know if you find a user with a test result of Everest, but you can download a free version of this program and do a test by yourself of m.
  The free download, you will find on this page:

  http://www.soft-ware.NET/system/Steuerung/benchmark/index.asp?Licht=Everest+download

  Good bye

• Qosmio-G20-102 stops at windows xp startup

  Hello

  I have a Toshiba Qosmio G20 102 is to put an end to the machine at the start of windows xp and after a few seconds the fan voice raised high and I turns off the machine several times before she continues start.

  I removed the devices all with no luck. He kept stop sometimes and some other work.

  Any idea on how to solve the problem?

  Concerning

  Hello

  Please see Toshiba site for new display drivers.
  By hand, you should always use the Toshiba drivers because they are designed for this unit. nVidia drivers are created for desktop PC and not for laptops.

  Good bye

• Qosmio G20 102: problem RAID the installation of windows xp media center

  First of all I did not the raid driver for my qosmio. I tried the RAID of Qosmio G20, another pilot but when it reached the stage when I ask windows to format the C driver it shows me an error. It is said that there is an error in the KR10N file and it stops there.
  Please help me and thank you.

  Hello

  It seems that the Qosmio G20 102 belongs to the series of PQG20E.
  Research on the European driver Toshiba page I found the RAID for Windows XP MCE driver v1.03.0008 (can also be used with XP Pro).

  You will need an external USB FDD to include this driver in the operating system.
  But note; After installing the RAID driver you shouldn't t format the HARD disk or create a new partition, because that will remove the RAID driver from the HARD disk and installing the OS fails!

  I hope I could help you would also appreciate a feedback ;)
  Best regards

• My guard computer shut down unexpectedly when I play games.

  My guard computer shut down unexpectedly when I play games. Now it is not always the case, just sometimes. The other day I was playing Sims 3 all day, literally, with the graphics settings maxed out and had no problem. The next day, he would crash as soon as it finished loading, even with the graphics settings at the bottom. Today, it was working fine this morning and now it crashes again. I had the same problem on and off with other games as well, Halo 2, Kings Bounty, UT 3. Here is my system:

  OS - Vista Ultimate 32 bit
  Processor: Core 2 Quad Q9400 @ 2 .66GHz
  RAM - 4 x 1 GB PC6400 DDR2/800
  MB - MSI P7N SLI - FI
  HARD drive - 150 GB x 2 (Raid 0) Raptor 10 k RPM
  PSU - 1000 watts
  GPU - NVidia GeForce 9800GT 1 GB (x 2 in SLI)

  And the error I get from Event Viewer:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I got the error almost everyday since I got the computer, about 10 months ago, but it only blocks the computer if I play a game. I tried the 'fix' that removes the WMI event viewer 10 error, but everything done was make sure the error is not logged. I also tried another fix I found me delete the files in the repository, but that no longer works. I also run scans of complete system of virus/malware Spybot Search & Destroy and AVG 8 and verified the updated driver for my hardware. I also ran diagnostic tool memory. Who has good/clean/current. Can it be fixed or what I have to reinstall the OS?

  Hi JerHekSr,

  Thank you for using answers Forum.

  The first thing that comes to mind would be to check the motherboard manufacturer for an update of the firmware/BIOS.

  The error message mentions "loadpercentage > 99' which looks like you are running may at maximum load of the CPU while the game and that is the cause of the crash. You could try a clean boot to prevent the using CPU resources while you play to see if it makes a difference of strtup programs.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click Start collapse this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  c. under the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OK and then click restart .

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK , and then click restart .

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start to reduce this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click the Normal startup option, and then click OK .

  When you are prompted to restart the computer, click restart .

