Qosmio G20-110 with Vista-> cannot transfer files to SD card

Similar Questions

• Cannot transfer files to an external hard drive to a second and the error is "error copying file or folder. "Impossible to copy ' file/folder name.

  Original title: cannot transfer files to one external hard drive to another

  An error message is displayed: "error copying file or folder." Impossible to copy "file/folder name. "The destination folder is the same as the source folder.

  Peter Tiedemann

  Hi Peter,

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to transfer files from an external drive on another drive. Please let me know if this isn't the problem that you are experiencing.

  Before troubleshooting, I have little information on the issue.

  1. Do you receive any error or display message?
  2. Did you recent hardware or modifications to the software on the computer before this problem?

  Try the methods and then check after each method:

  Method 1: Transfer files from a drive to the location on the desktop or a temporary folder and then try to transfer them to the destination disk.

  Note: make sure the free space on the disk in the destination drive.

  Method 2: Run the Fixit:

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 3: Disconnect your player safely, and restart the computer. And then try to transfer the files.

  If the problem persists, post your reply with results and questions above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Specification of the RAM for Qosmio G20-110

  What spec ram do need me for a Qosmio G20-110?

  Your Qosmio can be upgraded to 2 GB upwards and you can use follow Rams:
  DDR2 400/533 MHz 512 MB (PA3412U - 1 M 51)
  DDR2 400/533 MHz 1 GB (PA3411U-1M1G)

  Good bye

• Upgrading RAM in the Qosmio G20-110

  What is the limit of RAM upgrade in a Qosmio G20-110? Right now I have 512 MB. Can I put it in 1512, by adding 1 GB in the extra slot?

  Of course you can do it.
  The laptop is able to manage 2 GB max memory (2 x 1024 MB)
  You can mix the modules I mean that you can use for example 1024 MB and 512 MB sizes.

  I also found the compatible modules on the Toshiba options & Accessories site.
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• I set up ftp in iis for the file transfer. On the pc that I am currently in place I cannot transfer files to it via ftp. He says that the password is not accepted.

  FTP problem

  I set up ftp in iis for the file transfer.  On the pc that I am currently in place I cannot transfer files to it via ftp. He says that the password is not accepted.  When I look in the properties of the default ftp sites ftp I noticed that the Directory Security tab is not there as on the other pc.  How to return this tab or is it the windows software that's not fair.  I am running windows XP 2002 SP2 on it and I've updated to SP3.  I have no idea.

  Hello

  I suggest you to send your query to the link for assistance.

  http://forums.IIS.NET/

• Cannot use the HD on Qosmio G30 drive with Vista OS

  I installed Vista Ultimate on my G30-102. End Ali adapt when I try to use the HD player software. Get the following message:-"unable to output the video to an external device. Please switch display you device by pressing Fn + F5 keys... »

  I'm not trying to use an external device/monitor

  Saw another thread talked about this, but no response. Any help would be appreciated.

  Hello

  Have you bought this laptop with Vista or did you install it manually?

  On the Toshiba driver page, you will find a more recent version of the HD DVD player.
  This time it s a 3.51.06 version for Windows Vista released on 03/08/07.
  Try to update this player and the graphics card driver!

  I wonder if it helps?  :|

• Cannot transfer files between multiple PCs.

  I have 4 PCs; One with Windows 7, two with Windows Vista and one with XP.  I want to be able to transfer files between all four of the PC.  90% of the time, the Windows 7 and Vista systems cannot see the XP system in their network lists in the file Explorer.  Very frustrating.  All the PCs are in the same workgroup.  All have their hard drive to allow others to share and change the permissions.  I is almost as if mother Microsoft won't allow that to happen.  GRRRR

  Everything good must be approached to this VERY annoying problem?

  Hello

  What antivirus/antispyware/security products on machines do you have? Be one you have NEVER
  had on them, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  Some of them can cause network problems and sometimes you need to uninstall one instead of just disable
  be able to catch him as the primary cause.

  ---------------------------------------

  Check with your router manufacturer's online help (most have excellent help) and their firmware on your router
  model - also check with their forums for possible known problems.

  ---------------------------------------

  Most of these problems is associated parameters and driver. Be careful with trailing spaces when you enter in the
  data. XXXX and xxxx_ are not the same (where the '_' represents a trailing space which is invisible). The best
  way you ensure to remove the spaces to the right is to enter data and then go back up to the last character. See #5
  below.

  ----------------------------------------------------------------------------------------------------------

  Follow these steps for all machines:

  It's my generic instructions for the correct driver updates: (you want mainly to update NETWORK and WiFi card drivers).

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  =========================================

  Leave a message from Bob Cerelli:

  The bases for troubleshooting are:

  1. make sure that you have the same (e.g., 192.168.0.x) intellectual property regime.

  2 make sure you have the same mask subnet, gateway, and DNS IP addresses.

  3. make sure you can ping the IP address of the other computer. Failure, just to test, make sure that you disable XP as well as any other firewall.

  4. make sure that you can test other computers by name.

  5. make sure that you have the same workgroup name (note the spaces)

  6. for purposes of troubleshooting, turn off XP and completely uninstall any other firewall software. You can always add more complexity once get you it working.

