Qosmio G20-120: MCE - TVcard does not

Similar Questions

• Qosmio G20 - CD/DVD drive does not burn

  Please can someone help?
  I rebuilt my qosmio g20 and the thing what it is great except my cd dvd player that plays audio and video but simply will not register.

  When the folder now, he says no. RECORDER and when I click on check for other readers of anything.
  Select record is selected. Before the reconstruction, it all worked but did not.

  I have nero has always worked well even with the sound stuff installed. So I reinstalled nero and nothing.
  I tried to delete the upper and lower entrances in regedit, which is a common difficulty that offered among various forums but nothing again.

  Sick as a parrot, so glad of any help here... Thank you

  Hello

  It's very strange
  Have you tried to reinstall the OS again?
  Try this.

  I recommend also to remove the CD/DVD drive Device Manager, then restart the laptop.
  Usually the operating system should recognize the drive of the CD/DVD device correctly and must reload the driver again.

  I see you are using Nero burning ROM. I know sometimes the BONE can be confusing upward if several burning applications are installed.
  So remove the sonic software and use only one. Nero.

  Best regards

• Qosmio G20 - its Media Center does not work properly

  I do not often use the TV tuner, but when I went to save a program of the week last I found that I was getting loud hissing and sound distortion. Although I could play back a few straight recorded music.

  I ran the TV Tuner, settings and which seemed to cure her.

  I wanted to watch this program and I found that I was getting the loud hiss once again and when I run the program saved it seems to run fast. But now recorded music also does not work.

  I ran settings again but no difference this time.

  I open the Volume control window

  Adjust balance on volume control and hissing on the channel left and music distorted on right channel - running pitch fast and high.
  When the track ends then the hissing sound stop

  If I set the controls of the wave
  Keeping your balance no effect now, whistling on the left and right
  Adjust the volume affects track music, but no effect on the whistle until right down when he cut the sound it
  MUTE button mute puts the two

  Registering the program is OK if played using Windows Media Player.

  Any suggestions as to what could be bad?

  PC running Windows Media Center Edition

  Windows all sounds have been affected, that is when I ran some of the Windows Panel I just got a burst of noise. As soon as I closed the library was back to normal

  Martin

  Post edited by: mbriscoe

  Hello

  I m not 100% sure if I understand the problem correctly, but it seems that the problems of sound appears only when you use and play audio files with Windows Media Center.
  The sound is ok, when you play Windows Media Player. Am I wrong?

  Hmm maybe, there is a registry or application malfunction.
  Try to update the TV tuner driver and audio driver.

  You can remove the sound card in the Device Manager and after reboot, install the latest version of the sound driver.

• Qosmio G20 - new HARD drive does not work

  I have a G20 and try to change one of my hard drives of 60 GB for a new 250 GB (Western Digital WD2500BEVS, SATA-150, 5400 RPM).

  First thing I would add is that the hard drive is fully discoverable, formatable, and usable in my desktop... but in my G20s it only detects it in the BIOS but has a status of 'impossible' and my operating system (XP) can't quite see.

  Please can someone help?

  Hello

  You've got a 60 GB and a 250 GB HARD drive in your Qosmio G20.
  Is this good?

  What RAID settings do you use?
  You can check the settings in the BIOS and in the user manual, you will find some details about the RAID.

  If the RAID is defined on the mirror then only the HARD drive would be available and if the first HARD 60 GB disk is then the other HARD disk would also provide ONLY 60 GB even if it s 250GB

• Qosmio G20 - CD/DVD drive does not read disks

  Hello world

  I use the G20, which is not able to read DVD/CD other than Moose
  the DVD I burned using the same player is not able to read again when I insert it.

  Can someone help me solve the problem?
  If any other question for the brief ing the question can be posted to will answer.

  Thanks in advance

  Hello

  The problem looks like a compatibility problems between the CD/DVD player and the discs used
  I had this problem several times, but since using the disc TDK R questions is never appeared again.
  So I agree with Luke and recommend that you try other discs.

  In addition you must remove the Upperfilters and Lowerfilters completely from the following registry key values: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Good bye

• Qosmio G20-120 has a built in mic or not?

  Hey all,.

  I'm getting conflicting information, the Qosmio G20-120 it comes with a built-in microphone or not. I have seen on some sites, it does, and others it says no. I bought one and I'm looking and typing on it now, but can't seem to get built into the microphone to work, i.e. If there is a.

  There are certainly the slot for him, and the advertisemnt for her, she refers to the area that it is in. However, he built in mic or not?

  Thanks for the help
  Matrixum

  Hello

  As far as I know the audio internal Microphone is not available on the Qosmio G20-120.
  You can connect an external microphone to a microphone which is placed on the left side of the device.

  Good bye

• Gray glittering color screen on Qosmio G20-120

  Hello
  I have a problem very confusing with my new Qosmio G20 - 120.
  I can see vague and wink on my screen when the brightness is set to 2 or 3 levels under the maximum, and the background of the display is set to dark grey (or other color non-black)
  This effect disappears when the brightness of the display is set up, but you know, I can't work with the maximum brightness all the time, because my eyes get tired very quickly in this case, especially in the evening.
  I saw the other G - Series 17 "notebooks and noticed the same problem.
  Is it possible hardware problem or this is common for Qosmio 17 "poster?

