Qosmio G20: No signal to the Portugal TV

Similar Questions

• Qosmio G20 102: problem RAID the installation of windows xp media center

  First of all I did not the raid driver for my qosmio. I tried the RAID of Qosmio G20, another pilot but when it reached the stage when I ask windows to format the C driver it shows me an error. It is said that there is an error in the KR10N file and it stops there.
  Please help me and thank you.

  Hello

  It seems that the Qosmio G20 102 belongs to the series of PQG20E.
  Research on the European driver Toshiba page I found the RAID for Windows XP MCE driver v1.03.0008 (can also be used with XP Pro).

  You will need an external USB FDD to include this driver in the operating system.
  But note; After installing the RAID driver you shouldn't t format the HARD disk or create a new partition, because that will remove the RAID driver from the HARD disk and installing the OS fails!

  I hope I could help you would also appreciate a feedback ;)
  Best regards

• Qosmio G20 - could not get the video to display on the LCD screen

  I have a laptop Toshiba Qosmio G20, running Windows XP MCE.

  The DVD player on board isn't sounds very well so I thought I would plug an external DVD drive to expand its use. After a lot of internet research, I finally found how to do this. Here's my setup.

  Using the monitor port I used the adapter 3 RCA jacks. (There is no S-video on the DVD drive and an adapter did not work). I finally discovered that in order to get the image on the screen, I have to use Fn + 4. Now, here's where I'm having the problem. I can't get the video to display on my external LCD. FN + 5 didn't do. The monitor is an I - inc AH191D and is connected by VGA cable. There is no driver other than the one for the VISTA operating system... That is why it is not anywhere in the Device Manager.
  Here are the settings I use in order to have all that shows on my desk, shows on the monitor.

  In Control Panel open to the screen. Properties
  Number chosen 1 - multiple monitors GeForce Go6600 video card...
  Advanced under
  the GeForce G06600 tab,
  nViewDisplay Mode: clone 1 a 1 b
  The main screen: digital flat screen
  Secondary display: AH191

  I also tried using the properties of controls on Toshiba. He says under TV output TV output but gives options of the program, but I don't know what I would use. Any ideas out there?

  Wait I'm confused, if you try to send the output of your external DVD drive in the laptop, and then display the image on an external monitor attached to laptop?

  If you use the DVD player on your laptop, it will be good quality S-video as a signal of low resolution.

  Is there something wrong with the DVD player?

  If it's just the DVD software you don't like, you can download other DVD players. PowerDVD is excellent, its better than WinDVD and other players in my opinion.

• Qosmio G20 - Blue LED for the volume does not work on Windows 7

  Hello

  I have a minor problem. Yesterday, I update my Qosmio G20 on 2 GB of RAM and I have install Windows 7. Everything works fine even better than XP, but I notice that my blue led lights for volume no longer works.

  Is there a driver I need to install or any solution that these blue lights for the volume can function again?

  Hi Gabriel,

  I m not Qosmio G20 owner but I m asking you to install Windows 7. I think XP would be the best choice for this portable little plu

  Normally the lighting on Toshiba laptop to install the package of added value. It s is only not for this model, so I put t know if it will work. You should try to download from another model of laptop that is Windows 7 supported.

  In addition also check the BIOS if lighting is enabled.

• Qosmio G20: cursor jumps typing the letter

  Hi everyone, my Qosmio G20 gives me headaches! When I try to type a letter or article suddenly the cursor jumps back lines and I find myself typing in the middle of a previous sentence. Then sometimes it just deletes a paragraph I just typed.
  Any suggestions as to why? And more importantly on how to behave?
  I would be happy to advice.

  Thank you.
  Ronnie

  Yes, it's because of the touchpad. To disable and enter in peace, just press Fn + F9. This will temporarily disable the touchpad. When you are finished typing, press Fn + F9 again, it will re-enable the touchpad.
  Later,.

  Alcahest

• Qosmio G20-114: what are the features of hard drive?

  I just deleted one of my harddrives to my G20 114 so that I can work on my data while my laptop was being repaired.

  My plan was to put in a case of hard drve 2.5 "usb. I was also going to use a spare hard drive 100 GB I need to act as a backup of the operating system drive.

