Qosmio G30 hums when it is connected to a sound system

Similar Questions

• Qosmio G30 display flickering and cannot connect to Windows

  I have to press F5 to make the visible display each time that I boot. I thought that it was a software related issue and I tried to format the drive with recovery CD original. However, the screen keeps flickering of the stage of the BIOS.
  Now, it's even worse. The screen flashes when the turning on and I cannot Ouvrezunesession Windows MCE after formatted HARD drive.

  After reading the FAQ and related articles, I suspect that it was a problem of graphics (hardware).
  My graphics card is NVidia Go7600. Is this true, and it's a must to change the hardware (graphics card)?

  Appreciate your advice before contacting the local support team.

  Thank you very much!

  Hello!

  That s a strange question. Do you have the same problems on an external monitor?

  If a display is flashing, the screen itself is faulty, the FL tube is the cause of the error. I think that is the best, when an ASP (authorized service provider) checks your Qosmio G30.
  Here you can find one:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good luck

  Good bye

• Qosmio G30 crashes when loading dvd blank media

  I have a fairly new Toshiba Qosmio G30 laptop. I recently discovered that the DVD-R or CD - R blank media insertion causes the system crash BSOD blue screen of death. At the moment I have not tried with other types of media. However, DVDs and pre-recorded CDs play perfectly well. After the BSOD re-boot system and sends an error report to Microsoft.

  Y at - it a good soul out there who can give me a suggestion as how to solve this problem, is this a known problem or common? I was not able to find anything on Google.

  Gareth has soon

  Accident analysis of Microsoft:
  http://oca.Microsoft.com/en/response.aspx?SGD=d7398fe5-a09f-4446-A827-3c762777fe89&SID=10

  Hello

  According to the Microsoft Online Crash Analysis, the BSOD was caused by the unknown device driver.
  But it's very strange because the device uses a common MS Windows driver for a CD/DVD drive.

  A question: have you used the OS from the Toshiba restore CD or you made some changes to the operating system?

  However, to my knowledge, not all media are compatible and taken in charge. So eventually the error message because of the use of any compatible CD or DVD.
  You will find the information on compatible media user manual.

  -------------
  Update:
  -------------

  Please also check this:

  -Right-click on the DVD drive-> properties
  -Go to the menu point record
  -Enable recording for the DVD player

  Maybe it's now possible to enter a blank CD or DVD

• Want to 750-209: how to connect an old sound system to a new computer

  I wanted a new 750-209 and a former speaker of Cambridge Soundworks PCWorks 19th Point Surround 4 + under low voltage. There are 2 connector; Left and right who are article 3 (each take manages 3 drivers). The envy has 1 output. It seems that I need a derivation ending in female connectors.

  My question? How to connect the two? Is it still possible? I'd hate to have a decent sound system of junk. My needs are basic - just to be able to listen on AOL or YouTube.

  Any ideas on how to accomplsh my goal.

  Just to close this debate; unfortunaely the quick response has not responded to the problem. BestBuy has suggested that I try a composed of derivation of a shot and 2 containers. Finally, I got the system works 'after' discovery that the enormous power brick disliked the new arrangement of power when I replaced the old computer with the desire. I had to replace an adapter 3 - wat and consolidate the brick. A lot of noise to get her old system to work but now I have the choice of speakers or headphones driven by a hold on a HDMI monitor. All's well that ends well. Thanks for the interest.

• Qosmio G30-175-BlueTooth activation and connection

  I have a Quosmio G30 and a Nokia 2760 mobile phone, I want to connect via Bluetooth.
  Nokia PC Suite 7.0.7.0 shows that Microsoft Bluetooth Toshiba and also told me that the parts etc. are missing.
  I can't find anyway to initialsing bluetooth on your laptop.
  What am I doing wrong please?

  How to activate your Bluetooth is read the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ/bluetoothnotworking

  If you are using Windows XP, I recommend you try the following:
  Download the Nokia Data Suite Version v4.88
  http://Europe.Nokia.com/A4143074

• Reading through computer speakers, even when headphones are connected to the sound

  Hello
  When I connect my headset to my dell ispiron 1545, the sound is played through the speakers of the laptop,
  nothing will stop it doing this
  In my playback devices I have

  Speakers/headphones
  IDT high definition audio CODEC

  Independent (RTC) headset
  IDT high definition audio CODEC

  -------------------------------------------------------------
  When I turn off the speakers/headphones, I have NO SOUND at all and I have a small speaker with an x in the corner
  nothing allows me to set the helmet as a defauld, when he says to set as default, nothing happens, as it won't let me change anything in the
  IDT Audio Control Panel
  Also, I am an administrator
  PLEASE HELP AS MY LAPTOP SPEAKERS ARE RUBBISH

  Hello

  Follow the steps in this article and see if the problem still occurs.

  http://support.Microsoft.com/mats/NO_SOUND
  See also: http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-sound-problems

• How to connect a Qosmio G30 to TV?