  7 with XP, make sure you have the same user name and password that the person by connecting to other computers. The default setting for XP Pro is to require a password for network access.

  8. more than details about how to network XP can be found at:

  WindowsXP - LAN
  http://www.onecomputerguy.com/Networking/xp_network.htm

  9. information on how to network Vista is located at:

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  =========================================

  More help on these sites:

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  101 home computer networks
  http://compnetworking.about.com/cs/homenetworking/a/homenetguide.htm

  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Cannot transfer files from iPad to MacBook

  Personally, I understand better than anything else of directories.   I guess that when you connect the iPad to the MacBook using the USB connection - you cannot move pictures as you would with any other device connected as a drive.

  Okay, so what now?

  I was with my iPad to take shots (my first mistake).  Due to the number of falls that I ran out of memory and it stopped everything - now I do not know how to remove the iPad videos and placed them on my MacBook.

  At first, when I plugged the iPad for the Macbook using the USB I had an application that seemed to allow you to "import" - I did.  Or do I think that I did.   Where it matters to I don't have any idea.  Directories of meaning for me - but whatever the application is - I had zero indicating where the photos/empty went.  I've been good with that - thinking I could use the find command to locate my videos at a later date.

  But now this mysterious request automatically don't invoke not himself.   = / I cycled the power on my iPad - with no luck.

  I've heard that iTunes could be a portal for the transfer of files form an iPad with other devices.   I opened iTunes on my MacBook with the iPad connected - but nothing obvious jumped out to me (as a directory) that allows me to easily move these videos.

  I guess I should buy some type of camcorder.

  In any case - if there is a simple way to transfer files from an iPad to a Macbook (for example a directory) then let me know.  I'd appreciate it really.

  Thank you

  Please understand that I want to say this quite constructive feedback.  I suggest a change in your way of thinking.

  silver_mica wrote:

  Personally, I understand better than anything else of directories.

  I suggest that you leave the point of view of directory at the door when you work with an iPad and a Mac.  Apple devices tend to use directories to answer the question 'how', something is done.  But the "how" may change from time to time.

  However, if you focus on 'what' to do (for example, move pictures to the iPad for the Mac), you'll realize the functions (applications) on both ends that manipulate your data.

  On the end of the iPad, this app is Photos.  And on the side of Mac, that request is probably too Photos - assuming that your Mac operating system is up-to-date.

  So, check in the Photos of the Mac app and see if your photos are here.  Absolutely, do not worry about the Photos app directories used to store these photos.  If you need to send them elsewhere, export Photos of Macs.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

• Qosmio F20 - 111et Windows Vista - cannot get sound and driver to the display work

  Dears

  I just installed windows vista Home premium 32-bit, but I faced with 2 main problems, which are:

  1 - sound:
  2 - GO 6600 128 MB graphics card

  I found the driver for them, but it did not work so I need help you please.

  Respect of

  Hello

  Unfortunately, I have not Qosmio G20 but if you use option search on this forum, you can find interesting topics on Vista on Qosmio F20.

  For the test of its http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24004

  Display, maybe this will help you http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21823&messageID=80423

  Make sure that the BIOS is updated to the latest version.

  Bye and good luck!

• Cannot transfer files to/from the USB device after upgrade to 6.0

  After update MM I can't transfer the file of/device USB using the Commander file, Astor or any other file manager, also is not in this apps, I can access content outside of these applications, but cannot copy or paste something!
  I tried different types of USB storage even question!
  Did I forget something?
  Help please my world depend on this, can't use the laptop whenever I need to transfer files...

  I bypassed this problem by downloading a new app from File Manager - File Explorer ARE pro. Able to copy and move files with it.

• Qosmio G20-123 with two questions (WIFI AND ELECTROSTATIC)

  I BOUGHT THE QOSMIO G20-123 ON 30 OCTOBER 2005, FRANCE.
  IT'S THE SECOND QOSMIO I (I BOUGHT THE FIRST QOSMIO G10-126 OF FRANCE IN JANUARY 2005 AND IT WORKS PERFECTLY FINE). NEEDLESS TO SAY THAT I ONLY BUY TOSHIBA BRAND FOR MY LAPTOP SINCE THE YEAR 2000.

  UNFORTUNATELY, THIS NEW QOSMIO G20-123 HAS TWO PROBLEMS.
  I WILL ADDRESS THE TWO ISSUES AND THE RESPONSE THAT I RECEIVED FROM TOSHIBA LEBANON (WHERE I LIVE) I HAD THE EXPERIENCE AND THEY HAVE VERY GOOD TECHNICIANS AND SERVICE.

  FIRST PROBLEM: WIFI CONNECTION
  I HAVE THE APPLE AIRPORT EXPRESS AS ACCESS POINT, WHEN I CONNECT THE QOSMIO WIRELESS ACCESS point IT STARTS WITH a SPEED OF 54 Mbps THEN IT COMES down to 1 Mbits/S.i. HAVE to PRESS THE BUTTON REPAIR so that the speed is up to 54 Mbps, and then a few minutes later, it comes down again once at 1 Mbps.
  SO FAR I HAVE NO RESPONSE FROM TOSHIBA ON HOW TO SOLVE THIS PROBLEM.