  However, it seems that the arrangemnt pins on the drive, I removed from my Qosmio is different from what I'm used to and it does not seem to hold in the external box. I guess also for this reason that the spare drive I used to fit into the Qosmio. I guess I must be missing something as this may not be the case here. They use some sort of different player in these machines or have I forgot something obvious?

  Thank you very much

  Hello

  AFAIK the Qosmio G20 was delivered with S - ATA drives.
  The HARD drive is fixed by 4 screws on the HARD drive carrier.
  Did you remove this media from HARD disk?
  This is perhaps a question why the HARD drive does not fit into the case.

• Qosmio G20: How to format the HARD drive?

  Hello!

  I bought Qosmio G20 last week and now I want to install Windows XP MCE (not recovery, but a CD in Windows XP CD) on this subject but I have a problem formatting of hard drives. There are two hard disks, and when I try to put in the form of Win 98 it is said as "formatting is not supported on C:" or "formatting is not supported on D:". I want to do before installing new windows because I want to create multiple partitions, but to do that I need to format the disc first.

  Can someone tell me what I need to do to format discs in this way?

  Hello

  You cannot format the HARD C drive because the operating system is running on this HARD drive.
  What you can do is to use the 3rd party software that creates the partitions on the HARD disk on the system running. I use partition Magic 8 to create and manage partitions.

• Qosmio G20-139: failure of the DVD - D: is not accessible

  Hi I have a six month old Qosmio G20-139
  without warning I can't access my DVD player now. No disk will not work and the message: -.
  "D:\ is not accessible. The request could not be performed because of an i/o device error"

  I ran that the pre installed Toshiba diagnosis which confirms the failure
  I went through the process of the device without result Manager
  Any thoughts?

  Hello

  Have you tried to remove the drive from Device Manager?
  If this is not the case, try to do this and then restart the laptop.
  After restarting again the operating system should recognize the drive again.
  Check if it helps.

• JBOD Qosmio G20 - could not initialize the disk of 320 GB - 1RAID-0

  Hello, comrades Toshiba users,
  at first, I apologize if this question has already been answered, but I did not find the answer to my problem.

  One of my colleagues has a Toshiba Qosmio G20 with two 80 GB drives. Big 17-inch "surf-board-sized" computers laptops are not my cup of tea, but the Qosmio him quite well served.
  We tried to upgrade the two hard drives of aging in his laptop. With considerable experience in replacing the readers of the laptop, I didn't expect no particular surprise, but I was wrong.

  We tried to replace the original disks
  Bay 1: 80 GB Fujitsu drive, System
  2: 80 GB Fujitsu drive, data, RAID off the coast of the Bay

  with the new
  Bay 1: 320 GB WD Scorpio
  WD Scorpio 2: 320 GB drive Bay.

  The BIOS of the G20 is v1.30, the latest version. It recognizes new readers-, but one of the new marking as 1RAID-0 disks fails. After trying to "initialize" the 320 GB drive in bay 1 as 1RAID-0, on the third page of the G20 of BIOS, there is a disk activity, but the drive remains in JBOD mode.

  Unable to mark the drive of 320 GB 1RAID-0, I am unable to use the 320 GB drive as a system disk.

  If the original system drive is cloned on a new 320 GB drive, that it does not start. Starting XP * begins * but subsequently fails with STOP 0x7B - in other words, the infamous blue screen INACCESSIBLE_BOOT_DEVICE when the Toshiba RAID driver is loaded during Windows startup.
  Plain vanilla CD, of course with slipstreamed windows installation driver Toshiba, impossible rest. Installing Windows don't "see" drive in Bay 2.

  When the drive system is put in the high Bay and G20 is started from it, Windows XP starts correctly. The drive in Bay 1 is accessable from Windows, however, remains offline in the RAID from Toshiba console. If the start player in Bay 2 is not an option, too.

  A similar problem, where the owner could not install a system of 200 GB drive is described here
  Link: http://tinyurl.com/38wokw
  The owner, however managed to install a 100 GB drive and we have resorted to 80 GB of disk as a system disk and the only player upgrade in Bay 2 to 320 GB.

  I understand what happens when the disk is 'initialized' in the BIOS. Only brands of BIOS of Toshiba disk 1RAID-0, and it breaks down on 320 GB drive. I will refrain from expressing my opinion on this practice.

  My question is - if it is possible, how * manually * mark the drive of 320 GB 1RAID-0?
  Using a hex editor, dd or something similar is no problem. A partial answer would also know the disc more large size which * can * be marked with success under the name of 1RAID-0 at BIOS G20.