  I have a Qosmio G30 and a HD ready 37 "TV.
  How to connect the laptop to the TV?

  The cable I have is a SCART on one end to the TV and the other end to the laptop. It says in the manual to do this, then press Fn + F5. It does not work! I tried everything in the manual and results cannot do.

  Any ideas anyone?

  Any help much appreciated.

  It will work you choose the right TV channel. If please activate the right port on the TV and after doing this use FN + F5 and select the TV option. I tested it with my Qosmio G30, but using the HDMI connection.

• InterVideo WinDVR 3 on Qosmio G30-116 via port-> no audio video

  Hello

  I installed Intervideo WinDVR 3 on my Qosmio G30-116. I have connected a decoder for the Qosmio via the video Port for using the cable supplied Toshiba which provides a composite video cable audio two channels to affix the Qosmio. The video works fine but not the audio.

  Intervideo WinDVR 3 "Setup" see section when you select the "Device" tab on the video input is set to "Toshiba PCI DVB - T Tuner hybrid analogue" and hense video works. However, the only options under Audio input are the "SigmaTel Audio" and "Logitech microphone. I put it on "SigmaTel Audio" and under this setting, the only option for source is the 'CD drive '. These are therefore the setting but still no sound from my cable box.

  Any ideas?

  Any other proucts that someone knows of which allow you to use the video in Port of the Qosmio that work really (FYI I can't even make it work with Windows preinstalled Media Center.

  Concerning
  Stephen

  Hello

  Have you tried to use the Qosmio Player or MCE instead of the WinDVR 3?

  How to connect two devices?

  Insert the plug of the output cable to connect to the box set-top to the audio input jacks (Red: audio right, white: left audio) and video input (yellow) of the software component video cable plug-in connector.
  The video port allows you to import video data from analog video cameras or video recorders. To hear the sounds to use the video cable to connect the audio terminals of the device and your computer (Red: its channel right, white: his left channel)

  In the user manual, you will find the detailed how connect the set - top box for the Qosmio and what cables are required.

• can I connect a 5s to a docking station with a Flash 30 adapter to play music with a sound system

  How to connect an iphone 5 s to a docking station that is connected to a sound system to listen to music. Tried with a lightning 30-pin adapter. Sound does not play through the speakers. This method works with my new ipod, but not with the phone.

  Duh. It was too complex. Docking station disconnected and plugged the cord on the plug headphones. Problem solved. But still think that the card should work.

• QOSMIO G30 - no sound on HDMI when connected to HDTV in XP MCE.

  Hello-

  Can anyone help with a frustrating problem... How output sound on HDMI in Windows XP MCE?

  I place the video on HDMI output using * Fn + F5 *-I get a perfect image on my HD TV. However, the sound always comes from my laptop speakers.
  I have all the latest drivers and BIOS downloaded from the Toshiba site.
  I entered the settings audio and Sigmatel and tried everything, in particular by unchecking + 'Activate Dolby Digital Live Support' + within the Dolby tab which is recommended in a support forum.
  Nothing works!

  It's relatively easy in Windows Vista, because you can change the audio device by default for + the device of digital output (S/PDIF) + and which switches to HDMI audio, but there is no option under XP MCE.

  Someone who can help to solve this problem is rewarded with all the points and have total gratitude and respect :-)

  Thank you

  Mark

  It is a Toshiba FAQ:
  + No signal on HDMI on Qosmio G30 under Vista +.
  http://APS2.toshiba-tro.de/KB0/FAQ7A01ZU0005R01.htm

  But he of described the problem with Vista OS.

  However, the screenshot shows the codec high definition audio Sigmatel.
  I guess it is the same device that you can see in the menu drop-down

  Maybe you have to activate it.

• Qosmio G30-116: how to connect to the Sky Digital box to watch TV?