  I hope this helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista shut down unexpectedly and repeatedly during use

  After four years of perfect performance, my 64-bit Vista Home Premium is all the sudden closure about every hour... nothing in common on the programs I was using stationary (Word, Firefox, Thunderbird, usually).  The "reccovered of the unexpected shutdown" dialog box shows the following:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.0.6000.2.0.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               d1

  BCP1:                                                    BCB1281D

  BCP2:                                                    00000002

  BCP3:                                                    00000000

  BCP4:                                                    9E686031

  OS version: 6_0_6000

  Service Pack: 0_0

  Product:                                               768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini033012-03.dmp

  C:\Users\Tim\AppData\Local\Temp\WER-93203-0.SysData.XML

  C:\Users\Tim\AppData\Local\Temp\WER54.tmp.version.txt

  Hello, Tlundell,

  Control 0xD1 bug: DRIVER_IRQL_NOT_LESS_OR_EQUAL

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff560244 (v = vs. 85) .aspx

  It may be an old damaged video driver

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Restart the computer and start typing the F8 key

  Select Mode safe mode with networking

  Download the following tool and run a scan complete to rule out malware

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  Download the following tool.  It will determine which driver can cause the problem

  BlueScreenView-

  http://www.NirSoft.NET/utils/blue_screen_view.html

  When finished, reboot and let Windows load

  Start > type CMD

  Right-click on command prompt and select run as administrator

  Type SFC/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Start > type CMD

  Right-click on command prompt and select run as administrator

  Type chkdsk /f /r

  Press enter

  You will receive a message about the volume must be locked and you want to analyze during the recovery.

  Press y and press enter

  Restart the computer to start the scan

  Once Windows restarts, open the event viewer > Windows Logs > application log

  Find the Winninit entry that will display the results of the analysis

  Go to update drivers and the manufacturer's website

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  If all else fails,

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html this tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

• My computer shuts down unexpectedly, all the time. It is not the disk space. I don't know what it is.

  Original title: MY COMPUTER IS down unexpectedly, ALL THE TIME, IT is NOT DISK SPACE... I DON'T KNOW WHAT IT IS

  CAN YOU PLEASE ME SAY WHAT DO TO SLOVE THIS PROBLEM, MY COMPUTER STOPS UNEXPECTEDLY, ALL THE TIME.

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Keep in mind
  This associated heat does not always mean too much heat as it is often a part or a component
  who is too sensitive to normal levels even heat.

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• MacBook Pro shut down unexpectedly

  My Macbook Pro (with the retina, end 2013) stopped unexpectedly. Running OS X Yosemite 10.10.5. It's never happened before, but did it 3 times today already. Not on again unless I connect it to a power source even if it was 60-80% charged each time that its judgment down. It doesn't give me an error when I turn it back on, the only thing substantially different is that it defines my date and clock in one year. I made diagnostics, but it does not found error!

  I would like more information: can put you a list of Etrecheck here please: download from etrecheck.com

• Satellite P10 shuts down unexpectedly after only 4/5 minutes to be turned on

  Hey, I have a problem with my Satellite P10 2.5 years.
  The problem is it turns off unexpectedly after 4/5 minutes being powered on.

  After he fires it on again for about 7 to 10 HOURS, even with the power drive inside displays the 4 lights on the front, but it will not even power the start-up routine.

  I tried different combinations of power/battery and I still get the same problem.
  I'm sure that it is overheating and then take hours to enhance down.

  Your opinion on this would be appreciated.

  Thanks in advance...

  Ben

  Hi Ben,

  Certainly, it sounds like an overheating issue from your description, although I expect to recover much faster than 7 to 10 hours. You can try the technique of aspiration of dust on the grids of aspiration air to see if it improves the situation. Also check that the fans are working properly and that there is sufficient space around the appliance when it is in use.

  Kind regards

• Qosmio G20 sometimes closes down when clocked at 100%

  My G20 for apparently no reason to occasionally stops by itself which may be due to not having fans is not enough air, but I fear that when I run some programs the processor works 100% and this causes finally the computer overheats and stops. I run Registry and patrol when I run a scan it immediately shoots up to 100%.

  Is this a problem with my CPU?

  Furthermore why did the defragmentation with XP media do not completely defrag and chunks of fragmented data sheets?

  Any help on this is much appreciated.

  Hello

  Have you checked the processes that are running in the context of the operating system?
  If this isn't the case, then do it! In the Task Manager, you can see the process and which applications have pointed out the CPU.
  But it s not unusual that the CPU will run with maximum performance when certain applications and programs have been launched.
  However, I think as a new OS installed could stress CPU

  In addition, you can check the Toshiba saving settings and set the CPU, the speed of processing and method at different levels of cooling.

  Also check the fans and cooling modules and if necessary try to clean with the vacuum cleaner.

