Touchpad not working not not by Satellite Pro L300

Similar Questions

• PC diagnostic tool does not not on Satellite Pro L300

  When I try to run the utility Toshiba pcdiag.exe I get an error message.

  The details of this message say that the 'fault Module name is KERNEL32.dll.

  I uninstalled the utility programs original and downloaded the files updated on the Toshiba site, with the same result - I always get an error message.

  This fix is there for that?

  Thanks in advance for your suggestions.

  Hello

  Are you using Vista or Win XP OS?

  I checked the page European driver of Toshiba and the PC Diagnostic tool has been published only for Win XP.

  I think that might have something to do with your Windows operating system installed.
  All first as you should check if the PC Diagnostic tool is compatible with your operating system and secondly, you must update the OS before install you this tool.

  Good bye

• Satellite Pro L300 - touchpad does not work

  Hi all that I need help urgent because it drives me crazy. First of all, I use XP PRO. My laptop is fairly new, only around the age of 4 months, I had no problem with it at all. I formatted my laptop yesterday and reinstalled all the drivers that I downloaded here:

  http://www.ISD.Toshiba.com.au

  and everything works fine except the touchpad. I have already installed shared, utilitarian toggle the touchpad Module and I have the latest BIOS installed and reset all default settings and I made sure that the touchpad is enabled in the BIOS, but also pressing FN + F9 to enable during Windows.

  I installed the latest touchpad driver Synpatics I downloaded from the homepage of Synaptics. But for some reason any, that it does not work, I don't know what is the problem here. My touchpad worked before I formatted my laptop, it worked fine and has never had any problems. Will you please tell me what is wrong because I need to use my touchpad sometimes as well, so I can't use a mouse all the time.

  Hello

  > I installed the latest Synaptics touchpad driver that I downloaded from the home page of Synaptics
  I think that you question refers simply to the driver for the touchpad that is missing or incorrect.
  I put t know how it works on Toshiba notebook Australian, but the Toshiba European Satellite Pro L300 units needs touchpad different drivers. some use the Toshiba touchpad driver and some units need a driver for the Synaptics touchpad.

  In your case, I recommend this controlled again.

  By the way; My touchpad is always disabled so that en external mouse is connected.
  It is parameters that control it. Please check in your touchpad properties too!

• My new Satellite Pro L300 will not work

  I bought a new Toshiba Satellite Pro L300 on eBay. I connected all the cables according to the installation guide. At first he asked my details, then I logged in and it went to a pages where he says he was preparing. Then I was sent to the newspaper in the section, and the same page appeared saying that he was preparing.

  After what happens about 5 times, he went to a black screen where the only thing I could see was my mouse cursor.

  I closed and restarted, I tried to go into the settings using F12. I was not able to work at all, no matter what I do.
  Unfortunately, I don't have a CD of the OS, but it was announced as having Vista as OS and have Microsoft Office Suite on him as a built-in wireless modem, so it was supposed to be ready just to turn it on. Well I can't even turn it on.

  What should I do? How should I do?

  At first, I must say that F12 has nothing to do with all the settings.
  At this point, I recommend using the new operating system installation using the HDD recovery procedure.
  How to proceed as a result of this document, you can find > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  When the OS is installed and started up properly first thing you need to do is to create the disc of recovery facilities. "You can do it using preinstalled" Toshiba Recovery Disc Creator. The shortcut is placed on the desktop.

• Satellite Pro L300 - sound is not working properly

  Hi all!

  Last week, I bought my Toshiba Satellite Pro L300.
  I have had no operating system with the laptop, but I had my own XP, so I changed the SATA drives in compatibility mode and installed windows XP Pro.
  (By the way this is a Vista laptop officially)
  I installed all the drivers, but I have a problem with the sound. It has a bad quality, but this isn't the biggest problem.
  If I start listening to music, the sound stops every 3-4 seconds for a fraction of a second. It's as if the processor worked (like the computer was loading, and the processor is a bit overloaded) I usually have this experience if I run many programs simultaneously on my old computer, it slows down and the music stops for a second. But on the new laptop, I run winamp, I have dp nothing but listen to the music, and I get this problem.