  I recently bought the Qosmio G30-116, with the understanding that I can connect my digital Sky to the laptop (somehow) and watch and record the sky on the laptop

  * note: I do not use TNT or TV I'm on SKY DIGITAL *.
  SINA the converter cable provided to connect the video in on the laptop (video is like a headfone Jack and converter converts to this female RCA/RCA)

  I connected on the laptop and then connect a RCA 3 SCART toward it then in the area of the sky, when you set up the TV section in Windows Media Center, I followed the instructions until it gets to the point where it scans a signal, (before that I wonder what kind of signal that I receive, I select digital but have tried all combinations in) but it does not find a signal.

  Now I was told that Windows Media Center doesn't support analog input and the connection between the sky and the laptop is analog.
  Is this correct or not? then, while typing this I learned by someone else that my laptop is not capable of receiveing SKY DIGITAl as it cannot decode or something. Is that also correct? If not, can what am I doing wrong, and someone help me to get it going? And I go about it the right way or I'm quite the wrong way if the laptop is capable of it?

  Hi Liam

  AFAIK if you are using an external receiver (sat receiver or even sky digital box) the laptop can bring out just what external device send to the laptop. You can connect your external case to the laptop using composite to the port (transfer of video and audio signals). After that, you can start Qosmioplayer and analyze the available channels.

  You will find a program, but the different channels, you must select the box itself. If a channel must be registered, use Qosmioplayer save option.

  The same must be possible with WMCE. I'm not 100% sure but I also think that the connection between laptop and Skype is analog.

  Sorry, but that's all I know about Qosmio. I tested it with Qosmio G20.

• Qosmio G30: Can I use component video software plug-in to connect the Gamecube or PS2?

  The Qosmio G30 has a VIDEO-IN bit for the red/white/yellow wires... So I wondered if this meant that I could connect my PS2/Gamecube/similar to television, playing games on my laptop, save me money when I move to College :)

  Indeed, if I pretend that I'll put up a set - top box for the TELEVISION, the Gamecube appears under "Video Composite", I just can't save like a channel or anything at this point...

  Someone help? Would be very grateful...
  Thankee.

  Hello
  The s-video-in port can be used to connect and to import data from the external device such as an analog video camera or VCR. Imported video can be edited or written on a DVD disc.
  Video port can be used to connect the external device such as a game console

  I think you should also consult the user manual because you will find the full description on unique ports and use.

• No its Qosmio G30 HDMI connection to audio/video receiver

  When I connect my Qosmio G30-177 via a HDMI cable to my audio/video receiver using Windows Vista Ultimate, I get no sound but great video.
  When I connect the recorder DVD to the receiver (also via the HDMI cable) the sound is OK

  What I need to use the s/pdif interface instead of HDMI to transmit sound to the receiver or is it also possible via HDMI?

  Audio driver:
  Codec high definition audio such of Sigma
  15.12.2006
  6.10.5324.0

  Hello

  I m not an expert but I know the HDMI carry audio signals and video audio.
  Format audio HDMI 1.0 and 1.1 support Dolby DigitalDTS
  HDMI 1.2 supports Dolby DigitalDTS and the DVD-Audio format
  The HDMI 1.3 supports Dolby DigitalDTS, DVD-Audio and SACD audio formats.

  All support standards HDMI a type has (19pol) taken

• How to connect PS3 to Qosmio G30-201?

  Hey guys please help

  I can't connect my PS3 to the Qosmio G30-201. I tried with the HDMI cable but do not know how to connect.

  Can any 1 advise me how to connect?

  Thanks in advance

  > I use the hdmi cable to receive brillaint image quality and I tried with the Qosmio player with hdmi cable but couldn't make any image what so ever.

  Dear TV, have you read what other people write here. To send the video signal to the laptop, you use VIDEO IN port. HDMI port on your laptop is probably VIDEO OUT port. Also, it cannot work.
  Read it please user manuals to see which ports are video in ports. This port allows to transfer the video signal in your laptop.

• How to connect a satellite with Qosmio G30-188 receiver?

  Hello!

  How can I connect a satellite receiver to my Qosmio g30-188? I need to connect the AV signal (SCART) on the receiver to the laptop.
  can someone help me?

  Thanks in advance!

  Hello

  I didn't test it with cable SCART, but I presume that you need adapter SCART to connect to your satellite receiver. Here is the image what it looks like.

  On this map, you can connect S-video cable to transfer the picture to your Qosmio. You will find on the right side for laptop S-video PORT. For sound, you can use the audio cable (red/white) with proper adapter

  As I said I n t test it until now. In any case please check manuals s user document. Maybe, you can find some useful information.