  Hello

  I never heard the show. The fact is that you can change the brightness of the screen on many laptops Toshiba, but I've never heard or seen of wave or nod to the screen. I m not sure if it s only your vision or it s a really a display error (FL-UPS).
  If you are not sure of the fault, then take the unit to your local dealer or contact the service of Toshiba.

• Qosmio G30-155: video Capture does not work using s-video in port

  Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
  Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

  In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

  It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

  Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

  Can you please explain what you want to do exactly?

  Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

  To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

• Qosmio G20-120 - disabling audio?

  HY can someone pls me say how can I disable the audio chipset of my qosmio g20-120 portable? I want to buy a card its audigy pcmia for my system surround logitech... thx allot

  What? How to disable the audio chipset? Did you mean the sound card?
  The sound card device, you can simply disable it in Device Manager.

• Qosmio G20-120: not able to watch DVDs

  Watch DVD movies cannot be because of the following strange problem.

  When I use WMP I get message wrong Copyright (with all the DVD movies), for all other programs (WinDVD, AnyDVD) it is black screen and some sound problems.

  I tried to re - install WMP and WinDVD, but there is no result.

  If you have problem like similar advice.

  My OS - WinXP Prof SP2
  Model - Toshiba G20 - 120

  Post edited by: AdamK

  Hello

  Nice to hear that.
  Thanks for the info.

  Good bye

• Qosmio G30: Cam Sony MV does not work with port IEEE 1394

  Qosmio G30-117 does not support my Sony DCR-IP5E (a micro video camera) port ieee 1394. I tried to use pinnaccle studio 9 and video ulead studio 10, but I could not see my cam because of these programs.

  There is no problem if I install a new win xp media center edition (retail pack) and CDTOOLS drivers. But I want to use my setup of the Qosmio factory, I don't want to buy a new win xp media center edition.

  How can I solve this problem?

  Thank you all.

  Hello Amon

  I tested it with Qosmio G20 and my Sony camcorder using the same port.
  I tested it with Windows movie maker, WinDVD Creator, Adobe Premiere and Ulead Media studio Pro 8.

  You may believe, but each application was able to see my cam and I copied movies on the HARD drive, edited and created DVDs. I don't really know what is happening in your case, but when you connect your switch cam on game mode, and the cam must be recognized as new hardware and listed in Device Manager.

  When it works well to start the applications and check again.

• Re: Qosmio F30-131: remote control does not not with Vista Ultimate

  Hello!

  I just installed Vista Ultimate but my remote does not work.
  I reinstalled everything in the right order as written in the command file install on Toshiba Homepage but its always answers don't not under Vista.
  I can just turn on my laptop when its off the remote control.

  Anyone know what to do?

  (PS: I do not have my Toshiba restore CD for Windows XP MCE)

  Hello

  You reinstall the remote control manager? This utility enhances support for a remote control on your computer.
  How about Value Added package? There is a new version available. Try to update it too.

  But back to the basics, the Qosmio F30-131 belongs to the series of PQF30E. Did you choose the drivers for this series?

  However, this laptop has been delivered and pre-installed with Win MCE. Can this remote works only with the XP version of Windows Media Center.

• Qosmio X 70-A - keyboard does not work properly

  I have a Qosmio X 70-A-12N, newly purchased last September, 8.1 Windows 64-bit.

  After working properly (and lots!) for half a year, the keyboard started to stutter.

  If you type a paragraph or two, with say 250 words, each time and now, to say that every 10th or 20th Word (undpredictable), a key shot does not work. I tried another keyboard via USB: no problems, so it has to do with the built-in keyboard of Qosmio.

  It is not specific keys, and it is not the pressure with which you press the key.
  Any key can be be ignored from time to time.

  All drivers have been updated to the latest questions, the BIOS is 1.50.

  It seems that the problem is more important when working on the battery (not sure).

  Is it a software or a hardware problem? Should the keyboard be exchanged?

  My first thought was last updated from the BIOS, but according to the Toshiba download page you have latest version of the BIOS.
  You know that's not easy to say what the problem is here. I can't say with certainty if there is a problem with the keyboard, but maybe you should contact the nearest Toshiba service provider, explain the situation and ask for help.

  They know what needs to be done. at least, they have very good diagnostic tools and it is possible to detect the problem.

• Qosmio X 300 - 11W - TouchPad does not work in mode 'sleep'

  TouchPad does not work in mode 'sleep'. I can't wake up my computer using a touchpad. I downloaded and installed a driver for Windows 7 32 bit from a page of the Synaptics driver, but it did not help.

  Can you wake up your Qosmio using the power button / stop?
  You close the lid when the laptop enters the sliding mode?
  After you open the laptop lid should wake up. It work correctly?

• Qosmio G50 - Fingerprint log - it does not work

  I had to reinstall the software (like new) on my Qosmio G50 due to problems. (vista 32) Reinstall the fingerprint logo does not work and he keeps asking mr to register my fingerprints, when I try to do, he says can't open database specified. No idea how to get back on that.

  I tried to remove and don't reinstall, no luck
  I tried the fingerprints of delete on the settings in the event of corruption, it will not.
  Any help would be greatly appreciated.

  See you soon

  Here's a very interesting FAQ from Toshiba on how can you remove the fingerprints fingerprint reader?

  http://www.MyToshiba.com.au/support/items/FAQ/386

  Please post comments if you can remove fingerprints already recorded using this documentation