  Can anyone help? Is it because of XP? Or the driver does not work properly? Or I have a big problem and should go back to the store?
  Please write!

  Hello

  Did you notice HARD drive activity when this happens?
  Maybe some anti-virus works in the background.

  Maybe you can order original Toshiba recovery DVD for your laptop model. Check it out under the https://backupmedia.toshiba.eu/landing.aspx

  Using WXP only? I ask this question because I believe that you can only get to this Vista laptop.

• Satellite Pro L300 1AI LCD screen backlight not working not

  Hi all

  I have a Satellite Pro L300 1AI running Windows Vista the computer starts and works fine but the backlight on the screen doesn't seem to work.

  Y at - it none of the Vista settings that can affect this (other than the Fn key command on the keyboard and settings) in Control Panel? Strangely, it seems to have happened since I installed Skype but I don't see how this could possibly affect it.

  Any help is much appreciated...

  Hello

  What s wrong exactly? Brightness screen laptop s is too low?
  Everything you see on the screen as behind a thick fog?

  Well, usually the FL Inverter control the backlight of the screen and if the FL inverter starts to malfunction, so you would get the problem like this.

  There is no alternative to replace this inverter FL.
  It s a small part behind the frame of the screen I think that it s a job for a technician in ASP.

  Welcome them

• Satellite Pro L300 - USB card reader does not support the 64 GB

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Posted by Trees
  

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Hi, here is a link to not detected by the PC card reader:
  http://KB.SanDisk.com/app/answers/de...CTED-by-the-PC
  You can take a look, hope it will be useful to you.

• Satellite Pro L300 does not illuminate

  Hi all, I'm new to this forum.

  I have a Toshiba Satellite Pro L300 and I've had it for about 2 years.
  But yesterday I closed the laptop as usual. But later I went back to it and tried to turn it on. But it does not work. Instead, when I press the power button the LED next to the battery symbol flashes orange/orange 6 times and then turns off.

  Can someone tell me what it is? I tried to let it load, but that has not worked. The amber light is the only light that flashes. It does not recognize that I plugged in the charger and I don't think that the battery was flat. So I'm angry and helpless right now.

  Can someone help me please?

  See you soon.

  Hello

  There are several indicators;
  DC, while running, the main battery, LED HDD/ODD.
  So I guess the power LED flashes in orange. Right?
  This means that something was wrong on the motherboard.
  Maybe power supply electronic malfunctions

  In this case, there is no much to do only mobo replacement could help to...

• Satellite Pro L300 will not start

  I have a portable Satellite Pro L300 and he won't start (in other words the power button and not going not past the first screen).

  Works for keyboard, but F2, F8 or F12 will not do anything, I can't here the disk hard powerup but it's like no one is at home. I don't know if it's the motherboard or the onboard battery. The computer is about 7-8 years

  Can anyone help.

  It s certainly nothing wrong with a RTC battery (as you said internal battery).
  The RTC battery can be charged. The unit must be turned on and adapter must be connected at least for about 18 hours.
  But I guess that this isn't a problem.

  The laptop does not start because of a hardware malfunction, but it's hard to say what role may be affected. But you should absolutely consult the RAM modules.
  This should be the first step, since the RAM modules are easy to replace.

  All other parts should be checked by the type of service.

• Shortcut keyboard Toshiba Satellite Pro L300 - properties will not end

  Dear lovers of Toshiba:

  This week, we have installed three new systems of Toshiba Satellite Pro L300 (two L300-153, a L300-156) with recovery media for Windows XP since the L300-156 product (no date on the disc, only two codes: CD 5 124624 and GMR400841EN0).