  Thanks in advance.

  Hello

  I m not 100% sure, what could be wrong by presumably 320 HARD drive size might be too big!
  How about the 100 GB or 120 GB hard drives?

  I think you should consider it because usually most of the BIOS supports a HARD drive size limitation and therefore not all sizes are supported.

  But note; using the configuration of 1RAID-0 (striping), met by the operating system size is twice more only if the smaller of the two HARD drives in RAID configuration. Using RAID-0, all data on both disks will be lost, even if it is training of two disks fails.

• Qosmio G20: How to replace the keyboard

  DOES ANYONE KNOW HOW TO REPLACE THE KEYBOARD ON A QOSMIO G20?

  Hello

  I m not an owner of the Qosmio G20, but the replacement of keyboard on the G20 is very similar to another series of laptop.
  If you want to remove the keyboard please follow these steps:

  1.) open view.
  2.) Insert your finger into the slot between the reinforcement of the keyboard and the computer. Then,
  Lift the keyboard bracket to unlock and remove.
  3. remove 1 screw from the keyboard hold the plate.
  4. remove the screws fixing the keyboard
  Lift the upper part of the keyboard and turn down the palmrest.
  6. remove the 2 screws of the plate support keyboard and remove the
  keyboard support plate.
  7 disconnect the cable from the keyboard connector on the system board CN3200.
  8. remove the keyboard.

  All that s

  But note; If you have no experience, please don t remove the keyboard.

• Qosmio G20: How to get the higher screen resolution on monitor external 22 "

  I have a Qosmio G20 and today I bought a Samsung 226BW the external display. The Samsung has a max resolution / optimal 1680x1050px. The manual SAIS the laptop Toshiba supports a resolution of the external display up to 2048 x 1536...

  I tried now all sorts of settings, but the highest resolution I get on the external monitor is 1440 x 900 (-even as the laptop).
  1440 x 900 display 22 '' is not enough for serious photo editing;. It seems simply blur.

  What I am doing wrong? I deeply appreciate answers/comments; because if 1440 x 900 is all I can get, I have to return to the external monitor to the store...

  If someone is so good!
  Espen.

  Hello

  The available screen resolution depends on the graphics driver. You cannot choose the favorite one from the 1680 x 1050 resolution because it doesn t graphics card driver supports.

  Perhaps an update of the graphics driver could help.

  By the way; an inf file must be provided by the manufacturer of the monitor. You can install this file right-click and choosing install.

  Check also these forum discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19570&MessageID=71767

• Qosmio G20-106 - exchange of the CMOS battery

  Hi all

  I need to change the battery CMOS of my G20-106. Is this possible without having to disassemble the whole laptop? Where is the battery? Thank you for your help.

  Best regards

  unclescrooge

  Hello

  No, as I know it is not possible to do
  As far as I know the CMOS is welded somewhere on the motherboard and you would need to disassemble the whole laptop. This can be really, really painful procedure.

  But why do you want to remove the battery?
  The CMOS battery is charged and it should be possible to load it again.

• Qosmio G20 - how to enable the function keys

  Can someone tell me how to activate the function keys? I seem to be entirely invalid.
  Thank you
  Mike

  Hello

  In my opinion one of the important gift of drivers or utilities work and, therefore, you cannot use the FN keys.

  If your have installed XP on your test of the G20 to refresh the Toshiba common Modules.
  It is an essential tool that controls the FN keys.

  The common Modules can be downloaded from the page of European driver of Toshiba.

  Check it out.

• Qosmio G20: After reinstallation of the BT stack everything works fine

  Hello

  I installed the BT stack and everything worked fine.
  However, after restarting my pc (G20) it wouldn't work.
  I had to reinstall (& restart) to make it work again
  Frédéric

  Thank you Frederic for this comment.
  I've seen your first ad here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24541

• Qosmio G20: I miss is the volume knob after XP installtion

  I reinstalled win XP [no original recovery DVD] and I was able to get all the features of work - the only thing that miss me is the volume knob.
  Should which driver I? What is the name of device?

  I installed win xp pro / eng OEM

  Hello

  On the Toshiba download page you can find the instructions facilities document. Please check and make sure that you have installed all of the things listed in the order of good facilities.