  I found an interesting paper on the problems of defragmentation:
  http://support.toshiba-tro.de/KB0/TSB6B01MF000FR01.htm

• Computer shuts down unexpectedly and does not start

  I have a gateway NV52 running windows vista Home premium 64-bit.
  It is about four years old.

  Lately, I'll work on something, and the computer turns off without any warning. If not off, but just completely turn off as if it was a desktop computer and someone he disconnected.

  The last time he does, when I tried to put it back to it gave me a blue screen. Time thereafter, it gave me an error message saying 'Windows failed to load correctly' and gave me the ability to "repair windows" or "start windows normally". When you select the option the computer immediately turns off again.

  After about three hours, I tried to start again and got the same error screen. I chose "repair windows" once again, and launched a sort of auto repair program. After some time, he said it was over and I have to restart my computer. I rebooted and was able to boot up properly.

  I'm not sure that the problem has been corrected, because other than the unexpected interruptions, there was no sign of distress beforehand. My computer was working normally, and there is no virus/malware/etc.

  Hello Colin P.

  Generally, a system shutdown complete is the result of a hardware such as feeding problems, overheating or other material failed the system. Just to check that it is malicious not associated, run a complete virus scan on the system. If the system continues to stop, then I suggest you call the manufacture of equipment and ask them to help you run hardware diagnostics.
  Details of the bridge.

• U44M1P7 error message / ASU has shut down unexpectedly

  I get the U44M1P7 error message when you try to update Photoshop CC Creative cloud.

  The last lines of the log reads as follows:

  [Total Timer] took 5912 milliseconds (5,912 seconds) DTR = 1891,07 Kbps (1,84675 Mbps)

  17/12/15 14:06:06:367 | [INFO] |  | OOBE. OF |  |  |  | 51551. Exit code: 0 - no error.

  17/12/15 14:06:06:367 | [INFO] |  | OOBE. OF |  |  |  | 51551. *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  17/12/15 14:06:06:367 | [INFO] |  | OOBE. OF |  |  |  | 51551. END - Installer Session

  17/12/15 14:06:06:367 | [INFO] |  | OOBE. OF |  |  |  | 51551. *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  17/12/15 14:06:06:876 | [ERROR] |  | OOBE. OF |  |  |  | 51565 | ASU has quit unexpectedly.

  I use a MAC with El Capitan 10.11.2.

  I tried to restart the MAC, run CleanMyMac and tried a direct installation of the PS, but the update always get an error message.

  Please tell us what should I do to solve this problem.

  I'm glad to hear that!

  You are welcome!!!

• Qosmio G20-102 (PQG20): Vista Upgrade Advisor says I need updated drivers

  My Windows Vista Upgrade Advisor says I need a few following things,

  -These issues of device for Windows Vista-
  See the following table for the device problems you should be directed to ensure that they work properly with Windows Vista

  > ACPI Bluetooth Toshiba

  -Cannot find information about these-(même si elle dit que ces dispositifs peuvent être mis à jour après la mise à niveau vers Vista, je ne veux pas risquer quoi que ce soit.) devices

  > TOSHIBA RAID virtual device

  > Compatible TOSHIBA ACPI value-added device to use general and logical

  > Bluetooth RFCOMM

  > Texas Instruments PCIxx21 Integrated FlashMedia Controller

  -These issues of program for Windows Vista-
  See the following table for the program issues that you should address to make sure that they work properly with Windows Vista.

  > (Not very important, the rest are tho) sonic DLA

  > Alps Pointing - device Driver (is it not the touchpad?)

  > TOSHIBA utilities

  > Microsoft Interactive training (Don; t know what it is...)

  Thank you in advance for your help, I tried to search the Download Center of Tishiba for some updates, but none of them are very recent.

  You are right. Section Toshiba download drivers are not yet available. Unfortunately, no one knows how long it takes for them, but if your device is delivered as Vista capable laptop computer will be certainly supported for Windows Vista.

• Qosmio G20 102: Possible CPU upgrade

  Hello! Is it possible to Exchange my CPU, which is an Intel Pentium M 760 2 GHz - Buss speed 533 Mhz for an Intel Pentium M Core Duo T2500 2, 0GHz with Buss speed 667 Mhz or which will cause problems? Thank you!

  PER DAY

  Hello

  Is there a special reason to upgrade CPU on this real great and powerful unit? Is the performance good enough for you?