  The machines are beautiful and very effective, except for one problem: when the logout or shutdown Windows XP, the program called 'The Toshiba keyboard shortcut properties' does not stop automatically and opens a dialog "end program". The user may terminate the program immediately by clicking on the button 'End now' or wait until it to expire, after which the system disconnects or terminate normally.

  We noticed only after the installation of Service Pack 3 on all machines, so I don't know if the problem was present before SP3 has been applied. (We will be definitely check this on the following system and display the result.) Install the rest updates Windows with Service Pack 3 does not resolve the problem. Not more then that uninstall Toshiba Hotkey Utility by installing the package current, freshly downloaded from the Toshiba support area.

  A colleague suggested disabling startup programs. There are two likely choices for this purpose in the startup list + of + msconfig +: * thotkey * and * TFncKy *. Disabling either of these programs allows the disappearance of problem, but the functions of the * Fn keys are lost. The key functions are also lost when uninstalling the Toshiba Hotkey Utility.

  My question is of two parts:
  # Comment this problem be solved permanently, or circumvented (other than to say the customer never disconnect & close always the cover to hibernate)?
  # If there is no solution yet, how can a bug report situate with Toshiba, so I can get them the information they need to solve this problem and establish the responsibility?
  I will continue to post new information here that I acquire until a permanent solution is reached.

  Although this problem seems trivial and 'cosmetic' it's always awkward having to provide new machines customers with such an obvious flaw. It ourselves and Toshiba look bad, especially after that we sold the idea that people avoid problems of this kind to choose a Windows XP on Vista platform.

  Thank you, Robert Phair
  Director.

  > when the logout or shutdown Windows XP, the program called 'The Toshiba keyboard shortcut properties' does not stop automatically and opens a dialog "end program"...
  > We noticed only after the installation of Service Pack 3 on all machines, so I don't know if the problem was present before SP3 has been applied

  Problems could be caused by Win XP SP3. I've read several times that SP3 could be not entirely compatible with drivers or 3rd tools
  So I guess there is a problem of compatibility between the exe and SP3 files.
  By the way; SP3 is not completely released and updated test!

  I installed SP3 for some tests on my old non-Toshiba laptop and my work LAN card didn't so it of really possible that SP3 causes this.

  > There are two likely choices for this in the msconfig startup list: thotkey and TFncKy. Disabling either of these programs, the disappearance of the problem, but the functions of the Fn keys are lost

  It is clear that the thotkey and TFncKy files belong to applications that control the FN keys, SO if you would disable this in msconfig then buttons would not work.

  So, a solution might be a removal of SP3 System.
  In addition, you should try to clean the registry and operating system using the free tool like CCleaner.

  > Hope to get a response from an engineer from Toshiba, if there is no monitoring of this forum.
  I hope this too, but it seems that this forum is only a user forum.
  So if you want to report this behavior for laptop, contact the Toshiba ASP in your country

  See you soon

• Satellite Pro L300 will not connect to Wifi after hibernation

  Hello

  can someone there help me please?
  I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

  The only way to do it is to restart the pc.

  Any suggestions?

  Hello!

  I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

  In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you run the factory settings or you have installed a different version of Windows?

  Good bye

• Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

  * + Hello + *.

  I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
  Already everything works because I had a compilation of drivers copy of the past.

  The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

  So I tried with the power that said safety program to:

  Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
  And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
  Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

  So, how to control the peripheral power turn off on?

  Bq. * + thanks for your attention and patient. + *

  Hello

  Firstly the Toshiba Power Saver requires the installation of the common Module.
  The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

  So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

  In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
  Is the laptop supports the Intel wireless network adapter?

  AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
  Check it!

• Re: Satellite Pro L300-EZ1523 - FN + F8 does not

  Hello

  I have the Toshiba Satellite Pro L300-EZ1523 on win xp pro os, I installed all necessary drivers, including the hotkey utility, all work perfect, but funtion FN + F8 switch wi - fi does not.
  How cen be the problem? What is some difficulty for whom?