  SECOND PROBLEM: FIELD ELECTROSTATIC AROUND THE SCREEN

  WHEN I TOUCH THE METAL OF THE LCD FRAME, THERE IS A LOAD ELECTROSTATIC, FLUCTUATING TENSION ALL AROUND.
  IT SEEMS THAT IT LACKS A PLUG OF EARTH (EARTH) SOMEWHERE... I'VE EVER SEEN AN ADAPTER TOSHIBA WITH A SHEET CONTAINING 3 HEADS (EARTH).
  SO FAR THIS PROBLEM TOO HAS NOT BEEN RESOLVED.
  ALSO AS I MENTIONED HIGHER, MY OLD QOSMIO G10-126, WHICH IS PLACED NEXT TO EACH OTHER, USING THE SAME ACCESS POINT AND THE SAME ELECTRICITY INTAKE, AND IT WORKS PERFECTLY WELL WITHOUT THESE PROBLEMS. WHAT SOMEONE HAS THESE PROBLEMS?
  CAN YOU HELP ME SOLVE THEM?

  Thank you
  MARCEL

  Hi Marcel

  It would be very interesting to know what type of card your Qosmio WLan?

  Concerning

• Cannot transfer files (.doc, .pdf, .xls, etc.) to the Xoom on WinXP SP3

  At home, I have Windows 7 and have only minor problems, file transfer to my Xoom. I invited to Skip, Skip All, ignore, etc. but only am allowed to still transfer files.

  My question is at work on my WinXP SP3 machine where I want my Xoom transferable working documents for when I travel. When I transfer, I get a prompt similar to Skip, Skip All, but no option ignore and continue to transfer, only to cancel. Since Mico SD card does not right now, I need a way to sync my Xoom upward with my working files.

  Someone has an idea? All my research was unsuccessful.

  Download WMP 11 and restart

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

• With CVI to transfer files to cRIO 9066

  Hello

  I'm trying to copy files to a directory on a cRIO 9066.

  The method I use is to map a drive in Windows 7 and I want to copy the files with the CopyFile function in CVI.

  The reader is defined as \\ni-crio-9066-030c6bf1.local\files (I also tried http://ni-crio-9066-030c6bf1.local \files).

  With this method I can transfer files on this disc with the CopyFile function, but the transfer rate is extremely slow.

  For a 300 KB file, it will take about 25-30 years.

  During this time, my request is breaking, there is no more values in the controls or the UIRs until the copy is complete.

  I tried to disable 'Automatically detect settings' in Internet Explorer in tools > Internet options > LAN settings > connections as I've seen in a knowledge base (http://digital.ni.com/public.nsf/allkb/4EBE45E8A816B19386257B6C0071D025).

  The copy is much more rapid 1-1, 5 sec but I have a few failures of transfer. Windows told me that the transfer failed in a popup, the file in the cRIO is a file of 0ko (and CopyFile returns an error).

  In the knowledge base, they warn about the failures of transfer but I was hoping to get an error code in the CopyFile function.

  I also tried to run cmd.exe copy 'name of the source file' 'target file name' with LaunchExecutableEx but I got the same results.

  I'm in a dead end for now.

  Do you have any idea how I can transfer files between CVI and the cRIO?

  PS: I tried the WebDAV protocol in Labview and it seems fine with that (good transfer rate and no failure of transfer). But I did find this library in CVI.

  Thank you for your help.

  I'm sorry for my late reply.

  I managed to send files in the cRIO 9066 via FTP.

  I installed 'Legacy FTP Server' on the cRIO and I used the FTP API in CVI (proposed on the french forum and by the regulation).

  This solution works very well.

  I didn't want to use an external if possible API so I chose the FTP solution.

• Iconia 8 cannot transfer files to the formatted Sandisk MicroSD card fat?

  Iconia 8 cannot transfer pix or formatted data to 64 g. Sandisk MicroSD card fat files?    Any way difficult?

  I tried to reproduce what you experience on the device, but have been able to copy files on the SD card without any problems successfully. How do you try to move the files? I didn't go in Astro Manager of files, search for a file on my Tablet and tap and hold on the file and select copy. Then, I went to the SD card in Astro, the directory I wanted to copy to and you click on paste. You can try and see if it works? If this is not the case, my best advice would be to try another SD card.

• Cannot transfer files account childs

  I'm the administrator of our PC. I am unable to transfer files from my account to my childs account, so that it can access it. When I try (while connected to my account) a box pops up saying something like "need you permission to perform this action."

  Jen

  Hi Jensheridan,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you can't transfer files to another account and the error message 'need permission to perform this action. "

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  1. how you transfer files?

  2. What is the file format?

  I suggest to take the permission of the file and are trying to transfer the file.

  See the article.
  http://TechNet.Microsoft.com/en-in/library/cc753659.aspx

  See the article for more information.

  What to know before applying permissions to a file or folder
  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with transferring files, I'll be happy to help you. We, at tender Microsoft to excellence.