  Kind regards!

  Obviously missing something. To work well the FN feature, you must install all the necessary stuff from Toshiba. Most important for utilities and tools Toshiba is common modules. Is is kind of basic application and all others must be installed later.

  Make sure that you have installed the utilities and Toshiba hotkey utility. I don't know how you installed everything it and what facilities order you used but please check again all the specific tools of this Toshiba.

• Satellite Pro L300-1FL - WLAN network adapter does not exist

  Model: Satellite Pro L300-1FL (PSLB9E)
  Operating system: XP Pro SP2
  Wireless card: PA3616u-1mpc (atheros AR5007)

  the laptop came with pre-installed vista, everything worked very well (including wireless), although a little slowly, but decided to downgrade to xp. integrated SATA drivers into my xp with nlite installation disc. XP installed fine. visited the toshiba support site and downloaded all the drivers for xp and install.

  Despite the installation of the wireless driver there is still no present in the wireless network card device driver. It is an "unknown" device listed, which I think is the wireless card.

  at first I was not sure what card appeared so systematically installed that all options of wlan of the toshiba download page [intel/atheros/realtek], none has worked. little more digging autour and discovery was a then reinstalled atheros atheros wlan client on the toshiba site. still did not work. found a update atheros ar5007 driver installed, still no joy.

  forward wireless switch is on [the orange light] and has been throughout the process. have you tried enabling / disabling fn + F8, which doesn't do anything.

  I think I read somewhere (having read much too many post on this over the last few days!) that update the BIOS to version 2.4 can solve the problem. However the version offered for my model by the toshiba page BIOS update is 2.1 (which I've updated when you install all drivers in xp) and I'm not that eager to update the BIOS to a version that is not supported by toshiba, because I have no idea how fix an incorrect BIOS prevents starting the computer.

  When you look at the BIOS option "wake we wireless" is grayed out and not selectable. There is no other network without wire/related parameters. This might infer that the BIOS does not recognize the card wireless for some reason any. whereas he should have before, I started to lose its time, as worked it fine under vista wireless. so I think that upgrading the BIOS might have broken, although I can't be sure that I've updated the BIOS until I realize that the without wire did not work under XP, so it could have been broken before the BIOS update. Does this sound plausible? also, I have no idea how if is take to solve this - you can downgrade the BIOS?

  any help greatly appreciated - have been pulling on my hair for 2 days now and there is only so much googling, you can do before find yourself you constantly re - visiting the same sites over and over again!

  Thank you

  ~ andy

  worried that he may have been conflict for different drivers wlan I had initially installed, so have done a complete re - format and re-installation of xp. Install the drivers, including the wlan driver atheros. but still no adapter wlan in Device Manager.

  the unknown device in the other section of the Device Manager is listed as an ethernet controller; However glancing upward from the PCI/VEN # (C & DEV_001C 168) on the basis of data from the provider PCI identifies that this is indeed the atheros card.

  This means that it is not a hardware/BIOS problem as I previously suspected. XP can 'see' the device, but for some reason, the driver won't work. Hmm

  someone at - it had a similar problem? is it just a matter of finding the "correct" driver

  Thank you

  ~ a

• Realtek RTL8187B is not recognized Vista - Satellite Pro L300

  Hello

  I have a Toshiba Satellite Pro L300. It came with vista but I upgraded to 7.
  Now I have installed Vista with all the drivers but there is a problem, the wireless card does not work (RTL8187B) I get to a point that the Device Manager recognizes it, but says he has a problem.
  I downloaded several versions of the driver but nothing. If you could send me an earlier version of the driver or a vista recovery disk that I would be really grateful.

  Please help me that my only hope is to pray...

  I put t don't know what drivers you downloaded but please use portal Toshiba WLAN driver - http://aps2.toshiba-tro.de/wlan/

  He has to work.

  By the way: what type of problem is listed in the WLAN card properties?